ITunes 10.6 closes itself automatically on windows 7

After the latest update of iTunes, I can not open it. It is immediately closed by windows with the error:
`iTunes has stopped working
A problem caused the program to stop working correctly.Windows will close the program and notify you if a solution is available`
I uninstalled and re-installed iTunes many many times but it didn`t work .

Hello,
I've been unable to use my iTunes ever since upgrading to v10.6 Today with the new roll out of v10.6.1 I ran the fresh update hoping the issue would be resolved... After the update, Same CRASH issue at opening...  I was able to FIX this on my own after messing around with an extremely confusing support article. http://support.apple.com/kb/TS1717
Try doing this troubleshoot and see if it helps you, it worked great for me! After I moved the first folder location listed below, my iTunes was fixed! I have since deleted that folder I had moved earlier and iTunes it's still working like a charm. I've also re-wrote the instructions for you more clearly then apple did.
Remove iTunes Preference files
Some of the files that iTunes uses to store it's settings and preferences may be unusable and cause issues.  iTunes has two folders where it's preferences are saved. Move one of the folders to another folder location ie. (my documents, etc.) and try opening and running itunes to test.  This is to see if the issue persists after removing these files. If the issue does not persist, simply delete the moved folder and enjoy using iTunes! However, If the issue still persists, move the folder back to where it was originally and try the same process again, this time moving the second folder. The location for the two preference folders are:
C:\Users\username\AppData\Local\Apple Computer\iTunes
C:\Users\username\AppData\Roaming\Apple Computer\iTunes
Really hope this helps you!

Similar Messages

  • Adobe Reader closes itself automatically

    I am using Windows 8.1, Word 2010 and Adobe Reader X. Any time a Word document is opene at the same time the Adobe reader closes itself automatically once the mouse cursor hits the Reader document. What can I do?

    Hi,
    I would say you are definitely coming up against memory restrictions. There are a couple of posts by John Brinkman that I would recommend.
    First I would look at why the form is 6Mb and see if you can reduce this down. For example, select fonts that are already in Reader (like Myriad Pro) and then deselect Embed Fonts in the File > Form Properties > Save Options. Also do not embed images into the form. See:
    http://blogs.adobe.com/formfeed/2010/02/big_and_complex_forms.html.
    http://blogs.adobe.com/formfeed/2010/09/xdp-size-matters.html.
    http://blogs.adobe.com/formfeed/2009/11/linked_vs_embedded_template_im.html.
    Next look at your script. You mention loops, so check is your script efficient. For example, use xfa.resolveNodes() once outside of the loop, instead of xfa.resolveNode() inside the loop. Make sure that variables are declared. See:
    http://blogs.adobe.com/formfeed/2011/10/script-performance-exercise.html.
    http://assure.ly/kUP02y.
    Also check for any script that you have in events that fire frequently, like layout:ready event and comment these out. See.
    http://assure.ly/nB0Bvz.
    The dataset seems very large at 2Mb. Does this include image data? It may be that the user is interacting with the form, while it is still trying to process the XML and the loops.
    Hope that helps,
    Niall

  • SAP application close itself automatically

    Hi All,
    Does anyone encountered this, SAP automatically shut down itself when the specific user creating DO copy from SO. Then choosing 'Use Doc and Row Echange Rate from Base Doc' or 'Use Current Exchange Rate from the Exchange Rate Table' then selecting 'Customize' will make the application to shut down automatically. We tried to login to other PC and doing same scenario, the problem will also encounter on that PC. We tried to login using other user id and re-do the same scenario, and we didn't experienced the same problem. Only particular user id = 'sharon' having this problem.
    thanks and regards,
    vin

    Hi
    Let me share the your SAP Version and current patches level, Check the below link and get the latest patch and upgrade your system in to higher patch level.
    https://websmp207.sap-ag.de/~form/handler?_APP=00200682500000001943&_EVENT=DISPHIER&HEADER=N&FUNCTIONBAR=N&EVENT=TREE&TMPL=INTRO_SWDC_SP_SMB&V=MAINT
    Regards
    Shamseer

  • When I try to open any video or podcats in iTunes U, it closes itself without any error message

    What can I do ?

    Greetings;
    I would suggest that you try syncing your iPad and updating your software (version 4.3.5 is the latest version). It's been my experience that updates resolve a number of odd behaviors with apps.  Hope this helps.  All the best...
    Syd Rodocker
    Administrator/iTunes U
    Tennessee State Department of Education
    [email protected]
    http://itunes.apple.com/us/institution/tennessee-state-department/id382661355

  • Itunes closes itself after i open it.

    On my home PC computer I try to open itunes and it closes itself then tells me it will search for a solution. Never does!
    HELP!!!???

    Hey RDears,
    Thanks for the question. I understand that you are experiencing issues with iTunes for Windows. The following resource may provide a solution:
    iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
    http://support.apple.com/kb/TS1717
    Thanks,
    Matt M.

  • ITunes closes itself

    I have been using iTunes for awhile now and regularly update to the newest version. Within the last few weeks, I have had issues with iTunes. Upon opening the software, more than 70% of the time it will automatically close itself even if it is being used to play a song. It will still appear in the system tray in the bottom right hand corner. When I put the mouse over it is no longer in the tray. It doesn't happen all the time. I have uninstalled and reinstalled the software and the issue is still present.
    Is there a way to remove it from the registry and start fresh? I would very much like to use the software, but this is getting ridiculous. I have the software on three machines and this is the only one with the issue.
    Thanks in advance.
      Windows XP Pro  

    There's a link in that article to another article about updating Windows drivers:
    http://support.apple.com/kb/HT1768?viewlocale=en_US
    wiki on ready boost

  • Videochat window closes itself during the chat

    I have iChat version 3.1.8 and I still use Mac OS X 10.4.10.
    I wanted to have a videochat with my mother (she uses AIM Messenger on Win XP), but it didn't work.
    The window of the videochat closes itself after less than 5 seconds. Sometimes it's very fast (before I see my mum, sometimes it's after 5 seconds when we could say a half sentence.
    I tried to restart the computer, but the problem is still there.
    The last days I also had trouble with my computer: slow start-up, blocking (even apple-alt-esc didn't work any more) and troubles with iTunes when I click it in my dock, it doesn't jump, it doesn't open, but there is the little black arrow wich means it's activated. Could this have something to do with it?

    Hi
    Do you get an error message with the closing of iCHat?
    Have you done the following?
    iChat>Preferences>Video>Bandwidth limit: None
    System Preferences>Quicktime>Streaming>Streaming speed: 1.5Mbps T1/Intranet/LAN (don't use Automatic)
    Restart iChat
    Has the PC end done its settings up? See http://www.ralphjohnsuk.dsl.pipex.com/page12.html#_Service
    Steve

  • Acrobat XI Pro automatically closes itself with no messages etc. after few seconds

    Greetings all,
    I don't know why but my Acrobat XI Pro (11.0.0) automatically closes itself (with no warning, no messages etc.) after few seconds. I installed the AXI as a part of the CS6 Master Collection on my Windows 8 (x64) laptop. Just as suggested at some other posts in the forum:
    I checked the "security settings (enhanced)" tab but the protected view option is already off.
    I searched for the eula.exe under the "Program Files (x86)\Adobe\Acrobat 11.0" folder but there is no eula.exe. May it be not present because I installed it as a part of CS6 Master Coll. package?
    I am using Eset Endpoint Antivirus as a third party Anti Virus Software.
    The problem occurs when:
    I open up a pdf file from outlook etc.
    I manually open a pdf file from windows explorer
    I open adobe acrobat with no file to view
    As I mentioned above, I see no error messages or warnings during the closing down. It acts as if I clicked the close button on the top right corner. I know that there are a lot of posts in the forum about this issue, but none of them helped me to solve my problem. I would be glad if you can help me with this problem.
    Thanks,

    Hey i was having this issue also with Adobe Acrobat pro... it only seemed to be affecting one program that produced PDF output automatically. When the processes finished the PDF is supposed to be displayed and instead it would rapidly flash across the screen and close. THen i would have to hunt for the PDF to review its content. I tried a couple of things like deleting my preferences for acrobat C:\Users\[your user name]\AppData\Local\Adobe\Acrobat\10.0. You might have to show hidden files. In the explorer window select Organize-> Folder and search options-> once that opens view -> check show hidden files, folders and drives. then navigate that path above. Make sure adobe is closed then delete everything in there or move it off to another folder if your worried it will break it further.
    That did not fix the problem though. I opened the application and ran my process again same results (adobe closes pdf auttmagically). so i opened adobe acrobat and navigated to Edit -> Preferences -> look under the General tab and click the select default PDF handler and that seemed to fix my problem. I also disabled the enhanced security look further down in that list under security enhanced. then a reboot so it is possible that the enhance security setting was the cause i think i will play with that for a minute to see if it was but i think my issue was the default handling. good luck

  • ITunes closes itself when trying to play TV shows

    When I try to play a TV show, the window goes green and then iTunes stops working and closes itself. Songs all play fine, it seems to be just TV shows. Is there any reason for this? How do I stop it?

    There's a link in that article to another article about updating Windows drivers:
    http://support.apple.com/kb/HT1768?viewlocale=en_US
    wiki on ready boost

  • Since installing 10.5, Itunes will no longer open automatically when I connect my Iphone or insert a CD.  Nor will it, when I insert a CD, recognize the CD unless I close Itunes and open it again.  Any ideas?

    Since installing 10.5, Itunes will no longer open automatically when I connect my Iphone or insert a CD.  Nor will it, when I insert a CD, recognize the CD unless I close Itunes and open it again.  Any ideas?

    Purchase the Snow Leopard install DVD from Apple to install 10.6
    After that uodate to 10.6.8 using Software Update

  • Itunes will no longer work on my Windows 8 PC. When I attempt to start the program a message says: A problem caused the program to stop working correctly.  Windows will close the program and notify you if a solution is available.

    Itunes will no longer work on my Windows 8 PC. When I attempt to start the program a message says: A problem caused the program to stop working correctly.  Windows will close the program and notify you if a solution is available.  I have tried to uninstall iTunes but the Windows uninstaller will not delete the program I get a message that says: A network error occurred while attempting to read file: C:\Windows|Installer|iTunes.msi.  How do I get iTunes to work again?

    Whentrying to uninstall iTunes (the first program that must be uninstalled per the instructions) I get a message:  A network error occurred while attempting to read file: C:\Windows|Installer|iTunes.msi. I can't even uninstall iTunes?
    (1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page).
    http://majorgeeks.com/download.php?det=4459
    Here's a screenshot showing the particular links on the page that you should be clicking:
    After clicking one of the circled links, you should be taken to another page, and after a few seconds you should see a download dialog appear for the msicuu2.exe file. Here's a screenshot of what it looks like for me in Firefox:
    Choose to Save the file. If the dialog box does not appear for you, click the link on the page that says "CLICK HERE IF IT DOES NOT". Here's a screenshot of the page with the relevant link circled:
    When the dialog appears, choose to save the file.
    (2) Go to the Downloads area for your Web browser. Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
    (3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
    (4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
    (5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

  • How do I make it so that itunes doesn't start automatically when windows starts?

    How do I make it so that itunes doesn't start automatically when windows starts?

    http://support.apple.com/kb/HT5449
    http://support.apple.com/kb/PH11443
    http://support.apple.com/kb/PH11428

  • I have multiple iPhoto libraries and when I selecting which library to view (hold down 'option' key and launch iPhoto from the dock) it automatically closes another open apps window eg. Chome, Word. 1 app closes every time I launch iPhoto this way.

    I have multiple iPhoto libraries on my Macbook Air 10.7.5 and when I am selecting which library to view (hold down 'option' key and launch iPhoto from the dock) it automatically closes another open application window eg. Chome, Word. 1 app closes every time I launch iPhoto this way.

    If you're pushing Option at the exact moment you're clicking the Dock icon, it's supposed to do that. Wait until just after clicking it.
    (112342)

  • Itunes 7  closes itself when I hook up my ipod. Now I can't restore it.

    I just downloaded itunes 7 so that i could restore my ipod (the thing wont play songs, it just flips through all the tracks when i push play). Itunes will play all my music, but when i hook my ipod up to the computer, and then try to do anythin in itunes, it closes itself. I just want it to stay open! HELP!

    Hi!
    What type of iPod do you have?
    Have you run Software Update to make sure you have the latest versions of the system software, Quicktime in particular?
    eMac   Mac OS X (10.4.8)  

  • The reader won't open. It will automatically close itself

    It started when the adobe reader got updated. When i click open the adobe reader, a grey screen pops up and it just closes itself. I tried re-downloading, and different versions too, but it's always the same Please, if someone knows what's up, help! (I use a pc, not a mac)

    Ah, I see what's going on. Thank you for adding your troubleshooting information. It helped narrow it down.
    You should always pay attention when installing software because often, a software installer includes optional installs, such as this adware. Be very careful what you agree to install.<br>
    Adware gets on your computer after you have installed a freeware software (video recording/streaming, download-managers or PDF creators) that had bundled into their installation this browser hijacker.
    You can use the below steps to revert back to adware-less Firefox.
    1) <u>Reset Prefs</u>
    *Navigate to '''about:config''' in your Address Bar
    *Press the "I'll be careful, I promise!" button to proceed
    *Search for <b>trovi</b> and reset all prefs that pull up by right clicking > Reset
    2) Remove any programs that you don't recognize or remember installing from your Control Panel (Start > Control Panel > Uninstall a Program)
    3) Remove any extensions that you don't recognize or remember installing from Firefox.
    *<b>Firefox 29 and above:</b>(Press the menu button ([[Image:new fx menu]] > Add-ons > Extensions)
    *<b>Firefox 28 and below:</b>(Go to the orange Firefox button > Add-ons > Extensions)
    4) Download ADW Cleaner to wipe out any remnants of the adware.
    *http://www.bleepingcomputer.com/download/adwcleaner/
    5) it looks like user.js is currently active in Firefox. The user.js file is only present if you or other software has created this file and normally it wouldn't be there.
    You can delete a possible user.js file and delete also the prefs.js file to reset all prefs to the default value including prefs set via user.js and prefs that are no longer supported in the current Firefox release. You can get to the profile folder below:
    *Help > Troubleshooting Information > Profile Directory > Show Folder
    or
    *Go to '''about:support''' and click Show Folder next to Profile Directory.

Maybe you are looking for

  • System architecture check failed while adding a New Node in RAC

    Hi Friends, Environment:SUN Solris 10 Cluster Version:10.2.0.3 database Version:10.2.0.3.0 Due to H/W failure one of our RAC node(prod1) got formatted. We have deleted the node(prod1) from RAC successfully. But When i am again trying to add the node

  • Internet Access Not Available on WAP Guest Network

    Hello, We have the RV180W router and the WAP321 access point in our business. We want to broadcast two SSIDs from both locations: the office SSID, which shares routing to LAN traffic, and a guest SSID. The office computers are attached via ethernet t

  • Items in shared mailbox are not visible when using cached mode in Outlook 2013

    Hi all, When using Outlook 2013 working with the users own mailbox works great, but when a user connects an additional mailbox to its mailbox, this mailbox is shown correctly, but it contains no items. The folder list is shown correctly, but there ar

  • Insufficient Data for an Image Acrobat Pro 11.0.6 - Windows 8.1

    We have recently upgraded several users in our office to Windows 8.1.  They are running Acrobat Pro 11.0.6, which they had previously been running Windows 7 without issue. Now, in Windows 8, they will have a PDF file open and pages in it start to go

  • Macbook Pro 15 inch

    I also have one more concern never owned a Mac and I've been playing Diablo 3 and Ive never had a laptop run so hot up in the left side up by the screen it gets hot to the touch is this a normal thing cause it seems like its going to fry itself? It h