ITunes 11 media controls are not working on Windows 8.1 and more.

The iTunes team might be distracted or something...

GUYS I FOUND THE FIX FOR THIS AND IT ACTUALLY WORKS YAY!!
Copy QTMovieWin.dll from:  C:\Program Files (x86)\Common Files\Apple\Apple Application Support
to: C:\Program Files (x86)\iTunes
Worked for me, so happy! Hope it does for all you lot too!

Similar Messages

  • Brightness and volume control keys not working with windows 7?

    brightness, volume control and some other keys keys are not working with windows 7 with macbook pro retina. Can I fix it?

    Welcome to the Apple Support Communities
    Have you installed Boot Camp drivers? You need them to make your computer work properly on Windows, and to use your function keys as Play or Pause, volume and brightness keys.
    To install them, follow these steps:
    1. Press the X key while your Mac is starting to start into OS X.
    2. Open Boot Camp Assistant and tick only the option to download Windows support software.
    3. Windows support software will be downloaded and Boot Camp Assistant will ask you to burn it into a DVD or USB drive, so do it.
    4. Start into Windows, insert the DVD or USB drive and install Boot Camp drivers. Your Mac and your volume and brightness keys will be working after installing the drivers

  • ActiveX control is not working with windows NT

    I've have a stand alone application which uses an activeX control.  The application was compiled using Labview 7.1 on a Windows XP machine.  The application will run without any problems on Windows XP and Windows 2000, however the activeX control will not work with Windows NT 4.0.  The activeX control is registered, and I have also compiled the application on a Windows NT 4.0 machine.  I do not receive any error messages, the application will start but will not communicate with the activeX control.  Does anyone have any suggestions?  

    Hello,
    Have you tired running the VI by itself (not exe) on the NT machine? Make sure you are doing adequate error checking in your code. It could be possible that the application is generating an error which in not handled appropriately. Also which service pack do you have installed on the NT machine? Please look at the release notes for LabVIEW 7.1 here.  
    Regards,
    Chetan K
    Application Engineer

  • Head phone volume controls are not working after updating to ios 6.1 y?

    head phone volume controls are not working after updating to ios 6.1 y?

    I have tried my head phone with other iphone still the same problem may be my head phones has been not working need to chek my iphone with other head phones which are working

  • Parental Controls are not working correctly.  Websites I've listed under Allow Access are still blocked.  How can I fix this?

    Parental Controls are not working correctly.  There are websites I've listed under Allow Access, however they are still blocked. - such as:  Yahoo mail and USAA banking.  How can I fix this?

    Hendry
    Just thought I'd let you know.  Our suspicions were correct, it was the OS. After I installed Snow Leopard (10.6.8) all the problems were corrected.  I also updated the RAM from 1 gb to 6 gb. The mac is working all around better. Sorry it took so long to get back to everyone. My superdrive had pooped out. Rather than replace it I got an external drive from OWC connected with firewire 800.  So far everything is running very well, as far as I can tell this external drive is better than the original superdrive. My superdrive has always acted funny, infact I returned the first mac I got after a week because its superdrive was also malfunctioning. Anyway, all that to say everything seems to be fully functioning again.
    Roy
    Re: Function keys are not working correctly 

  • Internet Explorer, Chrome, or Firefox are not working in Windows 8

    Internet Explorer, Chrome, or Firefox are not working in Windows 8

    I found this on another forum and it worked for me.
    This problem usually has to do with TCP/IP or Winsock requiring a reset.
    Winsock entries tells Windows 7 how to access your network services. Additionally, your TCP/IP protocol can
    be corrupted. The TCP/IP protocol is a stack of 4 layers that includes several transport layers, but when this stack is corrupt you will constantly have connectivity issues.
    You need Admin access to enter the codes below. Windows button + x, then choose Command Prompt (Admin)
    netsh winsock reset catalog (reset winsock entries)
    netsh int ip reset reset.log hit (reset TCP/IP stack)
    You may have to reinstall Chrome and Firefox or reboot to have the chnage take place.
    Hi,
    This seems to be the only solution to my problem, however this is temporary. Any advice on a more permanent resolution?
    I have also tried  to disable  "Automatically detect settings" under: "Internet Options/Connections/LAN settings/Automatically
    detect settings".
    This has no affect.
    Thanks,

  • Both my cameras are not working I took it in and they reset the phone and it still continued to happen what can I do?

    Both my cameras are not working I took it in and they reset the phone and it still continued to happen what can I do?

    If a Restore of iPhone with iTunes on computer does not get it working correctly. Then it is hardware problem. Apple with handle this with Replacement iPhone 4S exactly same as yours for $199. If there is any hope at fixing this otherwise, first step would be to replace the front (facetime camera) first. See if both cameras function after this. If not, if there is any fix possible it will be very difficult. Replacement iPhone may be best plan.

  • Brightness Control Hotkeys are not working after windows 10 Update

    Hi Experts, I am Using HP Pavilion 15-NOO3TXRecently I Updated Windows 10 from Windows 8.1All Drivers are updated Sucessfully.I have Intel Graphics and AMD Radeon HD 8600both are also updated Sucessfully. but F2 and F3 hotkeys are not working for brightness adjustments.when i Unistall AMD Radeon drivers then hot keys are working properly(only with intel graphics)  Please Take a look for my Drivers But in Video Memory it showing only 128MB Dedicated Video Memory   I Installed AMD Drivers using autodetectutility.exe from AMD Website.how can install both AMD Radeon Drivers and brightness hotkey adjysutment. 

    Hi Erico,I tried your method It says The best driver software for your device is already installed I Used this tool http://www.techspot.com/drivers/driver/file/information/16748/and I cleaned up all display drivers.windows searched in updates for drivers and updated all video drivers.now brightness control key is workingbut when i checked dedicated video memory it says 128 MB.but my dedicated video memory in 1024 MB.Take a look for Video memory

  • H8-1287 Beats Audio controls do not work in Windows 8.1

    I've upgraded to Windows 8.1 and installed the IDT High-Definition audio driver from HP's website.  The surround sounds seems to be working but the controls do not work to modify the EQ etc.  I've seen the problem has been resolved for Envy laptops but all the links for the software appear to only be for the notebooks and not compatible with my desktop system.  I've downloaded the available software (IDT High-Definition Audio driver) found under my HPE HI-1287 product from HP's support site but the Beats audio control panel doesn't seem to make any sound quality changes.  Hopefully there is a driver somewhere compatible with my desktop system that allows controling the audio properly.  Thanks.

    Hello @KICR,
    I understand that the Beats Audio Console is not adjusting the audio settings on your HP Pavilion HPE h8-1287c Desktop PC running Windows 8.1. According to the HP Pavilion HPE h8-1287c Desktop PC Drivers page there are no Windows 8.1 drivers for your computer. I can only assume that this means your computer is currently using Windows default drivers or Windows 8 drivers and the Beats Audio Console is not able to interact properly with the currently installed driver.
    All I can recommend is that you check back periodically to the drivers page I linked above and see if Windows 8.1 drivers have been created. Other than that your only option at this time would be to use the HP Support document: Using Microsoft System Restore (Windows 8) to restore your computer back to Windows 8 where the Beats Audio Console has drivers that are compatible.
    I hope this helps. Thank you for posting on the HP Forums. Have a great day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • USB Ports are not working in Windows 7

    I am on a MacBook and I installed Windows 7 via Bootcamp. It is working amazingly. I love all the new features and the look.
    But all my usb devices are not working. I have a external HD and a Zune and a printer plugged in and nothing shows up.
    I have tried with my usb hub and without. Doesn't make a difference.
    BUT, they do show up in the Hardware and Devices place. Like I can remove them but not explore them.
    I have installed all the drivers for bootcamp and everything.
    Please help.
    Thanks in Advance.
    Best Regards,
    Luc

    "I'm a new mac user and I've just purchased a Late 2009 Macbook White. I updated bootcamp and installed windows 7 on it, and upgraded the boot camp assistant on the Windows 7 to 3.1. but when ever i plug in a Flash drive into the upper slot it does not seems to recognize it and there is no safely remove icon on the task bar, but i am able to see it in my computer. but when i plug the same flash drive to the lower usb slot everything works fine, autorun, safely remove. can any one help me with this problem, is it a Hardware problem or Software problem."
    do you have the same problem as me?

  • Satellite A300-1DG - Easy keys are not working on Windows 7

    My easy key are not working but the fn keys are. I installed all drivers for Windows 7 64 bit and they are still not working?
    Please help

    I did a clean install, and i installed VAP, the keys are working but the first one is not, and the second one which is used for opening WMP is now used for turn on/of the illumination keys, all other are working normal. I tried reinstall the vap, with cleaning the registry and then reinstalling...but it was the same...

  • CC controls are not working. No sync; no apps

    I purchased a new MacBookPro and used the Migration Assistant to make the transition. All my Adobe apps made the crossing but now my CC controls do not work. When I open my CC account (Photography) it shows no apps and neither will it allow me to set up and run a sync folder. So far as I can tell my PS and LR apps are working fine and I also managed to download and install the latest LR CC version. But Utah's it. Any ideas?

    Mac Migration and Time Machine DO NOT WORK with Cloud program activations due to hidden files
    Sign out of your account... Uninstall... run the Cleaner...
    -http://helpx.adobe.com/creative-cloud/help/install-apps.html (and uninstall)
    -using the cleaner after uninstalling and before reinstalling is needed
    -https://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html
    -Restart your computer... Sign in to your account... Reinstall

  • Brightness control keys not working in windows 10

    my shortkeys for brightness and mute are not working after upgrading to windows 10

    Check videocard driver in Device manager, probably it installed wrong

  • Lync Server 2010 conference not working with Windows 8.1 and IE 10

    Hello,
    The problem is that whenever a Windows 8.1 user tries to join a Lync server 2010 conference using Internet Explorer 10 (or 11, tried that too) the user can't join the conference. If the conference is created by a Lync server 2013 user joining works fine.
    When using Lync 2010 client we get the following error in the client: "error id 87 source id 7".
    When using Lync 2013 client we end up with a blank conversation window.
    There are no traces in server log, client log or event log.
    Below is a set of use cases that may help you to understand what is the problem scenario. Each of these works or does not work with both Lync 2010 and Lync 2013 client.
    - Lync server 2010 conference, windows 7, Chrome, Firefox, IE 10 or 11 --> Works.
    - Lync server 2010 conference, windows 8.1, IE 10 or 11 --> Does not work.
    - Lync server 2010 conference, windows 8.1, Chrome or Firefox --> Works.
    - Lync server 2013 conference, windows 8.1, Chrome, Firefox, IE 10 or 11 --> Works.
    It does not help to add the meet address to IE compatibility list (Compatibility View Settings).
    If i press F12 in IE and change the document mode of the meet page to IE 9 version then i can join meetings with Windows 8.1 and IE 10. Unfortunately i cannot make that as a default setting for the meet website.
    Any ideas on how to get Lync server 2010 meetings working with Windows 8.1 and IE 10 or 11?
    IE is the company default browser. Windows 8.1 is not a default operating system but we have increasing number of Windows 8.1 computers in our environment (mainly directors).

    According to your description, it is hard to tell whether the issue is related with IE or Lync Server 2010 or both.
    Compare the log when Lync client on Window 8.1 with IE 10 or IE 11 join Lync server 2010 conferencing and Lync Server 2013 conferencing.
    Lisa Zheng
    TechNet Community Support

  • What do we do if Applications are not working in iPod touch?and why?

    What do we do ifif applications are not working in iPod touch?why??

    Try here:
    iOS: Troubleshooting applications purchased from the App Store
    Things can happen for various reasons and most of the time the reason is never found but vry frequently it can be corrected.

Maybe you are looking for