Itunes 10 and Quick Time Installation on Windows 7

I have installed iTunes 10.6.3.25 on a Windws 7 Operating system and I had what appears to be the same problems of not being able to intall the software and I followed the trobleshooting guide on:
http://support.apple.com/kb/HT1926
I have now been able to install the software in the automatically selected folder of C:\Program Files(x86) however I am still expereincing the following problems:
- I was unable to launch itunes however I launched it in Safe Mode and the following messages are received in order:
"iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly"
The only option to select at this point is "OK" once selected iTunes then opens and then the the next message is received:
"iTunes: iTunes.exe - Entry Point Not Found
The procedure entry point I_NetNameCanonicalize could not be located in the dynamic link library NETAPI32.dll"
The only option to select at this point is "OK" once selected iTunes finishes opening.
Further I note that following the initial installation of iTunes Quick Time Player did not automatically install so I downloaded from http://www.apple.com/quicktime/download/ QuickTime 7.7.2. Once downloaded I attempted to install the executable file (as administrator) and after the standard message of Windows 7 appears as follows:
"Do you want to allow the following program to make changes to this computer?" (Program name QuickTime....etc)
I select "Yes"
Then a dialog box appears very breifly that normally comes up when installing new software, however before the dialog box populates with any information it dissapears and the installation process stops.
So once iTunes has finshed opening I attempt to open one of the movies in my library and as expected the following message appears:
"This movie requires Quick Time, which is not included in this version of iTunes.
To play this movie, instal Quick Time."
Assistance would be appreciated.

I got it to work now ...
-Unistall the current iTunes on your computer.
- go to http://support.apple.com/kb/DL1427
-Go all the way down the page and download the iTunes through the given link
----------Download for iTunes 10.4.1 for Windows  (64 - bit) here:  iTunes 10.4.1 for Windows 64-bit.
-Once downloaded if a message window pops up with a message "the file itunes library.itl cannot be read"
Just go to My documents-> Music folder -> iTunes folder -> delete library.itl if existing or add it if it doesn't exist.
it worked for me so I believe that it should
Good luck

Similar Messages

  • Initial install of itunes and quick time locked up Windows 2000 @ restart

    I installed itunes and quicktime from the disc provided. After install the installer asked to restart the computer and I clicked yes. It has not booted since. Windows 2000 Pro locks up about 75% through process. I did hear the speakers activate then nothing. I have attempted a hard boot and restart in safe mode without success. My emergency disk did not work. Where should I go next?

    just checking something before we proceed ... did you have an copy of the Adaptec version of Easy CD Creator 4.0.x installed on that PC?

  • ITunes not running after Safari and Quick Time update

    HELP NEEDED!!After updating to the latest version of Safari and Quick Time, i got this error message the next time I started my computer:
    "AppSyncNotifier.exe: The program can't start because CoreCoundation.dll is missing from your computer. Try reinstalling the program to fix this problem."
    I tried to open iTunes but I can't. I tried to uninstall so I can reinstall but it I got another error message that said I do not have the rights to uninstall, etc. I am the only user of this computer and I have admin rights. This PC used to run on vista but I recently upgraded to Windows 7(x64) and I encoutered the same problem - i could not uninstall/reinstall iTunes because "I do not have permission"
    After upgrading to Windows 7 iTunes was running okay until the Safari and Quick Time update.
    I need to sync my iPhone and iPod but without iTunes I can't!!!
    PLEASE HELP!!! PLEASE, PLEASE, OH PLEASE!!!!

    b noir wrote:
    What a strange collation of errors. Taken at face value, each of the three suggests a different problem. Working on an Occam's razor sort of principle, that one underlying problem is going to be more likely than a perfect storm of three different problems at once, I think we'd better try checking on troubles with administrative privileges first.
    Let's try doing a "run as administrator" on an iTunes uninstall first.
    Download and save a fresh copy of the itunes installer to your desktop.
    http://www.apple.com/itunes/download/
    Now right-click on the iTunes64Setup.exe file you downloaded and select "Run as administrator".
    Since you've already got that version of iTunes installed, you should eventually get to a dialog asking you to repair or remove iTunes. Select Remove.
    Does that go through without the "Windows Installer" message?
    If so, reboot the PC and then try another "Run as administrator" of your iTunes64Setup.exe. Does Apple Application Support get installed for you properly this time?
    Thanks again b noir. Unfortunately, this suggestion did not work. When I did what you said, there was no option to "remove". I see the iTunes thing on my control panel-programs window, but it's no longer in the program (x86) folder on the c:/drive. iTunes on my computer is like gum stuck to my shoe. same goes for bonjour. Please be patient some more. Do you have any more suggestions?? I'm planning to get me an iPad but if I can't get iTunes to run properly on my computer I'm having second thoughts about it now.
    Thanks!

  • ITunes and Quick Time upgrade 9.0.2 error downloading and installing

    Hi,
    This morning I recived notification that there is a new update for iTunes and Quick Time. While downloading and installing this upgrade 9.0.2, I received the following error:
    An error occurred during the installation of assembly "Microsoft.VC80.CRT, version= "8.0.50727.4053" type="win32", publicKey Token="1fc8b3b9a1e18e3b", process or Architecture="x86"', please refer to Help and Support for more information. HRESULT: 0x800736B3.
    What the heck does that mean???

    I received the same error and spent roughly an hour and a half troubleshooting with the Apple Customer Support before I was told that it was a Windows or Lenovo manufacturer issue -- something to do with a registry key -- and that this was outside the realm of Apple Customer Support.
    If you are able to resolve it, I would be interested in knowing how.

  • I installed itunes and quick time  but when I try to open itunes I get a message that reads "quicktime failed to initialize (error -2096)"

    I installed itunes and quick time  but when I try to open itunes I get a message that reads "quicktime failed to initialize (error -2096).  I have removed both itunes and quicktime from my computer and re-installed them and I still get the same message.  What do I do to get itunes to work?

    That one is often a compatibility mode problem. Try the following document, only be sure that none of the boxes in the compatibility mode tab are checked (not just the compatibility mode box itself):
    iTunes for Windows: How to turn off Compatibility Mode

  • Can't play HD items on iTunes and Quick Time

    Hi everyone,
    I think I went through all the posts I could find on the subject. If I missed the solution, please forgive me. First time around here.
    Here's the problem:
    Whenever I open a tv show or movie I purchased on iTunes in HD mode, the audio will play just fine. However, the visual will consist of yellow, magenta and green colors and nothing else. Much like having the wrong codec installed. (Note: When the recent Mountain Lion update and iTunes update came out the vidoes played fine - until I rebooted.) All videos worked just fine on my old iMac. I should also note that VLC will show a progress bar, but neither play video nor audio.
    What lead to it:
    I recently got a new iMac and migrated everything from my old iMac to the new one. Everything went just fine, except for the problem mentioned above.
    What I tried up to now:
    - switching to SD (works - but doesn't really solve the problem, does it)
    - creating a new user account without any apps installed on it (still get the same result)
    - rebooting several times, of course
    - finger gymnastics with P+R+cmd+ctrl at start-up
    Basic system:
    27" (mid 2011) iMac, 3.4 GHz Intel Core i7, 16 GB DDR3 RAM, AMD Radeon HD 6970M, OS X 10.8.2, iTunes 10.7, Quick Time 10.2
    Hope one of you guys can think of a solution to this. I'm all out of ideas.

    http://www.dslreports.com/forum/r28318858-VUDU-no-longer-supported-by-FIOS~start=20 There are some suggestions and  good insights in this thread
    If a forum member gives an answer you like, please give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem. Thanks !!!
    http://forums.verizon.com/t5/Verizon-net-Email/Fix-for-Missing-Inbox-sent-folders-etc-with-Internet-Explorer-11/m-p/647399

  • HT1386 when i connected my iphone 5s to itunes for the first time then a window appered saying your device timed out. whats happening and how do i connect my iphone?

    when i connected my iphone 5s to itunes for the first time then a window appered saying your device timed out. whats happening and how do i connect my iphone

    Hello Hema2003,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    iOS: Troubleshooting USB connection
    http://support.apple.com/kb/TS1286
    Best of luck,
    Mario

  • I can't play movie downloads.  I've tried opening them with Windows Media Player, i-tunes, and Quick time but they don't work.

    I can't play i-tunes downloaded movies.  I've tried opening them with Windows Media Player, i-tunes, and quick time.  Nothing works.

    If after you download the movie, you navigate away and do something else with your Apple TV the content you have downloaded will be overwritten and you'll need to download it again. It's a pain in the neck for many who have slow downloads but it's something that comes with using volatile memory rather than a hard drive for storage.
    Perhaps you're not doing this, but I thought it worth mentioning.

  • Error in Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

    Hello Everyone,
    I am a regular user of I-tunes but recently i dont know why but I got some error in Launching I-tunes. So as recomonded by "Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7" section. I started removing the products. But after removing Quick time, I tried to remove Apple Software Update but while uninstalling it gave error that "There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor." and the uninstall rollbacks.
    Please send me a feasible solution to this problem.
    Thank You.

    Uninstalling the iCloud control panel should allow you to do that folder deletion.

  • Computer shuts down when itunes store or quick time tries to open

    I recently downloaded the latest version of itunes and quick time. when I try to go to the itunes store, try to use quick time or if a music video tries to load onto the itunes library from videora ipod converter, the computer shuts down. It happens every time. can anyone help.

    iTunes will not download, but gives me the error code " not a 32bid win program"   I am running a 64 bit system and have tried all the fixes that are listed.
    Doublechecking. In the course of your troubleshooting to date have you worked through the following document?
    iTunes: Windows reports that "iTunesSetup.exe is not a valid Win32 application"

  • Quick Time Pro in Windows 7

    I have quick time pro 7 but use it in Windows not Mac.  I can't find a way to play a .wma file in quick time pro.  All I can see online is codec software to allow wma files to play in quick time if you have a mac.  This doesn't help if you are trying to use quick time pro with windows. 
    I have a movie I created in windows live movie maker and want to play it in quick time pro or more specifically import it so I can export it to a m4v file to upload the video on my iphone 4s.   The video orginated from my iphone 4 as mov but I found it much easier to edit in movie maker over quick time pro but now can't save the file as mpeg4 or m4v in movie maker so I need to be able to open the save wma in quicktime pro.

    The Windows version of QuickTime Player can't open Windows Media Player formats.
    The only reason the Mac version uses QuickTime for WMP files is because of additional third party software.

  • Quick Time Pro for Windows

    I’ve got a digital camera which uses Quick Time (for Windows) to play back ‘movies’ I’ve recorded on it.
    If I upgrade to Quick Time Pro for Windows will I be able to convert and export the Quick Time files to a format that my DVD players can recognize and play? If so, what is this format?
      Windows XP  

    will I be able to convert and export the Quick Time files to a format that my DVD players can recognize and play?
    Sorry but no. DVD players require movies to be in MPEG-2, which QuickTime on Windows cannot export. You'll need to find a Windows-based video DVD creation application to be able to create disks a DVD player can handle. I can't make any recommendations, but perhaps someone else here can, or you can search the web for something like "Windows video DVD create".

  • HT5409 I asked if AVCHD files can be played on Mac and the support site says to simply click on the icon and quick time will play it. A big lie. Just say it won't support the file type and tell us what apps to get.

    I asked if AVCHD files can be played on Mac and the support site says to simply click on the icon and quick time will play it. A big lie. Just say it won't support the file type and tell us what apps to get. anybody?

    I also had issues opening AVCHD files on case-sensitive filesystems.
    You can try these steps to solve the issue:
    Right click on the AVCHD file and select 'Show Package Contents'
    Right click on the BDMV file and select 'Show Package Contents'
    Rename index.bdm to INDEX.BDM (it seems that all files in the BDMV folder should be in UPPERCASE for Quicktime to open the AVCHD file).
    Go back twice and try again to double-click on the AVCHD file (Quicktime should open a window showing the multiple clips, as expected).

  • HT2305 ITunes does not accept the installation on Windows 7

    ITunes does not accept the installation on Windows 7 , I finished downloading itunes setup > run > ..... > next > install > ............................ > rolling back action and no i tunes in my PC , itunes won't help my iphone any more

    yes, i know that the iphones are ok. its impossible that all three are damaged...
    But i want to know, its itunes fault, or an software from me. I installed the 2 windows 7 computers self (last week complete new). The third is an dell computer with vista 64, dunno what software is on it.
    here is an complete list, i installed only essential software:
    windows 7 64bit
    newest graphic board drivers (pc1: ati, pc2: nvidia)
    newest audio drivers (xfi and asus sound sonar)
    newest chipset drivers (intel x58 INFallOS_9.1.2.1007PV)
    newest intel storage controll drivers (STORallOS_9.6.0.1014PV)
    logitech setpoint 6.15 64bit
    all windows updates
    Firefox
    Thunderbird
    cdburnerXP
    Mumble
    Teamspeak 2+3
    skype
    Video Player (PC1: MPC classic, PC2: VLC)
    Audio player (PC1: winamp lite, PC2: aimp)
    foxit pdf reader
    direct x9
    7zip
    avast! antivir
    and latest itunes 64bit
    and some games
    i downloaded all software new last week, but it didnt help.

  • Upgrading iTunes does affect Quick Time pro?

    From a newbie: I installed Logic Studio 8 and together came also Quick time PRO. If I'm upgrading iTunes, normally also Quick Time is upgraded. Do I risk to loose the pro edition and to come back to Quick Time Player only?
    Thank you!
    Paolo

    no it shouldn't

Maybe you are looking for

  • Deleting a single field from existing WebADI Layout (Update)

    Hi, We need to amend our custom WebADI integrator's layout by removing a field from the layout. However, in Desktop Integration - "Define Layout" - we do not have any option to delete a field (options are - Move Up/down, Read only, width,Frozen pane)

  • Making sure you can't use back button to go back to a secure page

    I am wondering how I can go about ensuring that the user of my application can not use the back button to go back to a secure page after leaving it. What is the easiest way to implement this added security? Thank you.

  • Maximizing JFrame on Linux OS

    This is the same topic as in this thread http://forum.java.sun.com/thread.jspa?threadID=734904&tstart=0 thanks

  • NoKia N8 Static Charge discharge, sweating of the ...

    I am currently experiencing a static charge discharge whenever i use the phone in my car and step out. does any one face similar problem? what is the cause and solution? Also there is extensive sweating of the screen due to humid climatic conditions

  • Out of Category

    I should direct this question to Apple, but perhaps someone can help me. Is it possible to trade-in an older model, in this case, an iBook G4, for a MacBook and pay the difference? I don't know if Apple offers a non-educational trade-in program. Than