ITunes broke. Read this if you want a troubleshooting challenge.

First iTunes edited my track numbers on random songs. For example, track 1 of 12. iTunes edited it to be 1 out of "blank". Not 1 of 12. Next iTunes would not play a few albums. So I removed the unplayable albums and tried to re-add them. Well iTunes is broke because nothing happens when I try to re-add the album. Nothing. It won't add. I downloaded Zune and it adds the album just fine. So. If I add salt to my food the salt isn't added? Where is the logic here? Help please.

I agree with turingtest2 to take a first look at WMP.
About 800 of my files were wretchedly changed with that track "x of y" with the y becoming blank. Also a lot of Album Artist and Composer field were nicely updated without my approval, thanks not alot.
It happened around the time I upgraded WMP. I forget now why I upgraded - I had been resistant.
There are now TWO default places that tell WMP to automatically update files from the internet:
library tab
privacy tab
I am still not 100% sure that WMP caused it. But it did seem to happen on random days that I went into WMP to check something ( not exactly sure of the dates but it was like 200 files got whacked one day in early July, another 300 files got whacked later in July, etc), and it happened to random files that I hadn't +touched or played in itunes for years+.
I also cleared out my WMP library, turned off the option to have itunes organize my files, and it has not been seen since.
Message was edited by: Katrina S.

Similar Messages

Read this if you want to replace your CD/DVD

The best replacement is the Pioneer DVR-110blk (the blk stand for black), it writes 56x CD-R, CDRW, DVD-R, 16x DVD+R, 16x Dual Layer & DVD-RAM.
It is recognised by OSX 10.4 & works best using the latest Roxio Toast ( it also recognised by itunes & can be used in iDVD using a small program called patchburn - http://www.patchburn.de/ )
To install the drives use this guide:
http://www.xlr8yourmac.com/systems/iMacg4/imacg4takeapart.html
The reason I recommend this drive is that it is very reliable & fast - I have burnt DVD's (2gb-4gb) in 2-4 minutes. It is also quite easy to make it region free by using a program called DVRFlash & new region free firmware - discussion & downloads can be found here:
http://forum.rpc1.org/viewforum.php?f=30
So for about £35 (www.dabs.com) you do truly get a Superdrive.
PS You need a Philips screwdriver, Torx screwdriver & Thermal Grease!
iMac G4 800mhz 17" 1GB ram Mac OS X (10.4.3)

Hey PROvider,
What is the difference in the DVR-110D, and the DVR-110 ? Isn't the DVR-110DBK the same as the DVR-110D except its black and not beige?
Also, on this site: http://eshop.macsales.com/shop/optical-drives/superdrives/powermac/
It lists the DVR-110D & DVR-110DBK as writing 40X CD, 16X DVD, and 8X DVD-DL. You mentioned 56X CD and 16X DVD & DVD-DL.
Is the DVR-110BK (the one you mentioned) different than the DVR-110DBK and why do you recommend the black over the beige?
Thanks,
Tyler

HT2736 How do you remove any remaining gift certificate credit from your itunes account as one is prompted to do this if you want to change your country or region?

How do you remove any remaining gift certificate credit from your itunes account as one is prompted to do this if you want to change your country or region?

Please supply answers that do not refer me to contacting support.

When I plug in my iphone 4S to my 64-bit computer a error box comes up in my 64-bit itunes that reads (This iphone cannot be used because the required software is not installed. Run the Itunes installer to remove itunes, than install the 64-bit version of

When I plug in my iphone 4S to my 64-bit computer a error box comes up in my 64-bit itunes that reads (This iphone cannot be used because the required software is not installed. Run the Itunes installer to remove itunes, than install the 64-bit version of itines.) This just started a few weeks ago. I've done a system restore on my computer, deleated and reinstalled the 64-bit itunes several times, did a registery clean, rebooted. Nothing seems to work it will not pick up my phone.

Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
(If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
Does it install (or uninstall and then reinstall) properly for you? If so, can you get a normal iTunes install to go through properly now?
If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.)

Read this if you can't hear callers or voicemail o...

If you can no longer hear callers, cannot hear your voicemail, and are tearing your hair out trying to get any help from the obvious sources (your service provider, Nokia, your local store) - do not panic.
Call 121, as if you are making a vm call. While it is connecting, adjust the volume control button on the right of the phone. You will find that this volume control button operates on a 1-10 scale and is completely different from the one that is normally adjustable from the main screen, which operates on a 1-30 scale. Hopefully you will start to hear the recorded voice and all will be well.
This is not mentioned anywhere in the handbook or any of the online resources. I eventually found a clue via a different help site - but couldn't find where the 2nd volume control was. Thank goodness I eventually stumbled upon it by accident.
I know I am not the only one to have lost connection with a caller half-way through a conversation. It must be a design fault of some sort. I am just relieved that I did not follow the Nokia diagnostics advice to reset my phone to factory settings (after backing up etc etc), or pay out vast ££s for the privilege of sending off my phone for a non-existent repair.
I am not techy - but I am posting this in the hope that it will save others the frustration, expense and time I have wasted over the past 3 days trying to get any sense out of Vodafone and Nokia. (I am sorry if that breaches some form of discussion board protocol - but it is a fact.)
If anyone from Nokia is reading this will you PLEASE update your handbooks to include this information, and take account of it within your online diagnostics page, which told me to restore factory settings. (Fortunately I have no idea how to backup data on my phone, and the advice didn't tell me either.)
If anyone from Vodafone is reading this, will you PLEASE train your sales staff and helpdesk staff to understand this problem.
Feeling calmer now ... off to make a large mug of coffee.

This is normal an also the same with other phone brands and OS. Even on android and IOS the call volume is different from the general volume of the phone. If you have a non-lumia nokia phone, it is also the same.

ITunes no longers asks "Do you want to keep the original file or move to trash?" - Can this be fixed?

I'm not sure if this was a recent update in Mavericks, but when I used to delete items from iTunes it would ask something along the lines of:
Do you want to keep the original file or move to trash?
Now I no longer get this, instead iTunes asks:
Are you sure you want to delete the selected song from your iTunes library?
After which, if you choose the option "Delete Song", you get no option to keep the original file, it just straight up deletes if from my library and hard drive. Does anyone know if there is a way around this? For whatever reason, I want to be able to keep the original file on my Mac, without keeping it in my iTunes library.
I've tried resetting dialogue warning, and this hasn't made a difference.
Thanks!

iTunes prefs > Advanced > Reset all dialog warnings. - https://discussions.apple.com/message/23987276
Resetting iTunes Store warnings - http://support.apple.com/kb/HT1734

Dont read this if you dont want to make money

MAKE LOTS OF MONEY QUICKLY, GUARANTEED 100%, NO SCAM!
Turn 6.00 into 42,000! This is true!!.... Read this carefully to find out how!!....
READING THIS WILL CHANGE YOUR LIFE!
I found this on a bulletin board and decided to try it. A little while back, I was browsing
through newsgroups, and came across an article similar to this that said you could make thousands
of cash within weeks with only an initial investment of .00! So I thought, "Yeah right, this<br />
must be a scam", but like most of us, I was curious, so I kept reading.
Before you get skeptical, just take a few minutes to finish reading.
HERE'S HOW IT WORKS
WITH THIS PLAN, YOU REALLY CAN MAKE TONS OF TOTALLY LEGAL, FAST AND EASY CASH MONEY!! IT WORKS!!!
BUT YOU HAVE TO FOLLOW IT CAREFULLY FOR IT TO WORK CORRECTLY AND IN YOUR FAVOR!!!! WITH ALL
THE MONEY YOU ARE GONNA MAKE, YOU WILL SOON GET EVERYTHING YOU'VE ALWAYS DREAMED OF!!!!
ALL YOU DO IS...
All you do is send $1.00 to each of the 6 names and address stated in the article. You then
place your own name and address in the bottom of the list at #6, and post the article in at
least 200 newsgroups. (There are thousands.) No catch, that was it . So after thinking it over,
and talking to a few people first, I thought about trying it. I figured, what have I got to
lose except 6 stamps and 6.00, right? Like most of us I was a little skeptical and a little
worried about the legal aspects of it
all. So I checked it out with the U.S. Post Office (1-800-725-2161) and they confirmed that
it is indeed legal!
AND THEN GUESS WHAT...
Then I invested the measly 6.00. Well, GUESS WHAT!!... Within 7 days, I started getting money
just kept coming in. In my first week, I made about 25. By the end of the second week I had
made a total of over 1,000! In the third week I had over 10,000 and it's still growing. This
is now my fourth week and I have made a total of just over 42000, and it's still coming in
rapidly. It's certainly worth 6. and 6 stamps. By the way, I have spent more than that on the
lottery in the last month!! Let me tell
you how this works and most importantly, why it works.... also, make sure you print a copy of
this article NOW, So you can get the information off of it, as you need it.
SO LET'S GET STARTED AND SEE WHAT HAPPENS
STEP 1:
Get 6 separate pieces of paper and write the following on eash piece of paper, "PLEASE PUT MY<br />
NAME ON YOUR MAILING LIST." Also, be sure to include your name and address. Now, get 6 U.S.
$1.00 bills and place ONE inside EACH of the 6 pieces of paper so the bill will not be seen
through the envelope, to prevent thievery. Next, place one paper in each of the 6 envelopes
and seal them. You should now have 6 sealed envelopes, each with a piece of paper stating the
above phrase, your name and address email
, and a $1.00 bill. What you are doing is creating a service by this. THIS IS ABSOLUTELY LEGAL!
STEP 2 :
Mail the 6 envelopes to the following addresses:
#1 Randall Hines 22 Stature Dr. Newark DE 19713
#2 Mike Sharrer 921 West State St. Coopersburg PA 18036
#3 Travis Montgomery 2211 Elmers Lane Norfolk NE 68701
#4 James Adair the third 22 Over Rd. Feasterville PA 19053
#5 Michael Lescault 123 Rhode Island Ave. Pawtucket, RI. 02860
#6 Michael Hendrock 106 S.academy St. Lodi, Ohio 44254
STEP 3:
Now take the #1 name off the list that you see above, move the other names up (6 becomes 5,
5 becomes 4, etc.) and add YOUR Name as number 6 on the list.
STEP 4:
Change anything you need to, but try to keep this article as close to original as possible.
If you do not live in the U.S. or there is a foreign address, you must put an international
stamp on your envelopes. Now, post your amended article to at least 200 newsgroups. ( I think
there are close to 24,000 groups in all.) All you need is 200, but remember, the more you post,
the more money you make!!
DIRECTIONS FOR POSTING TO NEWSGROUP BULLETINS
STEP 1: You do not need to re-type this entire letter to do your own posting. Simply put you
cursor at the beginning of this letter and drag your cursor to the bottom of this letter. Then
select 'copy' from the edit menu.
This will copy the entire letter into the computer's temporary memory.
STEP 2: Open a blank 'notepad' or word processor file and place your cursor at the top of the
blank page. From the 'edit' menu select 'paste'. This will paste a copy of the letter into
notepad so that you can add your name to the list.
STEP 3: Save your new notepad file as a *.txt file. If you want to do your postings in different
sittings, you'll always have this file to fo back to.
STEP 4: Use your Internet provider and search engines to find various newsgroups (on-line forums,
message boards, chat sites, discussions).
STEP 5: Visit these message boards and post this article as a new message by higlighting the
text of this letter and selecting paste from the edit menu. Fill in the Subject, and this will
be the header that everyone sees as they scroll through the list of postings in a particular
group. Then click the post message button. You're done with your first one!
Congratulations...
THAT'S IT! All you have to do is jump to different newsgroups and post away. After you get the
hang of it, it will only take about 30 seconds for each posting!!
** REMEMBER, THE MORE NEWSGROUPS YOU POST IN, THE MORE MONEY YOU WILL MAKE!! ----BUT YOU HAVE
TO POST A MINIMUM OF 200**----- That's it!
You will begin receiving money from around the world within days! You may eventually want to
rent a P.O. Box due to the large amount of mail you will receive. If you wish to stay anonymous,
you can invent a name to use , as long as the postal service will deliver it.
JUST MAKE SURE ALL THE ADDRESSES ARE CORRECT
WITH 200 POSTINGS
Out of 200 postings, say I receive only 5 replies ( a very low example). So then I made 5.00
with my name at #6 on the letter. Now, each of the 5 persons who just sent me $1.00 make the
MINIMUM 200 postings, each with my name at #5, and only 5 persons repond to each of the original
5, that is another 25. Then those 25 each make 200 MINIMUM posts with my name at #4, and only
5 relies to each, and I will bring in an additional125! Now, those 125 persons turn around
and post the MINIMUM 200 with my
name at #3 and only receive 5 replies each, and I will make an additional 625! OK, now here
is the fun part... Each of those 625 persons post a MINIMUM 200 letters with my name at #2,
and they each only receive 5 replies, that just made me 3125!!! Those 3,125 persons will all
deliver this message to 200 newsgroups with my name at #1, and if still 5 persons per 200 newsgroups
react, I will receive an amazing 15625!
With an original investment of only 6! AMAZING!
DO IT OVER AND OVER
When your name is no longer on the list, you just take the latest posting in the newsgroups,
and send out another 6 to names on the list, putting your name at #6 again. Then start posting
again. That's it! Do you realize that thousands of honest people just like you all over the
world are joining the Internet and reading these articles everday? So can you afford 6 and
see if it really works?? I think so..
People have said, "what if the plan is played out and no one sends you the money?" So what!
What are the chances of that happening when there are tons of new honest users who are joining
the Internet and newsgroups everyday? So, are you willing to give it a try? Estimates are about
20,000 to 50,000 new bulletin board users everyday, with thousands of those joining the Internet
itself. ---Remember please play FAIRLY! This ensures a huge circle of wealth that grows with
the Internet audience!!! Everyone
benefits!!! Remember To Send The Six Envelopes To The Above Addresses, In Order To Create The
Legal Service. At first I was scared to try this, but once I research it, I found that it is
totally legal. When you send the six envelopes out, you create a service, a legal service.
The Internet audience is expanding all the time. The audience is like an equity stock on the
stock market, continuously going up. If you still think this is a fraud, take a few minutes
to check it out, then.... you can start
raking in the
cash!!
THIS CAN WORK IF WE ARE ALL IN IT TOGETHER!!!!

What a pile of dreck !
ROTFLMAO
... to have so little to do, and so much time to do it in ...
that you crawl the web to paste such as this here,
and expect that anyone will actually believe you.
It violates the Terms of Use and the Code of Conduct that you agreed to when you registered.
Now, if the site Admin's had any initiative, they would summarily ban you, revoking your forum access, as is done in other Sun forums.

Read This BEFORE you update to iWeb '08

iWeb '08 introduces a lot of features that we've all been waiting for but, before you jump right in there, you should realize a lot of people are losing their original websites.
When you first launch iWeb '08 and upload an existing website it converts your domain.sites file to domain.sites2 file. Due to bugs in this software release, these converted files seem to be corrupted in various ways.
Once your domain.sites file has been converted there is no way back.
You MUST back them up.
If you want to continue working on your old sites you will have to retain your copy of iWeb '06. When you update to iWeb '08 your original application is replaced so, if you have not run the update, move your old iWeb application out of the "Applications" folder.
If you have already uploaded the new version and still have your iLife '06 disk then you are OK as long as you have made a "safe" backup of your original domain.sites file(s).
For more information on this subject go to
http://discussions.apple.com/thread.jspa?threadID=1079315&tstart=0

This is the only info available at MacFixIt...
http://www.macfixit.com/article.php?story=20070809114610523
Thursday, August 09 2007 @ 11:30 AM PDT
iWeb '08 Calamity: Lost site content, crashes, significantly increased resource usage, more
Backup your Domain files Make a copy of this file -- located in ~/Library/Application Support/iWeb/Domain -- before attempting to update to or use iWeb '08. The program is causing serious issues for a number of readers (as discussed below), and may delete or make inoperable parts of your stored Web site(s). Saving this file can mean the difference between losing or maintaining your current site data.
Missing site elements including photo galleries The most dire issue users are experiencing after updating to iWeb '08 is the sudden disappearance of various site elements, particularly photo galleries. Many users have reported that entire swaths of their sites are completely missing after launching the update and attempting to work with their pre-existing site(s) file.
Crashes A surprisingly high number of users are reporting repeated crashes after updating to iWeb '08.
Ironically, it appears that many of the crashes can be resolved by removing the file ~/Library/Application Support/iWeb/Domain. In essence, it looks like iWeb '08 is choking on the sites file created by older versions of iWeb. So move this file to a separate location, and try launching iWeb '08 again.
Increased resource usage/slowness Users are reporting that the new version of iWeb uses significantly more memory and processor time than its predecessor.

Has anyone ever lost a ringtone that they purchased and downloaded? I have; completely gone. And when I searched and attempted to download it again I got the message "you've already purchased this; do you want to purchase it again?"

Has anyone ever lost a ringtone that they purchased and downloaded a ringtone and then it just completely disappeared? When I tried to download it again I got the message "You've already purchased this item; are you sure you want to buy it again?"

You are aware that there the app may have downloaded and been placed on the second screen. Not the main one. Can you swipe to the right to see if it is there?

CMSS can cause for weird results. Please read this if you have surround issues

I'm a musician who frequently uses the Audio creation mode because this is the environment most optimal for creating music. For some time now, I've facing a certain problem where today, I finally found the solution about.
my problem
The problem I was having, is that some applications (they're optimised for stereo) played sound on my center speaker differently than those who use the windows 7 drivers. What happened in a nutshell, is that when I play sound in flash, the center speaker volume is about 3 times as loud as all the other speakers. Although this gives a nice and clear sound for presentations, this can be a pain when you want to listen to music.
my setup
For me, this is a bit awkward, because I have a big room where my speakers are positioned for my TV. My computer is next to my tv, but my center speaker is not in front of my pc monitor, but rather in front of my tv. Due to this, the right ear gets way more sound than my left one. Strangely enough, it weren't all the applications that had trouble with this. My music player plays everything equally throughout my speakers.
the mixer
The creative mixer (startup console) has several ways of tweaking this. Like assigning what channels to play if sound gets played through L/R, and their individual volume bars. You can guess it maybe. Changing these settings affected both applications differently. I could use the sliders to fix one, and then mess up the other. So when I went through all my settings I couldn't find what causes this.
CMSS is the fault here
I went reading this forum, and came to this post: http://forums.creative.com/t5/Sound-Blaster/How-to-enable-sound-for-my-center-rear-and-side-speakers-using/td-p/52 What gives, this option is not available when you are in Audiocreation mode. So it shouldn't affect my sound right? WRONG!
the problem
Even though you can't tweak the settings during audio creation mode, the settings are still in affect. So you have to switch to entertainment mode to access the CMSS-3D. I went there, and I had stereo enhancing surround enabled. When I changed that, it solved my problem. Since during audio creation, I mainly use stereo applications, I do not need surround enhancement.
my setup now
I turned it off, and as suspected, windows only parses sound to the left and right, not the other channels, even in audio creation mode. In the mixer, I have enabled output to all 7 channels I have for L/R output, and now the sound gets balanced to all my speakers. True, I get stereo sound over all the speakers, but when I want to use surround, I switch to the entertainment mode anyway.
Could a mod sticky this? I think its worth to have this stickied.

So my touchpad wasn't working and I have an HP dv6-6135dx. It started being messed up shortly after I took my PC apart to upgrade the screen. Sometimes it worked perfectly, sometimes it was completely unresponsive, sometimes the ring around the touchpad was lit, other times it wasn't etc.... It got worse and worse to the point where the touch pad almost never worked.
I followed this guide, and it didn't fix the problem; however, this got me thinking, and I pulled the keyboard out and reseated the touchpad cable where it connects right under there. BAM works perfectly. THANK YOU so much for this post, for some reason I didn't think to reseat the cable... I must have not plugged it back in completely when I took my laptop apart. You can find the service manual for the dv6t here Its in the first post

READ THIS if you use the observer APIs ...

This is just a heads up for developers who take advantage of
the observer APIs in Spry. For the next version of Spry I plan on
making the observer APIs for both the Data Set and the Dynamic
Region consistent.
Currently in Spry PR 1.1 the data set observer mechanism
requires that you register an object with an onDataChanged method
on it. This method is then called with a notification type
(Spry.Data.DataSet.ODC_*) which developers have to manually check
against and conditionally perform their action.
In Spry PR 1.1, the observer mechanism used for the dynamic
region requires that you register a callback function, which gets
passed a region state (Spry.Data.Region.RS_*) whenever it is
called, and it is up to the developer to check against the region
state and conditionally perform their action.
For the next release of Spry, I plan to move to the following
model:
- Both data set and region observer mechanisms will require
an object which defines notification methods for which it wants to
be notified for.
// Create an object with notification methods.
var myObserver = new Object;
myObserver.onDataChanged = function (notifier, data) {
alert("OnDataChanged called!"); };
// Register your object as an observer on the data set.
dsMyDataSet.addObserver(myObserver);
- Notification methods will all have the same signature:
function (notifier, data) {}
The notifier is the object that is dispatching the
notification, and the data is an object that will contain
information regarding the notification, where necessary, or
undefined if no additional data is necessary for the notification.
When called, the 'this' object within the notification method
will be the actual observer object.
- We will publish a list of notification methods that can be
defined on the observer object for both the data set and dynamic
region.
- *All* methods on the observer object are *OPTIONAL*, which
means you only have to define the notification methods that you
want to be called for. For example:
var observerA = new Object;
var observerB = new Object;
observerA.onDataChanged = function (notifier, data) {
alert("observerA.onDataChanged called!"); };
observerA.onSortChanged = function (notifier, data) {
alert("observerA.onSortChanged called!"); };
observerB.onDataChanged = function (notifier, data) {
alert("observerB.onDataChanged called!"); };
myDataSet.addObserver(observerA);
myDataSet.addObserver(observerB);
In the example above both observerA and observerB will be
called whenever the data changes, but only observerA will be
notified whenever a sort happens.
- Some events will have pre and post notifications. For
example onPreLoad(), onPostLoad(), onPreUpdate() and
onPostUpdate(), etc.
If you have any opinions, concerns or feedback on this. Now
would be the time to speak up.
--== Kin ==--

As one person who asked for this, I like what your planning.
Is that onPreLoad() an event that will get fired before an Ajax
request goes out for new data? Cuz I could really use that.
A tagentally related thought: Notifications are great, but in
some cases, I might want to control whether some behavior happens.
Say, perhaps I want to control whether the load actually happens.
In that case, I'd want a delegate object, which would have some
methods on it that could cancel the event that is going happen.
Just as an example:
var delegate = {
willFireLoad: function(...) { if (somecondition) return
false; else return true; },
unknownValueForKey: function(key, dataset) { ... return
dynamic value ... },
unknownValue_desc: "Description"
dataSet.setDelegate(delegate);
The first would allow me to stop the data from being loaded.
The second would allow me to return a value for a key that isn't
present in the dataset. And the third could be a way to hardcode a
value for the key 'desc'.
Just kinda an idea as far as what could be done, and I'm sure
there might be other control points too.
-d

Read this if you are looking for WhatsApp for Wind...

As you are here I guess you either heard of the removal of the app or are looking for it. WhatsApp have pulled the app as according to their info and a tweet from Microsoft's Joe Belfiore they found some (serious) issues with the app and felt they needed to pull it completely.
They are currently working with Microsoft to get an update out as quickly as possible but have not given any (estimated) release date information.
If you want to know more I'd suggest you contact WhatsApp HERE as they are currently the only ones who will know anything beyond what I posted above. There really is no point in asking here as we (as a user to user support forum) have no more information.
Click on the blue Star Icon below if my advice has helped you or press the 'Accept As Solution' link if I solved your problem..

WhatsApp has been updated and available again in the store..
Click on the blue Star Icon below if my advice has helped you or press the 'Accept As Solution' link if I solved your problem..

TS1717 Since i Updated to iTunes 11.0.1 i keep getting this "Do you want the application "iTunes.app" to accept incoming network connections?"

Hi all,
I have Just started to get the above message pop up since i updated to iTunes 11.0.1. I am running OSX 10.8.2 and its all up to date. I dont want to didable the firewall un less i have to. I have check to see if iTunes is in the list and it set to allow all in coming connections. Have tryed to re-install iTunes but still not joy dont really want tohave to re-install everything if there is an easy way to stop other than turning off my firewall
Many thanks
Gavin

Under your firewall options you can specify what apps to let through
It would probably been better to post this under iTunes for Mac instead of iTunes for Windows

Read this if you are having trouble burning CDs in itunes

Always X8 burn speed,
Old versions of Toast showed that was the highest for my old fully spec'd iMac.
A disc burner and CDRs might be up to x52 but the computer is rarely !!
Mine works at X52, but Im not so impatient that I need it at that
X8 always works and even with my Macs (see below)
I never go higher
A good way to check a burned CD is put it in a CD player, press play, then ffwd thru so you can hear it sped up, if there is any stuttering on the counter as it goes , Its been done too fast
If it forwards and the counter is smooth as it displays time, its fine
I store burning up so I can set stuff going while Im watching TV, not staring at the screen going "come on burn burn burn"
Then theres no need to rush and risk having a load of coasters

Good lord, Man! That's the long way around the block.
Highlight all the songs in the album. Right-click and select GET INFO.
Click on the album art in your web browser and drag it to the little box for Album Art in the Get Info dialog.
On rare occations I find Drag and Drop doesn't want to work - right click on the image in your web browser and select COPY - the PASTE in to the box in the GET INFO dialog.

Read this if you live in Alaska or you want an example of the worse customer service experience I have endured in years.

>> Duplicate post removed to comply with Verizon Wireless Terms of Service. See My Verizon Frustration (to put it mildly). Read if you live in AK <<
Message was edited by: Verizon Moderator

Just an update. I still haven't got it back (I leave the country in 4 days) and I asked for it to be returned over a week ago. Sent a email in last week (after calling and being told things would be sorted) Just going to ring up again and ask them what is happening now.

ITunes broke. Read this if you want a troubleshooting challenge.

Similar Messages

Maybe you are looking for