Itunes and windows ( 8 ) are not recognizing my iphone 4s ios 7
i'm connecting my iphone to my computer windows 8 and it doesn't recognize it, it says it's a usb error, and also the battery charger dosn't work anymore
please help me
Hi lucafromve,
Thanks for visiting Apple Support Communities.
The steps in our iPhone assistant can help if iTunes for Windows is not recognizing your iPhone:
http://www.apple.com/support/iphone/assistant/itunes/
Regards,
Jeremy
Similar Messages
-
Windows 8.1 and updated iTunes. My devices are not recognized.
Windows 8.1 and updated iTunes. My devices are not recognized. Uninstalled and reinstalled iTunes and the AMDS isn't installed. Extracted the setup files and ran the AppleMobileSupport64.msi but the install states my system is not configured....
Apple Mobile Device Support wasn't installed on your computer.
The installer encountered errors before Apple Mobile Device Support could be configured.
Your system has not been modified. To retry these operations at a later time, please run the installer again. -
"An iPod has been detected but it could not be identified properly" iPod Nano 7g and 3g won't work with Windows 8 PC. worked fine up until a month or so ago and now they are not recognized.
Hi cueball819,
Thanks for using Apple Support Communities. This article has steps to try if your iPods aren't recognized by iTunes or Windows:
iPod not recognized in My Computer and in iTunes for Windows
http://support.apple.com/kb/TS1369
Cheers,
- Ari -
Itunes (on a pc) is not recognizing my iphone
itunes (on a pc) is not recognizing my iphone. When I plug my phone into the computer itunes opens but it is not reading my iphone
Try the troubleshooting tips here: iOS: Device not recognized in iTunes for Windows
Start by making sure that Apple Mobile Device Service is still active : iPhone and iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows XP and Vista -
My I phone and I pad are not recognized by I tunes anylonger. Why? Waht to do?
My I phone and my I pad are not recognized by I tunes anylonger (it used to be, I do not know waht happened). Why? What to do?
Help, please.Hello Dora Lucia,
Thank you for using Apple Support Communities.
For more information, take a look at:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
1. Update iTunes
2. Check the USB cable
3. Verify that Apple Mobile Device Support is installed
4. Restart the Apple Mobile Device Service
5. Verify that the Apple Mobile Device USB Driver is installed
6. Check for third-party software conflicts
Have a nice day,
Mario -
Why New-SPConfigurationDatabase and other commands are not recognized?
Hello Community
In Sharepoint 2013 Server I am an Administrator and in
SQL Server 2012 I am a securityadmin, db_owner and sysadmin. In the
I am also a domain user and domain administrator.
Below is what is returned from the Powershell command I entered:
PS C:\> $PSVersionTable.psversion
Major Minor Build Revision
3 0 -1 -1
I am running WS2012 and the prerequisites for Sharepoint 2013 Server have been installed.
However when I run the Powershell script to configure the
New-SharepointFarm the command fails with all of the Powershell
commands returning the following error message:
PS C:\scripts> .\New-SharePointFarm.ps1
Configure Database
New-SPConfigurationDatabase : The term 'New-SPConfigurationDatabase' is not recognized as the name of a cmdlet,
function, script file, or operable program. Check the spelling of the name, or if a path was included, verify that the
path is correct and try again.
At C:\scripts\New-SharePointFarm.ps1:20 char:1
+ New-SPConfigurationDatabase -DatabaseName $ConfigDB -DatabaseServer $DatabaseSer ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : ObjectNotFound: (New-SPConfigurationDatabase:String) [], CommandNotFoundException
+ FullyQualifiedErrorId : CommandNotFoundException
As you can see the error says: "The term 'New-SPConfigurationDatabase' is not recognized as the name of a cmdlet"
but as you can see $PSVersionTable.psversion shows the Powershell version I am using so my question is:
How come when I run commands like "New-SPConfigurationDatabase" they are not recognized?
Thank you
ShabeautHello Alex
I should have included that while troubleshooting I did that too.
The results of "Add-PSSnapin Microsoft.SharePoint.PowerShell" were:
Add-PSSnapin : No snap-ins have been registered for Windows PowerShell version 3
and if I try to run .\New-SharePointFarm.ps1 again I get the same error:
The term 'New-SPConfigurationDatabase' is not recognized as the name of a cmdlet,
Shabeaut -
My messages get lost in an eternal loop in my out box and it says that my iCloud me accounts are not recognized by the server. I can send 1 or 2 out of 10.
We tried adding a new account and that didn't work. We then deleted the account and started again. Still didn't work. Extremely frustrated!There also seems to be something wrong with the time!!! My posting says 5:30ish but it was 8:30ish?
-
ITunes 11.1.4 is not recognizing my iPhone 4s
For some reason my iTunes is not recognizing my iPhone 4s. I've reloaded Itunes. Not sure what else to do?
Hi Cameraman1970,
Welcome to the Support Communities!
Are you working with a Mac or a PC? Below are a couple of articles that may help if you are working with iTunes for Windows:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
If the issue is not resolved, you may need to uninstall iTunes and all of it's components, and reinstall the latest version as explained in this article:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
- Judy -
Upgraded to IOS 8 and now documents are not syncing from mac to IOS devices
Hello,
I upgraded to IOS 8 on iPhone 5 and iPad 2 and now documents are not syncing from the mac to IOS devices.
How can restore document sharing functions to the iCloud pre-IPOS 8?
Thank you
DonOkay, so we're moving forward now. no problem. while waiting for a response I noticed that both NUMBERS and PAGES sync-ed to the iCloud on iphone5. However, I am still waiting for the iPad to sync. post IOS8. Should I go get a cup of coffee or is there a way to expedite the sync process?
don -
Good, thank you in advance for help. My Iphone 5 agency was left red battery and asked me a software update from settings, the update could not begin, I think, because there was no connection. I turned off the device to get to recharge my house and arrest him and get me a stick in red appeared and requested connection and immediately connected it via the USB cable to the PC, Windows Vista, and no progress bar. However, the update Itunes asked me again and I put it to update. It lasted 84 minutes, but after the update, the iPhone does not recognize Itunes, and reload the pc or the USB cable or with direct current charger (connector Apple). No reboots, no catches, no sign of anything. Please help I do not know what I can do. Yesterday I went to an agency of the company and was told that if I put the phone to update and it was the battery I should take it to an authorized Apple Software I restored. I have searched and have not found tutorials how to update the software or relive the Iphone. I'm desperate and I can say that for the first time in my life, I doubt Apple continue or happen to competition. Please help me.
With iTunes open connect iPhone to the PC. In the Top Menu of iTunes at the end select Help, scroll down to near bottom, select "Run Diagnositics..." Perform all the simple tests and follow the help.
-
Music and Video's are not recognized on the iphone post update on 9/26
Hello everyone,
A couple days I did the iphone update that allowed me to send picture texts etc. After that, when I attempted to play music it said that there was no music content. In addition, when I tried to sync up the phone with itunes it didn't recognize it as a song/video file so I couldn't simply remove and reload (the file was recognized as "other" and took up all the size of the video's/music on the hard drive.
Anyone else have this problem? and/or know how to fix it?I'm no Apple expert, just ran into this problem myself.
Solution:
1) Before you can transfer the purchases you need to Authorise the computer (do this from the Store menu)
2) Once the computer is authorised, then you can transfer the purchases (File->Devices->Transfer...)
User Experience comments for Apple:
3) Hiding the menu bar is plain stupid and ruins the User Experience. I've been fighting iTunes for weeks and only now have I found it. How useful. This really is not clever or smart. It's amazingly dumb. Frustratingly this is like the rubbish Microsoft is now doing with Vista/7 and moreso with Windows 8.
Repeat after me: Hiding menus does not help the user of the software.
4) The warning when you try to update is useful in that it stops you losing data but useless in that it doesn't tell you (in sensible, non-expert language) how to do this. It really should have either:
a) A help button taking you to an explanation of the problem
b) A "transfter these files for me button" that takes you through all the necessary steps, including authorising the computer if need be.
I'm gobsmacked that I'm advising Apple on User Experience issues, but there you go. -
ITunes and my iPod are not syncing
I'm having a few problems with iTunes and my iPod right now. I have the Classic 160GB if that makes any difference.
The laptop my original iTunes library was on died. I tried transferring all the songs off my iPod to the new computer. When I transferred only the purchased songs are showing in the library. The songs I uploaded from CDs are only showing on my iPod.
2. I purchased several songs about 2 weeks ago and they will not sync to my iPod; they are only showing in the library. Which leads me into my 3rd problem.
3. For some reason, the sync songs manually option is checked, and when I uncheck it I get a message that says if I continue the contents on my iPod will be replaced with the current contents of the library. (I don't not want this to happen.) Also, when I go to the summary of my iPod and click the music tab and try to sync that way, I get the same message about replacing contents with current library.
Thanks to anyone that can provide any help!is your other computer still operational?if it is,do you have a wirless internet connection,or just a modem?
Message was edited by: fedex911 -
I'm running Windows 7, 64 bits and I suddenly encountered this problem, apparently none of these basic Windows things are working, I can't turn them on in anyway I've tried, and apparently I have no viruses in my computer. Has anyone encountered the same
problem? What could it be? Help please @_@Hi,
It seems like system components corrupt, is there any error message when these tools doesn't work?
Please check Event Viewer if it identify this problem.
In addition, please try to use SFC /Scannow command to fix system file for test.
Roger Lu
TechNet Community Support -
Itunes on windows vista doesn't recognized my iphone
First of all I am having issues with even getting iTunes on my computer but when I did have it on it when I connected my phone to sync it it didn't even recognized my phone. Why is that?
See this support document for trouble with getting your iPhone recognized by iTunes. iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support
-
ITunes on windows 8 will not recognize my iPhone 4
iTunes doesn't recognize my iPhone 4 on windows 8
Hello Zacharey,
I understand that your iPhone 4 is not recognized by iTunes. The following article may help to resolve your issue:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Thanks,
Matt M.
Maybe you are looking for
-
How to collect debug logs for custom module only in EBS by AppsLog.write?
Hi, Customer is trying to retrieve logs for their custom module (XXKCZ) and put it to /log/kcz.log by using AppsLog.write() method. (refer to sample code below) Customer has set these profile values in the application level and removed the values in
-
Change background color of alternating rows in listview
Hi all, Does anyone know how to change the background color of alternating rows in a listview in Visual Basic 2013? Best regards, Randy Boulter
-
I'm a flex noob and have been stuck on this one problem for hours and still haven't found a solution - any suggestions? My application includes a custom component (canvas container with 10 comboboxes). I populate each of the comboboxes with data I co
-
Tour shuts down after a period of time have to plug into charger for reboot
Today I noticed that my phone will shut off after a little while of inactivity. The battery will be mostly full, and it thinks it dies. So inorder to reboot you must plug it into the charger. Once you plug it into the charger you get the image of
-
Hey guys. I have a T500 and another person wants it more than I do so I was thinking of giving to to him with a install of 8 Pro, That is not the question though. My question is if I uninstall some of the T500 only drivers and put the SSD in the T410