ITunes does not work om iPhone 5 after upgrade to iOs7. App store is available without problems. do somone have a tip?

iTunes does not work om iPhone 5 after upgrade to iOs7. App store is available without problems. do somone have a tip?

Check Settings > General > Restrictions, and check out Contacts toward the bottom under the privacy restrictions.
That sounds like the probable cause you cannot add contacts.
Regarding the iCloud behavior, that sounds like it got huge (35,000) because of incorporating other contacts (from social media, perhaps). Also contacts sync has nothing to do with iCloud behavior. The whole idea of keeping your contacts in the cloud is that once you change them on one device, they change everywhere. Specific syncs are not relevant.

Similar Messages

Itunes does not recognize IPAD 3 after upgrading to IOS 6.

After updating my IPAD 3 to IOS 6, Itunes does not recognize my IPAD 3. What can I do to fix this issue?

I have a similar problem with the iPhone. Tried everything you can think of and then some. There is apparently some devastating bug 7.6 introduced into normal USB device recognition. I've been able to force the phone into recovery mode; the boot recovery USB driver does still work. Restoring the phone every time I need to sync is both scary and time-consuming.

ITunes does not recognize my Iphone after I tried to unlock it

I tried to unlock my iPhone with redsnow but smth went wrong and now it sais conect to iTunes, but iTunes does not recognize it. iPhone is stuck in conect to iTunes picture.

Under the Terms of Use of this forum it is prohibited to discuss jail breaking. By jail breaking your iPhone you void any warranty you may have, forfeit any support from this forum, leave your iPhone vulnerable to malware and risk bricking your iPhone should you attempt future software updates or restoring your iPhone - http://support.apple.com/kb/HT3743.

Itunes 10 does not 'see' my iphone after upgrading my Imac to Snow leopard

Hi,
I just upgraded my iMac to Snow Leopard 10.6.3. When I plug my iphone (4) (USB), Itunes does not sync my phone, and it does not even appear as being connected to my iMac. I dont have any other issues.
I should add that I always have connected my Iphone through the USB on the keyboard, as I dont have enough USB slots in the back. This has worked just fine in the past. The keyboard is wired.

Try plugging it into one of the USB ports on the Mac itself and see if that works.

IPhone does not work in car after upgrading to os5

After upgrading to os5 my build in hands free device does not work properly anymore, lot of noise, disconnects, connects in general not usable anymore.
How to fix this?

Does your aftermarket solution connect to the Nano's headphone jack or to the dock connector?
If it connects to the headphone jack I would suggest buying an iPhone headphone adapter. I'm expecting mine to arrive via FedEx tomorrow so that I can use my iPhone in the car with a cassette adapter.
Hope this helps.

BINARY SEARCH does not work as before after upgrade

We recently upgraded from HRSP 26 to HRSP 40 as well as similar upgrades in non-HR areas on our ECC 6.04 system. We've been in SAP since 1998, and have a lot of old custom programs which were written when we were still new at ABAP. In a few, we put records into an internal table sorted the table, maybe added a few more records to the table, and did a READ BINARY SEARCH. Granted, this is not correct, adding records to a table after it is sorted. But these programs have worked for more than 10 years and now, since our upgrade, the READ BINARY SEARCH does not always find a record where it did before the upgrade.
So this is mostly just a heads-up. If you are missing data in reports after upgrading, this might be the issue. Also I am wondering if anyone has experienced this.
Heads-up!
Janice Ishee

Hi Janice,
you did not give any context. Please note that it is a popular error to think that a SELECT statement will fetch data in order of the primary key of the table - although it happens quite frequently. So always first sort, then binary search.
Probably not related to upgrade.
Regards,
Clemens

Video app does not report disk usage after upgrade to iOS7

Ever since upgrading to iOS7, the Videos app reports “No Data” under General->Usage, even though I have a number of movies and TV Shows downloaded from iTunes. Downloading additional content or deleting all downloaded content and re-downloading does not affect the result - it still reports “No Data”. I have confirmed that these videos are downloaded to the device and not on the cloud, and remain accessible will all cellular and wi-fi connectivity disabled. This behavior occurs on both my iPad Air (currently on iOS 7.0.4) and my previous iPad 3 (Retina).
What can I do to correct this issue and have iOS correctly report video usage?

I'm having exactly the same issue and I'm yet to discover a solution. The vast majority of my 64GB iPad Air is compromised of video content (HD movies) but the Usage section of Settings shows 'No Data'. Very weird. Would love a fix for this as it's kinda hard to manage my data usage when I'm not seeing all the facts!

HT201263 itunes does not recognize my iphone after update

First I had Trouble installing the latest Itunes Update, then I had to delete Itunes from my computer and re-install it. Now, it doesn't recognize my Iphone and I can't sync. What do I do now? Yes, I have an older Iphone (3GS) but, what the ****!
Any Ideas, Anyone?
Thanks
FurrfaceOK

Hello FurrfaceOK,
The following article provides troubleshooting that can help get iTunes to see your iPhone.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Cheers,
Allen

Yosemite does not recognize HP printer after upgrade. I can print from my iPhone, but not my 13" Macbook Air (2013)Yosemite does not recognize HP printer after upgrade. I can print from my iPhone, but not my 13" Macbook Air (2013)

Yosemite does not recognize HP printer after upgrade. I can print from my iPhone, but not my 13" Macbook Air (2013)
Are others having the same problems?

Try this. Worked for me.
- turn off your router
- turn off you Mac's after removing all available printers
- turn off all iDevices
- do a factory reset of your printer remove all cables min. 30 sec.
- turn on your router first
- ran the network set up wizard
- give your printer also a new name like "DeskJet 2015"
Something which you don't have used before.
- turn on your Mac's and add your printer
- turn on your iDevices at least.
Should work after these steps.
It worked for me including all iDevices.
iOS and Yosemite

TS4062 hi can somebody help me... itunes does not accept the iphone 4s but i already have the version 64 bit to work with windows 7 64 bit, the computer recognizes the phone but itunes sais i need 64 bit itunes.... please is there something im missing...

hi can somebody help me... itunes does not accept the iphone 4s but i already have the version 64 bit to work with windows 7 64 bit, the computer recognizes the phone but itunes sais i need 64 bit itunes. please is there something im missing... thanks

Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
(If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
Does it install (or uninstall and then reinstall) properly for you? If so, can you get a normal iTunes install to go through properly now?
If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.)

HT201412 My text messages go to my ipad but not my iphone after upgrading to ios7.0.2, does anyone know a fix

My text messages go to my ipad but not my iphone after upgrading to ios7.0.2, does anyone know a fix

They are not text messages, they are iMessages.
Turn on iMessage on the iPhone.

AirPlay does not work with iPhone 4 s or iPad.Remote doesn´t work as well

AirPlay does not work with iPhone 4 s or iPad.Remote doesn´t work as well.
WLAN is working, I can use Youtube on my AppleTV, but I can´t connect to my computer or use airplay on my iPhone or iPad.

Something is not configured correctly that is creating issues with your AppleTV. You can disconnect it from the TV and power, and then plug it into your computer with a micro-USB cable. After launching iTunes on your computer, you will be able to restore it to default settings and upgrade the software.

When i plug in my iphone to the system, itunes does not recognize my iphone. i have tried all the troubleshooting part n there are no results yet. what should i do?

when i plug in my iphone to the system, itunes does not recognize my iphone. i have tried all the troubleshooting part n there are no results yet. what should i do?

I have reset my iphone and made sure all updates have been done on my macbook pro and iphone. It was after updating my macpro that I plugged in my phone and went to itunes to backup phone and can't see the device anywhere! I have also done all the troubleshooting that apple.com recommended too...all except re-installing itunes!

Itunes does not work me in the pc

itunes does not work me in the pc, it gives me an unknown error 0x80090330

I "fought" for more than three months with a problem concerning the iPhone 3G. The operator did not introduce any amendments, and the error was corrected in time with the new software provided by Apple.
This time, Orange is also not able to improve anything. It seems that only Apple can do something about it.
On the Polish forum for Apple products, is a topic devoted to this problem.
http://myapple.pl/iphone-rozmowy-ogolne/150531-w-iphone-4-orange-rozmowca-nas-ni e-slyszy.html
Paste link in order not to be groundless.
Once again, I will describe exactly what the problem is.
During a conversation in a 3G coverage, I no longer hear the caller at a time when 3G coverage is lost and there is a change to the Edge.
By about 10 to 15 seconds the caller does not hear me. Once again, this time the caller hears me and the conversation can be conducted smoothly on Edge.
I would add that in other phones, as well as the iPhone 3G, switching from 3G to Edge is smooth and without any disturbance - the same network.
Message was edited by: Reaper123

Since IOS7,The synchronization itunes does not work any more

since IOS7, the synchronization itunes does not work any more....

Hi martinafromlimassol,
Welcome to the Apple Support Communities!
I understand that you iPhone has been dropped and the display no longer functions. In this situation, it may be necessary to have your iPhone 5 evaluated for repair. Please use the attached link for information on the process of having your iPhone evaluated.
iPhone Repair and Service - Apple Support
Best regards,
Joe

ITunes does not work om iPhone 5 after upgrade to iOs7. App store is available without problems. do somone have a tip?

Similar Messages

Maybe you are looking for