ITunes 10.5.3 Installation on Windows XP SP3: hanging on "Registering iTunes Automation Server"

I have uninstalled successfully iTunes 10.5.1 from my notebook and reinstalled iTunes 10.5.3.3. Unfortunately, in reinstallation process, iTunes is hanging on "Registering iTunes Automation Server" for over 3 hours!!!!!!!! Quicktime, Safari, Bonjour, Apple Application Support, Apple Mobile Device Support, Apple Software Update are all reinstalled successfully!!! WHAT's the problem for my notebook? How to overcome this issue??? Please help me !!!!!!!!!!!!!!!!!!!!
System:Windows XP SP3
Apple iPhone 4S, iPad 2, iPod Classic

Noboday has ideas about this issue???

Similar Messages

My itunes cannot be update on my windows xp. so i delete my itunes and install new, but now i got new problems, it says "The file itune.library.itl cannot be read because it was created by newer version of itunes." so how can it be solved?

my itunes cannot be update on my windows xp. so i delete my itunes and install new, but now i got new problems, it says "The file itune.library.itl cannot be read because it was created by newer version of itunes." so how can it be solved?

Hello Bebyida,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
http://www.apple.com/itunes/download/
Best of luck,
Mario

Itunes install hangs at "registering itunes automation server"

Windows 8 - 64 bit
Loaded latest Quick Time.
uninstalled itunes ...rebooted...tried installing again but still hangs at "registering itunes automation server"
When I click on "cancel" install...it starts to roll back and says "Files missing"
Thanks

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2

Itunes 11.0.2 installer for Windows 7 (64 bit) freezes?

I'm having a problem installing iTunes 11.0.2.26 on Windows 7 64-bit. I have tried both the automatic updater and a full uninstall/reinstall with a standalone instalation. It seems to get stuck around the same point. If I try the automatic updater first Safari installs then iTunes starts to install. The iTunes installation gets to around 90% then the installation stalls. There is no error message and the installer just says "Installing..." but the CPU usage drops to 0% on both cores. I have left the installer sitting like this for hours without it finishing. I have not heard anyone else complain about long installation times or stalling. A very similar problem happens if I try to uninstall and then do a standalone installation. The installer gets near the 90% point on the bar and then the process just stops and hangs. If I try to cancel the installation at this point, the installer will stop responding and then I have to end the process. Any help on this frustrating issue would be appreciated!

You can try downloading 7-Zip (free), or a free trial of WinRAR, and unpack the iTunesSetup.exe or iTunesSetup64.exe file into its components then try installing them individually in alphabetical order (don't try to install SetupAdmin.exe or iCloud.msi). You may get a more useful error message as to which component has problems.
tt2

HT1174 Cant sync Ipad with Itunes, have run tests can see Apple USB port in devices but Itunes doesn't recognise it. Windows auto play doesn't have Itunes as an option. how can I get to work please

Does anybody know why Itunes can no longer sync to my Ipad, on pluggine in USB windows autoplay kicks in any doesn't give me option to connect to Itunes when opeining devices no option available to selt Itunes either.

Hey bron_cross,
Wow, Superb troubleshooting so far! Usually for the symptoms you have described, I recommend the sub-step titled “If the device is not recognized while in Recovery Mode” located in Step 5 of this article:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
However, it seems like you have exhausted all of the suggestions in that step. Did you happen to move on to Step 6: Check for third-party software conflicts? If not, here is the excerpt:
Certain phone and cellular device connectivity software from vendors such as Samsung, Nokia, Bora, Novatel, Sony, Android, LG, Sierra, Huawei, Pantech, or Motorola may cause your device not to be recognized. If you have such software on your computer:
1. Uninstall the phone or cellular connectivity software temporarily, and test. Contact the manufacturer of this software for assistance in doing this. If you use the third-party phone or cellular device for your Internet connection, try connecting to an alternate network using Wi-Fi or Ethernet.
2. Remove iTunes and all related Apple software by following this article (for Windows XP), or this article (for Windows Vista, Windows 7, and Windows 8).
3. After reinstalling iTunes, test the device.
4. If you still need your third-party phone or cellular connectivity software that was removed, reinstall this software and test your device to ensure it still functions with iTunes. Contact the vendor of your phone connectivity software if the issue returns.
Also, third-party security software may conflict with iOS devices connecting to iTunes. Follow this article to troubleshoot issues that may be caused by your security software. After resolving any issues you may have with your security software, you may need to try the steps in this article again.
Thanks,
Matt M.

11GXE beta: Failed Installation on Windows XP SP3 with No errors

After struggling to understand why my database can't be started it appears that there was a series of errors during installation that left behind a 'crippled' instance with nor control or data files. NONE of this was reported by the Installation wizard. Only after digging into log files I'm able to see the extend of this failure.
I'm tracing this from the C:\oraclexe\app\oracle\product\11.2.0\server\config\scripts\XE.bat file that is used to configure the server
So looking at sequential log.
C:\oraclexe\app\oracle\product\11.2.0\server\config\log\XE.bat.log
Instance created.then three scripts are executed
C:\oraclexe\app\oracle\product\11.2.0\server\config\scripts\CloneRmanRestore.sql
C:\oraclexe\app\oracle\product\11.2.0\server\config\scripts\cloneDBCreation.sql
C:\oraclexe\app\oracle\product\11.2.0\server\config\scripts\postScripts.sql
The first one appears to fail and then of course the rest follow:
Here is the created log
SQL> startup nomount pfile="C:\oraclexe\app\oracle\product\11.2.0\server\config\scripts\init.ora";
ORA-28056: Writing audit records to Windows Event Log failed
SQL> @C:\oraclexe\app\oracle\product\11.2.0\server\config\scripts\rmanRestoreDatafiles.sql;
SQL> set echo off;
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
ERROR:
ORA-28056: Writing audit records to Windows Event Log failed
ORA-01075: you are currently logged on
SQL> spool C:\oraclexe\app\oracle\product\11.2.0\server\config\log\cloneDBCreation.log
Many of the other logs contain mostly the echoed SQL staements and SP2-0640: Not connected
I'm thinking re-executing the XE.bat to recover. Any feedback?

I'm not sure that executing restore script will help.
imouts wrote:
SQL> startup nomount pfile="C:\oraclexe\app\oracle\product\11.2.0\server\config\scripts\init.ora";
ORA-28056: Writing audit records to Windows Event Log failedOn your place I would try to repeat clean installation, but before that increase the log size -> clear the event logs.
Control Panel --> Administrative Tools --> Event Viewer --> Clear All Events
Hope this helps.

Hyperion installation on windows xp sp3

hi all
I need to install hyperion on my laptop( 2GB ram 500GB HD), is there any installation guide and are my hardware resources are enough to run the software properly?
thanks for help

I've been happy with 8GB RAM on a HP Pavilion dv6 with quad-core i5 2.3GHz. I'm running 64-bit Windows 7, 64-bit Oracle 11g, WebLogic, IIS, Oracle HTTP Server, Oracle Access Mgr, BPEL, DRM 11.1.2, DRM WDK, etc. and I can productively work on email, documents, presentations, etc. with all of that running. With 4GB and a dual-core processor you can get it running but your machine will struggle at times. When I bring up the Oracle database and the DRM service, before any versions are loaded my machine is utilizing over 5GB RAM.

HT204370 I try to connect Disney Movies Anywhere account to iTunes and I keep getting a window that wants me to download iTunes. I already have the latest version of iTunes.

I am trying to link my Disney Movies Anywhere (DMA) account with my iTunes account following the instructions on the DMA website. I am redirected to Apple's website to download iTunes. I already have iTunes on my computer. I followed the Apple prompts and iTunes was uninstalled and reinstalled and I still cannot link the two accounts.

This is what someone else suggested on one of these threads. I was having the exact same problem, but this worked out for me! I hope it works out for you too.
Livin4Jesus wrote:
I don't know if this will fix your problem but it fixed mine. Everytime I clicked connect it would prompt me to download iTunes even though I already have it until I tried using the Google Chrome browser (it wouldn't work in IE) but in google when I clicked connect it opened my iTunes application and iTunes prompted me to connect the accounts. Hope this helps.

Itunes 10.5 crashes on startup, windows XP SP3

I upgraded to 10.5 and now it crashes on start up. I have disabled MS Data Execution Prevention. System software is XP pro SP3. I completely uninstalled all Apple programs and reinstalled them without success. Suggestions?

Still did not work. Thanks for the suggestion though. I did the reset catalog & receive a success message and rebooted per message. Now when launching iTunes I get an illegal instruction error "An attemp was made to execute an illegal instruction. (0xc000001d) occurred in the location 0x001deabc". I don't know what this one means. I only got his error the first time. I rebooted just in case & now iTunes just gives the MS message "iTunes encountered an error and needs to close". I have reinstalled all the Apple related programs - QuickTime, iTunes, Apple Software Update, Apple Application support, Apple mobile device support, & Safari. Any other suggestions.

How can I prevent iTunes 10.5.2.11 64bit on Win7 64bit hanging while "Accessing iTunes Store"

Recently iTunes has started to hang on open on my win7 64 bit system. It attempts to access the itunes store before I can do anything else, and simply hangs. I can't proceed past this point, so can't configue any options such as deauthorising then reauthorising the computer, for example. I have completed some basic troubleshooting steps e.g. disable firewall software temporarily, confirm network access from this and other systems, remove and reinstall itunes, perform repair installations, etc. But to no avail. It seeems to be a pretty common problem, with the commonly offered resolution of the deauth / auth I mention above. Does anyone have a fix? Or, is there a way to configure itunes preferences outside of itunes? Perhaps I can deauth / auth there to see if it will resolve the issue? (I can't deauthorise all my computers as I have recently performed this previously, i.e. inside the (three month) window0. I may have to call apple support for assistace to resolve this, but trying to avoid this as there is often a bit of a lag there.
Thanks for reading.
[email protected]

If you are still having these type of problems after trying the winsock reset and are running any kind of net monitoring software like Bsecure, Net Nanny, AVG Family Safety, Safe Eyes, Covenant Eyes, Norton Online Security etc... I would suggest that you try uninstalling said software and reinstalling iTunes 10.5 to see if that corrects the issue.
Refer to article TS4123. Follow the step to identify which software in your system is the culprit and uninstall it.
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
Last Modified: November 28, 2011
Article: TS4123
Symptoms
You may notice the following symptoms after installing iTunes 10.5 for Windows:
iTunes is slow to respond
Windows is slow to respond
iTunes stops responding when backing up or syncing with an iPhone, iPad, or iPod touch.
Some processes installed by iTunes are using up a lot of resources in the Windows Task Manager.
iTunes Store looks empty and white as shown below:
Products Affected
iTunes Store, iTunes 10 for Windows
Resolution
Look for modifications to Windows by:
Running MSINFO32 by choosing either Start > Run, or using the search box to search for
Once it is open, expand Components and then expand Network.
Click Protocol. The first value should look like this:
However, if you find a value that is more like this, it indicates that there's an LSP (Layered Service Provider) monitoring your computer:
"<LSP Info>" is variable and may specifically mention a software suite, or appear to be a meaningless acronym
Scroll through the list on the right and look for any LSPs that have been installed by third-party software. By default, the Windows OS will have 10 values:
MSAFD Tcpip [TCP/IP]
MSAFD Tcpip [UDP/IP]
RSVP UDP Service Provider
RSVP TCP Service Provider
MSAFD NetBIOS [\Device\NetBT_Tcpip...
The value above repeated 5 times with additional variables at the end
Note:811259.Once you've identified the third-party LSPs, determine which software placed them there. Here is a partial list of LSPs you might run into and the software that may have placed it there:
Product or Manufacturer
LSP Name
Bigfoot Networks
BfLLR over [MSAFD Tcpip [TCP/IPv6]]
ByteMobile, Inc.
BMI over [MSAFD Tcpip [TCP/IP]]
Covenant Eyes
Covenant Eyes Monitoring over [MSAFD Tcpip [TCP/IP]]
PC Tools / Spyware Doctor
PCTOOLS over [MSAFD Tcpip [TCP/IP]]
SafeEyes
Internet Content Filter over [MSAFD Tcpip [TCP/IP]]
SpeedBit Video Accelerator
SBLSP over [MSAFD Tcpip [TCP/IP]]
VMWare
VMCI sockets DGRAM
Once you've identified the third-party software that installed the LSP, you can remove that software. If the software is your security software, see iTunes: Troubleshooting security software issues for additional information.
Note:locate vendor information
Reset the WinSock key
If you are unable to identify the software that installed the LSP, you are unable to remove this software because it performs an important function for you, or you've removed this software and the issue persists, you may wish to reset the WinSock key.
To do so, please do the following in an administrator user:
Windows Vista and Windows 7:
Windows XP:Enter the following command:
netsh winsock reset
Restart the computer and test the issue.
Note: If the issue returns, third-party software may be reinserting the LSP.

Windows XP SP3 Hangs in Boot Camp 3.1

I upgraded to Snow Leopard and Boot Camp 3.1 on my iMac 24". My old BC partition with XP Sp2 worked fine, but when I tried to update to Sp3 it installed fine but hangs at the loading screen. I've removed and re-installed Sp3 a couple of times with the same result.
All help appreciated

Some more data.
Setuperr.log contains the following item:
{quote}Error:
Setup encountered an error while trying to set system security.
The data is invalid.
{quote}
Setupact.log gave the following:
{quote}The external program RUNDLL32 shell32,Control_RunDLL intl.cpl,,/f:"C:\WINDOWS\system32\$winnt$.inf" /s:"E:\I386" returned exit code 0.
NetSetup: SetupMode: 0x1, ProductType: 0x0, OperationFlags: 0x8000
Setup encountered an error while trying to set system security.{quote}
Setuplog contains this:
{quote} Installing device: ROOT\MEDIA\MS_MMMCI, GuidIndex = 13, Index = 0
01/30/2010 21:10:05.343,d:\xpsp\base\ntsetup\syssetup\syspnp.c,2501,,SETUP: Class Installer appears to be hung (phase3). DeviceId = ROOT\MEDIA\MS_MMMCI
01/30/2010 21:10:05.343,d:\xpsp\base\ntsetup\syssetup\syspnp.c,2532,,SETUP: Skipping installation of legacy device (phase3). Device = ROOT\MEDIA\MS_MMMCI{quote}

ITunes 11.1.4.62 for Windows Breaks iTunes Match

After upgrading to iTunes 11.1.4.62 for Windows 7 Ultimate 64-bit, my iTunes Match no longer works. It insists that I pay for another subscription even though I have a valid subscription already. This issue has been going on for over a week with no response from Apple Support. Is anyone else experiencing a similar issue? What can I do to remedy this problem?

I use a utility called ByeTunes that removed Itunes completely of my pc "It's free" and got a good down load of Itunes.a few weeks after they correct the upgrade.LOL

ITunes 11.0.1 on Windows XP SP3 32-bit Cannot see text (font does not display)

I have installed the latest version of iTunes on my home PC with Windows XP SP3 (Service Pack 3) 32-bit Home Edition.
I cannot read the text on many iTunes screens/pages due to the font not showing at all.
I have also tried to install the Segoe UI true-type font (and its variant such as bold, italic, etc.) but the problem remains.
Please help.

I have eventually managed to resolve my issue by:
1) Installing "Segoe UI" fonts in the C:\Windows\Fonts folder.
2) Changing my default colour profile to "sRGB Color Space Profile".
Navigate to My Computer > Control Panel > Display > Settings > Advanced > Color Management.
Click Add button and select sRGB Color Space Profile.icm from the Add Profile Association pop-up window.
Select sRGB Color Space Profile.
Click on the Set as Default button.
Click on Apply, OK, OK.

NI 488.2 - 3.1.1 installation error (windows 7)

Hello,
I tried to install the NI 488.2 driver to connect an GPIB-USB-HS device on my computer.
All my try were unsuccessful (execute as administrator, desactivate my antivirus software,...).
The joined messages appeared.
Thank you in advance for your advices
Solved!
Go to Solution.
Attachments:
Message.7z ‏61 KB

Hi FJNI,
I can't open *.7z files so i don't know what king of error message poped up while trying to install NI 488.2.
Is there any previous version of this driver already installed on your computer ? In this case, try to uninstall the driver and run again the 3.1.1 installer.
Did you download the driver from our website ?
http://joule.ni.com/nidu/cds/view/p/id/3786/lang/en
Could you try running the installer in windows Xp SP3 mode ? you can set this by right clicking on the installer, selecting "proprties menu" and going to "compatibility" section, Here is what it looks like (on a French windows 7 64 bits).
I hope this will help you,
Best regards
Vincent.O
National Instruments France
#adMrkt{text-align: center;font-size:11px; font-weight: bold;} #adMrkt a {text-decoration: none;} #adMrkt a:hover{font-size: 9px;} #adMrkt a span{display: none;} #adMrkt a:hover span{display: block;}
Été de LabVIEW 2014
12 présentations en ligne, du 30 juin au 18 juillet

ITunes Windows XP SP3 Home Edition does not importing music CDs

Itunes 10.6.0.40 on Windows XP SP3 Home Edition has stopped importing music CDs. It prompts me if I want to import newly inserted CD, click yes, itunes dones nothing. Although the song titles off the CD are listed after inserting the CD

Try restarting your Apple Mobile Device Service, kent:
iPhone, iPad, iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows
(Classics also use AMDS to a greater or lesser degree, so trouble with the service or other aspects of Apple Mobile Device Support can cause some grief with a Classic connection.)

ITunes 10.5.3 Installation on Windows XP SP3: hanging on "Registering iTunes Automation Server"

Similar Messages

Maybe you are looking for