Itunes 10.5 has stopped working message on windows vista

Hey Guys.
I've just updated to iTunes 10.5, currently running vista 32bit.
I get an error message when i try and start up itunes saying itunes has stopped working, then this...
Problem Event Name:          APPCRASH
Application Name:          iTunes.exe
Application Version:          10.5.0.142
Application Timestamp:          4e9243f2
Fault Module Name:          CoreAudioToolbox.dll
Fault Module Version:          7.9.7.8
Fault Module Timestamp:          4e72cbf1
Exception Code:          c0000005
Exception Offset:          0023e3c2
OS Version:          6.0.6002.2.2.0.768.3
Locale ID:          2057
Additional Information 1:          fd00
Additional Information 2:          ea6f5fe8924aaa756324d57f87834160
Additional Information 3:          fd00
Additional Information 4:          ea6f5fe8924aaa756324d57f87834160
in the tab.
Have tried install and fix, have tried uninstalling itunes and all apple software and reinstalling but no help.
Anyone got any ideas?

How many cds have you ripped since replacing the drive? I think you have just been lucky.
I mostly use an external cd drive. I still have the problem with both internal and external drives.
Remember this problem is random. I have tried 3 cds in a row and had no trouble, then on the 4th the issue is back.
I don't believe this issue will completely go away until Apple prvides a fix with an iTunes update.

Similar Messages

Skype has stopped working - message on windows 8.1...

This error message comes out everytime I start the desktop version...
The app from windows store though works , but I do not enjoy using it at all... the desktop client was always far better.
The problem rose when I upgraded my windows 8 to 8.1 , and since then the desktop client is always forced to close with a message that it has stopped working.
I did a few things that I found reading through posts where people were looking for help with their skype issues:
uprgraded my graphics card
disabled my integrated webcamera
uninstalled java
installed older skype versions
tried to rename the roaming skype directory to old_skype
disabled automatic updates
but... once again i'm helpless, and it seems that none of those solutions I found is at least a bit helpful for me...
I'm pretty much desperate ( I apologize if I did write my post into the wrong place)
hope someone can help me
Solved!
Go to Solution.

installed it but it ended with the same result
Log Name: Application
Source: Application Error
Date: 11/9/2013 2:38:22 AM
Event ID: 1000
Task Category: (100)
Level: Error
Keywords: Classic
User: N/A
Computer: Jay
Description:
Faulting application name: Skype.exe, version: 6.9.0.106, time stamp: 0x524bef36
Faulting module name: msvcrt.dll, version: 7.0.9600.16384, time stamp: 0x52158ff5
Exception code: 0xc0000005
Fault offset: 0x0000b1b0
Faulting process id: 0x1184
Faulting application start time: 0x01cedcec36b1e08d
Faulting application path: C:\Program Files (x86)\Skype\Phone\Skype.exe
Faulting module path: C:\WINDOWS\SYSTEM32\msvcrt.dll
Report Id: 9dfbe0e3-48df-11e3-bebe-2089845769fe
Faulting package full name:
Faulting package-relative application ID:
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Application Error" />
<EventID Qualifiers="0">1000</EventID>
<Level>2</Level>
<Task>100</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2013-11-09T01:38:22.000000000Z" />
<EventRecordID>13989</EventRecordID>
<Channel>Application</Channel>
<Computer>Jay</Computer>
<Security />
</System>
<EventData>
<Data>Skype.exe</Data>
<Data>6.9.0.106</Data>
<Data>524bef36</Data>
<Data>msvcrt.dll</Data>
<Data>7.0.9600.16384</Data>
<Data>52158ff5</Data>
<Data>c0000005</Data>
<Data>0000b1b0</Data>
<Data>1184</Data>
<Data>01cedcec36b1e08d</Data>
<Data>C:\Program Files (x86)\Skype\Phone\Skype.exe</Data>
<Data>C:\WINDOWS\SYSTEM32\msvcrt.dll</Data>
<Data>9dfbe0e3-48df-11e3-bebe-2089845769fe</Data>
<Data>
</Data>
<Data>
</Data>
</EventData>
</Event>

Skype has stopped working - message on windows 8.1 desktop version

This error message comes out everytime I start the desktop version...
The app from windows store though works , but I do not enjoy using it at all... the desktop client was always far better.
The problem rose when I upgraded my windows 8 to 8.1 , and since then the desktop client is always forced to close with a message that it has stopped working.
I did a few things that I found reading through posts where people were looking for help with their skype issues:
uprgraded my graphics card
disabled my integrated webcamera
uninstalled java
installed older skype versionstried to rename the roaming skype directory to old_skype
disabled automatic updates but... once again i'm helpless, and it seems that none of those solutions I found is at least a bit helpful for me...
I'm pretty much desperate ( I apologize if I did write my post into the wrong place)
hope someone can help me

eltawil13 wrote:
the (main.db database file) is not corruptedi test with SkypeLogView and file open no problems , when i put the file to another pc with same skype ver but windows 7 or 8 its working no problems , i checked the drivers and all ok , the problem just with windows 8.1Please, run the DirectX diagnostics tool. Go to Windows Start and in the Run box type dxdiag.exe and press the OK button. This will start the DirectX diagnostics program. Run this diagnostics and save the results to a file. Please, attach this file to your post. Be aware that you will have to zip this file before attaching it here.

Firefox just updated to itself and now I am getting a "SystemK has stopped working". Running windows Vista on a HP Pavillion.

Firefox update on Nov 6th at 6:32pm to 33.0.3 (20141105223254) and since I've been getting a Micro Soft Windows system message saying "SystemK Module has stopped working". It appears to be generated from Firefox. I am running a HP Pavilion DV6748US with Windows Vista that is current on pushes from Micro Soft. I also run a current and updated version of Norton antivirus. Please provide direction to fix this error and if it is not affiliated with Firefox please indicate so. Thank you.

Hi dtenholder, I'm sorry to hear that you are having problems with the new update. I believe a while back I had a similar problem. At the time I didn't know what to do.
So just to make sure we are on the same page, when you click on Firefox you computer then has a popup box saying "SystemK Module has stopped working". If so I know how to fix this.
What you are going to need to do is remove Firefox from your computer. First you are going to want to uninstall Firefox. Next you are going to want to delete the Firefox installation folder (located in one of these folders by default):
C:\Program Files\Mozilla Firefox
C:\Program Files (x86)\Mozilla Firefox
After that download and instal a new copy of Firefox. Some good news is that a clean install will not delete your bookmarks, saved passwords, add-ons or other personal information. If you need any new information you can [http://mzl.la/1qP0CYM click here] .
Hope this helps. If you need any more information or this does not work for you please let me know.

ITunes has stopped working message! Windows is shutting it down. Etc etc.

My iTunes won't complete a sync ever since I updated to latest software. I've done all the uninstall reinstall suggestions and it still diesnt work on windows 7 home premium! How can I fix this? I can't live without music on my phone!

Im having the same problem.
I phoned Apple Customer Care and spoke to a very helpfull man who took me through some trouble shooting processes before suggesting I uninstall and re install.
I did this but am still having the same problem.
Have you had any luck fixing yours?

Hi there, I have recently noticed that Itunes has stopped working on my Windows Vista PC. I wasn't too concerned about it as I had everything on my iphone and rarely used it. But I recently bought an iPad and I want to sync it to my itunes account.

I am getting a message that the Data Execution Protection Settings are closing the itunes program. But , when I try to change the DEP settings it is not possible to do it for itunes. I have also tried to un-install and reinstall the itunes ( and apple related programs ) but that hasn't worked either. I am not sure that I have done that correctly though as I have been told it is difficult to do? Any help would be very much appreciated! Thanks!

I knew that, my question was more about the viability of using the ATV without having a TV connected and contolling it directly from an iPad to stream music.
Jim

HT203175 After upgrading to version 11.0.4.4 I get a "Itunes has stopped working" message when I try to start a movie on my PC. I have updated Quick time and previous version of Itunes worked great.

After upgrading to version 11.0.4.4 I get a "Itunes has stopped working" message when I try to start a movie on my PC. I have updated Quick time and previous version of Itunes worked great.

One thing is for sure, and that is if the only page i visit is the Google homepage (not logged in) or this site (mozilla forum), the problem does not occur, ever. I can't make it happen.
If i visit yahoo.com (not logged in) (or ighome.com, logged in), as examples, it happens every time.

After upgrading, I am getting the dreaded "iTunes has stopped working" message. I've followed all of the troubleshooting tips on the forum without success. Fortunately, it works on my other computers. Running Win7 pro.

After upgrading iTunes, I'm getting the dreaded "iTunes has stopped working" message after launch. I've tried the troubleshooting tips on the Forum without success (though most are pretty old...). Fortunately, iTunes works on my other computers, but I have iPad backups on this one that I'd like to keep. Anybody else with this issue??

My inclination is that it is something in the projects or in the manuals being linked that is the culprit because that is where the consistency lies - projects were created identically and manuals all follow identical formats. The problem typically only occurs after the project has been successfully created and the manual is subsequently updated and I am syncing the manual in RH so I can generate a new AIR file. This is the first time the project has consistently corrupted every time I try to generate the Word document after linking it in RH. This makes little sense to me since it generated fine a couple weeks ago and I did nothing special when I updated it in Word yet when I tried to update it in RH, that is when it originally corrupted. The bottom line is that I cannot 100% trust that any project I run will work the next time. I end up just crossing my fingers and hoping for the best.
My problems seemed to start once I went to RH9 (from RH8) because we had upgraded from MS Office 2003 to the 2010 version and I needed 9 for the docx extension. Like I said, it is not all the time - I can be beating my head against the wall getting one of the projects to work, then create 3 more projects that have no problems and then the next one leaves me wanting to throw my PC through a window....
Deleting the CPD does not corrupt the project, it just removes my default linked document that allows me to circumvent linking the styles individually for that project. Once I have a manual linked and I remove the CPD, it just creates a new one. What I am saying is that if I delete the CPD file, it does not prevent the project from corrupting nor does it make the corrupted project viable again.
thanks!
Kathi

When iTunes closes I get " iTunes has Stopped Working message"?

iTunes works and runs fine on my Vista Ultimate system, however, every time I close iTunes I get a message stating that iTunes has stopped working. I havn't noticed any functionality loss, it's just that the dialog box is annoying. I just did a recent clean install of my Vista OS. Was the same way on last two versions of iTunes. Ran and installed Windows updates, reinstalled iTunes and Quicktime. Created and additional user and same message for that user.
Running Norton 360, Ghost 12, Logitech 518 mouse G15 Keyboard, and software is Nero 7 ultra, Pinnacle Studio 11, PowerDVD 7, Call of Duty: UO.
Any suggestions?
ty

Hi,
I experience a similar issue.
iTunes runs fine, and I can sync my nano as I did on XP.
When I listen to music through my Airtunes device, music streams just fine,
but when I close iTunes, I get the "Stopped working"-message.
If I change back so I listen on the computer instead, and then close iTunes, everything closes just fine without the error.
The error is reported as follows in Event Viewer:
Faulting application iTunes.exe, version 7.4.3.1, time stamp 0x46f9e539, faulting module iTunes.exe, version 7.4.3.1, time stamp 0x46f9e539, exception code 0xc0000005, fault offset 0x001227ac, process id 0x1348, application start time 0x01c80b73fd90b27c.
Do you also use AirTunes when you get the error?
Any help would be greatly appreciated.

One solution for 'iTunes has stopped working' message

This worked in my case for iTunes 10.5 on a Dell Inspiron 1525 running 32-bit Vista. Symptoms started after I had to re-install it. Suddenly, whenever I tried to dl anything from the store, the dl would hit 100%, then I'd get the error message and DEP would then shut down the program. Upon re-starting, the dl wouldn't be in my apps list. (However, the actual dl WAS in my iTunes folder -- it's just that iTunes couldn't 'see' it.)
I followed all all -- and I mean ALL -- the Apple guides over the course of 2 days with no success, even after numerous re-installs. Also tried every obsure suggestion I came across in the forums here -- and there were a lot!
What finally worked for me were the suggestions at this link:
http://www.vistax64.com/tutorials/87249-unable-install-latest-version-program-vi sta.html
Following the suggestions there, I discovered uninstalled 'debris' residing in the App Data\Local and App Data\Roaming folders, specifically two Apple folders with content. I manually deleted these. These locations aren't mentioned in the Apple guide to manually uninstalling your iTunes. (http://support.apple.com/kb/ht1923)
I also discovered debris throughout the registry which I removed manually with regedit. (Make backups of your registry before you go rummaging around in there! The usual warnings apply...)
I also found two Quicktime files residing in the main Windows directory. (Ver 10.5 no longer installs Quicktime and I had un-installed my previous versions) I don't think these made a difference but 'off with their heads' anyway. (^-~)
BTW, all of this occurs after I used Revo Uninstaller in moderate mode. So even it didn't catch all the leftover debris. (I'm not brave enough to try it on a more aggressive setting...)
Thought I pass this on in hopes it saves someone some grief....

iTunes has stopped working message after having it open for one minute.
I open itunes and a message comes up after a minute "itunes has stopped working". I got the update automatically to my Windows 7 64 bit pc 10.5.0.142. After reading tons of probelms online about version 10.5
I have decided to do nothing for now. Seems people are putting hours into trying to fix it. I was going to uninstall and reinstall but seems that isn;t working for to many people.
How do we get some help from apple?
Anyone have any answers??? APPLE HELP please!!!!!!!!!!!!!!!

Getting itunes has stopped working message after downloading to Windows 8.1

Getting ITunes has stopped working message after 10 seconds after downloading to Windows 8.1

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
You could also try working through
TS1717: iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
tt2

ITunes has stopped working message after having it open for one minute.

It's fully updated to iOS 5 and was working fine until now. Running on Windows 7 and worked flawlessly till this point. Any tips? I already uninstalled and reinstalled. Only security software I run is Microdoft Security Essesntials and that has never been an issue. At a loss here.

iTunes has stopped working message after having it open for one minute.
I open itunes and a message comes up after a minute "itunes has stopped working". I got the update automatically to my Windows 7 64 bit pc 10.5.0.142. After reading tons of probelms online about version 10.5
I have decided to do nothing for now. Seems people are putting hours into trying to fix it. I was going to uninstall and reinstall but seems that isn;t working for to many people.
How do we get some help from apple?
Anyone have any answers??? APPLE HELP please!!!!!!!!!!!!!!!

Everytime I try to launch the iTunes store I get a message that iTunes has stopped working and that windows is searchning for a solution to the problem, but nothing gets fixed

everytime I try to launch the iTunes store I get a message that iTunes has stopped working and that windows is searchning for a solution to the problem, but nothing gets fixed

Hello mcgivnma,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/ts1717
Best of luck,
Mario

HELP PLEASE - "itunes has stopped working" message....

When I open itunes it opens up but after about 2 seconds a message comes up from Windows saying "itunes has stopped working" and that Windows is checking for a solution to the problem. It then stops checking and a new message comes up saying "A problem caused the program to stop working correctly, Windows will close the program and notify you if a solution is available" it doesn't come up with a solution and the the only available option it gives me is to close the program. I got the same problem a couple of weeks ago but it recommended that I install itunes 7.3 which i did and it has worked fine up until today.
It just so happens that I ordered a new 80gb ipod that I'm expecting tomorrow, so any help would really be appreciated.

Are you still having the issue? Do you regularly download podcasts? If so, take a look at the Download folder that appears under the Store on the left side of iTunes. Do you get the message when the Download folder appears?
If so, it might be a "bad podcast". I've been having the above issue for about 1 week and it turns out that there somehow was a bad entry in the list... As soon as iTunes trying to download it, it crashed. I deleted the entry and the problem went away...
It the meantime, I've set iTunes to only Manually download podcasts.

"itunes has stopped working" message when syching iphone

Need help..
Ever since I installed the update for the apple software on my PC, when I try to sync my iphone 4 on the last step of synching I get a window popping up saying that "itunes has stopped working". Then I get prompted to close the programme.
I run Windows 7, and cannot understand why it does this.
If anyone can help, I would greatly appreciate it.

Not sure what you've seen/tried so far, so I'll run you through my standard advice as of this morning, Marty.
There's a bug with 10.1.0.54, Amanda, that is causing "iTunes has stopped working messages" (citing CoreAudioToolbox.dll in the Problem Reports for the error) for some folks when importing CDs with the AAC encoding, adding/converting files to AAC, and in some cases syncing devices (when the convert to 128 kbps AAC option is enabled).
Short of rolling back your iTunes to 10.0.1.22 and your Apple Application Support to 1.3.2 (CoreAudioToolbox.dll is kept in the Apple Application Support program files), there's a few possible workarounds.
(1) Change your importing prefs to use a different encoding (won't help with the device syncing variation though), and/or disable the convert to 128 kbps AAC when syncing option.
(2) Replace your CoreAudioToolbox.dll version 7.9.4.0 with a 7.9.3.0 as per:
http://discussions.apple.com/thread.jspa?messageID=12576816#12576816
(3) Or, replace your CoreAudioToolbox.dll version 7.9.4.0 with a shadow copy of a 7.9.3.0 as per:
http://discussions.apple.com/thread.jspa?messageID=12583499&#12583499
(3 and 4 do help with the device-syncing variation.)

Itunes 10.5 has stopped working message on windows vista

Similar Messages

Maybe you are looking for