Itunes does not recognize ipad 2

When my PC and ipad2 are cinnecting via wifi at the same router in my house, which allows up to 5 connection, itunes does not see ipad2.
can you help?
dario

You can only connect your iPad to your computer's iTunes via the provided cable - you cannot sync content wirelessly from iTunes. You can do home sharing to your iPad via wifi, but not syncing iTunes content.

Similar Messages

  • ITunes does not recognize iPad due to "unknown error OxE80000565."  Does this mean anything to anyone?

    iTunes does not recognize iPad  due to "Unknown error OxE80000565."  Does this mean anything to anyone?

    Hello pyloric
    For that specific issue, check out the article below for the steps to walk you through to get your iPad talking to iTunes again.
    iOS: Unknown error containing '0xE' when connecting to a Windows PC
    http://support.apple.com/kb/TS3221
    Regards,
    -Norm G.

  • ITunes does not recognize ipad when connected

    When I connect my iPad to the computer, iTunes does not recognize the iPad.  I have had the iPad for several months now and have not had the issue.  I checked the cable with the charger and that works fine.  Went through what Apple suggested to no avail.  Any ideas?

    Did you try the steps contained in the attached link?  http://www.apple.com/support/ipad/assistant/itunes/

  • Itunes does not recognize IPAD 3 after upgrading to IOS 6.

    After updating my IPAD 3 to IOS 6, Itunes does not recognize my IPAD 3.  What can I do to fix this issue?

    I have a similar problem with the iPhone. Tried everything you can think of and then some. There is apparently some devastating bug 7.6 introduced into normal USB device recognition. I've been able to force the phone into recovery mode; the boot recovery USB driver does still work. Restoring the phone every time I need to sync is both scary and time-consuming.

  • Itunes does not recognize IPAD

    I have a new IPAD2 and when I connect it to my Home PC Itunes does not recognize it. It is recognized on my work PC. How can I fix?

    There is troubleshooting help here http://support.apple.com/kb/TS1538

  • After upgrading to 7.1 iTunes does not recognize iPad device

    I upgraded iPad to system 7.1.  I got a message to connect to my iMac and iTunes by my USB cable, which I did.
    iTunes no longer recognizes the iPad wirelessly and does not recognize it even when attached byUSB cable.
    My iPhone (4.2.1) is recognized by cable.
    Any suggestions?
    Bryan Davis

    Thank you, I tried uninstalling the device driver to reinstall again. After doing the scan for hardware changes, nothing flashes on the device manager. I dont see anything related to the IPAD or any other device for which driver shows unidentified device. It is as though the device is not being seen by the computer at all..
    I even tried flashing the home/sleep buttons together but that doesnt seem to identify any device either.
    Anything else I am missing?

  • PC does not recognize ipad; itunes does not recognize ipad

    Using itunes 10.2.1, iOS 4.3.1.  Cannot get itunes to recognize ipad.  Have reinstalled itunes many times.  Have gone into DFU on ipad many times.  Have played with usbaapl many times.  Out of ideas to fix.  Ready to frisbee ipad into street below.

    Hello I had a similar experience and searched and searched the forums until I came across this fix, I manually updated the apples drivers manually myself rather than letting windows find them,for me this worked. I tried everything in the book and I mean everything, as soon as I updated my itunes program to the newest version and tried to plug in my iphone my computer would not recognize my device nor would it show up in itunes, I don't know if this will help anyone else or if I have posted this in the right place but it worked for me, I did not have to disable any of my spyware or uninstall itunes just followed the instructions in the link below and pretso it worked, so far so good it is early days and I am yet to try my ipad 2 using this way so hopefully it will work I had the same problem with both devices on my computer after the new update...mine all came down to the drivers on my windows xp and the new update from itunes hope this helps someone else as well.
    http://support.apple.com/kb/ts1538
    I also followed a very old thread (sorry I can not find this thread anymore) from a few years ago that helped ....THANK YOU TO THE PERSON WHO POSTED IT YEARS AGO IN SOME FORUM
    I went to device manager and found my iphone in a heading under others generally it show up in the heading under usb controller if installed correctly (why it showed up here in the first place I have no idea, it was also showing iphone with a yellow question mark I then highlighted the iphone then clicked up the top of the screen to update drivers
    Welcome to hardware wizard pops up I clicked no not this time then next
    I choose to install from a specific location I then clicked on browse to find the file C:\ Program Files\Common Files\Apple\ Mobile Device Support Drivers then clicked next I waited 30 seconds before plugging my iphone back into my usb and presto  my phone showed up in itunes and on the computer by manually updating the drivers myself..Good Luck I really hope this helps someone else and if it does could we please pass the fix along as this drove me nuts for days....

  • IPAD 1 problems after ios 5.1.1 update, itunes does not recognize IPAD.. I check the device manager, it identifies an unknown device (My ipad) but unable to use it.

    I am using the generation 1 IPAD.
    I recently updated my ios from ios 4 to ios 5.1.1, I did the restore after the update and all seemed fine as it was detected the first time.
    I tried connecting the IPAD again but it shows that the computer, itunes is not able to detect the IPAD.
    I checked on the device manager, it identifies an unknown device (IPAD) and says no software for the driver. I am using windows 7 on my laptop. I never had any such problem with the iso 4. Any suggestions as to how this can be solved?
    Thanks,
    Vinay

    Thank you, I tried uninstalling the device driver to reinstall again. After doing the scan for hardware changes, nothing flashes on the device manager. I dont see anything related to the IPAD or any other device for which driver shows unidentified device. It is as though the device is not being seen by the computer at all..
    I even tried flashing the home/sleep buttons together but that doesnt seem to identify any device either.
    Anything else I am missing?

  • We just added a new printer and bluetooth connection to our iMac.  Now iTunes does not recognize our iPads as devices.  Have already tried restarting everything.  Any other suggestions?

    We just added a new printer and bluetooth connection to our iMac.  Now iTunes does not recognize our iPads as devices.  Have already tried restarting everything.  Any other suggestions?

    You can try the steps recommended here: http://www.apple.com/support/ipad/assistant/itunes/

  • ITunes does not recognize password on iMac, but I can sign in to post here, sign in on my iPad, and sync my iPad to my iMac

    If I want to sign in to this message board, I can do so.  I can also sign in on my iPad to download updates, purchase new apps and songs, etc.  And I can sync my iPad to iTunes on my iMac.
    But when I open iTunes on my iMac, it asks for my password and I can't sign in.  What is causing this problem with iTunes on my iMac repeatedly asking for my password when I open iTunes?
    This is very frustrating.  I am also worried that I won't be able to sync when my new iPad arrives March 16.  Help!

    The solution (for me at least) is to keep trying the same password in iTunes on my iMac that I know is correct.  For me, the fourth try of typing in the exact same password works in iTunes on my iMac.  I have repeated this several times, and each time it works.
    What is messing people up is that when iTunes does not recognize the correct password, people are attempting other passwords.  Those other passwords are all incorrect.  The problem, as you stated, is that the password was entered correctly the first time but because of iTunes having issues it does not recognize it.
    People, just keep entering the password you know is correct.  It will eventually recognize it, or at least this works for me.  If this still does not work, reset your password (but then you may still have to enter it repeatedly in iTunes). 
    Apple needs to fix this.

  • ITunes does not recognize my iPhone 4 or iPad 2

    I bought an iPhone 4 and an iPad 2 yesterday... have not been able to use any of them so far as itunes does not recognize either of them on my machine.. have tried several times to restart the machine, reinstall iTunes etc etc.. I have a Sony Viao with Windows Vistas Home Edition, and of course am running as an Administrator.
    Anyone has faced this problem earlier - any pointers would be greatly appreciated.
    Regards,
    Saurabh

    Zanaters wrote:
    I don't have this problem with my windows machine.  Unfortunately, a new policy in the company requires that ITunes not be on your computer or you may be terminated.  I've got one week to figure out why things are different so that I am good to go for the future.
    First off, copy the entire /Music/iTunes/ folder from your work computer to an external drive.
    Copy it to /Music/ on your personal computer.
    Try using a USB port on the back of the computer.
    If the devices are still not discovered, see this -> http://www.apple.com/support/iphone/troubleshooting/

  • Ipad Air update to IOS 8.02( stuck in apple logo; turns blue every few minutes and starts over; itunes does not recognize it)

    Hi everybody,
    i updated my IPAD  bought in october 2013 to IOS 8.02.
    Now the IPAD only goes to the apple logo, every few minutes it blinks blue and starts over. I tried doing the home plus switch thing and it doesnt work.
    Itunes does not recognize the device either.
    Do you have any solution to this issue?
    Regards,
    Guillermo

    Hi Guillermo ..
    Folllow the instructions for recovery mode here >  iOS: Unable to update or restore

  • The iPad does not ship unless he closed  ITunes does not recognize or computer  If he shipped fully closed device  I bought a charger and bought Link and the same problem persists  IPad without Jelbrak

    The iPad does not ship unless he closed
    ITunes does not recognize or computer
    If he shipped fully closed device
    I bought a charger and bought Link and the same problem persists
    IPad without Jelbrak

    What do you mean 'does not ship unless he closed' ? What are you trying to do with your iPad, and what happens when you do it ?
    If your computer's iTunes isn't recognising the iPad then do you have the latest version of iTunes installed on your computer ?
    device not showing in iTunes on a PC : http://support.apple.com/kb/TS1538
    on a Mac : http://support.apple.com/kb/TS1591

  • HT201210 Hi. During the process of updating my ipad to IOS 6 utilizing iTunes, I received the error #1602. I tried the update procedure again, this time itunes does not recognize the devise. The pad is displaying USB connecter to iTunes. Does anyone recom

    Hi. During the process of updating my ipad to IOS 6 utilizing iTunes, I received the error #1602. I tried the update procedure again, this time itunes does not recognize the devise. The pad is displaying USB connecter to iTunes. Can anyone recomend a fix?
    Thank you

    There is only one fix now. The message on the screen means that you have to restore the iOS software on the iPad now. Read the part at the very end about using recovery mode.
    iTunes: Restoring iOS software - Support - Apple
    About the error code.....
    Error 1600, 1601, 1602
    Follow the steps listed above for Error 1604. This error may also be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.
    If needed.....
    Additional Information
    If your device is continually restarting, not responding, or showing the Apple logo with no progress bar or a stopped progress bar, place the device into recovery mode and try restoring again.

  • HT4623 my ipad 2 is "stuck" with a connect to itunes on the screen ... and itunes says it could not restore the os ... so now itunes does not recognize the ipad when connected to the pc ... i have updated all software on the pc and disabled Norton as the

    my ipad 2 is "stuck" with a connect to itunes on the screen ... and itunes says it could not restore the os ... so now itunes does not recognize the ipad when connected to the pc ...i have updates all the software on the pc and disabled Norton as the troubleshoot instructions suggested; however itunes still does not recognize the ipad .... help!

    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
    Update and restore alert messages on iPhone, iPad, and iPod touch
    http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
    iOS: Resolving update and restore alert messages
    http://support.apple.com/kb/TS1275
    iPad: Unable to update or restore
    http://support.apple.com/kb/ht4097
    iTunes: Specific update-and-restore error messages and advanced troubleshooting
    http://support.apple.com/kb/TS3694
    iPad not appearing in iTunes
    http://www.apple.com/support/ipad/assistant/itunes/
    iOS: Device not recognized in iTunes for Mac OS X
    http://support.apple.com/kb/TS1591
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    iTunes for Windows: Device Sync Tests
    http://support.apple.com/kb/HT4235
    IOS: Syncing with iTunes
    http://support.apple.com/kb/HT1386
    Apple - Support - iPad - Syncing
    http://www.apple.com/support/ipad/syncing/
    iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi Syncing
    http://support.apple.com/kb/ts4062
     Cheers, Tom

Maybe you are looking for

  • How to transfer an iMail to a new iMail group

    I am getting set to create a new mailing list, rather extensive.  I want to create a new group, and transfer in all of the contacts that I have used in a similar group from next near.  Effectively, the only change I will be making to the group name w

  • Nokia Multiscanner (Nokia's OCR app)

    Hi there. This is more a software request than a review. Sometime ago there was a great application for Nokia devices; it was called "Nokia Multiscanner" and it was Nokia's OCR app. Actually now Nokia has released great Nokia camera devices starting

  • How to set s:text name=""/ in Struts2?

    Hi I want to do the equivalent of Struts 1's <fmt:message key="${someVariable}"/>using Struts2: <s:text name="somethingDynamicHere"/>I have searched high and low for the answer... anyone know how to do this please?? Nick

  • Excise Stock transfer

    Scenario: I have two company codes C1 (with plant1) & C2 (with plant2) Both the plants are exciseable. From the stores of plant1 I sent finished goods to the plant2(its a depot). From this plant2 the material is sold to customers. In the process flow

  • License ECC6

    Hi, ==>ECC6 SR2 and Oracle 10.2 I SLICENSE installed in the new license. SAP says success. In saplicense -show, no license. But when I try to launch an RFC connection. I get an error when checking license. I can not configure my STMS for the same rea