ITunes 10.6.1 update does not show newly imported music in viewer but files are in iTunes media folder, how to correct?

Updated to iTunes 10.6.1.7 today from 10.5 on a Win 7 SP1 64-bit machine and attempted to add new music to the library by both drag-n-drop and import files; this new music does not show up in the library viewer but has been added to the iTunes media folder. My iTunes 10.5 version was working properly prior to the update. Any recommendations to correct this issue? Thanks!

Immediately after the install, Windows was rebooted. I also attempted multiple variations of closing and restarting iTunes and/or reboot Windows. iTunes was unresponsive to mp3 files being added. Since I was unable to see the added music files to the library, I did not try to add other files.
Out of frustration, I let iTunes run over night and to my surprise the added music appeared in the library viewer the following morning. I can now add new mp3 (and AAC also) music files to the library and it immediately appears in the viewer. How or why it now works is a total mystery.

Similar Messages

Music I have downloaded through iTunes on my iPhone 5 does not show in my "music" app

Would anybody know what I can do? I've downloaded songs from iTunes on my iPhone 5, but hey are nowhere to be found.
I also have an iPhone 4 and he music settings on that phone seem to be he same and the same purchased songs ARE showing there and on my iPad too. Very strange. What could it be?!

Hi there,
The question that I want to ask can you try device on other computer? Best choise to isolate issue is with iPhone or computer/os.
Full reinstall of iTunes and Apple Software (drivers):
http://support.apple.com/kb/HT1925
Hope it helps,

FF (ubuntu reg update) does not show and allow editing .odt .ods .eml files in shared dropbox

https://www.dropbox.com/sh/fj1xcy2wpkvlk5u/AACx76XgAM70D96I_r8VUICwa?dl=0
in which
https://www.dropbox.com/home/PIEDE_TORTO_ESITI_DOC/PIEDE_TORTO_COMMENTI
contains an .odt shared with writing permissions
thanks many

* not that obviously, online editing

After update to IOS 6.0, on the iPhone 4 and 4s, emails can not be forwarded. I tried to resync, but the update does not show the forwarding buttons anymore.

After update to IOS 6.0, on the iPhone 4 and 4s, emails can not be forwarded. I tried to resync, but the update does not show the forwarding buttons anymore.

Have the same issues here, 3GS 5.0.1. Did you find any solutions until today ?
I restored my phone, power up/down but nothing helps with my issues
greetings
/Edit:
Maybe I should read carefully your text so I can give you some more information.
my phone was updated via itunes.
some hours ago the phone charged up to 5% but than directly draining to zero...
can't help me with these issues...

While updating my ipad to new software through itunes it got stuck and does not work anymore - it just displays the screen with symbols of itunes and the cable to connect to it - help - what should i do?

while updating my ipad to new software through itunes it got stuck and does not work anymore - it just displays the screen with symbols of itunes and the cable to connect to it - help - what should i do?

Disconnect the iPad, do a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. The screen will go blank and then power ON again in the normal way.] It is 'appsolutely' safe!, reconnect and follow the prompts.
If that does not work then see here http://support.apple.com/kb/HT1808

ITunes on new Mac Mini does not show shared libraries on network or songs on NAS drive

iTunes on new Mac Mini does not show shared libraries on network or songs on NAS drive
The latest version of iTunes on a 3-month old Mac Mini (8 gig RAM, OS 10.10.2) does not see any of the shared iTunes libraries on a MacBookPro (MBP) (OS 10.9.5) and a 14-month old Mac Mini (OS 10.9.5). And a network shared drive/media server does not appear as well. I have a Gigabite Ethernet G4 and on it, the MPB and the "old" mini I can see the various shared music libraries and NAS, but not on the new Mini.
The little house with a music note inside it that I see on the upper left corner of the iTunes 12.1 window on my MBP does not appear on iTunes 12.1 on the new Mac Mini. I have gone through all the iTunes preferences and can not find where I can turn on this feature. The new Mac Mini is on the local network and I can reach the internet successfully.
I have been using iTunes since its beginning (still have a PowerTower Pro with a working copy of SoundJam), so I am not a newbie, but this has me baffled.

May I add, that I gave full rights to the user at the Mac Mini to access and change data on the server drive for ITunes Media.

I changed my browser fill and the update does not show in the preview mode

I changed my browser fill and the update does not show in the preview mode. I saved and restarted muse but the problem is still there. Any thing else I can do? Could it be something that changed in the file?

Hello,
What did you put in the "browser fill" area, an image or a color? WIth gradient or with solid color? Also, does it show fine if you "Preview in Browser"?
Screenshots showing the Browser fill section (like this: http://screencast.com/t/RHqdVPP4) and the display in Preview mode would also be helpful.
Cheers
Parikshit

I am trying to update a chart in Pages that I created in Numbers, but the refresh button does not show up after I save the Numbers file. Thoughts?

I am trying to update a chart in Pages that I created in Numbers, but the refresh button does not show up after I save the Numbers file. Thoughts?

It is hard to exactly understand what you have done or not by you one sentence description. My thought is have you read in the Pages User Guide? Here is what it says about updating a chart in Pages:
Updating a Chart Copied from a Numbers Document
If you’ve created a chart in Numbers, you can copy it and paste it into your Pages document. After it’s been pasted into Pages, the chart remains linked to the data tables it references in Numbers. To change the chart data, open the original Numbers document and edit the data there, save the Numbers document, and then refresh the chart data in Pages.To update a chart after you’ve updated its linked Numbers table:
Select the chart on the page and click the Refresh button that appears.
Note: You must save the Numbers document before copying and pasting your chart into your Pages document and after editing the Numbers data tables that the chart references.
I hope it has helped you.

IOS 7 Calendar does not show appointments imported as VCS files in Microsoft Outlook / Exchange. Any solutions?

iOS 7 Calendar does not show appointments imported as VCS files in Microsoft Outlook / Exchange in Windows 7. I discovered this when downloading itinerary.vcs files from Delta to mark flights in my calendar. The work around I found is as follows:
Open the VCS file, this will create a Calendar entry in your Outlook,
Open the created Outlook Calendar entry, go to File -> Save As and then select to save as ICS file.
Delete original VCS-created appointment in your calendar to avoid multiple calendar.
Open the re-saved ICS file.
Appointment will now correctly synchronize with your iPhone iOS 7 calendar.
If anyone has better alternatives to this process, please help out. Hopefully, Apple will fix this with the next iOS update.

iOS 7 Calendar does not show appointments imported as VCS files in Microsoft Outlook / Exchange in Windows 7. I discovered this when downloading itinerary.vcs files from Delta to mark flights in my calendar. The work around I found is as follows:
Open the VCS file, this will create a Calendar entry in your Outlook,
Open the created Outlook Calendar entry, go to File -> Save As and then select to save as ICS file.
Delete original VCS-created appointment in your calendar to avoid multiple calendar.
Open the re-saved ICS file.
Appointment will now correctly synchronize with your iPhone iOS 7 calendar.
If anyone has better alternatives to this process, please help out. Hopefully, Apple will fix this with the next iOS update.

IPhoto does not show last import

iPhoto does not show last import. When I try to re-import photos from a desktop file it says the photos are already in the iphoto library and cannot be imported. What do I do? I've already re-installed iPhoto 09 and run updates.

Are you saying that the last import is not showing in the last import section of the source pane or is not in the Events in the library window? If you do not see the event then your camera has the wrong date - look in the last import album and find the date and then go to that date in the events - it will be there - if you want you can then slelect the photos and use the adjust time and date command to fix it - check change original files
LN

HT1498 I rented a movie and it does not show up on my apple tv but is in my video app on my phone. How can I watch it on my tv

I rented a movie and it does not show up on my apple tv but is in my video app on my phone. How can I watch it on my tv?

A movie rented on an iPhone can only be viewed on an iPhone. If you want to view on TV you need to rent directly on ATV or via computer (and stream using home-sharing)

HT1473 Sometimes when I copy a CD into iTunes all of the songs do not show y up in one album, but mutiple albums, all with the same name. Is there an easy way to get all of the songs into one album.

Sometimes when I copy a CD into iTunes all of the songs do not show y up in one album, but mutiple albums, all with the same name. Is there an easy way to get all of the songs into one album.

Generally adding a common album artist will fix things.
tt2

LOV does not show newly added data in the same session

Hi guys,
I work with JDeveloper 11g Release 2. We use Oracle ADF to develop our web app.
In a page we have a LOV (say the page name is "a"). The related data for that LOV is inserted to the db in another page ( say the page name is "b").
When new data is added in the page "b" and goes directly to the page "a" the LOV does not show newly added data. But if the user log out and log in again
LOV shows newly added data correctly.
Is there a way to show the newly added data in the same session without logging out? Please help.
Regards !
Sameera.

Add the following method in your ViewRowImpl base class:
public void refreshLOVAccessorQueries() {
    List lovs = getViewDef().getListBindingDefs();
     if (lovs != null) {
         for (Object obj : lovs) {
            getListBindingRSI((ListBindingDef)obj).getRowSet().executeQuery();
             ListBindingDef lbd = (ListBindingDef)obj;
Export that method to the Row Client interface, add him to the pageDef, and invoke in the executables section of the pageDef:
    <executables>
<invokeAction Binds="refreshLOVAccessorQueries" id="callRefreshLOVs"
RefreshCondition="#{!requestContext.postback and empty bindings.exceptionList}"/>
   </executables>

My purchase does not show on my creative cloud account but i am being billed for it

my purchase does not show on my creative cloud account but i am being billed for it

Some general information for a Cloud subscription
Log out of your Cloud account... Restart your computer... Log in to your paid Cloud account
-Sign in help http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html
-http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
-http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html
or
This is an open forum, not Adobe support... you need Adobe staff support to help
Adobe contact information - http://helpx.adobe.com/contact.html
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us"

LR4.3 does not show previously imported CR2 files (5D mark III) by trial version

LR4.3 does not show previously imported CR2 files taken using 5D mark III by trial version.
When tried to synchronize the files not show when browsing, the import window comes up. All the Jpeg files, Raw files are seen in the window. None of them are highlighted nor selectable. LR is assuming that those files are already imported but if imported they are being shown for browsing or editing

Maybe you have set a Filter in LR. Press Ctrl-L once or twice to turn it off.
Maybe you don't have "All Photographs" selected in the Catalog Panel on the left.

ITunes 10.6.1 update does not show newly imported music in viewer but files are in iTunes media folder, how to correct?

Similar Messages

Maybe you are looking for