ITS URL with two slashes when using namespace

Hi, experts!
We are experiencing a strange behavior with the generated URL of an ITS service.
The problem: We use our own namespace. Therefore, all objects get a prefix when created. Our internet service is called e.g. /BLABLA/MYCORE. When uploading MIMEs to our server, they can be accessed via this URL: http://10.10.10.10:8000/sap/public/bc/its/mimes//blabla/mycore/01/images/logo.png.
Can you see the two slashes in the URL? The funny part is that the URL works!
However, we are not sure, if this URL can lead to problems?
Do you have any ideas?
Thx, Silvia

Hi Oisin,
we develop in a package with our own namespace, e.g. "/blabla/". According to SAP naming conventions, the internet service must start with the same prefix. I called my internet service "/blabla/mycore".
Apparently, this name is used to create the URL for the mimes (e.g. http://10.10.10.10:8000/sap/public/bc/its/mimes//blabla/mycore/01/images/logo.png). If I would have called my service "zmycore", the URL would be http://10.10.10.10:8000/sap/public/bc/its/mimes/zmycore/01/images/logo.png.
Unfortunately, I cannot change the MIMEs URL as it is automatically generated by the system.
Regards, Silvia

Similar Messages

I have a Lumix G2 camera with two lenses, when I take RAw pics I Convert them using the Adobe RAW co

I have a Lumix G2 camera with two lenses, when I take RAw pics I Convert them using the Adobe RAW converter. Now I have bought a Lumix 25 macro lens and it will not convert these pics into a readable file

That's strange. The lens shouldn't have made any difference. Does the camera do JPG OK with that lens fitted? Did the samera come with software to convert RAW files, and if so, does it work on the problem files?
When I checked your camera against this list, I see it has two entries for the required version, so I suspect that the lens electronics require a slightly later version of ACR. If I am right, you'll have Camera RAW 5.7 and you need 6.1 So what version of Photoshop do you have? You need CS5 to support ACR 5.#
http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
If you have CS4, then you'll need to install the latest DNG conversion software, which is free. You'll then be able to open the files in Photoshop CS4

Problem with two monitors while using Photoshop, windows move from 2nd screen to 1st screen.

Problem with two monitors while using Photoshop, windows move from 2nd screen to 1st screen.
I saved a new workspace and it did not help.
No problem before I went to Maverick.

I found the fix, go to System Preferences and open Mission Control and uncheck the box to keep monitors as they were (When switching to an application...........)

I did not realize Ilife was already on the new mac, and installed I life from a disk. Now Iphoto has a circle with a slash, when trying to open is says (you can open iPhoto because is may be damaged or incomplete. ?

I did not realize Iife was already on the new mac, and installed I life from a disk. Now Iphoto has a circle with a slash, when trying to open is says (you can open iPhoto because is may be damaged or incomplete. ?

This sounds different than with my IOS devices, since I am able to see the photos even with a connection to the Internet.
Do you mean without a connection to the internet? With a connection it's logical you would be able to see the PS.
The following is from iCloud: Photo Stream FAQ
Can photos be saved or downloaded from a shared photo stream?
Yes. Once photos are shared, anyone who can view the shared photo stream can download and keep the photos permanently.
On a device using iOS 6 or later, you can save photos to the Camera Roll. On a Mac, using iPhoto 9.4 or Aperture 3.4, you can save photos from the shared stream to your local Photo Library or any other location on your Mac. On a Windows PC, you can copy photos from a shared photo stream to any folder. On the web, photos can be downloaded directly to your computer from the detail view of each photo.
This tells me that the image files are not on the HD unless the subscriber chooses to download them.

HT4623 Anyone have trouble with iPhone 5c when using Siri?

Anyone having with iPhone 5c when using Siri?

I have a problem when I am using the SIRI and have # contacto, for example mark with siri #995012607.

Own Photoshop CS5.1 installed on two iMacs, when using second iMac, rarely used,got error message ~"not authorized to use program" on this second iMac I have two accounts one in my name one in my wife's both share photoshop...was in my wife's account when

Own Photoshop CS5.1 installed on two iMacs, when using second iMac, rarely used,got error message ~"not authorized to use program" on this second iMac I have two accounts one in my name one in my wife's both share photoshop...was in my wife's account when I got message...never happened on my primary iMac on which I have my own account and one for guest account that doesn't share photoshop....what is wrong..am allowed to install program on two machines?

Customer Care would have the authority to reset activations. We are basically users such as yourself and can't do this.
Contact Customer Care
Gene

Can I use external speakers with the iPad when using Facetime?

Can I use external speakers with the iPad when using Facetime? How do I do that?

They have to be either plugged in via headphone jack or the dock port at the bottom. If you can. I've used it on apple tv, but that's it. I don't know if the others work, but I don't see why not. Try plugging in speakers in the headphone jack. You will get an answer :)

In a group text with two phones that use Imessage and one that does not. The person that does not, does not get my message when its sent in group text. How do i fix this?

I have a group text with two of my friends. here's each person break down
person 1 ATT network, using imessage
person 2 verzion network, using imessage
person 3 verzion network, using SMS
All three of us are in a group chat. When person 1 sends a message, person 2 recieves it, but person 3 does not. Then when person 3 sends a message, both person 1 and 2 get it. When person 2 sends an Imessage, person 1 and 3 get it
so the problem is when person 1 sends an imessage, it doesnt change to sms and person 3 doesnt get it, but person 2's automatilly switches it to green.
How can person one get their phone to automaticlly switch it to green in group message while keeping on imessage?

The quote below from http://support.apple.com/kb/HT5760 indicates that it in the situation you describe it should be going as MMS to everyone -- which is not what you are seeing actually happen (and also not what you want to happen if I understand correctly). There may be something else helpful in the link.
Group messages will be sent using iMessage if all recipients have iMessage enabled. If not, the conversation will be sent as MMS. Group messages use MMS even if the content is text only.

Operating system not found when deploying to machines with two hard drives using MDT 2013.

Computers with two hard drives will not boot after the install OS step in the task sequence. I get the "An operating system wasn't found. Try removing drives that don't contain an operating system" error. I am able to get the
machine to boot by swapping the hard drives' boot order, but the task sequence won't complete after this. The deployment works fine on machines with one hard drive, and I'm not getting any errors from the task sequence. I'm deploying windows7
enterprise x64 using MDT2013. This is a new custom image and task sequence generated using MDT2013. I can't remove the second hard drive because there are scripts that run on the second hard drive during deployment and also because I don't desire
to remove and re-install 250 hard drives. I've not experienced this problem with earlier versions of MDT.

The bdd.log file you sent does not show two internal drives, it shows only one.
Console > Please wait while DiskPart scans your configuration... ZTIDiskpart 12/16/2013 9:57:04 AM 0 (0x0000)
Console > DiskPart has finished scanning your configuration. ZTIDiskpart 12/16/2013 9:57:05 AM 0 (0x0000)
Console > DISKPART> ZTIDiskpart 12/16/2013 9:57:05 AM 0 (0x0000)
Console > Disk ### Status Size Free Dyn Gpt ZTIDiskpart 12/16/2013 9:57:05 AM 0 (0x0000)
Console > -------- ------------- ------- ------- --- --- ZTIDiskpart 12/16/2013 9:57:05 AM 0 (0x0000)
Console > Disk 0 Online 60 GB 60 GB ZTIDiskpart 12/16/2013 9:57:05 AM 0 (0x0000)
Console > DISKPART> ZTIDiskpart 12/16/2013 9:57:05 AM 0 (0x0000)
Console > Volume ### Ltr Label Fs Type Size Status Info ZTIDiskpart 12/16/2013 9:57:05 AM 0 (0x0000)
Console > ---------- --- ----------- ----- ---------- ------- --------- -------- ZTIDiskpart 12/16/2013 9:57:05 AM 0 (0x0000)
Console > Volume 0 D DVD-ROM 0 B No Media ZTIDiskpart 12/16/2013 9:57:05 AM 0 (0x0000)
Is this the problem?
Keith Garner - keithga.wordpress.com

SQL Developer 3.2 crashes with java error when using OCI/Thick Driver

I just installed SQL Developer 3.2 on my linux desktop. SQL Developer crashes with a java error when I select a database from the object tree.
When I check Use OCI/Thick driver the application will crash when I navigate to the tree and open a database.
The app does not crash then I have Use OCI/Thick driver unchecked.
Here are some details of my environment:
Desktop OS: Fedora 17 Linux
$ uname -a
Linux 3.5.1-1.fc17.x86_64 #1 SMP Thu Aug 9 17:50:43 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux
Java:
$ java -version
java version "1.6.0_34"
Java(TM) SE Runtime Environment (build 1.6.0_34-b04)
Java HotSpot(TM) 64-Bit Server VM (build 20.9-b04, mixed mode)
Oracle instant client:
$ sqlplus -V
SQL*Plus: Release 11.2.0.3.0 Production
Here are the error messages:
$ sqldeveloper
Oracle SQL Developer
Copyright (c) 1997, 2011, Oracle and/or its affiliates. All rights reserved.
# A fatal error has been detected by the Java Runtime Environment:
# SIGSEGV (0xb) at pc=0x00007f6de7157664, pid=3049, tid=140109371119360
# JRE version: 6.0_34-b04
# Java VM: Java HotSpot(TM) 64-Bit Server VM (20.9-b04 mixed mode linux-amd64 compressed oops)
# Problematic frame:
# V [libjvm.so+0x516664] unsigned+0xd4
# An error report file with more information is saved as:
# /tmp/hs_err_pid3049.log
# If you would like to submit a bug report, please visit:
# http://java.sun.com/webapps/bugreport/crash.jsp
/opt/sqldeveloper/sqldeveloper/bin/../../ide/bin/launcher.sh: line 544: 3049 Aborted (core dumped) ${JAVA} "${APP_VM_OPTS[@]}" ${APP_ENV_VARS} -classpath ${APP_CLASSPATH} ${APP_MAIN_CLASS} "${APP_APP_OPTS[@]}"

I also had the problem of SQL Developer crashing when using OCI/Thick driver but I've managed to solve it. My configuration is:
- Windows 64-bit
- Java 64-bit (1.6.0.34)
- SQL Developer 3.2.09 64-bit
- OCI Instant client 11.2.0.3 64-bit (without installation).
The thing that solved the problem was copying two files, ojdbc5.jar and ojdbc6.jar, from Instant client installation folder to JAVA_HOME/lib/ext folder+.
After that, I haven't had a single crash or error message.
The same trick that solved the problem on 64-bit installation also solved the problem on another windows computer with 32-bit SQL Developer installation.

Ibook G4 having problem with airport connection when using secure network

Hi,
I am currently using a brand new Macbook. I am connected wirelessly to a Comcast network through my Netgear Wireless-N 150 router model WNR 1000. The problem I am having is with the 4 year old ibook when I go to use the airport and connect to my existing network it says the password is incorrect. I spent time troubleshooting this with Netgear and basically we found out that the ibook does connect with the network when there is no security at all.
I erased the hard drive on this ibook to prepare it for sale and it is back to the factory settings. Is there some kind of firmware or drivers I am missing to use the airport as described?? I want to be able to show the buyer that the internet works etc. I also may want to install a few things on the ibook before the sale.
Thanks a mil
Message was edited by: omshanti

Did you reset the wireless router to see if by default, it has a different
wireless security then, than however it presently is set up?
The question you pose appears to be marked "answered or solved."
When you reinstall an OS X, the setup asks if you have an existing
wireless connection, or if you will be getting a new one; by default,
the setup will make the existing one the automatic one for OS X.
You should not have to add passwords or other, unless there has
been one set in KeyChain or for the specific wireless base in question.
Tiger 10.4.x does not require you to have a set password for wi-fi,
but you will find several levels of secure options available in OS X.
Not sure why your setup and configuration is problematic. Usually,
a totally new OS X installation is without issue. Sometimes, you
may have to administer a base station via Ethernet cable before
some configurations can use it, but an existing network should be
easy, unless it already has a password security in place.
The Mac will work without a password-protected wi-fi internet source;
often it will 'just work' even when moved to a new environment and
a neighbor's network, if not password protected, will appear among
other options in your vicinity and it will be automatically available.
Not sure if any newer OS X update parts, from the Combo update
files to take Tiger 10.4 to 10.4.11, plus others, would help the Mac
connect better to whatever wireless source of internet available.
I've not had that issue, as you state, except for when someone has
a protected network or passwords in place. Mine has passwords to
keep unauthorized neighbors from easy access; just in case.
In remote locations where few neighbors exist who could access wi-fi
from a lone source, no wireless security settings at all, work just fine.
I've done that; and found a little greater range was gained in signals.
And in the city (largest town in state) a computer I'd set up for use in
a password protected wi-fi network - later worked fine and found the
new owner's own wi-fi network without issues; and I had let the OSX
setup assistant do its job. If a local network is protected by WEP or
WPA2, etc with a password, one would be needed to access it. If not,
then the connection should be automatic.
Good luck & happy computing!

No contact with DHCP server when using VPN Client

Pretty weird problem I discovered recently.
We use the VPN Client to connect to a 1841 router. Everything works fine except for one small thing.
The client do not send out _any_ traffic if the destination is the ip-address of the DHCP-server the client got its original ip-address from.
This is verified by Wireshark. A ping on the client do not produce any ESP packets towards the VPN concentrator. No matter what traffic you try actually.
Discovered this when wanting to use Remote Desktop towards the Windows Server that is the local DHCP server and was not able to connect. Then tested ping and still no response. That made me look closer and found out that I could not communicate at all with the DHCP server.
As I said, pretty weird.
Anyone else have seen this? Anyone have a solution? Right now I use OpenVPN instead when I need to control that server.
- Roger

Hi and thanks for responding.
Nothing here apart from being unable to send any packets to the dhcp-server. No problem sending to any other system on the same subnet. The same happens when I connect my pc to another subnet that is served by another dhcp-server. Then I can not connect to _that_ dhcp-server. I can then of course connect to the previous dhcp-server.
I mean _no_ packets are generated out the client at all if the destination are your dhcp-server. No problem with the packet being blocked by a firewall or anything like that. Ping another system on the same subnet as the dhcp-server and the client happily generates ESP packets and sends them to the vpn-concentrator.
I do not know if it was clear enough in the first post so I am saying it here: the vpn-concentrator gives out the ip for the vpn connection. The dhcp-server I can not connect to is the server that gives the client its ip-address _before_ starting up the vpn client.
We use this vpn system so the IT personell will be able to connect to restricted resources from their laptops anywhere in the network, also when using wireless.
This was discovered when one admin wanted to connect from his laptop to a server that also happened to be the dhcp-server that had given his laptop his ip address before he used vpn.
Should be easy enough for anyone else to test. Just ping your dhcp-server after starting the vpn connection. No RFC 1918 addresses of course, there must be a route from your vpn-concentrator to your dhcp-server and at least icmp echo must be open through any firewall/acl.
The vpn version is 4.8.00.0440 on Windows XP configured to not allow local LAN access. I might test this with other versions/OS'es when I have the time.
Regards,
- Roger

I have one itunes account with two phones. when i phone one of the numbers both phones have started to ring, only when connected to wifi at home. How do i resolve this please?

I have one itunes account with two phones assigned to it, sons and daughters, (5s). When i phone one of the numbers both phones have started to ring, only when connected to wifi at home. The problem does not occur when not connected to wifi. How do i resolve this please? texting is fine it is only when ringing one of the numbers.

<http://support.apple.com/kb/HT6337>
"To turn off iPhone Cellular Calls on a device, go to Settings > FaceTime and turn off iPhone Cellular Calls."

[SOLVED]Xorg crash with some applications when using double screen

Hi,
I have a TV that I often use to watch dvd from my computer, and to do that I've set it up as a second screen in my xorg.conf, but on a daily basis I use a xorg.conf file with only my main screen. Up until last week I was able to use my second screen without problem, but yesterday I tried and it crashed instantly.
So I ran a few tests, amsn and vlc seems to be 2 applications that makes X crash (though there might be other, but I seem to be able to use chromium firefox and ktorrent just fine).
My WM is not to blame, I've launched X without any WM and vlc still makes X crash.
The problem does not happen when using a single screen.
I thought that my xorg.conf might be the problem, so I used nvidia-settings to create a new one, but that didn't change anything.
Here are my xorg.conf used for dual screen, and the logfile from the Xorg crash:
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder62) Wed May 27 01:58:49 PDT 2009
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
Screen 1 "Screen1" RightOf "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
Option "Xinerama" "1"
EndSection
Section "Files"
EndSection
Section "ServerFlags"
Option "Xinerama" "1"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputClass"
Identifier "Keyboard Defaults"
MatchIsKeyboard "yes"
Option "XkbLayout" "fr"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Lite-On e1770NSL/T"
HorizSync 30.0 - 70.0
VertRefresh 50.0 - 160.0
Option "DPMS"
EndSection
Section "Monitor"
Identifier "Monitor1"
VendorName "Unknown"
ModelName "CRT-1"
HorizSync 31.5 - 64.0
VertRefresh 56.0 - 75.0
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 8800 GT"
BusID "PCI:1:0:0"
Screen 0
EndSection
Section "Device"
Identifier "Device1"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 8800 GT"
BusID "PCI:1:0:0"
Screen 1
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "TwinView" "0"
Option "TwinViewXineramaInfoOrder" "CRT-0"
Option "metamodes" "CRT-0: 1280x1024 +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "Screen1"
Device "Device1"
Monitor "Monitor1"
DefaultDepth 24
Option "TwinView" "0"
Option "metamodes" "CRT-1: 1360x768 +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection
[ 12049.854]
X.Org X Server 1.9.0
Release Date: 2010-08-20
[ 12049.855] X Protocol Version 11, Revision 0
[ 12049.855] Build Operating System: Linux 2.6.34-ARCH x86_64
[ 12049.855] Current Operating System: Linux Arch 2.6.35-ARCH #1 SMP PREEMPT Wed Sep 29 08:45:18 CEST 2010 x86_64
[ 12049.855] Kernel command line: root=/dev/disk/by-uuid/132b76f3-06e9-4838-944f-43ac4deccebb ro
[ 12049.855] Build Date: 24 August 2010 01:44:37PM
[ 12049.855]
[ 12049.855] Current version of pixman: 0.18.4
[ 12049.856] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 12049.856] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 12049.856] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Oct 5 17:25:50 2010
[ 12049.857] (==) Using config file: "/etc/X11/xorg.conf"
[ 12049.857] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 12049.857] (==) ServerLayout "Layout0"
[ 12049.857] (**) |-->Screen "Screen0" (0)
[ 12049.857] (**) | |-->Monitor "Monitor0"
[ 12049.857] (**) | |-->Device "Device0"
[ 12049.857] (**) |-->Screen "Screen1" (1)
[ 12049.857] (**) | |-->Monitor "Monitor1"
[ 12049.857] (**) | |-->Device "Device1"
[ 12049.857] (**) |-->Input Device "Keyboard0"
[ 12049.857] (**) |-->Input Device "Mouse0"
[ 12049.857] (**) Option "Xinerama" "1"
[ 12049.857] (==) Automatically adding devices
[ 12049.857] (==) Automatically enabling devices
[ 12049.857] (**) Xinerama: enabled
[ 12049.857] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 12049.857] Entry deleted from font path.
[ 12049.857] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 12049.857] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 12049.857] (WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 12049.857] (WW) Disabling Keyboard0
[ 12049.857] (WW) Disabling Mouse0
[ 12049.857] (II) Loader magic: 0x7d4880
[ 12049.857] (II) Module ABI versions:
[ 12049.857] X.Org ANSI C Emulation: 0.4
[ 12049.857] X.Org Video Driver: 8.0
[ 12049.857] X.Org XInput driver : 11.0
[ 12049.857] X.Org Server Extension : 4.0
[ 12049.858] (--) PCI:*(0:1:0:0) 10de:0611:1462:1170 rev 162, Mem @ 0xfd000000/16777216, 0xd0000000/268435456, 0xfa000000/33554432, I/O @ 0x0000cc00/128, BIOS @ 0x????????/131072
[ 12049.858] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 12049.858] (II) LoadModule: "extmod"
[ 12049.858] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 12049.858] (II) Module extmod: vendor="X.Org Foundation"
[ 12049.858] compiled for 1.9.0, module version = 1.0.0
[ 12049.858] Module class: X.Org Server Extension
[ 12049.858] ABI class: X.Org Server Extension, version 4.0
[ 12049.858] (II) Loading extension MIT-SCREEN-SAVER
[ 12049.858] (II) Loading extension XFree86-VidModeExtension
[ 12049.858] (II) Loading extension XFree86-DGA
[ 12049.858] (II) Loading extension DPMS
[ 12049.858] (II) Loading extension XVideo
[ 12049.858] (II) Loading extension XVideo-MotionCompensation
[ 12049.858] (II) Loading extension X-Resource
[ 12049.858] (II) LoadModule: "dbe"
[ 12049.859] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 12049.859] (II) Module dbe: vendor="X.Org Foundation"
[ 12049.859] compiled for 1.9.0, module version = 1.0.0
[ 12049.859] Module class: X.Org Server Extension
[ 12049.859] ABI class: X.Org Server Extension, version 4.0
[ 12049.859] (II) Loading extension DOUBLE-BUFFER
[ 12049.859] (II) LoadModule: "glx"
[ 12049.859] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 12049.866] (II) Module glx: vendor="NVIDIA Corporation"
[ 12049.867] compiled for 4.0.2, module version = 1.0.0
[ 12049.867] Module class: X.Org Server Extension
[ 12049.867] (II) NVIDIA GLX Module 256.53 Fri Aug 27 20:50:26 PDT 2010
[ 12049.867] (II) Loading extension GLX
[ 12049.867] (II) LoadModule: "record"
[ 12049.867] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 12049.867] (II) Module record: vendor="X.Org Foundation"
[ 12049.867] compiled for 1.9.0, module version = 1.13.0
[ 12049.867] Module class: X.Org Server Extension
[ 12049.867] ABI class: X.Org Server Extension, version 4.0
[ 12049.867] (II) Loading extension RECORD
[ 12049.867] (II) LoadModule: "dri"
[ 12049.867] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 12049.867] (II) Module dri: vendor="X.Org Foundation"
[ 12049.867] compiled for 1.9.0, module version = 1.0.0
[ 12049.867] ABI class: X.Org Server Extension, version 4.0
[ 12049.867] (II) Loading extension XFree86-DRI
[ 12049.867] (II) LoadModule: "dri2"
[ 12049.867] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 12049.867] (II) Module dri2: vendor="X.Org Foundation"
[ 12049.867] compiled for 1.9.0, module version = 1.2.0
[ 12049.867] ABI class: X.Org Server Extension, version 4.0
[ 12049.867] (II) Loading extension DRI2
[ 12049.867] (II) LoadModule: "nvidia"
[ 12049.867] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 12049.868] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 12049.868] compiled for 4.0.2, module version = 1.0.0
[ 12049.868] Module class: X.Org Video Driver
[ 12049.868] (II) NVIDIA dlloader X Driver 256.53 Fri Aug 27 20:29:45 PDT 2010
[ 12049.868] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 12049.868] (--) using VT number 7
[ 12049.869] (II) Loading sub module "fb"
[ 12049.869] (II) LoadModule: "fb"
[ 12049.869] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 12049.870] (II) Module fb: vendor="X.Org Foundation"
[ 12049.870] compiled for 1.9.0, module version = 1.0.0
[ 12049.870] ABI class: X.Org ANSI C Emulation, version 0.4
[ 12049.870] (II) Loading sub module "wfb"
[ 12049.870] (II) LoadModule: "wfb"
[ 12049.870] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 12049.870] (II) Module wfb: vendor="X.Org Foundation"
[ 12049.870] compiled for 1.9.0, module version = 1.0.0
[ 12049.870] ABI class: X.Org ANSI C Emulation, version 0.4
[ 12049.870] (II) Loading sub module "ramdac"
[ 12049.870] (II) LoadModule: "ramdac"
[ 12049.870] (II) Module "ramdac" already built-in
[ 12049.870] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 12049.870] (==) NVIDIA(0): RGB weight 888
[ 12049.870] (==) NVIDIA(0): Default visual is TrueColor
[ 12049.870] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 12049.870] (**) NVIDIA(0): Option "TwinView" "0"
[ 12049.870] (**) NVIDIA(0): Option "MetaModes" "CRT-0: 1280x1024 +0+0"
[ 12049.870] (**) NVIDIA(0): Option "TwinViewXineramaInfoOrder" "CRT-0"
[ 12049.870] (**) NVIDIA(0): Enabling RENDER acceleration
[ 12049.870] (II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
[ 12049.870] (II) NVIDIA(0): enabled.
[ 12049.955] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-1
[ 12049.957] (II) NVIDIA(0): NVIDIA GPU GeForce 8800 GT (G92) at PCI:1:0:0 (GPU-0)
[ 12049.957] (--) NVIDIA(0): Memory: 524288 kBytes
[ 12049.957] (--) NVIDIA(0): VideoBIOS: 62.92.23.00.00
[ 12049.957] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 12049.957] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[ 12049.957] (--) NVIDIA(0): Connected display device(s) on GeForce 8800 GT at PCI:1:0:0:
[ 12049.957] (--) NVIDIA(0): Lite-On e1770NSL/T (CRT-0)
[ 12049.957] (--) NVIDIA(0): CRT-1
[ 12049.957] (--) NVIDIA(0): Lite-On e1770NSL/T (CRT-0): 400.0 MHz maximum pixel clock
[ 12049.957] (--) NVIDIA(0): CRT-1: 400.0 MHz maximum pixel clock
[ 12049.960] (II) NVIDIA(0): Display Device found referenced in MetaMode: CRT-0
[ 12049.967] (II) NVIDIA(0): Assigned Display Device: CRT-0
[ 12049.967] (II) NVIDIA(0): Validated modes:
[ 12049.967] (II) NVIDIA(0): "CRT-0:1280x1024+0+0"
[ 12049.967] (II) NVIDIA(0): Virtual screen size determined to be 1280 x 1024
[ 12049.999] (--) NVIDIA(0): DPI set to (101, 108); computed from "UseEdidDpi" X config
[ 12049.999] (--) NVIDIA(0): option
[ 12049.999] (WW) NVIDIA(0): 32-bit ARGB GLX visuals are not currently supported with the
[ 12049.999] (WW) NVIDIA(0): Xinerama extension.
[ 12049.999] (WW) NVIDIA(0): Disabling 32-bit ARGB GLX visuals.
[ 12049.999] (**) NVIDIA(1): Depth 24, (--) framebuffer bpp 32
[ 12049.999] (==) NVIDIA(1): RGB weight 888
[ 12049.999] (==) NVIDIA(1): Default visual is TrueColor
[ 12049.999] (==) NVIDIA(1): Using gamma correction (1.0, 1.0, 1.0)
[ 12049.999] (**) NVIDIA(1): Option "TwinView" "0"
[ 12049.999] (**) NVIDIA(1): Option "MetaModes" "CRT-1: 1360x768 +0+0"
[ 12049.999] (**) NVIDIA(1): Enabling RENDER acceleration
[ 12049.999] (II) NVIDIA(1): NVIDIA GPU GeForce 8800 GT (G92) at PCI:1:0:0 (GPU-0)
[ 12049.999] (--) NVIDIA(1): Memory: 524288 kBytes
[ 12049.999] (--) NVIDIA(1): VideoBIOS: 62.92.23.00.00
[ 12049.999] (II) NVIDIA(1): Detected PCI Express Link width: 16X
[ 12049.999] (--) NVIDIA(1): Interlaced video modes are supported on this GPU
[ 12049.999] (--) NVIDIA(1): Connected display device(s) on GeForce 8800 GT at PCI:1:0:0:
[ 12049.999] (--) NVIDIA(1): Lite-On e1770NSL/T (CRT-0)
[ 12049.999] (--) NVIDIA(1): CRT-1
[ 12049.999] (--) NVIDIA(1): Lite-On e1770NSL/T (CRT-0): 400.0 MHz maximum pixel clock
[ 12049.999] (--) NVIDIA(1): CRT-1: 400.0 MHz maximum pixel clock
[ 12050.002] (II) NVIDIA(1): Display Device found referenced in MetaMode: CRT-1
[ 12050.006] (II) NVIDIA(1): Assigned Display Device: CRT-1
[ 12050.006] (WW) NVIDIA(1): No valid modes for "CRT-1:1360x768+0+0"; removing.
[ 12050.006] (WW) NVIDIA(1):
[ 12050.006] (WW) NVIDIA(1): Unable to validate any modes; falling back to the default mode
[ 12050.006] (WW) NVIDIA(1): "nvidia-auto-select".
[ 12050.006] (WW) NVIDIA(1):
[ 12050.006] (II) NVIDIA(1): Validated modes:
[ 12050.006] (II) NVIDIA(1): "nvidia-auto-select"
[ 12050.006] (II) NVIDIA(1): Virtual screen size determined to be 1024 x 768
[ 12050.009] (WW) NVIDIA(1): Unable to get display device CRT-1's EDID; cannot compute DPI
[ 12050.009] (WW) NVIDIA(1): from CRT-1's EDID.
[ 12050.009] (==) NVIDIA(1): DPI set to (75, 75); computed from built-in default
[ 12050.009] (WW) NVIDIA(1): 32-bit ARGB GLX visuals are not currently supported with the
[ 12050.009] (WW) NVIDIA(1): Xinerama extension.
[ 12050.009] (WW) NVIDIA(1): Disabling 32-bit ARGB GLX visuals.
[ 12050.009] (--) Depth 24 pixmap format is 32 bpp
[ 12050.009] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
[ 12050.010] (II) NVIDIA(0): Initialized GPU GART.
[ 12050.014] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 12050.014] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 12050.014] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 12050.014] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 12050.014] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 12050.014] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 12050.014] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 12050.014] (II) NVIDIA(0): Config Options in the README.
[ 12050.017] (II) NVIDIA(0): Setting mode "CRT-0:1280x1024+0+0"
[ 12050.049] (II) Loading extension NV-GLX
[ 12050.064] (II) NVIDIA(0): Initialized OpenGL Acceleration
[ 12050.071] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 12050.071] (II) NVIDIA(0): Initialized X Rendering Acceleration
[ 12050.071] (==) NVIDIA(0): Backing store disabled
[ 12050.071] (==) NVIDIA(0): Silken mouse enabled
[ 12050.085] (**) NVIDIA(0): DPMS enabled
[ 12050.085] (II) Loading extension NV-CONTROL
[ 12050.085] (II) Loading sub module "dri2"
[ 12050.085] (II) LoadModule: "dri2"
[ 12050.085] (II) Reloading /usr/lib/xorg/modules/extensions/libdri2.so
[ 12050.085] (II) NVIDIA(0): [DRI2] Setup complete
[ 12050.085] (==) RandR enabled
[ 12050.086] (II) NVIDIA(1): Initialized GPU GART.
[ 12050.090] (II) NVIDIA(1): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 12050.090] (II) NVIDIA(1): may not be running or the "AcpidSocketPath" X
[ 12050.090] (II) NVIDIA(1): configuration option may not be set correctly. When the
[ 12050.090] (II) NVIDIA(1): ACPI event daemon is available, the NVIDIA X driver will
[ 12050.090] (II) NVIDIA(1): try to use it to receive ACPI event notifications. For
[ 12050.090] (II) NVIDIA(1): details, please see the "ConnectToAcpid" and
[ 12050.090] (II) NVIDIA(1): "AcpidSocketPath" X configuration options in Appendix B: X
[ 12050.090] (II) NVIDIA(1): Config Options in the README.
[ 12050.090] (II) NVIDIA(1): Setting mode "nvidia-auto-select"
[ 12050.145] (II) NVIDIA(1): Initialized OpenGL Acceleration
[ 12050.149] (==) NVIDIA(1): Disabling shared memory pixmaps
[ 12050.149] (II) NVIDIA(1): Initialized X Rendering Acceleration
[ 12050.149] (==) NVIDIA(1): Backing store disabled
[ 12050.149] (==) NVIDIA(1): Silken mouse enabled
[ 12050.157] (==) NVIDIA(1): DPMS enabled
[ 12050.158] (II) Loading sub module "dri2"
[ 12050.158] (II) LoadModule: "dri2"
[ 12050.158] (II) Reloading /usr/lib/xorg/modules/extensions/libdri2.so
[ 12050.158] (II) NVIDIA(1): [DRI2] Setup complete
[ 12050.158] (==) RandR enabled
[ 12050.158] (II) Initializing built-in extension Generic Event Extension
[ 12050.158] (II) Initializing built-in extension SHAPE
[ 12050.158] (II) Initializing built-in extension MIT-SHM
[ 12050.158] (II) Initializing built-in extension XInputExtension
[ 12050.158] (II) Initializing built-in extension XTEST
[ 12050.158] (II) Initializing built-in extension BIG-REQUESTS
[ 12050.158] (II) Initializing built-in extension SYNC
[ 12050.158] (II) Initializing built-in extension XKEYBOARD
[ 12050.158] (II) Initializing built-in extension XC-MISC
[ 12050.158] (II) Initializing built-in extension SECURITY
[ 12050.158] (II) Initializing built-in extension XINERAMA
[ 12050.158] (II) Initializing built-in extension XFIXES
[ 12050.158] (II) Initializing built-in extension RENDER
[ 12050.158] (II) Initializing built-in extension RANDR
[ 12050.158] (II) Initializing built-in extension COMPOSITE
[ 12050.158] (II) Initializing built-in extension DAMAGE
[ 12050.160] (II) Initializing extension GLX
[ 12050.367] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 12050.367] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 12050.367] (II) LoadModule: "evdev"
[ 12050.367] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 12050.367] (II) Module evdev: vendor="X.Org Foundation"
[ 12050.367] compiled for 1.9.0, module version = 2.5.0
[ 12050.367] Module class: X.Org XInput Driver
[ 12050.367] ABI class: X.Org XInput driver, version 11.0
[ 12050.367] (**) Power Button: always reports core events
[ 12050.367] (**) Power Button: Device: "/dev/input/event3"
[ 12050.375] (--) Power Button: Found keys
[ 12050.375] (II) Power Button: Configuring as keyboard
[ 12050.376] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 12050.376] (**) Option "xkb_rules" "evdev"
[ 12050.376] (**) Option "xkb_model" "evdev"
[ 12050.376] (**) Option "xkb_layout" "us"
[ 12050.399] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 12050.399] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 12050.399] (**) Power Button: always reports core events
[ 12050.399] (**) Power Button: Device: "/dev/input/event2"
[ 12050.415] (--) Power Button: Found keys
[ 12050.415] (II) Power Button: Configuring as keyboard
[ 12050.415] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 12050.415] (**) Option "xkb_rules" "evdev"
[ 12050.415] (**) Option "xkb_model" "evdev"
[ 12050.415] (**) Option "xkb_layout" "us"
[ 12050.416] (II) config/udev: Adding input device UVC Camera (046d:0802) (/dev/input/event4)
[ 12050.416] (**) UVC Camera (046d:0802): Applying InputClass "evdev keyboard catchall"
[ 12050.416] (**) UVC Camera (046d:0802): always reports core events
[ 12050.416] (**) UVC Camera (046d:0802): Device: "/dev/input/event4"
[ 12050.428] (--) UVC Camera (046d:0802): Found keys
[ 12050.428] (II) UVC Camera (046d:0802): Configuring as keyboard
[ 12050.428] (II) XINPUT: Adding extended input device "UVC Camera (046d:0802)" (type: KEYBOARD)
[ 12050.428] (**) Option "xkb_rules" "evdev"
[ 12050.428] (**) Option "xkb_model" "evdev"
[ 12050.428] (**) Option "xkb_layout" "us"
[ 12050.430] (II) config/udev: Adding input device Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) (/dev/input/event5)
[ 12050.431] (**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Applying InputClass "evdev pointer catchall"
[ 12050.431] (**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): always reports core events
[ 12050.431] (**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Device: "/dev/input/event5"
[ 12050.442] (--) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Found 3 mouse buttons
[ 12050.442] (--) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Found scroll wheel(s)
[ 12050.442] (--) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Found relative axes
[ 12050.442] (--) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Found x and y relative axes
[ 12050.442] (II) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Configuring as mouse
[ 12050.442] (**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): YAxisMapping: buttons 4 and 5
[ 12050.442] (**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 12050.442] (II) XINPUT: Adding extended input device "Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)" (type: MOUSE)
[ 12050.442] (**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): (accel) keeping acceleration scheme 1
[ 12050.442] (**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): (accel) acceleration profile 0
[ 12050.442] (**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): (accel) acceleration factor: 2.000
[ 12050.442] (**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): (accel) acceleration threshold: 4
[ 12050.442] (II) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): initialized for relative axes.
[ 12050.442] (II) config/udev: Adding input device Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) (/dev/input/mouse0)
[ 12050.442] (II) No input driver/identifier specified (ignoring)
[ 12050.444] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 12050.444] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 12050.444] (**) AT Translated Set 2 keyboard: always reports core events
[ 12050.444] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 12050.458] (--) AT Translated Set 2 keyboard: Found keys
[ 12050.458] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[ 12050.458] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[ 12050.458] (**) Option "xkb_rules" "evdev"
[ 12050.458] (**) Option "xkb_model" "evdev"
[ 12050.458] (**) Option "xkb_layout" "us"
[ 12050.459] (II) config/udev: Adding input device PC Speaker (/dev/input/event1)
[ 12050.459] (II) No input driver/identifier specified (ignoring)
[ 12057.008]
Backtrace:
[ 12057.008] 0: X (xorg_backtrace+0x28) [0x49f558]
[ 12057.008] 1: X (0x400000+0x67939) [0x467939]
[ 12057.008] 2: /lib/libpthread.so.0 (0x7f6c851f4000+0xf1c0) [0x7f6c852031c0]
[ 12057.008] 3: X (0x400000+0x130355) [0x530355]
[ 12057.008] 4: X (0x400000+0x2a2e1) [0x42a2e1]
[ 12057.008] 5: X (0x400000+0x2123e) [0x42123e]
[ 12057.008] 6: /lib/libc.so.6 (__libc_start_main+0xfd) [0x7f6c84187c4d]
[ 12057.008] 7: X (0x400000+0x20de9) [0x420de9]
[ 12057.008] Segmentation fault at address 0x4
[ 12057.008]
Fatal server error:
[ 12057.008] Caught signal 11 (Segmentation fault). Server aborting
[ 12057.008]
[ 12057.008]
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 12057.008] Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 12057.008]
[ 12057.019] (II) Power Button: Close
[ 12057.019] (II) UnloadModule: "evdev"
[ 12057.032] (II) Power Button: Close
[ 12057.032] (II) UnloadModule: "evdev"
[ 12057.045] (II) UVC Camera (046d:0802): Close
[ 12057.045] (II) UnloadModule: "evdev"
[ 12057.069] (II) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Close
[ 12057.069] (II) UnloadModule: "evdev"
[ 12057.082] (II) AT Translated Set 2 keyboard: Close
[ 12057.082] (II) UnloadModule: "evdev"
Last edited by Azriel (2010-10-06 15:09:27)

Sorry this doesn't really help with the Xinerama problem, but since you are using the nvidia driver, have you considered using Twinview instead? You could do composite stuff too with Twinview - last I knew, Xinerama had problems with things that want to use compositing. I don't know how your setup is but if you're not set on using Xinerama, it might be an option to consider.

Problems with USB device when using WindowsNT

Hi,
my problem is that I want to use a simulator which can only be connected with USB to the computer.
I used the VISA Driver Development Wizard as discribed in this link (http://zone.ni.com/devzone/conceptd.nsf/webmain/6792BAB18242082786256DD7006B6416) and it didn't work.
I'm using Windows NT and VISA 3.1 and I read that it isn't possible to create a USB connection with VISA when using Windows NT. So my questions
1) is this right
2) Has someone a idea what I can do? I tried to use VISA USB Control and this also didn't work.
I hope I discribed my problem detailed enough. It's my first post.
Thanks for your responses
Joerg

As you can see in this table, USB is not supported by VISA under NT:
http://digital.ni.com/public.nsf/websearch/EE34F21ECC2BE01286256C52005D1A1F?OpenDocument
I would recommend to use Win2000 or XP. Using one of these OSes you could use this turorial to create your VISA-driver:
http://zone.ni.com/devzone/devzoneweb.nsf/Opendoc?openagent&1D0DD81FF1448CAE86256D90006EE2B4
If it is not posssible to change the OS, you have to look for other ways of programming your usb-device. Check the web or the Microsoft site for help concerning Windows SDK and USB.
Hope this helps a little!

ITS URL with two slashes when using namespace

Similar Messages

Maybe you are looking for