Item Status can be controlled for open Sales Order

Hi All,
Is there anyway we impose restriction on changing the status of the item if there are any open Sales Order against it? Example: If an item A is in Active Status and has a Sales Order with Awaiting Shipping Status. Before the order is booked if someone changes the item status to Inactive, is there anyway we can prevent it from changing the status if there are any open Orders against it?
Version: 11.5.10.2
This is urgent please.
Thanks,
Ashish

Hi Sandeep,
Thx for the quick update. I have tried to update the status of an item to obsolete when Sales Order Line exist against the item. It is giving the following error. I have tried with Custom Code off. So my assumption is there should not be any personalization. Can you please look into it further.
This is quite urgent, pls.
Error: "This field can not be updated as there are either Open Sales Order Lines or Pending Delivery Transactions"
Thanks,
Ashish

Similar Messages

Transaction code for Open sales order other than VA05

Hi all,
Can any one tell me what is transaction code for open sales order other than VA05.
Please help me .
Thanks & Regards ,
Srikanth P.

Hi Srikanth,
You can try below options.
1- VA05N - This can be run for multiple sold to party & multiple material, etc which was not in VA05. But this doesn't have all columns in VA05 report.
2 - You can check the sales order tables from transaction SE11 or SE16N
Try with below tables for your requirement.
Sales order Header data - VBAK
Sales order Item data - VBAP
Schedule Line Data - VBEP
Business data - VBKD
Status header - VBUK
Status items - VBUP
Best regards,
Anupa

Tables related for open sales orders

Hi all,
I need to fetch the list of open sales orders
based on the range of customers. I have seen va05
but in that only single customer
is allowed. I want for range of customers based on that list of open
sales orders.
can any tell me for this requirement is any std tcode available if not
what tables I have to use to fetch data.
any suggestion will be rewarded.

Hi ,
can you check these tables in sales
Name Description Uses
LIKP Shipped Lines header
LIPS Shipped Lines detail
VBAK Order header Every order (unless archiving)
VBAP Table fields Every line item (unless archiving)
<b>VBBE</b> Open sales order line items Great file, but be careful. Contents don't reflect orders that do not affect purchasing (go figure).
VBEP Schedule line item
VBFA Document flow Let's you move from order to shipping document to invoice.
VBUK Order status
VBUP Line item detail status
VBFK Invoicing header
VBFP Invoicing detail
<b>Reward pts if found usefull :)</b>
regards
Sathish

Transaction for Open Sales Orders

Hi Experts
can u let me know the Transaction for Open Sales Orders.
Regards,
kumar

you can check the tcode
VA05.
vijay

FM For Open Sales Orders

Can someone tell me if there is any FM to list out the Open and Closed Sales Orders as per indicator?
Thanks,
Archana.

you can check this program.... SDEWUORD
It contains the logic for open sales orders. you can check the routine FORM FILTER_OPEN_ORDERS in th above program it might be helpful for you.
siri...
check this fm also..........OPEN_ORDER_SALES

New Report for Opens Sales order and P.O from Plant and S.Loc

Dear Gurus
We have repory requiement for Open sales order and P.O to deliver from particular plant and S.Loc.
If you have already developed this kiond of report help me inthis case.
Thanks
ramki

closed

Collective deliveries for open sales orders

Is there any process or transaction code for creating the collective Picking for open sales orders.
In my company we are not using the Warehouse management, so we pick the goods manually.
If there is any way plzpost the answer.

Check if VG01 helps you if you enter "K" as Group Type
Cheers

How can i get the open sale orders for given material no and plant

Hi,
I have to retrieve the open sale orders depending on the material number and plant.
For only open sale orders at header level and item level.
I want to use VBUK-GBSTK to find open sale order at header level and
                      VBUP-GBSTA at item level.
Can any one suggest me the best logic as performance is concerned?
Thanks,
Kumar.

hi Prasanth,
select werks matnr from ZVSCHDRUN into table it_plant.
sort it_plant by matnr werks.
select
        vbeln
        posnr
        matnr
        werks
        erdat
        kbmeng
        vrkme
        from vbap
        into table it_vbap
        for all entries in it_plant
        where matnr = it_plant-matnr and
              werks = it_plant-werks.
and again i have to write one more select query for vbup.
am i right?

Report for open sales order

Dear all,
I need to create a open sales order report. Could you please tell me from which table i can get open sales order. Its standard report is VA05 and also I checked in table VBBE. but all record which i get from VA05 are not visible in VBBE table. It means VBBE doesnt carry all pending open records.
Please guide me from which table i can get it or what is the sriteria to get it?
Thankyou very much in advance
Punnet Sharma

hi,
my logic goes like this:
Note: Open cursor is used since we are dealing with huge amnt of data:
* Select orders based on their Delivery status
SELECT vbeln
FROM vbuk INTO TABLE git_vbuk
      WHERE lfstk = 'A' OR lfstk = 'B' .
* Filter selected orders
* Selection using open cursor
DATA: lwa_op_sal_ord1 TYPE gt_comtab.
IF sy-subrc = 0.
    OPEN CURSOR c1 FOR
      SELECT vbap~matnr
      FROM vbap INNER JOIN vbak
      ON vbap~vbeln EQ vbak~vbeln
      FOR ALL entries IN git_vbuk
      WHERE vbap~vbeln = git_vbuk-vbeln AND
            vbak~vbtyp = 'C'.
    DO.
      CLEAR lwa_op_sal_ord1.
      FETCH NEXT CURSOR c1 INTO CORRESPONDING FIELDS OF lwa_op_sal_ord1.
      IF sy-subrc = 0.
        APPEND lwa_op_sal_ord1 TO li_op_sal_ord1.
      ELSE.
        CLOSE CURSOR c1.
        EXIT.
      ENDIF.
    ENDDO.
ENDIF.
here filter orders based on 'A' and 'B' from VBUK...
then frm header table VBAK get order for vbtyp ='C'.
now li_op_sal_ord1 will have open sales orders..
Moreover as per ur query y do u need the item data frm VBAP as u are only concerned abt VBELN.
If u need item u hv 2 run another select.
regards,
ags

Logic for Open Sales order qty

What should be the logic given to determine "open sales order qty" during designing a report.
Note the criterias are as under:
1) Open sales order qty is the confirmed qty less the delivery qty.
2) The delivery qty should be delivery order qty (The delivery should not necessarily be pick, packed & PGI)

sorry it doesn't work for services, since they do not create requirements.
in this case you can use VBFA table, subracting all the delivered quantities VBFA-RFMNG with VBFA-VBTYP_N = J and VBFA-VBELV/VBFA-POSNV = to your order/item from the ordered quantities
hope this help you.
Roberto

Report for Open Sales Orders

Hi..
my client want the report for all open sales orders in following manner :
CUSTOMER NAME         ITEM 1      ITEM 2     ITEM 3 ITEM 4
Customer 1                     23             45           54          76
Customer 2                     10             20           30          50
Customer 3                     40             10           30          10
TOTAL                            73             75          114        136
please let me know the sql query which i can put in crystal report to creat this report
Regards
Rakhi

hI rAK
HERE IS UR QUERY FOR OPENSALES ORDER I THINK THIS WILL SOLVE UR PROB
SELECT T0.[DocNum], T0.[DocDate], T2.[CardCode], T2.[CardName], T0.[DocTotal],
(T0.[GrosProfit]/(T0.[DocTotal]-T0.[GrosProfit])*100)'PROFIT%', T2.[CntctPrsn], T2.[Phone1], T3.[GroupName]
FROM ORDR T0 INNER JOIN RDR1 T1 ON T0.DocEntry = T1.DocEntry
INNER JOIN OCRD T2 ON T0.CardCode = T2.CardCode
INNER JOIN OCRG T3 ON T2.GroupCode = T3.GroupCode
WHERE T0.[DocTotal]!= T0.[GrosProfit] and T0.[DocStatus] ='O'
GROUP BY T0.[DocNum], T0.[DocDate], T2.[CardCode], T2.[CardName], T0.[DocTotal],
T0.[GrosProfit], T2.[CntctPrsn], T2.[Phone1], T3.[GroupName]
REGARDS
JENNY

Function module for open sales order and open PO

hi all,
can anyone please tell me that is there any function module to get open sale order and also for open purchase order?
regards saurabh.

Hi ,
In EKPO Table u select this fields Purchase Document no and Item no of Purchsing Document , Material no , and Purchase Order Qty.
In MSEG Table u select this fields Purchase Document no and Item no of Purchsing Document , Material no , and Qty.
Both Tables having Purchase Document no , So Purchase Doucment no throguh u will get the Material and qty , Finally u Subract the both Material Qty's .
u will get the Open Po For particular Material.
If ur not getting ,Inform me .
Regards ,
Shankar GJ

Table for open sales order

hi all,
i want to take open sale order in my report coming in tcode VA05, so can anyone please tell me from which table can i get it?
regards saurabh.

Hii,
not sure but check in this table
check the table VBBE, it stores open items in the order. VBUP gives the details of the line tiems in the order.
VBBE for open orders and for G/L Account, you can consider tables like BSAD, BSID, BSIS.
regards,
Archana

Open Order Quantity for open sales orders

Is there a standard SAP Report that gives the open order quantity for every open sales order. "Open" is defined as any order quantity that has not shipped. Delivery creation is not the same as shipment. VA05 Report does not contain enough information to calculate the open order quantity for an ERP-based backlog report.

Try VA05 schedule lines standar variant...include status fields and both ordered qty and confirmed qty. In SAP standard system order status, status A means open orders fully (Nothing shipped, everything opened). Status B means in process orders (Partially processed - shipped). Status C means complete orders (Nothing opened). As there is no delivered qty in VA05, you need to download to excel the file and calculate the difference between both qty fields for each A and B status. That is a way to get the missing qty to be delivered or open qty as you stated.
Hope it helps.
Jorge Fernandez

MRP not considering open purchase orders when planning for open sales order

Dear Experts,
1.I have open sales orders as well as planned Independent requirements for finished goods for the current month. Also I have open puchase orders for raw materials which is part of the Bill of material of the finished goods for the current month.
Please what do i need to do to make MRP consider my open purchase orders when the system is planning for the open sales orders.
2 what tcode can I use to delete all purchase reuisitions in the sytem

There was no response to these questions so i had to close it to make space for another

Item Status can be controlled for open Sales Order

Similar Messages

Maybe you are looking for