ITunes doesn't fit my Samsung screen. Why is it too big?

The iTunes interface is too large for my Samsung screen. There is no menu bar at the top. What must I do to make it fit?

If your Windows taskbar is set to "use small icons", this may cause the problem.
Unselect "use small icons", and then use iTunes and it will be fine. Interestingly, if you then go back and enable "use small icons", iTunes will still be fine even after reboot.
Good luck!

Similar Messages

  • On my Yahoo Mail everything is sooo large it doesn't fit on the screen. Google Chrome isn't like that on this computer. How can I make it all fit with Firefox? It's really annoyingut

    Yahoomail the text and everything is so large it doesn't fit on the screen. I always have to scroll left and right to read my mail. It's really annoying. I don't know how to adjust that . I tried Google Chrome and it was more normal. Everything fit. I prefer Firefox so what can be done about this?

    Reset the page zoom on pages that cause problems: <b>View > Zoom > Reset</b> (Ctrl+0 (zero); Cmd+0 on Mac)
    *http://kb.mozillazine.org/Zoom_text_of_web_pages
    *https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

  • The font size is so big my desktop doesn't fit on the screen

    The font size is so big my desktop doesn't fit on the screen and can't figure out how to fix it.

    There solutions in the "More like this" list on the right.
    If this behaviour is system wide you have to choose another reslotution in SystemPreferences/Displays.

  • How do you minimize the export setting screen becuase mine is too big and I cant go on the export option

    how do you minimize the export setting screen becuase mine is too big and I cant go on the export option

    The export dialog is manipulated in the same way as any window.  If you don't have enough screen real estate to grab the edges of the dialog and change it's size, then you may need to work on a larger screen, or at least increase the display resolution of the screen you're on.

  • HT204291 When I airplay my ipad, it doesn't fit the tv screen

    I have ipad air and using toshiba tv. When I mirror the image to the tv screen, it doesn't "fit to screen". Are other people having this problem?

    Welcome to the Apple Community.
    Mirroring won't fill the TV screen. The iPad has an aspect ratio of 4:3 and the iPhone 4S or prior an aspect ratio of 3:2, neither of these will fit exactly into a TV screen which as an aspect ratio of 16:9. The Apple TV will not zoom the mirrored image, because it may well cut off information which is situated at the top or bottom of the screen.
    You may wish to try each of the settings in ‘Settings > Audio & Video > Adjust for AirPlay overscan’ for the best setting that suits you.

  • Itunes doesn't recognize my iphone 4, why?

    Itunes doesn't recognize my IPhone when I connect it to my laptop.  Why?

    have a look at this support article.
    also, make sure Apple Mobile Device Service is installed and started.

  • [SOLVED]xorg.conf, my screen doesn't fit on my screen

    Hi, I've got everything set up & working well except for my screen. The desktop is too big for the monitor, about a third of it is hidden off the monitor to the bottom right. I've looked at the wiki and tried xrandr, but no dice. I'm using the VESA driver which has always worked ok in other distros. Actually the crunchbang splashscreen was like this, but otherwise it was normal. I tried the openchrome driver, got a blank screen. Searched other BBS too. I don't know the term for this problem to search for. The drivers off the VIA site are for older kernels, I'd rather just get it working with VESA, with a 1Ghz CPU I don't see myself doing much in 3D anyway.
    $ xrandr
    Screen 0: minimum 640 x 480, current 1280 x 1024, maximum 1280 x 1024
    default connected 1280x1024+0+0 0mm x 0mm
       1280x1024       0.0*
       1024x768        0.0 
       800x600         0.0 
       640x480         0.0
    xorg.conf
    Section "ServerLayout"
        Identifier     "X.org Configured"
        Screen      0  "Screen0" 0 0
        InputDevice    "Mouse0" "CorePointer"
        InputDevice    "Keyboard0" "CoreKeyboard"
    EndSection
    Section "Files"
        ModulePath   "/usr/lib/xorg/modules"
        FontPath     "/usr/share/fonts/misc"
        FontPath     "/usr/share/fonts/100dpi:unscaled"
        FontPath     "/usr/share/fonts/75dpi:unscaled"
        FontPath     "/usr/share/fonts/TTF"
        FontPath     "/usr/share/fonts/Type1"
    EndSection
    Section "Module"
        Load  "dbe"
        Load  "dri"
        Load  "dri2"
        Load  "glx"
        Load  "extmod"
    EndSection
    Section "InputDevice"
        Identifier  "Keyboard0"
        Driver      "kbd"
    EndSection
    Section "InputDevice"
        Identifier  "Mouse0"
        Driver      "mouse"
        Option        "Protocol" "auto"
        Option        "Device" "/dev/input/mice"
        Option        "ZAxisMapping" "4 5 6 7"
    EndSection
    Section "Monitor"
        Identifier   "Monitor0"
        VendorName   "Monitor Vendor"
        ModelName    "Monitor Model"
    EndSection
    Section "Device"
            ### Available Driver options are:-
            ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
            ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
            ### [arg]: arg optional
            #Option     "ShadowFB"               # [<bool>]
            #Option     "DefaultRefresh"         # [<bool>]
            #Option     "ModeSetClearScreen"     # [<bool>]
        Identifier  "Card0"
        Driver      "vesa"
        VendorName  "VIA Technologies, Inc."
        BoardName   "CX700/VX700 [S3 UniChrome Pro]"
        BusID       "PCI:1:0:0"
    EndSection
    Section "Screen"
        Identifier "Screen0"
        Device     "Card0"
        Monitor    "Monitor0"
        SubSection "Display"
            Viewport   0 0
            Depth     1
        EndSubSection
        SubSection "Display"
            Viewport   0 0
            Depth     4
        EndSubSection
        SubSection "Display"
            Viewport   0 0
            Depth     8
        EndSubSection
        SubSection "Display"
            Viewport   0 0
            Depth     15
        EndSubSection
        SubSection "Display"
            Viewport   0 0
            Depth     16
        EndSubSection
        SubSection "Display"
            Viewport   0 0
            Depth     24
        EndSubSection
    EndSection
    Here's my monitor specs:
    http://www.samsung.com/ca/consumer/offi … fullspec=F
    Just about everything else is working like a dream, I was hoping to get it all going without posting, but here we are. Thanks a lot for any help.
    Last edited by stozi (2011-03-20 01:46:55)

    Solved it.
    It was enough to remove the display mode 1280x1024 in all screen sections.
    Section "ServerLayout"
        Identifier     "X.org Configured"
        Screen      0  "Screen0" 0 0
        InputDevice    "Mouse0" "CorePointer"
        InputDevice    "Keyboard0" "CoreKeyboard"
    EndSection
    Section "Files"
        ModulePath   "/usr/lib/xorg/modules"
        FontPath     "/usr/share/fonts/local"
        FontPath     "/usr/share/fonts/TTF"
        FontPath     "/usr/share/fonts/OTF"
        FontPath     "/usr/share/fonts/Type1"
        FontPath     "/usr/share/fonts/misc"
        FontPath     "/usr/share/fonts/CID"
        FontPath     "/usr/share/fonts/75dpi/:unscaled"
        FontPath     "/usr/share/fonts/100dpi/:unscaled"
        FontPath     "/usr/share/fonts/75dpi"
        FontPath     "/usr/share/fonts/100dpi"
        FontPath     "/usr/share/fonts/cyrillic"
    EndSection
    Section "Module"
        Load  "dri"
        Load  "dbe"
        Load  "dri2"
        Load  "extmod"
        Load  "glx"
    EndSection
    Section "InputDevice"
        Identifier  "Keyboard0"
        Driver      "kbd"
    EndSection
    Section "InputDevice"
        Identifier  "Mouse0"
        Driver      "mouse"
        Option        "Protocol" "auto"
        Option        "Device" "/dev/input/mice"
        Option        "ZAxisMapping" "4 5 6 7"
    EndSection
    Section "Monitor"
        Identifier   "Monitor0"
        VendorName   "Monitor Vendor"
        ModelName    "Monitor Model"
        HorizSync 31.5 - 50.0
        VertRefresh 40- 90
        Option "UseEdidFreqs" "1"
        Option "ReducedBlanking"
    EndSection
    Section "Device"
            ### Available Driver options are:-
            ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
            ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
            ### [arg]: arg optional
            #Option     "PrintVGARegs"           # [<bool>]
            #Option     "PrintTVRegs"            # [<bool>]
            #Option     "I2CScan"                # [<bool>]
            #Option     "VBEModes"               # [<bool>]
            #Option     "NoAccel"                # [<bool>]
            #Option     "AccelMethod"            # <str>
            #Option     "ExaNoComposite"         # [<bool>]
            #Option     "ExaScratchSize"         # <i>
            #Option     "SWCursor"               # [<bool>]
            #Option     "ShadowFB"               # [<bool>]
            #Option     "Rotate"                 # [<str>]
            #Option     "VideoRAM"               # <i>
            #Option     "ActiveDevice"           # [<str>]
            #Option     "BusWidth"               # [<str>]
            #Option     "Center"                 # [<bool>]
            #Option     "PanelSize"              # [<str>]
            #Option     "ForcePanel"             # [<bool>]
            #Option     "TVDotCrawl"             # [<bool>]
            #Option     "TVDeflicker"            # <i>
            #Option     "TVType"                 # [<str>]
            #Option     "TVOutput"               # [<str>]
            #Option     "TVPort"                 # [<str>]
            #Option     "DisableVQ"              # [<bool>]
            #Option     "DisableIRQ"             # [<bool>]
            #Option     "EnableAGPDMA"           # [<bool>]
            #Option     "NoAGPFor2D"             # [<bool>]
            #Option     "NoXVDMA"                # [<bool>]
            #Option     "VbeSaveRestore"         # [<bool>]
            #Option     "DisableXvBWCheck"       # [<bool>]
            #Option     "ModeSwitchMethod"       # [<str>]
            #Option     "MaxDRIMem"              # <i>
            #Option     "AGPMem"                 # <i>
        Identifier  "Card0"
        Driver      "openchrome"
        VendorName  "Unknown Vendor"
        BoardName   "Unknown Board"
        BusID       "PCI:1:0:0"
        Option "RenderAccel" "true"
        Option "XaaNoOffscreenPixmaps" "on"
    EndSection
    Section "Screen"
        Identifier "Screen0"
        Device     "Card0"
        Monitor    "Monitor0"
        DefaultDepth 24
        SubSection "Display"
            Viewport   0 0
            Depth     8
            Modes "1024x768" "800x600" "640x480"
        EndSubSection
        SubSection "Display"
            Viewport   0 0
            Depth     16
            Modes "1024x768" "800x600" "640x480"
        EndSubSection
        SubSection "Display"
            Viewport   0 0
            Depth     24
            Modes "1024x768" "800x600" "640x480"
        EndSubSection
        Subsection "Display"
            Viewport   0 0
            Depth      32
            Modes "1024x768" "800x600" "640x480"
        EndSubsection
    EndSection
    Section "Extensions"
        Option "Composite" "Disable"
    EndSection

  • Logic pro doesn't fit on my screen

    I have a 13inch macbook pro 2012 and when i use logic pro x it fills the screen and part of the application is off the screen meaning i can't see all of it and there is no way that i know to make the application smaller to fit on the screen ?

    Hello gggffff,
    This can be done by choosing 'Zoom' under the Window menu in the menu bar.
    This solved my question by VikingOSX  on Oct 17, 2012 10:57 AM
    Window > Zoom.
    Command and + key will zoom in.
    Command and - key will zoom out.
    For applications that support trackpad zoom, enable Zoom in or out in Trackpad Scroll & Zoom prefs.
    See video at System Preferences > Trackpad > Scroll & Zoom. Hover pointer over Zoom in or Out.
    See the answer in context
    how to zoom on the new mountain lion
    https://discussions.apple.com/thread/4441149
    Sincerely,
    Allen

  • Preferences windows doesn't fit on netbook screen

    I'm a satisfied netbook user since more that 6 months, I've noticed that several applications are still using windows dimensions way too big for our little 1024x600px screens. The same happens with Adobe Reader and his preferences window.
    Hope Adobe will fix this in a later release
    Regards, Alex
    Pagerank Validation

    Reset the page zoom on pages that cause problems: <b>View > Zoom > Reset</b> (Ctrl+0 (zero); Cmd+0 on Mac)
    *http://kb.mozillazine.org/Zoom_text_of_web_pages
    *https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

  • My Quicktime Player Screen Recording File is too big

    Whenever I record a video it is too big. To test it out I recorded a 3 second video and it was 5mb. Please help I really want to screen record.

    Too big for what? Can you record a full session without the Mac freezing or locking up?
    You can record the file & recompress it afterwards to make it use less storage size if you want.
    Evom is a simple tool for simple video converting …
    http://thelittleappfactory.com/evom/
    Or you could probably use Screenflow (or iMovie) if you need complex editing etc…
    http://www.telestream.net/screenflow/overview.htm
    Handbrake is another (free) option for compressing & converting video.
    http://handbrake.fr/
    Just be aware that if the video is tiny it may be impossible to see what is going on, make sure your display settings make things big enough when you capture.

  • Is it just me or my iTunes doesn't fit my screen, even after I maximized it???

    As the question I mentioned, does anybody have this issue to on iTunes on Windows??? None of its previous version have this problem btw.

    If your Windows taskbar is set to "use small icons", this may cause the problem.
    Unselect "use small icons", and then use iTunes and it will be fine. Interestingly, if you then go back and enable "use small icons", iTunes will still be fine even after reboot.
    Good luck!

  • My desktop doesn't fit on my screen

    My desktop and any software screens will not fit on my MacBook computer monitor anymore. Mousing to the edges of the screen will cause it to slide into view while the other edges slide out of view. I've tried changing to different screen resolutions but it doesn't fix the problem. Any suggestion would be be very appreciated. 
    Thank you.

    Hold down the Control-key and use your Mouse/Trackpad to scroll down at the same time.
    Go to System Prfeferences the Universal Access and disable the "Zoom"-feature.
    Zoom can come up when you used the Control-key plus Mouse/trackpad-scroll up.
    The Zoom feature itself is enabled/disabled by Alt-Command-8
    When enabled: Alt-Command-= zooms in and Alt-Command- - zooms out.
    Quite often around here there are cats involved
    Stefan

  • ITunes window doesnt fit on pc screen

    How can I fix iTunes to fit properly on my pc screen and be able to view the entire window ?

    One thing to check is your screen resolution, iTunes requires a minimum of 1024x768.
    You can do this in desktop>>Properties>>Settings

  • Movie doesn't fit the tv screen

    Hi,
    i transfered a video from my camera wide screen to my laptop using iMovieHD6. Then, i shared it to iDVD6 and burnt a dvd using Best Quality encoding. When i play it on my tv, which is wide screen, the image is cut. Anyone can tell me what to do to make it fit the TV Safe Area. I am new to the mac world i need help!
    Thanks
    MacBook Pro Mac OS X (10.4.9)

    DVD: How to Determine TV Safe Area
    http://docs.info.apple.com/article.html?artnum=50151
    iDVD: Creating widescreen DVDs for standard size televisions
    http://docs.info.apple.com/article.html?artnum=303030
    http://discussions.apple.com/thread.jspa?messageID=2551853&#2551853
    Hope this is Helpful & Solves the problem but if not come on back.

  • My display doesn't fit on my screen

    I can't see both sides of my screen display, thus I can't access the back button on the left and the scroll on the right at the same time.  How can a iadjust the setting to do so?

    Sorry, I have an iMac with a 24" screen. My resolution is set to the maximum, but as I look at this page, I can see the scroll bar on the right, but I can't see the back button at the top left.  I am not computer savvy enough to know if there is some sort of command button to remedy this, so I have to move the whole display back and forth, which. when doing searches, is a real hassle.
    When I go on Google searches, about this problem, I find a lot of people describingthe same problem, but maybe we're not using the correct terminolgy to express it.  I would just like to be able to see the scroll bar and the back button on the screen at the same time.

Maybe you are looking for

  • Itunes wont open. itunes has stopped working message Please help!!

    I had itune 10.1 working just normal, and suddenly it wont open.    even before that, 1st problem i had  was with Quick time, i couldnt uninstall it, kept saying newer version of Quick time installed..or something like that. and i figured out to inst

  • How do I recreate my iCloud mail account on my iPad Air.

    Took my iPad Air to Genius Bar at Apple store bekse of frequent system crashes/freezes.  Tech removed all apps and system, then reloaded iOS.  Result was like having a new device with no Settings/ apps.  Tried to recreate settings, including mail acc

  • Page content disappears in Edit mode - Custom Master Page

    Hi All, Below are the two issues I have with my master page. 1) I am facing the strange issue with the pages created using custom page layouts and custom master page. In browse mode, everything looks perfect and as expected. But when I try to edit th

  • ListRest Function in SQL

    Hello, I have a table with a file name like mainstreet_233232. Now I have another column in the same table as listing number. I want to replace the existing value of the listing number with the numbers in the file name. Here is my query <cfquery name

  • Fax printing negative image (White on Black)

    When a receive a fax and open it up in Acrobat everything looks normal. When I print the fax it reverses the image and prints white with a black background. I did find one work around but this is a pain. If a do a print preview and print from there i