ItemField Conversion Agent - ContentMaster Studio

Hi
I'm trying to convert an XI-XML Message to HL7-XML Message and not HL7 Flat file . I would like to use ItemFiled ContentMaster Studio and develop a Serializer to read the XI-XML Document and Convert it to HL7 XML Document which needs to sent across to FDA . I trying to get some material on creating Serializer i couldnt find any . If somebody could give me some link or some ideas it would be great . I did come across a white paper written by Prasad Illapani which is using library for the HL7 . Unfortunately my requirement is not there as part of the standard library .
eMDR - Electronic Medical Device Reporting Using HL7 for Individual Case Safety Report . (HL7 ICSR XML File) .
I appreciate any links and pointers .
Thanks
Sudhir

Hi,
Check this blog
/people/william.li/blog/2006/03/17/how-to-get-started-using-conversion-agent-from-itemfield
Thanks,
venkat

Similar Messages

  • INVOIC96a to EDI-XML by Conversion Agent fails, Special Character Problem

    Hi,
    with your help in another thread, I recognized that the EDIFACT INVIOC96a Parser of the Itemfield Conversion Agent has a Problem with special characters.
    So like described in this blog SAP XI supports EDIFACT i created a Library Project and tried to test the conversion.
    It is only working when no special characters are in the EDI file. If there a special characters insight the file, conversion agent say's no error, but the xml file is corrupted. In fact you can't display it in IE or by opening it with XMLPad it says "Not well formed".
    Hope that someone has an idea for this problem
    Thank you
    regards

    Hi,
    I have already faced the same problem when using Itemfield Conversion Agent.
    I solved the same with change properties of the project.
    In conversion agent project :
    opne the menu :  Project --> Properties --> Encoding --> Change the output Encoding Schema (None).
    use None in that schema in place of XML.
    Your problem can be solved.
    Regards,
    Sandeep Kaushik

  • Use of Conversion Agent

    Hi Guys can any one give me a brief overview of conversion agent by SAP for EDI interfacing....
    Detailed workflow is appreciated.

    hi
    check the below blogs
    CONVERSION AGENT                                                  
    TO IMPLEMENT CUSTOMIZING CONVERSION IN XI                                                  
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/10a2d61b-098d-2910-7d9e-ea14af4d01eb                                                  
    How to get started using Conversion Agent from Itemfield                                                  
    How to get started using Conversion Agent from Itemfield                                                  
    Conversion Agent - Silence of the RepeatingGroup (Part 1)                                                  
    Conversion Agent - Silence of the RepeatingGroup (Part 1)                                                  
    Conversion Agent - Silence of the RepeatingGroup (Part 2)                                                  
    Conversion Agent - Silence of the RepeatingGroup (Part 2)                                                  
    Mr. (Conversion) Agent in 'Mark the Marker' Case                                                  
    Mr. (Conversion) Agent in 'Mark the Marker' Case                                                  
    Conversion Agent a Free Lunch?                                                  
    Conversion Agent a Free Lunch?                                                  
    More on the SAP Conversion Agent by Itemfield                                                  
    More on the SAP Conversion Agent by Itemfield                                                  
    You Can Use (Semi-) (Non-) Structured Data in SAP NetWeaver                                                  
    You Can Use (Semi-) (Non-) Structured Data in SAP NetWeaver                                                  
    Integrate SAP Conversion Agent by Itemfield with SAP XI                                                  
    Integrate SAP Conversion Agent by Itemfield with SAP XI                                                  
    News around SAP Conversion Agent                                                  
    News around SAP Conversion Agent                                                  
    regards
    kummari

  • ** Itemfield Conversion - ContentMaster Studio Eclipse - error when create

    Hi friends,
    I have installed 'ContentMaster Studio Eclipse' software in our system. It throws the following error when we click File --> New --> Project.
    Error:
    Internal error logged: Could not create IFCMFramework. CFramework control.
    Error details can be found in log file.
    Unable to read workbench state. Workbench UI layout will be reset.
    Eclipse:
    Problems during startup. Check the ".log" file in the ".metadata" directory of your workspace
    What could be the problem ..?
    Kindly help us to solve this.

    Hi,
    Check this blog
    /people/william.li/blog/2006/03/17/how-to-get-started-using-conversion-agent-from-itemfield
    Thanks,
    venkat

  • Conversion Agent Studio in XI

    Dear All,
    I am working in a XI development project and here I have a scenario to convert the PDF document (Purchase Order) into XML document and use the same to create a sales order by using Process Integration.
    For the above scenario, I found that we need to install Conversion agent studio in SAP PI system and use the same to generate the XML out of PDF document.
    I have already deployed the software in SAP Netweaver. Now I have no idea how to use this software and where I will get this in my SAP NW system.
    Many thanks & Best regards,
    Arun

    Hi,
    please go through these
    /people/alexander.bundschuh/blog/2006/03/14/integrate-sap-conversion-agent-by-itemfield-with-sap-xi
    /people/paul.medaille/blog/2005/11/18/conversion-agent-a-free-lunch
    https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/3332- [original link is broken] [original link is broken] [original link is broken] How To Get Started Conversion Agent
    Reward Points if Helpful
    Regards
    Sesha

  • SAP Conversion Agent Studio Preview Version

    Hi,
    Does anyone have knowledge about SAP Conversion Agent Studio Preview Version?
    I've downloaded it from SDN and it says it comes with an Eclipse version, but i doesnt.
    When i try to point it to my existing Eclipse it says it needs version 2.1.2 oe 2.1.3. of Eclipse, but these are quite old. They can be downloaded from a 2004 archive site. (?)
    Are there newer version of the SAP Conversion Agent Studio Preview Version?
    Any suggestions are welcome.
    Thx
    Robert

    Hi Conversion Agent experts,
    Do you have any ideas?
    Thx
    manuku

  • Qery related to Conversion Agent Studio installation

    Hi All,
    I have a query related to Conversion Agent. We have downloaded the SAPNWCM20_0-20001444.SCA file and installed the conversion agent engine on SAP XI J2EE engine which is basically installed on Sun Solaris system.
    I want to use conversion agent studio at a remote place on Windows OS 32 bit system.
    Please help me
    1) how to install the <b>conversion agent studio on windows 32 bit system.</b>.
    2)<b> Is it possible to install conversion agent studio on Windows 32 bit system because Conversion agent engine is installed on Sun Solaris system.</b>
    Thanks & Regards
    Prabhat

    Hi Can you please elaborate more on installation of conversion agent studio as the document mentioned in the link is not in details regarding installation of conversion agent studio.
    Thanks & Regards
    Prabhat

  • Installing Conversion Agent studio

    Hi
       We are on XI 3.0 SP18 and want to try out using conversion agent 1.0 for a scenario. 
    I downloaded file SAPNWCM18_0-10003671.sca.zip from service.sap.com and then try to install converstion agent studio on my Windows XP desktop - as per instructions - I am asked to extract the ConversionAgent.sda file - and then run one of the *exe file that was extracted from the sda file . However I do not see any exe file in the contents of the ConversionAgent.sda file - Is this the sda file that contains conversion agent studio and the conversion agent engine ?  If so, how do I go about installing the studio and the engine on my desktop - ?

    Nilesh
               Thanks for the reply. In my case, when I extract the ConversionAgent.sda file using winzip - I do not see any *exe file in the extracted files - I see only the following four files
    Setup_Aix.bin
    Setup_Aix.bin_imp
    pathWithoutDot
    wc
    along with a couple of folders assemblies and Meta-inf.
    Just to repeat, I downloaded the SAPNWCM18_0-10003671.sca.zip file from service market place for my aix 64 bit system on which XI resides. I get my ConversionAgent.sda file by extracting the above zip file

  • Conversion Agent Error - CMException

    Hi ,
    We are trying to map an excel file to another system using conversion Agent for transformation. We have created the transformation in the Conversion Agent Studio and deployed the service in our integration engine on XI Server(in the serviceDB folder).
    But the file is not getting transformed and the message is failing in the communication channel only giving the below errors . ( Runtime WorkBench - > Communication Channel monitoring ) .
    The source file is getting picked up from the respective folder where it has been placed, and also the TransformBean is being called too.
    "Attempt to process file failed with com.itemfield.contentMaster.CMException".
    "Transformation failed : CMException : Failure while trying to create engine log .
    D:/ConversionAgent/Log/Init/Events.cme"
    Please let us know what parameters we have missed out due to which we are getting this error.
    Thanks
    Satish

    Hi refer this link may be helpful
    have a look at the following(page 8 for conversion agent)
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9913a954-0d01-0010-8391-8a3076440b6e
    /people/alexander.bundschuh/blog/2006/03/14/integrate-sap-conversion-agent-by-itemfield-with-sap-xi
    /people/paul.medaille/blog/2005/11/18/conversion-agent-a-free-lunch
    /people/william.li/blog/2006/03/17/how-to-get-started-using-conversion-agent-from-itemfield- [original link is broken] How To Get Started Conversion Agent
    /people/william.li/blog/2006/03/17/how-to-get-started-using-conversion-agent-from-itemfield
    http://help.sap.com/saphelp_nw04/helpdata/en/43/6f3f4347336fc9e10000000a1553f6/CMSap.pdf
    in this document:
    http://help.sap.com/saphelp_nw04/helpdata/en/43/6d960dac846fcbe10000000a1553f6/CMAdminGd.pdf
    To check with your installation and configuration refer following blog
    /people/william.li/blog/2006/03/17/how-to-get-started-using-conversion-agent-from-itemfield
    Thanks!!
    Pls reward if useful

  • SAP Conversion Agent: HL7 library project could not be executed

    Hi experts
    I'm using SAP Conversion Agent version 4.3.0 on a PI 7.0. I'm trying to use a HL7 library project. On the Conversion Agent Studio side everythings works fine: the library project is created and a test of the service with a local HL7 file was successful. After that I make the project on the Conversion Agent Studio available and copy the project from the local \SAP\ConversionAgent\ServiceDB directory to the PI Conversion Agent ServiceDB directory.
    So far so good... but when I try to execute the CA project via File Sender Adapter the following error is thrown:
    "Invalid service 'TEST'. Check service name and service database"
    Module Exception 'com.sap.aii.af.mp.module.ModuleException: <Status><severity>4</severity><description>Invalid service 'TEST'. Check service name and service database.- for more information see file:///usr/sap/DXI/ConversionAgent/CMReports/Tmp/2009-12-23/nonexistent_U-_-63-4b17e36f-5e83/Events.cme</description><log_file>file:///usr/sap/DXI/ConversionAgent/CMReports/Tmp/2009-12-23/nonexistent_U-_-63-4b17e36f-5e83/Events.cme</log_file><Event error_code="401024" severity="error_fatal">
    <description>Invalid service 'TEST'. Check service name and service database.- for more information see file:///usr/sap/DXI/ConversionAgent/CMReports/Tmp/2009-12-23/nonexistent_U-_-63-4b17e36f-5e83/Events.cme</description>
    <time>N/A</time>
    </Event>
    </Status> caused by: com.itemfield.contentmaster.CMException' found, cause: com.itemfield.contentmaster.CMException
    I also created another parser project, without HL7 libraries, this works also on Conversion Agent Studio and on PI side without any problems.
    Do you have any ideas?
    Thx,
    manuku

    Hi Conversion Agent experts,
    Do you have any ideas?
    Thx
    manuku

  • Error in Conversion Agent Module

    I have tried to set up a scenario using conversion agent to transform a PDF file to XML. I followed the instruction steps in this blog <a href="/people/william.li/blog/2006/03/17/how-to-get-started-using-conversion-agent-from-itemfield:///people/william.li/blog/2006/03/17/how-to-get-started-using-conversion-agent-from-itemfield  .But the communication channel can't work properly. I check the status of communication channel in RWB, and it gives following error message:
    2007-03-14 10:22:00 Success Channel InvoicePDF_Sender: Send binary file  "C:SharefolderDemoinvoice.pdf". Size 14378 with QoS EO
    2007-03-14 10:22:00 Success TransformationName: InvoicePDF
    2007-03-14 10:22:00 Error Transformation failed; CMException: Failure while trying to create engine log C:/Documents and Settings/admin/Application Data/SAP/ConversionAgent/CMReports/Init/Events.cme- for more information see file://internal
    2007-03-14 10:22:00 Error Attempt to process file failed with com.itemfield.contentmaster.CMException
    However I have already granted the access permission of the event folder to user "<sid>adm" and "SAPservice<sid>". Even grant full control access to everyone for the folder, the issue remains unsolved. Hope someone can help to give some advice on my case. Thank you in advance.

    HI,
    The module name must be localejbs/sap.com/com.sap.nw.cm.xi/CMTransformBean.
    The parameter name must be TransformationName.
    The parameter value must be the conversion agent project name deployed in serviceDB. In the above example, the Tutorial_3 project from the documentation in step 1 is used.
    And also it was failed to update the log.See the folder access onceagain.
    many links provided in that blog itself ,plz check.
    Regards
    Chilla..

  • Help for Using Itemfeild Conversion Agent

    Hi all,
    i have read several blogs and formus on the use of Conversion Agent software for performing EDIXML To EDI format conversion. Here is the problem i have.
    we are doing an IDOC to File scenario and in the Filesender adpater we need to configure and module which does the necessary conversions(EDIXML to EDI-834). I created an Serializer using Content Master Studio and deployed the project to the Content master Engine on the XI server. When i give the transformation paramters which are mentioned in the blogs below
    /people/william.li/blog/2006/03/17/how-to-get-started-using-conversion-agent-from-itemfield
    /people/alexander.bundschuh/blog/2006/03/14/integrate-sap-conversion-agent-by-itemfield-with-sap-xi
    SAP Conversion Agent
    There are no erros shown in the SXMB_MONI or either in the Adpater Framework, but the target file is not being created. can anyone please advice me about how the module name should be set in the File Adpater(SP 17) and how can i check the erros in the conversion module in XI.

    Julie,
    Can you please pass the information if you have resolved the problem?
    Ravi

  • XML to EXCEL with Conversion agent error: XML to EXCEL PROCCES FAILD

    Hello,
    I have scenario from Oracle database to Excel.
    For this scenario I use with conversion agent by itemfield to transfer data from XML to EXCEL.
    The scenario not worked.
    Few points:
    1. I add the conversion agent module to SAP XI receiver communication channel.
    2. When I change the scenario to oracle to xml (without using conversion agent) the scenario works OK.
    3. When I drag the CME file to the studio I found the error message: XML to EXCEL PROCCES FAILD.
    4. I use with conversion agent in other scenario (EDI to IDOC) without any problem.
    5. I'm not found any clue for this problem in XI RWB.
    Elad

    hi Elad,
    to do the conversion,you have to define a module and import it into you CC.
    also see nexts blog
    Yet another "from database or internal table to Excel"
    Reading Excel Data from Java Using HSSF API
    Reading Excel line items using the jExcel API
    Read Excel instead of XML through FileAdapter
    Thanks
    Rodrigo

  • Conversion Agent - Help for scenario.

    Hi Experts,
    We are working on Conversion Agent for EDI - XI - IDOC, creating Parser in Conversion Agent, when we are using the same in Communication Channel, the file is not picked up from EDI Folder.
    It is giving us one error "Error: java.lang.NullPointerException".
    May be we are not creating the complete scenario and making some mistake in the scenario.
    We have read many blogs and threads on SDN, but it is not making any help in our condition.
    If anybody have complete scenario with screen shot, please give us that as it is urgent.
    Please help,
    Regards,
    Study SAP

    Hi Lawrence,
    Thanks for your reply,
    There is only one project and at CMD when we are trying to run it is running fine,
    in the result is creating XML Message.
    we have these errors in our Communication Channel Monitoring :
    Transformation failed; CMException: Failure while trying to create engine log C:/Documents and Settings/Administrator/Application Data/SAP/ConversionAgent/CMReports/Init/Events.cme- for more information see file://internal
    Attempt to process file failed with com.itemfield.contentmaster.CMException
    Is the problem related to our project or with our deployment ?
    Please help,
    Regards,
    Study SAP

  • Help required regarding Integrating Conversion Agent with SAP-XI

    I want to run a simple File to File scenario which involves integrating conversion
    agent. I gone through a webblog:Integrate SAP Conversion Agent by Itemfield with SAP XI
    I deployed the module and I configured the channel in the same way what was specified in the webblog.
    But when I run my scenario I found CM_TRANSFORMATION_ERROR as the error in communication channel monitoring.
    Can u please provide me the solution for correcting the above error, this would be a great help for me..

    HI,
    see the below links
    http://help.sap.com/saphelp_nw04/helpdata/en/43/6f1f39a08e6fcae10000000a1553f6/CMSUserGd.pdf
    http://help.sap.com/saphelp_nw04/helpdata/en/ee/c9f0b4925af54cb17c454788d8e466/frameset.htm - cc
    http://help.sap.com/saphelp_erp2005vp/helpdata/en/95/bb623c6369f454e10000000a114084/content.htm - fcc cOUNTER
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/da1e7c16-0c01-0010-278a-eaed5eae5a5f - conversion agent
    with item fiels.
    Regards
    Chilla

Maybe you are looking for

  • Oracle 10G/11G with JBuilder

    Hi Gurus, I am new bie in the Java development world. I am looking for purchasing a laptop on which I can install Oracle (either 10G or 11G does not matter) and JBuilder as the project on which I am going to work on uses JBuilder tool. I have two que

  • Uninstall Partner Connectivity Kit (PCK)

    Hi experts ! I installed PCK on XI system.Now, how to remove it to switch to XI Adapter Framework. Thanks a lot Edited by: vn thach on May 25, 2009 12:08 PM

  • How to limit download speed in Adobe Scout using Flash CC

    Hello, since bandwidth profiler is no longer available in Flash CC (???) I've read in the help that I should use Adobe Scout for that but I can't find explanations of how am I to do it. I want to limit the download speed and thest how the .swf behave

  • PO pricing procedure

    Hi guys, What tcode or SPRO path should I go to to see pricing procedures maintained for PO's? Thanks!

  • Slow logout on remote connection.

    If I use CDE, I login and out fast. If I use JDS, I login and out takes forever. Is JDS so much more resource intensive?