ITServer - Internet Service created by us not working in SAP ECC

Hai all,
We have SAP R/3 4.6C and a ITS server 6.1. We created some Internet service and published in our ITS server.
We have ugpraded our system to SAP ERP Central Component 5.0, which has inbuilt ITS server. I published the standard SAP internet service "BWSP" and our own internet services. The problem is standard SAP Internet Service is working whereas the the internet service which we developed is not running.
Before publishing i did the following settings, Utilities => Settings => Internet Transaction Server, in the "Test Service" tab i have selected "Default Web Server" radio button and on "Publish" tab i have selected "On All Defined Sites".
I published the service by selecting Publish =>Complete Service by right clicking on the service name.
When i execute the service using ITS url i am getting the following error
Service cannot be reached
What has happened?
URL http://devnw2.xy.gov.sg:8000/sap/bc/gui/sap/its/ZGEESIS001/! call was terminated because the corresponding service is not available
Please let me know what's wrong and what is the solution to correct it.
Regards,
Basha.

Hai Raja,
I tried adding in the entry as below.
The below value i just copied from the service BWSP and put it here and changed the transaction code.
~TRANSACTION     zgeestc017
~THEME     99
~COOKIES     1
~DESIGNS     sap_streamline
~RUNTIMEMODE     pm
~DISCONNECTONCLOSE     0
~FLICKERFREE     0
~URLIMAGE     /sap/public/bc/its/graphics
~URLMIME     /sap/public/bc/its/mimes
~URLARCHIVE     /scripts/sapawl.dll
~GENERATEDYNPRO     1
The below is the full error which i got when i tried to run the service after doing the above change.
What has happened?
URL http://devnw2.abc.gov.sg:8000/sap/bc/gui/sap/its/ZGEESIS001/! call was terminated because the corresponding service is not available.
Note
The termination occurred in system D00 with error code 404 and for the reason Not found.
The selected virtual host was 0 .
What can I do?
Please select a valid URL.
If you do not yet have a user ID, contact your system administrator.
ErrorCode:ICF-NF-http-c:000-u:SAPSYS-l:E-i:devnw2_D00_00-v:0-s:404-r:Notfound
HTTP 404 - Not found
Your SAP Internet Communication Framework Team
Regards,
Basha.

Similar Messages

CJ20N is not working in SAP ECC 6.0

Hello Everybody.
In my SAP ECC 6.0 I log in SPANISH and launch tcode: CJ2ON - Project Builder and it transaction code does not work my session hangs and the message in the status bar is:
STARTING APLICATION PROJECT BUILDER (English)
Inicio Aplicación Project Builder (Spanish)
For my Customer is a must to use this tcode in Spanish. In English this transacction works fine.
Here the level components:
SAP_BASIS | 700 | 0006 | SAPKB70006 | SAP Basis Component |
SAP_ABA
700
0006
SAPKA70006
Cross-Application Component
PI_BASIS
2005_1_700
0007
SAPKIPYJ77
PI_BASIS 2005_1_700
ST-PI
2005_1_700
0002
SAPKITLQI2
SAP Solution Tools Plug-In
SAP_BW
700
0006
SAPKW70006
SAP NetWeaver BI 7.0
SAP_AP
700
0003
SAPKNA7003
SAP Application Platform
SAP_HR
600
0003
SAPKE60003
Human Resources
SAP_APPL
600
0003
SAPKH60003
Logistics and Accounting
EA-IPPE
400
0003
SAPKGPID03
SAP iPPE
EA-APPL
600
0003
SAPKGPAD03
SAP R/3 Enterprise Add-On PLM, SCM, Financials
EA-DFPS
600
0003
SAPKGPDD03
SAP R/3 Enterprise Defense Forces & Public Securit
EA-HR
600
0003
SAPKGPHD03
SAP R/3 Enterprise Add-On HR
EA-FINSERV
600
0003
SAPKGPFD03
SAP R/3 Enterprise Financial Services
FINBASIS
600
0003
SAPK-60003INFINBASIS
Fin. Basis
EA-PS
600
0003
SAPKGPPD03
SAP R/3 Enterprise Public Services
EA-RETAIL
600
0003
SAPKGPRD03
SAP R/3 Enterprise Retail
EA-GLTRADE
600
0003
SAPKGPGD03
SAP R/3 Enterprise Global Trade
ECC-DIMP
600
0001
SAPK-60001INECCDIMP
DIMP
ERECRUIT
600
0003
SAPK-60003INERECRUIT
E-Recruiting
FI-CA
600
0003
SAPK-60003INFICA
FI-CA
FI-CAX
600
0003
SAPK-60003INFICAX
FI-CA Extended
INSURANCE
600
0003
SAPK-60003ININSURANC
SAP Insurance
IS-CWM
600
0003
SAPK-60003INISCWM
Industry Solution Catch Weight Management
IS-H
600
0003
SAPK-60003INISH
SAP Healthcare
IS-M
600
0003
SAPK-60003INISM
SAP MEDIA
IS-OIL
600
0003
SAPK-60003INISOIL
IS-OIL
IS-PS-CA
600
0003
SAPK-60003INISPSCA
IS-PUBLIC SECTOR CONTRACT ACCOUNTING
IS-UT
600
0003
SAPK-60003INISUT
SAP Utilities/Telecommunication
SEM-BW
600
0003
SAPKGS6003
SEM-BW: Strategic Enterprise Management
LSOFE
600
0003
SAPK-60003INLSOFE
SAP Learning Solution Front-End
| ST-A/PI | 01H_ECC600 | 0000 | - | Application Servicetools for ECC 600
Have you experienced this issue, can you please give your ideas to solve it ?

Hello,
SWUF is workflow runtime system administration? Seems it disappeared in 4.6 or 4.7.
Try SWDC_RUNTIME and SWDC_DEFINITION - not sure if they are in ECC6.
Let us know if this is the solution.
regards
Rick Bakker
Hanabi Technology

SAP PI FTP sender adapter not working with SAP ECC over Itanium

Hi,
We have been running normally SAP PI 7.0 SP14 with no issue for a while.
We are now in the process of migrate the SAP ECC system from PA risc to IA platform. We are performing some tests between SAP PI and SAP ECC to check that the platform migration is not affecting us in any way and we have found that FTP adapter sender is not working anymore (receiver is working as usual).
We place some files in the new ECC system and when PI goes to retreive the files it is like it can not read anything. It gives no error but it does not pick any file. This is not happening with the old platform.
Does anyone have any idea?
Thanks a lot for your help
Diana

Hi,
I am using FTP connection and for the receiver it is working fine.
Thanks
Diana

HT4995 My location service on Google does not work and nothing is getting saved in my history bookmark

My location service on Google does not work. It will not bring up my location. Also nothing is getting saved in my history folder in my bookmark.

I have the same issue, I think. If I open Safari and search Walmart (google is my default search) it doesn't give me location results, and there is a little button at the top that says 'Use Precise Location.' If I tap that button nothing happens. Very frustrating. I've checked all my settings against my wife's iPhone, and my iPad, both of which work, and I can't find anything different.

Content enrichment service for SP 2013 not working

Content enrichment service for SP 2013 not working
Not able to debug content enrichment service.. Can you please specify the steps for debugging the content enrichment service
Any help will be greatly appreciated.
Regards
BKPA
BKPA

Hi ,
Please see the following articles, run and debug service with breakpoints using F5 from VS, then register the custom content enrichment service with DebugMode and long Timeout to SharePoint, then start a full crawl to call the web service.
http://www.dotnetmafia.com/blogs/dotnettipoftheday/archive/2014/04/08/how-to-use-the-sharepoint-2013-content-enrichment-web-service.aspx
http://www.jeanpaulva.com/index.php/2014/05/21/content-enrichment-web-service/
http://msdn.microsoft.com/en-us/library/office/jj163968(v=office.15).aspx#content_enrichment_configuration
http://www.blendmaster.net/blog/2012/09/using-content-enrichment-web-service-callout-in-sharepoint-2013-preview/
Thanks,
Daniel Yang
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]
Daniel Yang
TechNet Community Support

BEx Analyzer not working in SAP GUI 7.10

Dear All,
BEx Analyzer 7.0 is not working on SAP GUI 7.10. Following are the details:
OS: Windows XP SP2
Installed the following softwares (in the sequential order):
1. Microsoft .Net Framework 2.0 SP1
2. MS Office 2003 (without any service packs)
3. SAP GUI 7.10 (used SAPAllSetup.exe) to install both BEx Analyzer 3.5 and BEx Analyzer 7.0 alongwith SAP GUI 7.10.
While BEx Analyzer 3.5 runs fine, 7.0 does not.
Upon running BEx Analyzer 7.0 from the Programs menu, I see a toolbar on the left hand side on MS Excel in German. Whenever I click on any button, they do not respond.
When I tried to install update for Office 2003 (KB907417), I received the message stating the patch has already been applied.
I also applied SAP GUI 7.10 Patch Level 8, but still the problem remains the same.
Running Tcode RRMX from the SAP GUI opens MS Excel with both the toolbars of 3.5 (on top) and 7.0 (on left). As before, 3.5 works fine, while 7.0 does not.
Do I need to install Office SP2 or SP3, as well? Or something else? Any solutions?
Thanks and Regards,
Sachin.

Hi All,
This problem is due to .NET 2.0 assembly(nothing but .dll's),
Step1 : Check if you can see this C:\WINNT\assembly\GAC exists
If it does and still getting the error, then follow these steps,
1) Uninstall office03
2) Uninstall GUI
3) Uninstall .Net 2.0
4) Reboot
5) Install .dll(WindowsXP-KB935448-x86-dll.exe) fix(this is due to .net1.1 and 2.0 coexistence)----- only if u get a critical message at startup.
5a) Reboot
5b) Install .net1.1
5c) Reboot
5d) Install .net2.0
5e) Reboot
6) Install office 03
6a) Reboot
7) Install .PIA's (O2003PIA.MSI)
7a) Reboot
8) Install setupall.exe for GUI
9) Install KB907---- (office2003-KB907417-FullFile-ENU.exe)
10) Reboot
Let me know if you encounter any problems.
OR....
Update the Latest Patchs of GUI & Bex.
BI710SP03_300-10004472.EXE
bi710sp04_400-10004472.exe
gui710_6-10002995.exe
Hope it helps you...
@shaik

Is it possible to create a Material Group Hierarchy in SAP ECC?

Hi,
I'm trying to create a Material Group Hierarchy (not a Product Hierarchy) in SAP ECC.
I've read some discussions about this theme:
MM Material group hierarchy ?
but still I'm sure if it is possible to create a Material Group Hierarchy in SAP ECC or if it is only an IS Retail functionality.
Thanks in advance,
Luis.

Please check this answered link:
Re: Material Group Hierarchy
Re: Material Group Hierarchy
Re: Material Group Hierarchy
Edited by: Afshad Irani on Jul 1, 2010 1:03 PM

Email service blocked and BBM not working on BB torch slide

HI.
I have real issues with my phone. First, my BBM stopped working, so I thought it was the bbm rim server because all other applications were working(whatsapp, email, facebook etch). Then I stopped receiving emails. Again, I didn't take it too seriously until I tried to send emails and a red cross appears with a message saying "service Blocked".
At this point, it is strange cause my browser works and my facebook. What really got me pissed was that my whatsapp stopped working as well, and I'm no longer on my mobile service plan, I'm using wifi at home. I was two seconds away from resetting my phone when it occured to me that it might not solve the problem.
I have looked at other possible solotions online and my phone does not have the advance system settings or the enterprise activation menu. I don't know what to do, HELP!!

Hi and Welcome to the Community!
Some clarification is needed...I cannot tell exactly if your device is a BES-enabled one or not...if it is, then stop now and seek support from your BES admins as they control, well, everything.
If you are not BES, then with a strong carrier network signal (e.g., not merely WiFi), I suggest the following steps, in order, even if they seem redundant to what you have already tried (steps 1 and 2 each should result in a message coming to your BB...please wait for that before proceeding to the next step):
1) Register HRT
KB00510 How to register a BlackBerry smartphone with the wireless network
Please wait for one "registration" message to arrive to your Messages app
2) Delete and Resend Service Books (pre-BB10 devices only)
KB05000Delete the service book for the BlackBerry Internet Service email account from the BlackBerry smartphone
If you have no CMIME entry, then skip the deletion
KB02830 Send the service books for the BlackBerry Internet Service
Please wait for "Activation" Messages, one per already configured email account, to arrive in your Messages. If you have no already configured email accounts, please wait 1 hour.
3) Reboot
Pre-BB10 Devices ONLY. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes.
BB10 Devices. Hold the top button down until the counter reaches zero. Wait for the device to be fully shut down (e.g., nothing at all displayed on the screen, no LED lights, etc.). Hold the top button until the red LED is lit. Wait through the full boot-up process. IF this fails, you can attempt the battery-pull method above, but it is normally NOT recommended unless nothing else works.
See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
Hopefully that will get things going again for you! If not, then you should contact your mobile service provider for formal support.
Then again...
misskedia wrote:
and I'm no longer on my mobile service plan, I'm using wifi at home.
If, by that, you mean that you have allowed your mobile service plan to expire, then that could explain everything. There are many services on BBs that are proprietary, and access to them requires subscription to an adequate data plan from your provider, regardless of the channel you use them through. Even if you only use WiFi as your connection pathway, you still must have an adequate data plan from your carrier in order to do many things, including email and BBM.
So if that's the case, then it explains everything...sometimes, when a data plan is allowed to expire, it takes the carrier a few days (sometimes longer) to "catch up" and shut things down that you are not paying them for.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

America's top number one wireless service...does not work in Puerto Rico

Please come back to Puerto Rico. I have been a member for over ten years. I live in Ohio and will have to relocate to Puerto Rico. My daughter is enrolled in college to become a school teacher in Puerto Rico. My family plan is not working well in Puerto Rico. I am paying for a family plan, (here in Ohio) and my daughter has two phones in Puerto Rico. They are not working. I had called Verizon Support, and was told that the phones must be mailed back to (Ohio) me here in the states to be reactivated. Verizon phones cannot be activated in Puerto Rico. I prefer only Verizon, which is why I have not switched to any other provider. But, because Verizon does not have towers or businesses in Puerto Rico, even though we have 4G phones, we now have no service in Puerto Rico. I am stuck with the choices of AT&T, T-Mobile, or Straight Talk from Wal-Mart, or the WORSE are the wireless and Internet services of Puerto Rico, Claro.. Claro has outages for DAYS and still expect full payment, regardless of how many days lost for service. Claro does not credit your account even if you had an outage for a week; you are still billed for the full month. It is difficult to avoid this company in Puerto Rico. This is a message to CEO of Verizon...please bring your business back to Puerto Rico. When people asked my daughter what service she uses, they were excited when she said that she uses Verizon. But were disappointed when she said that her account is back in (Ohio) the states, there are no stores here. I have to send (AGAIN) two new phones activated here in the states back to Puerto Rico, so that my daughter can still use our Verizon Family Plan. There is nothing Verizon Support can do. Once I move to Puerto Rico, there will be no one to send our phones to in (Ohio) the states to reactivate for our Verizon Family Plan. The phone service works for about three or four months, (in Ohio) than there is no service at all. Please bring America's top number wireless service back to Puerto Rico. Or Make some kind of deal with the wireless tower owners in Puerto Rico, so people that even visit Puerto Rico can use your phone service. Thank you for reading my request

Our home line has had no dial tone for two days now. When a repair was requested, we received a commitment of 8/8. That timing was not sufficient. I updated the repair request on line indicating that we needed the repair by today. I called this morning and a recording told me that Verizon was committed to repair the phone by 8pm tonight. Well, 9:30pm and no Verizon. I tried calling with my cell phone and sat on the phone for over 30 minutes. Either no one was home or it was past business hours. In any event, here we sit with no home phone service. We are elderly. My husband has a heart condition. I am grateful for our cell phones, not Verizon. What if we had a real emergency and didn't have cell phones? This is not customer service. We never even received a phone call or an email as we requested on the repair status. So sit another day or maybe more. Frustrated in NJ. P.S. Our experience with My Verizon is it sends you round and round and round with no real solution to your problem. Any suggestions? Thanks.

Shared Components Images Create Image does not work

I am using oracle XE on Windows XP.
Uploading an image for an application does not work.
Home>Application Builder>Application 105>Shared Components>Images>Create Image
It goes wrong when I try to upload the image:
- Iexplorer gives an error 404 after pressing the Upload button.
- Firefox just gives an empty page.
When I try to refresh the resulting page (do another post) I get the following error:
Expecting p_company or wwv_flow_company cookie to contain security group id of application owner.
Error ERR-7621 Could not determine workspace for application (:) on application accept.

Hi Dietmar,
After setting the language to English (USA) [en-us] it works for +- 50 % of the uploads.
Below is my tracefile.
Dump file e:\oraclexe\app\oracle\admin\xe\bdump\xe_s001_2340.trc
Wed Nov 23 19:03:17 2005
ORACLE V10.2.0.1.0 - Beta vsnsta=1
vsnsql=14 vsnxtr=3
Oracle Database 10g Express Edition Release 10.2.0.1.0 - Beta
Windows XP Version V5.1 Service Pack 2
CPU : 2 - type 586
Process Affinity : 0x00000000
Memory (Avail/Total): Ph:267M/1014M, Ph+PgF:1431M/2444M, VA:1578M/2047M
Instance name: xe
Redo thread mounted by this instance: 1
Oracle process number: 15
Windows thread id: 2340, image: ORACLE.EXE (S001)
------ cut ------
*** 2005-11-23 19:50:44.718
*** ACTION NAME:() 2005-11-23 19:50:44.718
*** MODULE NAME:() 2005-11-23 19:50:44.718
*** CLIENT ID:() 2005-11-23 19:50:44.718
*** SESSION ID:(26.18) 2005-11-23 19:50:44.718
Embedded PL/SQL Gateway: /htmldb/wwv_flow.accept HTTP-404 ORA-01846: not a valid day of the week
*** SESSION ID:(27.19) 2005-11-23 19:50:51.937
Embedded PL/SQL Gateway: /htmldb/wwv_flow.accept HTTP-404 ORA-01846: not a valid day of the week
*** 2005-11-23 19:50:59.078
*** SERVICE NAME:(SYS$USERS) 2005-11-23 19:50:59.078
*** SESSION ID:(27.21) 2005-11-23 19:50:59.078
Embedded PL/SQL Gateway: Unknown attribute 3
Embedded PL/SQL Gateway: Unknown attribute 3
Strange error... there is nothing in my form that is related to dates...
Kind regards,
Pieter

New created Shortcuts does not working

Hello,
I tried to create a Shortcut for open Terminal in Finder so I turned it on in System preferences -> Keyboard.......
But I does not working ! I tried reboot system, delete com.apple.symbolichotkey.plist from user/Library/Preferences folder and still nothing.
I have any services in finder too.
Please, help.

Are you using the default "Launch Terminal" service (or one of the others), or did you create your own?
If your own, how did you make the service?

IPad and PPTP VPN - Internet access (e-mail & Safari) not working

Hi there!
I've got an iPad2 (WiFi only) and need to configure it to use Witopia PPTP VPN, which is the VPN provider I've been using for a long time on my desktop and netbook.
Configure the iPad was an easy task, and I was able to successfuly authenticate and establish a PPTP session with any of the Witopia servers.
The problem is that once established the PPTP session, if the "send all traffic" option is ON, I have no Internet access at all (no e-mail neither browsing with Safari). Then, if I stop VPN, turn OFF the "send all traffic" option in the iPad, and start VPN again, I have Internet communication back and everything starts working fine. I've been fiddling with this in my home network (D-Link Dir-655 router using the IP 192.168.0.1 addressing scheme for my LAN).
Obviously, I decided to leave the "send all traffic" option OFF, but then I discovered that doing this my Safari traffic is not encrypted and my IP is not masked, i.e. the VPN is up and running, I have normal Internet traffic, but the service to be provided by the VPN for some inknown reason is not happening.
Does anyone have a clue about what's going on ?
TIA
RTadeu

Have you tried a battery pull? If not, give that a try and then try again.
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

Web Service Client(Console App) not working on Windows Server 2008 R2 Standard Edition

I am trying to consume an ASMX Web Service in a console app, its working fine in Windows 7,Windows Server 2012 Standard,Windows Server 2008 R2 DataCenter,Windows Server 2008 R2 Enterprise, But its not working in Windows Server 2008 R2 Standard Edition which
is the deployment server.
I tried consuming the ASMX web service using Web Reference and Service Reference as well but its not helping. Its throwing up the following error,
Message:There is an error in XML document (1, 331491).
Inner Exception : System.Xml.XmlException: '.', hexadecimal value 0x00, is an invalid character. Line 1, position 331491.
The scenario is that i call the web service and it returns me an XML i am not able to receive the XML on Windows Server 2008 R2 Standard Edition.
Please provide suggestions on this I need to resolve this ASAP.

Hi,
This question is better asked here:
http://social.msdn.microsoft.com/Forums/en-US/home?forum=asmxandxml
Experts here are more familiar about it and they can give you more efficient suggestion.
Thank you.

Internet on Treo Pro (GSM) not working

If I want to access the internet to browse webpages on my Treo Pro, I do not get anything while connecting through GPRS. When connected through Wifi it does work. I think it is not the internetconnection itself since I do receive my e-mails through GPRS; it does connect without problem. However, while browsing the internet internet explorer hangs while trying to find a webpage. What can be wrong?
Post relates to: Treo Pro T850U (Unlocked)

I'm having the same problem and have asked for a new phone. I worked with tech support with Bell, did hard resets twice and they even took me off their system and put me back on ... all to no avail. The internet is not working. If my Treo Pro is sitting on the cradle, connected to my PC, the internet works fine, but when I take it off, an error message says, "Cannot Connect: Cannot connect wth the current connection settings. To change your connection settings, tap Settings." The tech people told me to go to settings and manage "My Work Network / Manage Existing Connections." There, all I do is make sure the number is #777 and that's all. After a hard reset, it clears this connection setting. So I can still not connect to the internet unless it's connected to the PC via the USB cable / cradle. Something else must be set up wrong. Any help would be greatly appreciated.

PDF created on MAC not working on windows 7

PDF created in Indesign CS6 on MAC is not working properly in Indesign CC on windows 7. I'm using PDF2ID to convert pdf. I'm sending pictures to show how it looks like in InDesign after convertion and in the Adobe Reader. And convertions took so long or crashes my InDesign... What can I do to fix it?

Were you expecting a perfect conversion? If so, that’s not going to happen.
If you’re having issues you think need to be addressed contact Recosoft.

ITServer - Internet Service created by us not working in SAP ECC

Similar Messages

Maybe you are looking for