ITunes 7.1 want load due to Audio Problem

I upgraded to iTunes 7.1 and I can not load it as I get a message pop-up telling me
"iTunes cannot run because it has detected a problem with your audio configuration"
Thers nothing wrong with it and it won't tell me what that problem is ???
I am using Windows Vista.

Read this and follow the steps:
http://docs.info.apple.com/article.html?artnum=304424
Good Luck,
Rachyl

Similar Messages

  • I downloaded itunes, but it says I have an audio problem and can't play the game I purchased, any ideas?

    I downloaded itunes on my pc, but it says I have an audio problem and won't let me play the game I purchased, any ideas?

    Why do you assume that this problem is a "bug" that Apple has to address, and not a problem with your phone, that you need to address.  Do you see others having this specific problem?
    Try:
    1. Reset phone (no data loss): press both the home and power buttons for at least 10 seconds, releasing when the Apple logo appears
    2. Install using iTunes on your computer/

  • ITunes Store is not loading at all - same problem for Safari

    Dear all,
    Got the a.m. problem. iTunes Store is not loading at all. Safari in the same way. It stops while loading any site. After "www." the developement bar stops and is giving up as well. Guess for malfunction of Safari also the problem for the iTunes Store occurs.
    What can I do? I do not remember having changed anything. All version are on the newest version and should be ready to go.
    Thanks for all your comments and help which are much appreciated.
    Benjamin

    i think i could say they're only saving grace is being able to swap music from different computers. Had to go on my old mac g5 to access the store as it still has the old version of itunes and then transfer them with the shared library feature. But still it shouldn't have been that hard. Very disappointed with the lack of support from one of the biggest companies in the world. such an inconvenience, especially when it's then that's losing the money with the lack of access to the store.

  • I have downloaded cds into my itunes library and want to load them ont my ipod touch.  it is only transferring music that i have purchased.  How come?

    I have downloaded cds into my itunes library and want to load them ont my ipod touch.  it is only transferring music that i have purchased.  I did not have this problem with my iphone or my old ipod touch.  How come?

    Do they play in iTunes on the computer?
    Did you use the iTunes import feature?
    http://support.apple.com/kb/PH12486
    What is the format of the songs? Select a song and right click and select Get Info and go to the Summary tab

  • Hi- I applied the iTunes up to my Windows 7 86bit PC last Wednesday and iTunes will not load due to a Runtime error r6034Access to C Runtime Library Incorrectly. Then I get an windows error code 1114. I have tried rollling back and reinstalling but no joy

    Hi- I applied the iTunes up to my Windows 7 86bit PC last Wednesday and iTunes will not load due to a Runtime error r6034Access to C Runtime Library Incorrectly. Then I get an windows error code 1114. I have tried rollling back and reinstalling but no joy

    Hi Keen itunes User,
    Thanks for using Apple Support Communities.  This article has steps you can take for the error you're seeing:
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Cheers,
    - Ari

  • New iTunes update won't open.  First it said Apple Mobil Device failed to start.  So I Stopped then Started Apple Mobil Device.  Now iTunes still won't load.  Tells me MSVCR80.dll was not found.  Wants me to reinstall app.  Will I lose all my music?

    Current iTunes update won't load.  Tells me MSVCR80.dll was not found.  Wants me to reboot.  If I reboot, will I lose my music?

    Hi DDay@55,
    Thanks for visiting Apple Support Communities.
    To resolve this error, I recommend completely removing and reinstalling iTunes and all of its related components using these steps:
    Check for .dll files
    Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
    If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
    Reboot your computer.
    Note: Depending on your operating system, you may only have one of the listed paths.
    Uninstall and reinstall iTunes
    Uninstall iTunes and all of its related components.
    Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
    Re-download and reinstall iTunes 11.1.4.
    You can find the article with these steps and more information here:
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    This process should not affect any music or content on your computer, but you may want to
    back up your iTunes library by copying to an external hard drive.
    Best,
    Jeremy

  • Itunes won't work due to audio configuration

    Help! Just downloaded / updated to Itunes 7.3 on Window XP
    laptop. Itunes, however, will not work due to problem with
    "audio configuration".

    http://docs.info.apple.com/article.html?artnum=304424 go there. it worked great for me. delete quicktime and reinstall it.

  • How do I get refund of a tv season in my itune. I want it removed and refunded due to no closed caption on it.

    How do I get refund of a tv season in my itune. I want it removed and refunded due to no closed caption on it.

    All sales are final

  • I want to stream all audio to my stereo via AirPort. Right now audio only streams with iTunes, not when I'm online (YouTube, SoundCloud, Spotify). What must I do? Thanks! 2011 macbook pro 10.6.8

    I want to stream all audio to my stereo via AirPort. Right now audio only streams with iTunes, not when I'm online (YouTube, SoundCloud, Spotify). What must I do? Thanks! 2011 macbook pro 10.6.8

    Thanks, Bob. I've seen this suggested before. However, I'm at a friend's place (cat-sitting). He owns an older MacBook (almost positive) and he streams audio without Airfoil. All he uses is AirPort Express. He told me to simply click alt-option and the volume icon and a menu drops down, and I select "AirPort Express". But it never appears. All the menu offers is this:
    "AirPort Express" isn't an option.
    Why is that? Is there something fundamental I'm not doing?

  • Itunes songs won't populate in the audio browser for slideshow. Says that they are loading, but after 2 hours gave up. How do I fix this challenge?

    itunes songs won't populate in the audio browser for slideshow. Says that they are loading but after 2 hours I gave up. How do I fix this challenge?

    Can you access the iTunes Library in other app? IPhoto? IMovie? If not, then I'd bring that to the iTunes forum

  • Help.I have an itunes account and wanted to set up a new one .All my music from existing account loaded automatically onto new itunes account.The main point of this was to start with a blank canvass

    help.I have an itunes account and wanted to set up a new one .All my music from existing account loaded automatically onto new itunes account.The main point of this was to start with a blank canvass

    Yes
    Put all the music on one computer, make sure it is authorized for all accounts, sync.

  • HT4061 My Ipad was part of my tuition. My school "IIN" loaded all my audio and video classes on it. I diseabled it by entering the wrong passcode it says connect to Itune. How do I make sure I do not lose my classe recording by doing so? please help. Than

    Hello, I am and IIN Intitute of Integrative Nutrition in New York student. My iPAD 2 is part of my school material and was uploaded with all Videos and Audio classes for the whole program. I recently typed in my passwork incorrectly and disabled my iPad it is giving me the message " connect to i-tunes". I am afraid to loose my lectures. Could anyone help me with some information please? Thank you very much. Wouga22

    If you do not have a backup you are going to lose everything on your iPad and even if you do have one, you may still be out of luck.
    You have to restore the device within iTunes. You want to use the same computer that you always sync with so that you can restore your app data and settings. You can restore with any other computer, but you will lose everything on the iPad.
    Read this very carefully before you proceed. Sometimes iTunes will allow you to restore the iPad without having to use recovery mode, but if you need to use recovery mode and don't have a backup, that is where you may have a problem.
    http://support.apple.com/kb/ht1212
    If you need recovery mode ....
    Recovery Mode Instructions
    Disconnect the USB cable from the iPad, but leave the other end of the cable connected to your computer's USB port.
    Turn off iPad: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for iPad to turn off.
    If you cannot turn off iPad using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the iPad turns off, release the Sleep/Wake and Home buttons.
    While pressing and holding the Home button, reconnect the USB cable to iPad. When you reconnect the USB cable, iPad should power on.
    Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears you can release the Home button.
    If necessary, open iTunes. You should see the recovery mode alert that iTunes has detected an iPad in recovery mode.
    Use iTunes to restore iPad.

  • HT1386 I have a brand new iphone 4s the service provider loaded my contacts onto the phone I am connected to my computer and have itunes up it wants to set up as a new iphone will I lose my contacts if I say yes?

    I have a brand new iphone 4s the service provider loaded my contacts onto the phone I am connected to my computer and have itunes up it wants to set up as a new iphone will I lose my contacts if I say yes?

    Yes you will.

  • ITunes wont open due to audio configuration.

    Hopefully someone can help me, when I click to open iTunes, a message pops up saying "iTunes cannot run because it has detected a problem with your audio configuration." I have windows vista and dont know what I need to change or where I change it. Please help!
    Nicole.

    Perhaps this Apple KnowledgeBase article will help:
    iTunes 7 for Windows: iTunes had detected an audio configuration problem
    Good luck.
    Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Discussions page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic, both in the relevant forums, in the User Tips Library and in the Apple Knowledge Base before you post a question.
    Regards.

  • Itunes starts but fails to open due to audio configuration problem

    Hi
    I have been running itunes 7.1 quite successfully until today. Running on windows xp/toshiba laptop.
    Problem occurs when i select itunes on desktop, itunes appears on task bar below, after a number of seconds the following error message appears "itunes cannot run because it has detected a problem with your audio configuration", once I click ok on this message itunes terminates.
    No changes have been made to my audio configuration (to the best of my knowledge), i can run Windows Media Player and that works fine, so too real player.
    I reinstalled itunes, but this did not resolve the problem. I also ran itunes from another logon on my laptop and that presented the same error. I checked all my audio settings in the control panel and also ran the diagnostics on each device and all appears to be fine.
    Has anybody faced the same issue, and could anybody advise on any diagnistic tool that could assist in pinpointing the configuration problem?.
    Thanks
    Toshiba Satellite   Windows XP Pro  

    Hi
    Got it resolved, thanks for the prompt responses all!.
    Resolved by removal current version of Quicktime thru the control panel (add/remove programs), and then reinstalled from the website.
    Phew!
    Toshiba Satellite   Windows XP Pro  

Maybe you are looking for

  • Why do columns not appear in the same order as the fields on my imported form?

    Hello All I am an Acrobat X user and make numerous forms through Acrobat.  However, when I import the file into FormsCentral, the order of the fields in the table do not correspond to the order in which they appear on my form.  The fields on my form

  • Thunderbolt iMac - mini-dvi to HDMI - Image not sharp on TV

    I am trying to use my TV as a second monitor for my newish iMac.  I used to do the same thing with my macbook (2006) with a mini-dvi to HDMI adapter.  The signal then was crisp and typical of 1080p.  I recently tried two different mini-displayport to

  • RFC Adapter work well as receiver but no data got transferred

    I have a JDBC>XI>RFC scenario, I can fetch the data from the ORACLE database side and both the sender and receiver communication channel works well, also when I set an external break point in the RFC module I can dubug it on the ECC side, but there i

  • Loop Inside loop, time out error.

    Pls look into the below code, In this im looping inside a loop. Im looping thru the internal table( say 2000 records ) which has data from a select query, inside this loop  i need to calculate the total of output qty which is available in the another

  • Different behaviour in MAX vs. LabVIEW when writing to IMAQdx GigE attribute

    Hi, I am controlling a Dalsa GigE camera in LabVIEW RT using IMAQdx.  Apart from a couple of quirks with the interface we are acquiring images without much problems at the moment.   However, there are one or two issues that are confusing us.  In this