ITunes 10.6.3 Mac running 10.7.3 not responding I have deleted iTunes and reinstall iTunes and it keeps happening I also scanned the computer for any trojans and any other possible viruses but the pc is running perfect waft do I do ? Please help me ?
I need help iTunes 10.6.3 Mac running 10.7.3 not responding I have deleted iTunes and reinstall iTunes and it keeps happening I also scanned the computer for any trojans and any other possible viruses but the pc is running perfect waft do I do ? Please help me ?
Hey thanks for replying.
Here's what I did:
First I tried the Winsock reset in the Command prompt. Nothing changed.
Next, I tried the instructions on http://http://support.apple.com/kb/TS4123. The only other program that came up on the 'Winsock Providers' tab on the program was 2 Windows Live applications, which I can do without. So I deleted all Windows Live Applications.
I did the Winsock reset in the Command Prompt again and rebooted my comp.
Unfortunately, nothing has changed. iTunes keeps freezing at various stages of the sync, then shows the candy cane-striped bar with either the words 'Finishing sync' or 'Cancelling sync', before showing the Apple logo.
Sometimes, iTunes gets to the syncing stage - "Copying # of ####" - where it will trudge through the first, second and third tracks before flashing "Copying 4 of ####" for a split second and I catch "Cancelling sync" briefly before the Apple logo appears.
Again, I've repeated the steps I mentioned in my previous post. Does ANYONE know when the new version of iTunes is set to be released?! This one is driving me INSANE, to say the least!!
Similar Messages
-
My MacPro is a dual quad core 2.8 intell processor system with 6 gig of RAM and 4 HDs. I recently upgraded the HDs from 500 gig each to 2 TB each. I did that by copying each existing hard drive to a new hard drive and then inserting the new hard drive where the copied drive had been. I followed all of the instructions for the OX system that came after copying and replacing the drive with the OX on it. Unfortunately now I can no longer use the 2 monitors that I used to use on the system. One monitor works fine, the second on is not found by the OX system and simply won't respond or receive a signal from the computer. Any ideas?
Have you tried a NVRAM / PRAM reset?
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys. -
Hi, Firefox on my desktop keeps crashing at just random moments. Sometimes not very often at all, but other times it can happen a few times within an hour.
My Desktop Window Manager also crashes regularly and the dialogue box always pops up saying its stopped working. However, this doesn't seem to effect anything.
It could be realated though, as I just had this desktop built a few weeks ago and a few times it's crashed as well as programs.
If anyone can help me fix this issue with Firefox, that would be great. Thanks in advance.Hi,
I updated the Flash plugin, but I still keep getting crashes.
I will try to disable the hardware acceleration in the Flash Player as you recommended and hopefully this will work.
Although the last crash report I got has a different problem then before,
https://crash-stats.mozilla.com/report/index/6c5d8c66-6789-4b52-94e4-61cdf2110530
Signature: BuildArgArray
If you can please offer any more advice that would be great, thanks. -
my iMovie 10.0.3 won't open on my mac. I have tried all the tricks I can think of and it still won't open.
Any thought?
thanks..Have a look at my posts here and see if it helps:
https://discussions.apple.com/thread/6271393?tstart=0
Geoff. -
I'm running out of hd space on my MBP with Mavericks OS. How do I move my Photoshop 5 app off the computer for more space, and store the PS5 app on DVD or on my backup hd for a future reinstall on my next Mac with larger hd?
Thanksslaglejrp,
perhaps it would be less expensive to just install a new disk with a larger capacity on your current MacBook Pro, rather than plan on buying a new Mac with a larger disk? Once your current disk has been cloned to the new disk, and the new disk has been installed into your MacBook Pro, that would allow you to keep Photoshop 5 on your current MacBook Pro. -
I'm running windows7 and I'm trying to connect my iPhone4 and iPod touch2 to itunes. I've installed the latest version of iTunes, and updated my iPhone's driver. When I connect either device to iTunes I get the message "you need to uninstall and reinstall itunes". I've done this multiple times with the same results. This is very frustrating, HELP!!!
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2 -
I am having problems with video and high content webpages freezing. I am also getting pixel lines across my webpages. Maybe two or three lines. I was running os 10.4 but I just up graded to 10.6 the other day. I have 2GB of RAM.
Exactlly which model iMac do you have?
see > How to identify iMac models
Unfortunately that is not all that uncommon for the Early Intel iMac's given there age and the fact that the air intakes are probably choked with dust. Then add the extra heat caused by running a more intense OS X which is causing it to run a little warmer than normal and putting extra stress on the graphic and display components.
My 6½ year old 17" Early 2006 Core Duo w/2GB of RAM is also running 10.6.8 and is also starting to get a single line that (knock on wood) goes away after a few minutes, while many others started getting permanent ones after 2 or 3 years. One thing that I think has helped, is that about every 3 or 4 months I shutdown and vigorously vacuum out the bottom grill work and small vent under the stand to keep it running cool.
On that note: unfortunately I can only suggest that you clean your intake vents and hope that no permanent or irreversible damage has been done. -
I have just updated my 4s to IOS7. and now my battery discharge is significantly increase. With my Iphone fully charged, the battery run out within 6 hours without using the phone at all. Would it be possible to get the IOS 6.1.3 back to my 4S?
Hi, thanks for the suggestion. I have tried as you suggested, and when opening the "purchased" apps some have the icloud logo next to them, but I only have "OPEN" against "Find My iPhone". When opening it up, it goes through the same routine; needs to be updated before proceeding, and wouldn't update because I don't have IOS8.
Anything else I could try, or am I doomed!
All of your help is much appreciated, thanks -
I am having a problen syncing my 80gb Ipod to my library. Its been syncing for over 24 hours. I have reset the Ipod and reinstalled Itunes. I am running windows 7 ,6gb of ram.Nothing seem to help. It take 2 miniutes to copy one song(very slow)
UPDATE:
Ok I am offically an idiot.......messed about a bit more and found this post very very helpful:
http://discussions.apple.com/thread.jspa?threadID=396267&tstart=15
Managed to get my ipod restored to factory settings (yay!) However then it was being recognised in windows but not in itunes.......to solve this I referred back to Apples excellent troubleshooting guide. Installed the lastest version of itunes.....and there we go! We have a working ipod! I am so delighted and no longer on the verge of tears! (I so thought I had completely banjaxed my brand new ipod!)
Dell Windows XP -
I would like to know what i need to do to get the program to run again. i have not been able to locate a way to reinstall the program it says i need to have to run the program
Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99436) -
I can't connect to the itunes store. I've tried everything in the articles for trouble shooting and nothing works. My library comes up, my ipod syncs, and I get no alert messages. I'm running Vista.
I can't connect to the itunes store. I've tried everything in the articles for trouble shooting and nothing works. My library comes up, my ipod syncs, and I get no alert messages. I'm running Vista.
-
I run Windows 8.1. I have received the result after several attempts uninstalling and reinstalling iTunes, "ITunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 127)" What can I do? to solve the problem. Tried to clean the windows registry, no change. Very frustrating. Any advice is much appeciated.
Thanks.Try the following user tip:
Troubleshooting issues with iTunes for Windows updates -
I recently tried to update iTunes to 11.1, and am now getting an error message "This application has failed to start because MSVCR80.dll was not found. Reinstalling the application may fix this problem." I have uninstalled and reinstalled iTunes several times with no success. I am running Windows XP Svc Pack 3. Help please.
Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99753) -
Running a mid 2009 iMac on 10.7.5, 3 gb memory, 320 gb hd.
Suddenly the computer stoped reading DVDs and the only time I can read a CD is if I restart. Quite often when I insert a CD it gets stuck and I cannot get it out until I restart and it shows up on the desktop where I can then eject it.
I have checked and double checked the finder prefs and all looks normal showing a check mark on CDs,DVDs etc. (the ones I want to show up on the desktop)
I have reset the PEAM, repaired permissions with both the disk utility on the computer and the disk utility when I start up in the Recovery Disk. I did notice that sometimes the permission repeat the same correction several times before it moves on, and sometimes it doesn’t. I have Windows installed on a partition but I keep it unmounted until it is needed for my wife’s work. The dock seems to be just fine and all the apps seems to run just fine. When I insert a photo CD iPhoto does not open but when I insert a music CD iTunes does open.
Also, most every time I open iPhoto it takes a long time(sometimes as long as 2 minutes) for it to load.
Sometimes my Mail (Mail 5.3) does not post new mail but most of the time it does.
Once and a while it seems like the computer slows way down but then it seems ok ten minutes later.
All of these ‘things’ seemed to have happen suddenly and I have not downloaded anything from the internet in some time.
Of course the warranty and extended warranty are both no longer in effect having had this computer for more than three years.
I am running Java and Adobe Player because some of the sites I go to a lot require both.I believe that insufficient RAM may be the source of some of your problems. If you have a RAM of somewhere 4 to 8GB, you will experience smoother computing. 3GB doesn't seem right, so you might want to learn more by going to this site:
http://www.crucial.com/store/drammemory.aspx
I don't know what know what's happening with your optical drive, but it seems you use your drive quite a bit. In that case, look into a lens cleaner for your machine. It's inexpensive, works quite well.
I hope you'll post here with your results! -
hi my itunes crashes everytime i try to excess the itunes store,it seems to work fine until that point,ive uninstalled and reinstalled itunes and also tried it with my fire wall off but all to no avail. i am using a new computer which isnt authorized yet if that makes any difference. any help would be greatly appreciated
Windows 8 or Windows RT? iTunes won't run on Windows RT. It should run on Windows 8. Use the appropriate installer from an account with administrator privileges.
Windows System Requirements
PC with a 1GHz Intel or AMD processor and 512MB of RAM
Windows XP Service Pack 2 or later, 32-bit editions of Windows Vista, Windows 7, or Windows 8
64-bit editions of Windows Vista, Windows 7, or Windows 8 require the iTunes 64-bit installer
400MB of available disk space
Broadband Internet connection to use the iTunes Store
tt2
Maybe you are looking for
-
Updated to 2.0, now my purchased music won't play
I can't seem to do a search since the search function for some reason has gone from the forums. I'd like to know if anyone has been able to get their purchased music to play. It will play fine on the computer but not on the iPod Touch. Information is
-
Using an Animated GIF/JPEGs Effectively
I have an animated GIF in an applet with around 200 frames, moving at a speed of 6 frames per second. However, when just drawing it in paint(), it looks extremely messy with the flashing. Then I tried another tack, and exported the gif as 200 jpeg fi
-
Installing Adobe Reader and got Error 1303
I was trying to install Adobe Reader and I got this error 1303. "Error 1303, The installer has insufficient privileges to access this directory: C:\Program Files (x86)\Adobe\Reader 9.0\Resource\Font\PFM. The installation cannot continue. Log on as an
-
Button to play 4 symbols glitchy- plays IN simultaneously, plays OUT sequentially. Why?
I have 4 symbols, each simply a variant in the color and text. All 4 symbols are built on the same animation, but are independent symbols. Each symbol itself is composed of 3-4 symbols. I have combined these 4 into a master symbol. I have created a
-
Program GFW_PROG_TIME_AXIS convert to "true" line chart example.
Please disregard...took two days but I have succesful GFW line chart... I found a single customizing method call in error...now wiping egg from face.... )