ITunes does not recognize ipad when connected

When I connect my iPad to the computer, iTunes does not recognize the iPad.  I have had the iPad for several months now and have not had the issue.  I checked the cable with the charger and that works fine.  Went through what Apple suggested to no avail.  Any ideas?

Did you try the steps contained in the attached link?  http://www.apple.com/support/ipad/assistant/itunes/

Similar Messages

  • Help, got an iPad 2 and it will not turn on? Just got a blank screen with a apple logo.  Tried restore (I.e. holding down both buttons for 10min) iTunes also does not recognise iPad when connected to mac?

    Help, got an iPad 2 and it will not turn on? Just got a blank screen with a apple logo.  Tried restore (I.e. holding down both buttons for 10min) iTunes also does not recognise iPad when connected to mac?

    If the device doesn't appear in iTunes, try using the steps in this article to force the device into recovery mode.

  • ITunes does not recognize iPad due to "unknown error OxE80000565."  Does this mean anything to anyone?

    iTunes does not recognize iPad  due to "Unknown error OxE80000565."  Does this mean anything to anyone?

    Hello pyloric
    For that specific issue, check out the article below for the steps to walk you through to get your iPad talking to iTunes again.
    iOS: Unknown error containing '0xE' when connecting to a Windows PC
    http://support.apple.com/kb/TS3221
    Regards,
    -Norm G.

  • ITunes does not start anymore when connecting iphone

    Hello,
    since my latest upgrade of itunes (still under snow leopard) itunes does not start anymore when connecting my iPhone 4 to my Macbook Pro.
    Meanwhile I upgraded to Lion and installed the latest itunes patch but same behavior,
    Does anybody has an idea to solve this issue?
    Thx,
    Hendrik

    Hi,
    See this Discussion:
    https://discussions.apple.com/message/15693777#15693777
    Cheers,  

  • Itunes does not start automaticly when connected although auto is thicked help?

    Itunes does not start automaticly when connected although autostart is thicked can anyone help?

    Hi,
    See this Discussion:
    https://discussions.apple.com/message/15693777#15693777
    Cheers,  

  • Itunes does not recognize IPAD

    I have a new IPAD2 and when I connect it to my Home PC Itunes does not recognize it. It is recognized on my work PC. How can I fix?

    There is troubleshooting help here http://support.apple.com/kb/TS1538

  • Itunes does not recognize IPAD 3 after upgrading to IOS 6.

    After updating my IPAD 3 to IOS 6, Itunes does not recognize my IPAD 3.  What can I do to fix this issue?

    I have a similar problem with the iPhone. Tried everything you can think of and then some. There is apparently some devastating bug 7.6 introduced into normal USB device recognition. I've been able to force the phone into recovery mode; the boot recovery USB driver does still work. Restoring the phone every time I need to sync is both scary and time-consuming.

  • After upgrading to 7.1 iTunes does not recognize iPad device

    I upgraded iPad to system 7.1.  I got a message to connect to my iMac and iTunes by my USB cable, which I did.
    iTunes no longer recognizes the iPad wirelessly and does not recognize it even when attached byUSB cable.
    My iPhone (4.2.1) is recognized by cable.
    Any suggestions?
    Bryan Davis

    Thank you, I tried uninstalling the device driver to reinstall again. After doing the scan for hardware changes, nothing flashes on the device manager. I dont see anything related to the IPAD or any other device for which driver shows unidentified device. It is as though the device is not being seen by the computer at all..
    I even tried flashing the home/sleep buttons together but that doesnt seem to identify any device either.
    Anything else I am missing?

  • Itunes does not recognize ipad 2

    When my PC and ipad2 are cinnecting via wifi at the same router in my house, which allows up to 5 connection, itunes does not see ipad2.
    can you help?
    dario

    You can only connect your iPad to your computer's iTunes via the provided cable - you cannot sync content wirelessly from iTunes. You can do home sharing to your iPad via wifi, but not syncing iTunes content.

  • Itunes does not recognize my internet connection

    Hey everyone,
    Recently I had to reinstall itunes, and since I reinstalled it the programme does not recognize when I'm connected to the internet.
    As a result the ishop, CDDB Gracenote etc. simply do not work, as itunes claims that I am not connected to the internet (even though I am!).
    I'm sure this is a relatively simple problem to fix...can anyone help me?
    Cheers people,
    Mark

    I might have found a solution,that works for me with windows XP. First restart the computer and don't start up itunes. Open Norton Internet Security and click on Status and Settings. Then click on personal firewall and then click on Configure, and click on the Programs tab. Scroll through the list of programs until you have goten to Apple itunes. Change the interntet Access to Permit All. Once you have saved these settings start up itunes. That worked for me. Please tell me if this helps anyone.

  • Windows 7 computer does not recognize SX50HS when connected by cable

    My computers, both of which run Windows 7, do not recognize the Powershot SX50HS when it is connected via the Canon cable. In other words, even after the cable is connected to the USB port and the camera's power is turned on, the camera does not show up as a device when you go to "Computer" and look at the list of drives, etc. How can I fix this? Thanks.

    If you don't know run the software disk that came with the SX50. It has the correct files that your computer needs in order to communicate with your camera.
    "A skill is developed through constant practice with a passion to improve, not bought."

  • IPAD 1 problems after ios 5.1.1 update, itunes does not recognize IPAD.. I check the device manager, it identifies an unknown device (My ipad) but unable to use it.

    I am using the generation 1 IPAD.
    I recently updated my ios from ios 4 to ios 5.1.1, I did the restore after the update and all seemed fine as it was detected the first time.
    I tried connecting the IPAD again but it shows that the computer, itunes is not able to detect the IPAD.
    I checked on the device manager, it identifies an unknown device (IPAD) and says no software for the driver. I am using windows 7 on my laptop. I never had any such problem with the iso 4. Any suggestions as to how this can be solved?
    Thanks,
    Vinay

    Thank you, I tried uninstalling the device driver to reinstall again. After doing the scan for hardware changes, nothing flashes on the device manager. I dont see anything related to the IPAD or any other device for which driver shows unidentified device. It is as though the device is not being seen by the computer at all..
    I even tried flashing the home/sleep buttons together but that doesnt seem to identify any device either.
    Anything else I am missing?

  • PC does not recognize ipad; itunes does not recognize ipad

    Using itunes 10.2.1, iOS 4.3.1.  Cannot get itunes to recognize ipad.  Have reinstalled itunes many times.  Have gone into DFU on ipad many times.  Have played with usbaapl many times.  Out of ideas to fix.  Ready to frisbee ipad into street below.

    Hello I had a similar experience and searched and searched the forums until I came across this fix, I manually updated the apples drivers manually myself rather than letting windows find them,for me this worked. I tried everything in the book and I mean everything, as soon as I updated my itunes program to the newest version and tried to plug in my iphone my computer would not recognize my device nor would it show up in itunes, I don't know if this will help anyone else or if I have posted this in the right place but it worked for me, I did not have to disable any of my spyware or uninstall itunes just followed the instructions in the link below and pretso it worked, so far so good it is early days and I am yet to try my ipad 2 using this way so hopefully it will work I had the same problem with both devices on my computer after the new update...mine all came down to the drivers on my windows xp and the new update from itunes hope this helps someone else as well.
    http://support.apple.com/kb/ts1538
    I also followed a very old thread (sorry I can not find this thread anymore) from a few years ago that helped ....THANK YOU TO THE PERSON WHO POSTED IT YEARS AGO IN SOME FORUM
    I went to device manager and found my iphone in a heading under others generally it show up in the heading under usb controller if installed correctly (why it showed up here in the first place I have no idea, it was also showing iphone with a yellow question mark I then highlighted the iphone then clicked up the top of the screen to update drivers
    Welcome to hardware wizard pops up I clicked no not this time then next
    I choose to install from a specific location I then clicked on browse to find the file C:\ Program Files\Common Files\Apple\ Mobile Device Support Drivers then clicked next I waited 30 seconds before plugging my iphone back into my usb and presto  my phone showed up in itunes and on the computer by manually updating the drivers myself..Good Luck I really hope this helps someone else and if it does could we please pass the fix along as this drove me nuts for days....

  • TS1347 Itunes does not recognize outlook when Iphone is plugged in and the info tab is clicked.  I added the addin in outlook in the advavced tools option.  I want to sync contacts and calendars with outlook and my iphone s.  I have completed the 7.0.1 os

    Outlook contacts is not an option when trying to sync to my iphone.  I added the addin in the outlook tools section.  It has worked in the past but I have not used it lately to sync.

    Hi Sergio,
    Try the general tips in this article: http://support.apple.com/kb/HT1692
    The steps for Resetting the Sync History will most likely resolve the issue.
    -Jason

  • I have itunes installed but itunes does not recognize this when i got to click on a link in itunes to play something; it wants me to reinstall, which i've done, to no avail.

    I don't know if it is related, but I'm having exactly the same difficulty with quick tunes.

    I do not have that box checked... so now what?
    Thanks

Maybe you are looking for