Its xperia z all over again!

Yesterday in the afternoon i found out that my 2 and a half months old xperia z3's front panel has raised slightly!!!! I had found the same kind of problem in my xperia z! Which was my previous phone!! I thought that after 2 fricking years they should have got rid of the problem! What should I do!!!!??? I want it to be replaced! Or repaired! The panel is raised in the top right corner in the front.

You need to either return your device to the place of purchase or contact Xperia care http://www.sonymobile.com/global-en/support/contact-us/
For a successful technology, reality must take precedence over public relations, for Nature cannot be fooled. Richard P. Feynman

Similar Messages

HELP... From "Its the same all over again"...PE won't recognize my DVD Burner

Hi Guys,
I am sitting with my computer repair guy. We have beaten my Dell Precision 340 desktop to death in an attempt to try to understand why its not recognizing its DVD burner. It started with the old Sony burner I had prior, but since it was old and very slow I took this opportunity to upgrade to a new higher speed Samsung DVD burner.
So we removed the old, put in the new did anti virus tests, tried the Microsoft patch found here, and so far nothing. Its as simple as in PE the little cautionary yellow triangle comes up and says "DVD burner not detected" and the "rescan" button is greyed out and not an option I have.
Its as complex as in when we try to burn ANYTHING through the desktop drag and drop its then shows as a CD drive once the blank disc is inserted, and not a burner, of any type!!
It will however burn a disc through NERO, but I have to save the project and then burn it from it stored location on the hard drive.
This of course eliminates many of the assets of the program that I desire.
I need any and all help you can give. Computer guy and I are at a total loss.
Thanks in advance,
~Emily

Thanks for the quick replies!!!
Sadly we have read all you mentioned and for the last week NERO hasn't been installed and all components were removed and double and triple checked that they were'nt within a country mile of the computer.
We just know from testing that Nero will allow it to burn.
We did try everything you have already linked.
We did try the registry fix listed her: http://www.tomshardware.com/forum/171067-32-drive-drive-detected
Nothing.
This is going above our collective heads and we're starting to dream up ways to a.) fix it and b.) destroy it all in a magnificent display of pyrotechnics!!!
HELP!!
~Emily

HT203167 I had 25 tv shows in my itunes library, and 3 movies. Now there all gone, I can access them thru the store but I dont want to download all over again. There was like 50 gb of video. What do I do, Its impossable to contanct apple about it.

I had almost 30 different seasons of tv shows in my library, alot. Now there all gone, my library is blank. My purchases are in my purchasd section on the store but I dont have enough space to download them all over again. I cant figure out what happend to them. I just watched one, then turnd my pc off, and later that day they were gone. And its IMPOSSABLE to contact apple about it, I dont know why its so hard to ask them any kind of question... Please help..

Welcome to the Apple Community.
The Apple TV 2 will play all the content in your iTunes library that your Apple TV 1 does. It can no longer sync any of it but can stream it all just as the older model did. Airplay is a different feature that lets you stream from an iPad/iPhone, the Apple TV 2 has Airplay the first didn't.
You can still sort and search content by genre, it still marks content watched and unwatched and mainly still lets you organise much as the Apple TV 1 did, with one exception. It doesn't do nested folders, so the ability to tag a movie as a show (ie James Bond) and have all the associated movies in a James bond folder has gone and it lists all these movies individually.
It has a similar situation with TV shows. It will put all TV shows in a series in a folder as the older one did, but the new one lists each series separately whereas the older model would put all the series in one folder.
Not nesting folders is a bit of a pain with large libraries and whilst I don't like it, it's more or less the only compromise I have to make and of course I get additional features too.

How do I get a clean start for catalog to start all over again?

Running PSE5 on Win XP w/SP3
I have not been able to get any information about how to recover a catalog from files that have been copied as a backup, so it looks like I'm forced to start all over again. There are about 17000 images in the C: drive. The images all seem to be OK. A few days ago there was a properly operating catalog file (and all the others) there, too.
Since then, I have tried to learn how to make the former catalog file operative, but no luck. Since then, I have read that just uninstalling and reinstalling PSE5 will do nothing to give me a clean start - that is, all the old (now problematical) catalog file trouble will still be there.
To start all over again seems like such a waste of time, since I have copies of all the catalog files as they were properly operating in March, but it seems that something important is missing and none of this stuff is useful in any way. I'm not the PSE5 user, so I didn't know about the external catalog backup that can be done from within PSE5 - so the possibility to use that technique does not exist. All I have is a straight copy of everything in the Documents and Settings.. ...Application Data\Adobe folder. I've tried replacing the whole Adobe folder with the backup files, starting PSE5 and looking at the catalog, but that didn't work either. I just get the same old empty catalog.
So, the 'start all over' option seems like the only way out. Anyone who has lost the catalog knows how much work is in the catalog, so any help with either making the old catalog file work through reconstruction somehow, or starting all over again, will be very helpful. Someday, I'd like to learn how this happened. Until then I'll be backing up the catalog file from within PSE5 to an external location... Everytime there's a new entry in the catalog information. That method seems simple enough that even I could do it.
Thanks,
Al
(K3PXR)

I tried to open the resident 'My Catalog.psa' file. PSE5 dutifully did that and the catalog information, such as tags and other information that would normally be present when looking at the Organizer is blank, as if nothing has ever been entered in the catalog.
The 'My Catalog.psa' file is about 600K (according to windows explorer) and resides in the 'Catalogs' folder. Also there are:
My Catalog-2.psa about 3252K
My Catalog-2.psa about 5380K
In the folder: 'Catalog Folders' were the folders:
My Catalog
My Catalog-1
In the folder My Catalog are the files:
backupCt.dat 1K
collstatus.dat 1K
tagstatus.dat 1K
thumb.5.cache 10K
In the folder My Catalog-1 is the file:
tn.4.cache 32394 K
Above I say 'In the folder, Catalog Folders, were the folders My Catalog and My Catalog-1' because last night when shutting down, I didn't know what was in those folders. I was too tired to check.
I did copy everything that was in the Adobe folder and all associated sub folders, including the folders above, to an SD flash card before I started to do anything else. Becasue of this, I should be able to get back to the way it was before I started to do anything, then I opened the catalog file My Catalog-1.psa. It said that it was made from an earlier version, asked to convert it and contained the 2002 to 2004 catalog information. To the best of my knowledge, those photos were never entered in PSE5, and probably were from an earlier version of PS Album.
So, where is the information that was once in the PSE5 catalog? Which files should contain that information? Why can't the files simply be copied from the backup copies back on to the C:\ drive in the proper folders and then upon starting PSE5 see at least the catalog that was present when the copies of the files in the folders above were made? What dumb mistakes could have been made to overwrite the information in the catalog and make the catalog appear empty? If I don't learn this, I'll not be able to prevent it from happening again.
I'm not on the machine with the trouble at the moment, and since it is not my machine, I sometimes have trouble getting to it during normal waking hours. I don't know the exact clicks and keystrokes that got the catalog from its normal function to appearing and functioning as if it is empty..
What exactly are the symptoms of "PSE5 doesn't like..."? The catalog appears and functions as if it is empty - as if nothing ever has been or ever was entered into it. PSE5 Organizer is operating normally as far as I can tell. I cannot seem to locate the former catalog information and it has not loaded the former catalog file information. A new test catalog was made and it opens and shows the thumbnails of its four images. I hope that the test catalog I made didn't overwrite anything that would prevent going back to the original catalog information. The copies of the files can be restored as they were a few months ago, though, because there is a copy of them on an SD card.
Thanks,
Al
(K3PXR)

How do I start my setup process all over again?

How do i start my setup process all over again? I didn't complete it and I don't think its registered. My PC's iTunes does not see it.

Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
Try another cable
Try on another computer
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Ipod Starts up, stops, resets, and does it all over again...

Hey all,
I tried searching but couldn't find anything like what I have. I recently purchased a new laptop, swapped my old library onto the new laptop, and then went to 'sync' on the new laptop. Things seemed to be working fine, unplugged the ipod, let it sit for a few hours...went to turn it on and it froze up. Reset it, but now, it loads up, shows the apple symbol (you can hear the HD winding up) gets about 4-5 seconds into it, clicks off, then starts it all over again.
I've been unable to get it to do anything...it won't reset, connecting it to a power source doesn't do anything, and of course, it does this for as long as it can then the battery burns its self out.
Does this sound fixable without bringing it in?
Thanks guys,
Jared

This exact same thing happened to me, and I have a solution. What I did, is I just let it sit out, and do its thing (restarting a bunch) then it eventually went to the main menu. I plugged it into my computer, and did a restore.
Now if that doesn't work for you, you may need to force mount it. Plug the iPod into your computer, and hold down the middle and play/pause button. Hopefully it should stop its nonsense and show up in your computer and let you do a restore in iTunes.
Oh, and welcome to Apple Discussions!

When I play my Ipod shuffle 3rd gen there's a moment when I start hearing interference until it stops playing, when I turn it off and on again it starts playing from the first song all over again, and once it sounded like the music was slowing down.

My Ipod shuffle 3rd gen starts playing songs with some kind of interference until it stops playing, when I turn it off and on again it starts playing from the first song all over again, and once it sounded like the music was slowing down. First I thought it was the earphones, but I exchanged them for newer ones and so far its the same

You may want to do a Restore on the shuffle in iTunes. The Restore button is on the shuffle's Summary screen in iTunes. This will erase the shuffle, re-install its software, and set it to default settings. If it's a software or data corruption glitch, the Restore should fix it. After the Restore, reload or resync your songs, and try it again. As a test, you may want to initially select a small number of songs to put back on the shuffle.

Every time I restart the opensso have to set up all over again!!

every time I restart the opensso have to set up all over again,
I haved the download Opensso and every time that i shutdown the server, i have to set up ALL again...
where can I find the Docs how to set up It correctly????
Thanks in advanced!!!!

Hi,
Have you deployed on JBoss? If so, ensure you've done an exploded deployment - see JBoss section of the release notes at http://download.java.net/general/opensso/stable/openssov1-build4/B4-ReleaseNotes.html
Deploying the WAR directly onto JBoss expands it into a temporary directory and it loses its configuration when the server is shutdown.
Cheers,
Pat

I want to upgrade, not install intunes all over again!

Heres the thing, me, i'm perfectly happy with an outdated version of itunes, it doesn't bother me in the slightest, however all my movies and TV shows have disippeared from my 30g ipod video and i'm assuming the outdated version is why. I clicked to find updates and i'm brought to a page asking me to install itunes all over again, not just update. Help?
Windows XP

As with most programs, when you update them, the "Old" version has to be removed in order for the new program with its new files to be installed.
When you download the "New" version of iTunes and start installing it, It will detect the "Old" version you have, automaticly remove it and place the new updates to your PC.
When the old version is removed you will not loose any playlist, Music, Ratings ect ect. You can remove iTunes, then reinstall it urself and still not loose any music or have it deleted.

How deploy a new MI appl. version without transfer data all over again

Hello,
I'm using MI 7.0 SP15 and I have already deployed the enhanced MSR application on all PDA devices.
Then, I changed MSR (modifying just some JSP file) creating a new version of it, and now I need to deploy it on all devices but I want to avoid to transfer all data again (the database we're using on PDAs is DB2e) because it's too expensive to transfer them.
I usually assign a new version, through NW administrator, as JSP Application after having deassigned the old one to all users (in NW administrator I deassign the old version to all users, then I undeploy it, then I deploy the new version and then I reassign it to all users) but in this way I see that all local tables (related the the SyncBOs used by MSR) with all their data are deleted and created again.
Does exist a way to deploy a new application version avoiding to transfer data all over again in the local DB tables?
Thanks,
Maria

Hi Larissa,
Thanks for your prompt reply.
I just tried to deploy the new MSR.war file as add-on unsuccessfully.
My OLD MSR application had the following MCD:
Vendor: xxx
Application type: APPLICATION
Name: MSR
Description: Mobile Sales
Version: 20.03
Build Number: 00
Runtime: JSP
Operating System:
Processor:
Language:
Link to SAP MI Homepage: x
Then I tried to deploy the NEW MSR version as add-on with the following MCD:
Vendor: xxx
Application type: ADDON
Name: MSR
Description: Mobile Sales
Version: 20.03
Build Number: 00
Runtime:
Operating System:
Processor:
Language:
Link to SAP MI Homepage:
The new MSR.sda has been created successfully and its deployment status is valid but the deployment on server fails with the following error message:
Reason: <Localization failed: ResourceBundle='com.sap.engine.services.deploy.DeployResourceBundle', ID='<Localization failed: ResourceBundle='com.sap.engine.services.deploy.DeployResourceBundle', ID='A configuration with the path "mobile/ADDON/xxx_MSR_20.03" does not exist.', Arguments: []--> : Can't find resource for bundle java.util.PropertyResourceBundle, key A configuration with the path "mobile/ADDON/xxx_MSR_20.03" does not exist.'
(message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performAction(DeploymentActionTypes).REMEXC)
What Am I doing wrong?
Many Thanks,
Maria

My iPod Touch is running on ios 7. In the last two and a half months all the apps of my iPod have been wiped out twice. I had to download all the apps all over again. Why is this happening?

My iPod Touch is running on ios 7. In the last two and a half all the apps of my iPod have been suddenly wiped out twice. I had to download all the apps all over again. Why has it happened?

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

I have a current iPhone 5 with all my apps and games at certain levels, how do I use iCloud to transfer current game levels as only a few games have transferred and other games want me to start all over again on my new iPad?

I currently have an iPhone 5 that I play games on regularly and I have just bought the iPad 4 and I want to transfer all my game progress from the iPhone to the iPad. I have turned on iCloud on both devices and backed up and while all my games transfer only some of the games maintain progress where others want me to start all over again. I pretty sure I doing something wrong... Can some help or give me idiot proof guidance on how do do this successfully. I'm generally pretty tech savvy but this has me stumped and iCloud is ment to be easy to use.

I would not be able to give you idiot proof guide, since different games are different. Some of them have icloud integrated already, but those already taken care of. Some of them use specific logins and once you log - you get your info. General recommendation is to contact support sites of those games for enabling icloud instructions or enabling of transfer. There are other purely apple ways - like sync your phone in itunes and then sync apps with ipad, but those are only one time transfer. There is another way that is not typically recommended - restoring ipad from iphone backup. It may transfer your game content, but once again sync in the future has to be done by game.
So if I were you, I would address that individually with every game provider.

HT1977 My Computer crashed so I have had to download iTunes all over again. The problem is now I can't sync my Apps to my iTunes. It doesn't let me arrange them or anything when plugging my iPad in. The screen is greylike and won't let me select anything

Hi Guys,
My computer crashed and I lost everything. I got a new one and downloaded itunes all over again. When I plug my ipad in even after authorising my computer it will still not let me edit anything on the ipad. The screen is grey like on the ipad section and i cant select an app or anything. I have transfered purchase apps but all it does is take movies and tv shows accross. It wont transfer the apps into itunes. Please help

As far as I know, iTunes will still not change anything until you click on Apply in the lower right corner. I fiddle with my settings all the time - just so I can get a sense if what to expect should I make any changes - and I have never seen anything happen to my configuration unless I click on Apply in the lower right corner of iTunes. Not only that - you have turned off auto sync so as far as I know you still have to click on sync or apply in order for the iPad to sync with iTunes.
That doesn't mean it will not happen, I've never seen it happen - is all that I'm saying. I'm sorry but I'm not sure what will happen, but the only reason that I can of why the apps will not transfer is because of the manual manage setting. I could be wrong about that as well.
Look at this discussion - which I have referred quite a few users to read. I know this process has worked for a number of people that have read it and used the instructions in it. Maybe we are missing something - what that would be - I'm not quite sure, but take a look.
https://discussions.apple.com/thread/3305461

When I only want to close the current window to return to the previous window, the whole firefox site closes down, I end up back at my desktop & have to start all over again. How can this be fixed?

If I close a window I should be back at the previous window that I was at when I followed a link to this window. At least that's the way Internet Explorer works, which I have used for years. The only thing that prevents me from using Firefox exclusively is that it is very time consuming to have to start all over again from scratch every time I close a window. For instance, say I type "cats" into the search box. It gives me links to a list of "cats" sites. I go to a "cats" website, decide I don't like it so close the window to return to my list of sites, but instead of returning me to the list, I end up at my desktop. Then I have to start all over, just like I had not even been online. Very aggravating. I don't know how else to describe the problem, I can't believe that other people haven't had a similar complaint, unless I just have some settings wrong?

Now up to Firefox 8 and the problem persists. Cannot go to the www.turnitin.com page and login as I used to do -- Firefox does not remember my username or password.
Still works on Windows, and with other browsers... It would be great if a fix is available.

After I download Itunes, when trying to sync Ipod, message says "needs newer version of mobile support, uninstall Itunes, and reinstall Itunes, and the same process starts all over again. why is that?

after I download Itunes, when trying to sync Ipod, message says "needs newer version of mobile support, uninstall Itunes, and reinstall Itunes, and the same process starts all over again. why is that?

Try removing and then reinstalling the Apple software using these instructions.
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
The above containes a link for XP. Also. make sure you install the correct Apple software, It comes in 32 and 64 bit and you need the one that is the same as the computer OS

Its xperia z all over again!

Similar Messages

Maybe you are looking for