ITunes 8.1 (Win) + 5G iPod: disk use mode now always on

After recently updating to iTunes 8.1.0.52 (Win XP Pro SP3), my 5th Gen. iPod always mounts in disk use mode no matter how I have set the "Enable Disk Use" prompt in iTunes.
At mount, I always see a new drive letter assignment with the default iPod disk folders (Calendar, Contacts, Notes) visible and writable. The normally hidden iPod_Control folder also is visible on my system due to my OS settings. I have not tested its writability.
This drive assignment is visible only during the initial iPod sync, after which it disappears.
It does not reappear on subsequent syncs within a given "mounted session," but does reappear if I disconnect the iPod (always manually, regardless of disk use setting) and then reattach the dock adapter cable.
Always, the drive assignment persists only so long as the sync is active.
The iPod itself is at software version 1.3, and has been since that version was launched in 2008(?).
Naturally, I suspect a software problem in iTunes 8.1.
The ability to mount an unauthorized drive can potentially give rise to serious security issues, especially when there appears to exist no option NOT to mount the drive. Thus, I mention it here for the record.
James A.
Asheville, NC

Hey there, I'm having the exact same problem! Very annoying - have you found a solution by any chance?
I've restored my ipod and reset everything I can but since I updated the software continuous mode is kaput......Cheers

Similar Messages

Itunes does not recognize my iPod Touch using Windows 7 - 64bit

Itunes does not recognize my iPod Touch using Windows 7 - 64bit. Is this a driver issue? Has anyone else had this problem? Is there a fix?
Message was edited by: Mark DiGiacomo

hi sally,
see if this user tip by Yorkwill helps:
+In the end what works is to just force the drivers on what windows thinks is a camera, i.e. to ‘update’ the device to use the correct driver. There are some hints on how to do this already listed on this forum, but I’ll try to give some more detailed information:+
+1. First off you need to have iTunes installed and the ipod touch plugged in+
+and recognized as ‘something’ e.g. digital camera (it shouldn’t really+
+matter what it’s recognized as, but it needs to be found by windows).+
+2. Search for usbaapl in the C:\WINDOWS system folder:+
+o open windows explorer (e.g. Right-click Start and then click ‘explore’)+
+o right-click the WINDOWS folder and select ‘Search’).+
+o type in usbaapl and hit Search – try to ignore the dog!+
+You should find the driver info in a sub folder of+
+C:\WINDOWS\system32\DRVSTORE e.g. C:\WINDOWS\system32\DRVSTORE\usbaapl_A65621D65F5B7507DD7B22331826547BDD2D206B+
+Remember that location (either leave the search box open or copy the folder+
+name into note pad – you’ll need it later)+
+If you don’t find usbaapl.sys, usbaapl.inf etc. then your drivers have not+
+been installed with the iTunes install and you’ll have to reinstall iTunes.+
+3. Locate the ipod-camera device:+
+o Open the device manager, e.g. using Start > Control Panel >+
+Performance and Maintenance > System > Hardware Tab > Device Manager+
+o Look for a device called ‘ipod’ - if your ipod shows up as+
+‘digital camera’ it will be under something like ‘imaging devices’.+
+4. Update the driver:+
+o Right click the ‘ipod-camera’ in device manager and click on+
+‘Update Driver’ – the Hardware Update Wizard will open.+
+o Check the ‘Install from a list or specific location’ then click ‘Next’+
+o Check ‘Search for the best driver in these locations’. Un-check+
+‘Search removable media’ and check ‘Include this location in the search’.+
+In the text box below type (or better copy and paste) the folder+
+containing the ipod driver information found in step 1 (in the example+
+above it was C:\WINDOWS\system32\DRVSTORE\usbaapl_A65621D65F5B7507DD7B22331826547BDD2D206B), +
+then click Next.+
+You should now see something like ‘Apple ipod device driver’ or so. Continue+
+installing that device. Once the driver has been installed the ipod will come+
+to life and iTunes (if you have it open) will show it.+

Mistakenly change file extension while in disk use mode

I made the mistake of changing the file extension of a file on my Nano (5G) while it was in "disk use" mode. When I unplugged the device and later plugged it in, the modified file was gone. Does the Nano treat unrecognized files as non-existant? I tried using Windows Explorer to find the file, but nothing was there. Also, the overall memory used on the Nano has decreased by what I would guess is the same amount as the missing file. I'd like to get my file back. Any suggestions?

Processing Raw in a 3rd Party Application
You can also process your Raw with a 3rd Party app like ACR or Photoshop. But iPhoto does not handle this gracefully and it's a bit of a kludge.
First off set your preferred app as an external editor in iPhoto:
You can set Photoshop (or any image editor) as an external editor in iPhoto. (Preferences -> General -> Edit Photo: Choose from the Drop Down Menu.) This way, when you double click a pic to edit in iPhoto it will open automatically in Photoshop or your Image Editor, and when you save it it's sent back to iPhoto automatically. This is the only way that edits made in another application will be displayed in iPhoto.
Note that iPhoto sends a copy+ of the file to Photoshop, so when you save be sure to use the Save command, not Save As... If you use Save As then you're creating a new file and iPhoto has no way of knowing about this new file. iPhoto is preserving your original anyway.
Next: In the iPhoto Preferences -> Advanced, elect to use Raw with your External editor:
Uploaded with plasq's Skitch!
Now when you go to edit the Raw it will be sent to your external editor.
Now for the kludge:
You cannot save a Raw. The work you do must be output to a new file, in a new format (jepg, tiff, whatever). However, as the External Editor is making this new file iPhoto has no knowledge of its existence. Therefore you *must save it to the desktop and then import it back to iPhoto as a new file*.
This means that you will have your Original Raw and the processed version in iPhoto but they will not be recognised as version and original. iPhoto will see them as two separate shots.

IPod (old 5th Generation) not detected by itunes, not detected by PC in disk drive mode and can't restore as well. I don't have files backup as PC crashed. Any help fixing or atleast recovering files???

I have this iPod with all my wife's songs and she lost her PC as it crashed. I can't update anything on this iPod as my iTunes is not detecting. I can't make it work as disk drive mode.
I need help. It freezes up during play mode - annoying!!
We went to Apple store to get it fix and they said try online software or something. We said we'll buy new one if needed!!!
Any help?

Thanks for the information.
Retracts: 16
Reallocs: 15
Pending Sectors: 11
PowerOn Hours: 152
Start/Stops: 19204
Temp: Current -
Temp: Min -
Temp: Max -
I tried to do chkdsk but it didnt run anything on DOS.
iTune aske me to formate it or restore it.
What are my options? If Formate/Restore - Will I lose all my data?

IPod appears on Desktop - enable disk use checked, greyed-out

Each of my daughters has a video iPod--
The "white" one - about 11 months old, now appears on the desktop when connected. iTunes opens, but the choice "enable disk use" is greyed-out, i.e. I cannot un-check this, and each time the iPod icon appears on the desktop.
The "black" iPod-- just a few days old, but essentially the same video iPod-- it does NOT appear on the desktop, and the "enable disk use" writing is NOT greyed-out, i.e. we could "check" this if we wanted.
How to get the "white" iPod to no longer appear on the desktop? I have tried resetting it, but that doesn't seem to change anything.
Also-- is there a reason why this appears on the desktop, and is that a limiting factor for any reason-- or a problem? Really just trying to understand this!
Thanks for any comments.
Steve
Wednesday 30 May 2007

If the iPod is set to sync manually, the enable disk use checkbox will always be on, as iTunes doesn't know when you will be done transferring content to the iPod and ready to unplug it. The iPod will appear on a Mac's desktop while iTunes is syncing it or waiting for you to transfer content to it, or when disk use is explicitly enabled and the iPod is plugged in to the computer.
(21931)

Disk use and name of ipod

How do you enable your ipod for disk use on a mac? Where do you go to see the name of your ipo?

To enable an iPod for disk usage on a Mac, open the iPod options dialog in iTunes and check the box "Enable Disk Use." You can see and change an iPod's name from the iTunes source list, or by putting it into Disk Mode and looking at its icon in the Finder.
(8629)

Enable disk use on Classic?

My computer went to computer heaven with all its data and applications. I have set up a new computer and would like to sync the 9,000 items on my iPod Classic to iTunes. Unfortunately, it insists that it wants to wipe my iPod clean. Nearly all of the content on the iPod consists of my 600+ CD collection, which I fed, one by one, into iTunes.
The third party software I have found that promises to reconstitute my iTunes Library requires me to enable disk use for my iPod, but I can't find a way to do that. Help?

Summarizing if you don't like to read Instructions and manual.
Sandy, if you dont want to put the iPod in Disk Mode, and use ity as a portable hardisk, but just asking about
the function or benefit of "Enable Disk use"
Normally if I want to add just a song or two from my library or playlist to iPod, I would put the iPod in
Manually Manage,
then ensure that enable disk use is tick
Drag the song/s from the library to the iPod icon or playlist.
So retaining all the songs in the iPod, this is much faster than Sync, and dont give problem like timeout and freezing iTunes.
Have a nice day!

ITunes has detected an iPod in recovery mode, constantly comes up

I was listening to my iPod when all of a sudden, when I went to skip to the next song, it just went to the next song, but would not play. I would press the play button, the play arrow would be displayed, yet no playback started. At this point, I did a reset, pressing and holding the menu + select until the apple logo appeared. I then got the sccreen showing the usb cable wiith the mesage "connect to iTunes to restore". I then connected it to computer running the latest version of iTunes. iTunes displayed the message "iTunes has detected an iPod in recovery mode. You must restore this iPod before it can be used with iTunes". I click OK to close this window and at the iTunes main screen, select the 'restore' button. The message comes up "are you sure you want to restore...", I then selected Restore. The "Extracting software" message followed by the "restoring ipod" message came up. It then said the iPod was restored and is restarting. On the iPod, the apple logo comes up then the screen flashes white and then the screen showing the usb cable with the mesage "connect to iTunes to restore" reappears. it seems to be stuck in this loop. I changed the drive letter assigned to the iPod but that didn't make a difference. A couple months ago, I had a similiar issue where I got the message about the iPod being corrupted and I restored it and that worked fine and all was fine with the iPod after. Is this a indication of some kind of intermittant hardware problem? Has anyone else had the same issues? Any suggestions as to how to get this to work and what may have gone wrong why all of a sudden I had playback issues in the beginning? I don't know if this is coincidence or not, but I had some videos on it that I recorded earlier in the day. The time I had the corruption problem a couple of months ago, I had some video recorded on it also.

Well, I finally got my iPod formatted and restored. I had problems on my windows XP computer in that I couldn't get the iPod formatted in Windows nor would iTunes get out of the "iPod in recovery mode" loop after numerous restore attempts.
I did the following on my Windows Vista computer and was able to finally get the iPod to work:
I first tried the iPod in iTunes to attempt a restore but got the same "iTunes has detected an iPod in recovery mode" error message.
After exiting iTunes, I did a format of the iPod in Windows as follows: FAT32, cluster size 8 KB, and did a "Quick" format. Format was successful this time. Disconnected the iPod using "safely remove hardware".
Then, restarted iTunes and reconnected the iPod. This time I was able to do a restore, name the iPod and set sync preferences and sync files to the nano.

Downloading new software put my ipod in recovery mode.

i downloaded the new itunes and it put my ipod into recovery mode saying the only thing i can do is restore it. did this happen to anyone else?
how can i fix it without restoring it. Cant find answers anywhere.

Hi...
How to place an iPod in recovery mode here.

TS1930 Hi All, I'm using iTunes 10.6.3.25 and i don't see the option of "Enable disk use" here so can someone kindly help me in copying the videos from my iPod Touch to my PC, Thank you.

Hi All, I'm using iTunes 10.6.3.25 and i don't see the option of "Enable disk use" here so can someone kindly help me in copying the videos from my iPod Touch to my PC, Thank you.

There is no enable disk use option for iOS Devices. See this article for instructions on copying videos and photos from your iOS device to your PC.
iOS: Importing personal photos and videos from iOS devices to your computer
B-rock

I am using ITUNES 11 on Win 7 64 bit. I can download podcasts to my IPOD touch just fine but when I click on the ITUNES store I get an error message that stays "ITUNES has stopped working". How do I trouble shoot or fix this? Thanks

I am using ITUNES 11 on Win 7 64 bit. I can download podcasts to my IPOD touch just fine but when I click on the ITUNES store I get an error message that stays "ITUNES has stopped working". How do I trouble shoot or fix this? Thanks

Try gn_id's suggestion from the following post:
Re: iTunes 11 crashes when opening the store - no error message

ITunes no longer recognizes iPod after "Enable Disk Use"

I enabled the disk use on my iPod and now iTunes won't recognize it, meaning it doesn't appear in the source window and I can't disable the disk use and sync. The iPod only appears in the device manager as a USB storage device, but not in My Computer; the iPod flashes Do Not Disconnect. I've tried the 5 rs. Any advice/wisdom, anyone? Thanks.

In Device Manager, change the drive letter of the device, use M.

How can I uncheck "Enable disk use" in iTunes for my iPod? The option is grayed out, and permanently checked.

When I plug in my iPod Nano (6th generation) and launch iTunes, the device appears in the sidebar as normal, but the option to check or uncheck "Enable Disk use" in the Summary pane for the iPod is grayed out. Currently, the box is checked, so "Enable disk use " is turned on -- but what I want to do is UNcheck it and turn it off.
But nothing I've tried so far has successfully ungrayed the "Enable disk use" box. Help!
Question: How can I ungrey the "Enable disk use" option in my iPod's Summary panel in iTunes, allowing me to uncheck it?
Alternately, is there any other way to turn off "Enable disk use," using some esoteric workaround? Thanks!

Set it to sync automatically. Disabling that option isn't possible for an iPod set to sync manually, as it shows up as a disk as part of the sync process, and iTunes has no way of knowing when you're done syncing an iPod set to do so manually.
(59725)

Can't find 'Enable Disk Use' with iTunes 9 on my iPod Touch

I have a 1st generation iPod Touch, and need to enable disk use, but can no longer find the option in iTunes 9! Can somebody please tell me how to do this? Thanks.
EDIT: Just found out that the iPod touch doesn't support disk use... Although I've found a hack that makes it work, Thanks anyway.
Message was edited by: johnthompson1993

You just be looking at instructions for the older iPods. None of the iOS devices such as the iPod touch have ever supported disk use. There are third-party utilities that purport to provide workarounds to allow such use, but I have no experience with any of them so I can't make any recommendations.
Regards.

ITunes won't allow disk use of Reset iPod

I'm using a 40Gb click-wheel iPod for music and as a hard disk for file transfer, which has behaved fine up until now.
Just recently it took to skipping through Audio Books so I plugged it into my computer, up comes iTunes (latest version) and I hit Reset - iPod is reset, all the music loaded back onto it, but now when you set iPod options within iTunes they're not remembered.
I want to turn off auto-boot of iTunes with iPod detection, and turn on disk use. When I make these changes, iTunes takes ages to close, and when its re-opened the changes are not made.
Help would be greatly appreciated
jON

The tracks are not eligible for icloud; they are personally recorded lectures. If I try to manually add them to a playlist I get the warning about the playlist being removed from icloud and only available on my computer. Is this what I need to do in order to have both my recorded lectures and the rest of my library in itunes match?
unsure of bit rate...but tracks are not in the cloud.
Thanks Jim
Dave

ITunes 8.1 (Win) + 5G iPod: disk use mode now always on

Similar Messages

Maybe you are looking for