Itunes 7.0 says that my ipod cannot be updated

after installing itunes 7.0, whenever i try to sync my ipod with itunes, i get this message: the ipod cannot be updated, the required file cannot be found.
i was synchronizing and updating just fine with my 6.0. i have no idea as to why i am now all the sudden missing required files. any idea and suggestion lead to my ipod being able to sync and update sucessfully will be greatly appreciated.

I have a similar problem - only mine says unknown error -48. I can not find anything on this site that lists error codes.
Original problem was that version 6 just stopped working - just would not load. So, I went to to website, and found that there was a newer version, so I downloaded and installed that. It takes over 24 hours to import a CD to itunes now (as opposed to 10 minutes), and I can not connect to my ipod (see above). I tried to go back to the 6 version, but it said I could not as files had been changed.
So now I am stick with this new version, which I reinstalled, and I can't do a thing.
Michelle

Similar Messages

  • I am trying to attach an Ipod touch to an older Power Book G4, It says that the Ipod cannot be used because it needs Itunes version 9.2 (running 8.0.1). When I try to install the latest 10.3.1 it says ("Open failed" requires Mac OX S 10.5

    I am trying to attach an Ipod touch to an older Power Book G4.
    Itunes says that the Ipod cannot be used because it needs Itunes version 9.2 (running 8.0.1).
    When I try to install the latest Itunes version 10.3.1 Mac says ("Open failed" requires Mac OX S 10.5.

    Click here and install the software.
    (58765)

  • Everytime i connect my ipod to the computer, itunes says that this ipod cannot be used because the apple mobile device service is not started, what should i do?

    Everytime i connect my ipod to the computer, itunes says that this ipod cannot be used because the apple mobile device service is not started, what should i do?

    See this article for how to restart this service.
    http://support.apple.com/kb/TS1567
    B-rock

  • When i plug my ipod touch 4g into my computer is says that "this ipod cannot be used because the apple mobile device service is not started"  what do i do?

    when i plug my ipod 4g into my computer is says that "this ipod cannot be used because the apple mobile device service is not started" what do i do?

    http://support.apple.com/kb/TS1567
    There have been some problems accessing pages on the Apple web site.  If the hyperlink gives you a "We're sorry" message, try again.

  • HT1420 I download films from the iTunes but they say that this content cannot e openedthere is no authorization

    I download films from the iTunes but they say that this content cannot be openedthere is no authorization

    Try this Google search to locate apps compatible with you iPhone,
    "requires ios 4.2" site:https://itunes.apple.com/us/app
    or to get a list of apps that were updated recently,
    "requires ios 4.2" site:https://itunes.apple.com/us/app 2013
    (almost 20,000 results in this list.

  • HT1351 Whether or not I sync items on iTunes to my ipod, I cannot eject the ipod because a message keeps coming up and saying that my ipod cannot be ejected because it contains files that are being used by another application. How do I fix this?

    I just got an ipod classic 7th generation a couple days ago and I'm having a heck of a time with it. My latest problem is that with media on iTunes, I cannot eject the ipod because it says that it cannot be ejected because it contains files that are being used by another application. What application is this, and what do I do about it?

    Hi newipoduser,
    Here are some possible solutions:
    Do you use musicmatch jukebox on your computer? If you do, you have to go into task manager on windows and end process mim.exe. It interferes with disconnecting ext devices
    Empty your "trash/recycle bin."
    If that doesn't work, try quitting all your programs, especially music-type programs, basically things that look for mp3's etc.
    if that doesn't work, "log off" then "log on" and that should refresh/purge your OS system.
    Finally, you can restart your computer.
    Hope one of these helps!
    Cheers,
    GB

  • ITunes says that my iPod cannot be used because the required software is not installed.  Says to install 64-bit version.  Problem is 64-bit version is installed already.

    I have a 64 GB iPod operating on iOS 5.1.1 (says software is up to date).  I finally was able to download iTunes 64 Bit to my computer and open it.  Now when I connect my iPod to the computer, I get a message saying "This iPod cannot be used because the required software is not installed.  Tun the iTunes installer to remove iTunes, then install the 64-bit version of iTunes."    I have removed iTunes from my computer and downloaded the 64-bit version again and installed it.  I still get the same message.

    Hi antiklady,
    I see that you may be having an issue with compatibility of iTunes when connecting your iOS device. This sort of issue can arise if you have two versions of iTunes installed on your computer, which I feel may be the case. Here is an article that can tell you how to identify the version of iTunes that you have open:
    iTunes: How to find which version you are using - Apple Support
    http://support.apple.com/en-us/HT201521
    If the version of iTunes that is opened is not the version you are required to use for the iOS device in question, try searching through your computer or applications folder to see if there may be two versions of iTunes installed on your computer. Then, uninstall the version that is incompatible using these steps:
    Remove and reinstall iTunes and related software components for Windows Vista, Windows 7, or Windows 8 - Apple Support
    http://support.apple.com/en-us/HT1923
    Take care, and thanks for visiting the Apple Support Communities.
    -Braden

  • ITunes says that my iPod cannot be synced because I'm out of space, but the capacity display at the bottom shows I have plenty of space.

    This image shows what's wrong. iTunes says that I need 1.74 GB more to sync, but the display at the bottom clearly shows that this isn't the case; it's the breakdown of storage on my iPod after a sync. What can I do?
    iPod touch 4th gen running iOS 5.0.1.

    It means you try to sync an amount of content to your iPod Mini that exceeds for 4 GB, or the amount of space that is available on the iPod.  See this article for more details.
    How to sync music to your iPod when your library is bigger than your iPod storage space
    B-rock

  • HT1414 i am following the instructions given and clicking on update but it just says that my ipod doesnt need updating. But when i go to download apps every single one says i need an upgrade on my iso

    i really need some help, no app is downloading on to my ipod :/

    What generation is your iPod? Some apps require the latest iOS to operate fully. And only iPod 3rd and 4th generation can upgrade to latest iOS.
    This could be part of the issue, just a suggestion.
     also you could check settings>general>software update section on iPod also.
    Hope this helps !!

  • My ipod cannot be updated??!!!

    when i restored my ipod nano i went to sync my ipod with the existing library in itunes and i got this message:
    "ipod cannot be updated. the disk could not be read from or written to." what the **** does that mean? please help me.

    See this troubleshooting article.
    Disk cannot be read from or written to error syncing iPod in iTunes.

  • "This ipod cannot be updated. The files are corrupted and unreadable"

    This message now appears when I connect my ipod to itunes....
    "This ipod cannot be updated. The files are corrupted and unreadable"
    The ipod still works and charges, but it will no longer let me add new files to it. The contents of my ipod are still displayed as usual on itunes, so it obviously is reading it to some degree. It advises me to run a chkdsk utility, but I have no idea how to do this.
    Has anyone encountered a similar problem? Does anyone know how I can fix this problem?
    Many thanks

    If your iPod is corrupt then you have no choice but to restore it.
    Before you do that, you may have some success getting the music off it and onto your hard drive again.
    Check out the instructions/suggestions here.
    Music from iPod to computer.

  • My itunes says that my ipod is synced with another library when it is not and cannot update or sync without wiping it and all its data

    My itunes says that my ipod is synced with another library when it is not and cannot update or sync without wiping it and all its data
    Can anyone help me

    Syncing to a new iTunes library or computer will erase your ipod. Only if you back up your iPod manually before syncing, you can restore your device from that backup again. A manual backup does not include the sync process.
    Do this:
    Disable autosync in iTunes, connect your iPod to your new computer and right click on it in the device list and choose backup. iTunes will backup your iPod without syncing.
    Transfer your purchases the same way, choosing "transfer purchases" this time.
    All media content will be erased during the first sync, but you can restore your settings and app data from your manual backup afterwards.
    Don't forget to set up at least one contact and event on your new computer to be able to merge calendars and contacts when you sync the ipod for the first time.
    Music is one way only, from the computer to your device, unless you bought the songs in itunes and transferred your purchases.
    There is 3rd party software out there, but not supported by Apple, see this thread:http://discussions.apple.com/thread.jspa?threadID=2013615&tstart=0

  • I have been trying to restore my ipod on itunes but a lil box always pops up saying that my ipod software update server cannot be contacted what do i do i need help i feel like i tryed evrything plz help???

    i been trying to restore my ipod on itunes but a lil box always pops up saying that my ipod software update server cannot contacted i feel like i tryed everything idk what to do i need help

    Try:
    - Powering off and then back on your router.
    -iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
    - Change the DNS to either Google's or Open DNS servers
    Public DNS — Google Developers
    OpenDNS IP Addresses
    - Try on another computer/network
    - Wait if it is an Apple problem

  • I am trying to put the music from my ipod onto my new computer. After installing itunes and connecting my ipod touch a message comes up saying that my ipod is already synced with another library. What can I do to sync it with a new library?

    I recently got a new computer and got rid of my old one. I am trying to put the music from my ipod touch onto my new computer but keep getting a message saying that my ipod is already synced with a library and cannot be synced with more than one. How do I access that library on my new computer and if I can't are their other ways for me to put the music on my ipod into my new computer?

    Syncing to a new iTunes library or computer will erase your ipod. Only if you back up your iPod manually before syncing, you can restore your device from that backup again. A manual backup does not include the sync process.
    Disable autosync in iTunes, connect your iPod to your new computer and right click on it in the device list and choose backup. iTunes will backup your ipod without syncing.
    Transfer your purchases the same way, choosing "transfer purchases" this time.
    When you connect your iPod for the first time, all media content will be erased. But you can restore your settings and app data from your manual backup afterwards.
    Don't forget to set up at least one contact and event on your new computer to be able to merge calendars and contacts when you sync the ipod for the first time.
    Music is one way only, from the computer to your device, unless you bought the songs in itunes and transferred your purchases.
    There is 3rd party software out there, but not supported by Apple, see this thread:http://discussions.apple.com/thread.jspa?threadID=2013615&tstart=0
    About backups and what's saved: http://support.apple.com/kb/HT4946
    How to back up and restore:http://support.apple.com/kb/HT1414
    How to download apps for free again:http://support.apple.com/kb/HT2519
    Saving other data is also described here. How to back up your data and set up as a new device

  • I tunes keeps telling me that this ipod cannot be used becausethe apple mobile device service is not activated. I cannot get thie device to even come up in itunes.

    I-tunes keeps telling me that this ipod cannot be used because the apple mobile device service is not started. It was previously working and syncing, but now windows doesn't seem to be recognizing it. What can I do?

    Hi there! You can fix this error by doing the following:
    1) Click your Start button in Windows, and click "Run".
    2) In the box that appears, type "services.msc" (without the quotes) and hit enter. A new window with a big list will appear.
    3) Find "Apple Mobile Device" service in this list, right-click it and go to "Properties".
    4) In the window that pops up, make sure that drop-down box is set to "Automatic", then click the button that says "Start". A progress bar will briefly appear and disappear and it will be started. Click Apply/OK.
    5) Try running iTunes again, it should work!

Maybe you are looking for

  • Upgrading final Cut Pro - recieved as a gift, and designated "Not for Sale"

    I've been working in FCP with a version that a friend, in the business, was given as a perk and passed on to me. The FCP that he gave me is marked "Not for Sale". I did register it. I just upgraded to Tiger and am having problems with dropping frames

  • How to calculate with holding tax for the open item

    Dera all, Can you tel me how to simulate with holding tax for the open item? i will try do it using FI_WT_F110_CALCULATE FM  but it dosnt work. plz help me regard nawa

  • Count total no of records in csv file

    hello i made a function which count total no of records in csv file. but it always return 0 goes in the exception when no data found which it also display the total no of records in another parameter. code is here CREATE OR REPLACE FUNCTION COUNT_REC

  • No auth error while executing BI integrated planning Query

    Hi to all, I have created integrated planning Query in Bex Query designer. But while executing BI integrated planning query in portal, its giving errror. 1.     No authorization for query "IP" 2.     You are not authorized to edit this aggregation le

  • How to view photos in alphabetical order

    Well I have about 300 photos that need to be ordered alphabetically but my iPod touch does it by the date taken I believe and so this is no good for me so is there any program that will allow me to batch change date taken, on photos and with time/dat