Itunes for windows will not update

Just tried to update itunes for windows and nothing happened. please advise

Try updating your iTunes using an iTunesSetup.exe (or iTunes64Setup.exe) installer file downloaded from the Apple website:
http://www.apple.com/itunes/download/

Similar Messages

Unable to Burn CDs in iTunes for Windows: (Will not fit, but it should.)

I am attempting to fix an issue with a friend's iTunes for Windows. Although previously this computer using this media was able to burn audio CDs through iTunes, recently, an error has appeared before any burn. When loading the proper amount of time to fit on a CD, iTunes claims:
"The songs in this playlist will not fit on one Audio CD"
"Do you want to create multiple Audio CDs with this playlist split across them?"
"This will require more than one CD to complete."
When running CD Diagnostics, I receive the following information:
++++++++++++++++++++++++++++++++++++++++++
Microsoft Windows XP Professional Service Pack 2 (Build 2600)
Dell Computer Corporation Dimension XPS Gen 2
iTunes 7.0.0.70
CD Driver 2.0.6.0
CD Driver DLL 2.0.6.0
UpperFilters: GEARAspiWDM (2.0.6.0),
Video Driver: 128MB DDR ATI Radeon 9800 Pro\128MB DDR ATI Radeon 9800 Pro
IDE\DiskMaxtor6Y080L0_________________________YAR41BW0, Bus Type ATA, Bus Address [0,0]
IDE\DiskWDCWD5000KS-00MNB0____________________07.02E07, Bus Type ATA, Bus Address [0,0]
IDE\CdRomHL-DT-STDVD-ROM_GDR8162B_______________0015___, Bus Type ATA, Bus Address [0,0]
IDE\CdRomSONYCD-RW__CRX216E_____________________PD01___, Bus Type ATA, Bus Address [1,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
Current user is an administrator.
D: HL-DT-ST DVD-ROM GDR8162B, Rev 0015
Drive is empty.
E: SONY CD-RW CRX216E, Rev PD01
Media in drive is blank.
Get drive speed succeeded.
The drive CDR speeds are: 4 8 10 12 16 24 32 40 48.
The drive CDRW speeds are: 4.
The last failed audio CD burn had error code -128(0xffffff80). It happened on drive E: SONY CD-RW CRX216E on CDR media at speed 0X.
++++++++++++++++++++++++++++++++++++++++++
Additionally, I copied the iTunes playlist to a new drive that was recently installed with Windows, and the same problem occurs when rebooting under that system.
Also, please note that this issue occured prior to updating to iTunes 7.
Any assistance anyone could offer would be greatly appreciated by both myself and my friend.
Thank you so much,
Keith
iTunes 7 Windows XP Pro

Hey,
Under warranty you'd be better then to call into phone support, if something has to be done with the notebook, they'll be able to set that up with you.
Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
I worked on behalf of HP.

Reinstalled Itunes for Windows will not recognize ipod touch 3rd generation.

Itunes for Windows and PC will not recognize my ipod touch 3rd generation. Also it will not fully charge using a brand new apple brand power adapter and cable. I have already uninstalled all Apple software on PC and reinstalled. I've tried every step suggested by Apple online iPod touch Troubleshooting Assistant.

the best thing i think you could do is go to an apple store or uninstall itunes and reinstall it one more time and see what happens

Itunes for windows will not play videos

Videos will not play back insde iTunes for windows on a windows 7 machine. I have uninstalled and reinstalled iTunes. The video starts to play audio and a still image on screen and after a bout 3 seconds the audio stops.

Hi TaylorFuhriman,
If you are having issues with video playback in iTunes for Windows, you may find the following article helpful:
Apple Support: Troubleshooting iTunes for Windows Vista or Windows 7 video playback performance issues
http://support.apple.com/kb/TS1718
Regards,
- Brenden

ITunes for Windows will not play the next song in the list

Hello,
I cannot get iTunes to play the next song in my list (general list, not a playlist). The random icon and/or repeat icon is not blue. Every time I press the next button (two arrows to the right), it picks another song from my list, instead of the one that is directly beneath the one that is playing.
I have iTunes version 11.0.1.12.
Has anyone have this happen before and how did you solve it? Thank you for all your replies.
Ilona T.

Hi TaylorFuhriman,
If you are having issues with video playback in iTunes for Windows, you may find the following article helpful:
Apple Support: Troubleshooting iTunes for Windows Vista or Windows 7 video playback performance issues
http://support.apple.com/kb/TS1718
Regards,
- Brenden

ITunes for Windows will not open, says im not authorized.

Every time I try to open iTunes it keeps giving me the error message, the folder itunes is on a locked disc or you do not have write permissions for this folder. everything worked fine until I was playing around with sharing for my network and I think I messed it up. Someone please help me. I have uninstalled itunes two times and reinstalled it with no luck. Please help me.

Hi TaylorFuhriman,
If you are having issues with video playback in iTunes for Windows, you may find the following article helpful:
Apple Support: Troubleshooting iTunes for Windows Vista or Windows 7 video playback performance issues
http://support.apple.com/kb/TS1718
Regards,
- Brenden

ITunes on Windows will not update any iOS-device

I have three iOS-devices. An iPod Touch 3rd gen (ver 3.1.3), and iPhone 3GS (4.2.1) and iPad. It's been a really long time that I remember that iTunes offered to update any of them. iTunes itself has been regularly updating and is now 10.5.1.42. The PC is Windows 7 Home Premium.
So, no updates being offered when I sync the devices, it will always check and say it will check again in a few weeks. I agreed to borrow my iPad to a friend, wiped it, and the moment he hooked it up to his Mac-iTunes, it suggested iOS5. I then decided I need to get to the bottom of this update issue of my own iTunes. I started by downloading the relevant ipsw-files for my phone and Touch and trying a direct shift-restore update. The result is the message: The iPhone ... could not be updated because the firmware file is not compatible. Same message for the Touch.
I tried installing iTunes on another computer at home, same message if I check for an update. Same error message if I try using a local file. Tried putting the Touch in DFU-mode, in that case iTunes goes through a lengthy update process, but the result is the same 3.1.3 iOS.
Nothing in the hosts-file about Apple. The Touch and the iPhone have never had any beta-releases or jailbreak code. The only thing I can think of is that I have two iTunes-accounts. My regular European one, and one to the US store. However, the second iTunes I installed is empty of any purchases and only has been signed on with my European account.
Any ideas? Have not tried Apple Support yet...if I can even get it for this old devices...

Solved

The latest itunes for windows will not install

I have an old PC running windows and I want to transfer my itunes songs to my ipad. I can't do this until I update iTunes but trying to update does nothing, either from iTunes or from the web page. I've tried rebooting the PC, still doesn't work. How do I get iTunes to update? Or, how do I transfer to the iPad without updating? The version of iTunes I have is older than 10.5, not sure where to find version #. Thanks!

Hi b noir, thanks for offering to help. i documented the whole process:
Itunes transfer from pc to ipad.
1. Connect ipad to PC
2. Pc recognizes ipad as a camera, gives me list of programs to launch, not sure if this has any relevance, no itunes on list, instead its kodak easyshare, ms doc wizard, ms camera sharing, ms word,mp navagator ex, omnipage, photoshop - I ignore this screen
3. Launch itunes, get screen, "ipad requires v 10.5 or later' go to itunes.com. I click ok
4. I get screen, still in itunes, "a new version (10.7) is available." I click download.
5. That screen goes away but nothing happens. No download starts.
6. Checked itunes folder on my hard drive, no sign that anything new has downloaded
7. Launch safari, go to itunes.com, hit download button
8. Nothing seems to be happening.
9. I get "thank you for downloading itunes" screen.
10. Still nothing new in itunes folder.
11. Get AVG screen telling me to restart my pc to finish download process.
12. During shutdown, I get screen,"the instruction at 0x100066dd referenced memory at 0x100066dd. The instruction could not be read." Gave me options to terminate program or debug. I did not choose either. No idea if this is relevant.
13. PC rebooted anyway.
14. Launched itunes
15. Got same message as before - "ipad requires v 10.5 or later' go to itunes.com. I click ok
16. Even though ipad is plugged in all this time, the screen that thinks the ipad is a camera does not come up this time.
17. There is nothing to the left of the itunes interface that lists devices - this is where ipad would appear, right?
18. Ipad appears on My Computer control panel
19. My version of itunes is 10.3.1.55
20. In itunes, i go to Help - Run Diagnostics - run all but Cd/Dvdtest
21. Secure Link to Itunes store failed, everything before that is ok. I click Help. nothing happens. Store appears in itunes so I don't see why this would fail.
22. Since help doesn't work, I move on in test. Two more fail screens: itunes helper not running, no ipad found. help brings up appropriate pages for both. Both recommend removing and reinstalling itunes.
23. Device sync also fails.
If it would be quickest to delete and reinstall itunes, I am willing to do that. My music would not be deleted correct? What about playlists (not as important to me).
I also have all my music backed up to CD. It would be tedious to copy that all to ipad, but if there is a way to do it and no other option, I could do that.
Sally

Itunes for windows will not install

SInce Christmas, I have tried installing iTunes for my Ipod shuffle. I have NIS and I've followed some instructions I found on a thread to add itunes and ipod into my programs and "permit all"- that usually freezes the computer. I wind up sending error reports to windows and cold booting the computor. I think I successfully installed both itunes and ipod into My Computer/Downloads. However- - neither via shortcut on my desktop or thru programs can I access itunes. The icon is there, and nothing happens. I am pretty sure it has to do wit NIS. In one instance I did try disabling the security and firewall features- but a lot of crap got onto my desktop. help!

Kellie,
remind me, did you try an EWIDO scan? Sounds like a malware problem to me. Go download EWIDO, its free and the only program that I know of that is catching the particular variant of malware that is blocking iTunes. Its a nasty bug that started showing up in October or so.
The website is www.ewido.net/en/
Use that scan about twice a week. It blows Mcafee and Norton out of the water.
Good Luck.
PS I recommend picking up LsvaSoft's AdAware SE, its free and available for free downloads on their website. It scans and removes spyware. Use that twice a week as well to maintain a healthy PC.

ITunes for Windows will not start

I recently did a complete system restore and as part of my restore, downloaded a up-to-date copy of iTunes and installed it. The problem arises when I try to start the application. I don't get a Windows error message as one might expect. Instead I get the Windows request box asking whether or not I wish to submit the problem to Microsoft. Regardless of which option I chose, the box eventually disappears but no iTunes!!
I've tried uninstalling then reinstalling iTunes as well as clearing all traces of iTunes from my registery/computer files then reinstalling but to no avail. How can I get a clean install of iTunes that will actually run??
Thanks -- Rockey
P.S. Once I get iTunes successfully installed and plug in my iPOD, will all the music on my iPOD be automatically erased?? In my recent restore I did loose all my computer-based music files.
Dell Dimension E310 Windows XP Pro

You might try the method in this article on Trouble Installing iTunes:
http://docs.info.apple.com/article.html?artnum=93976
Start at: "Important: A majority of customers..."
This should allow you to completely remove the previous installation attemps.
For some reason installing the stand alone Quicktime seems to help in some cases.
iTunes can't work if Quicktime doen't run so it is important to be sure Quicktime is OK first.
Then there is this article on trouble shooting iTunes launch failures:
http://docs.info.apple.com/article.html?artnum=302856
The other thing is that if you done a complete Windows reinstall back to the factory settings, have you made sure you have the latest drivers and updates?

Safari for Windows will not log into IIS sites with Windows Authentication

Safari for Windows will not log into IIS sites with Windows Authentication enabled. The IIS log has thousands of login attempts from Safari that result in 401 errors.
I disable Windows Authentication on IIS and it works fine. The problem with that is that my Windows clients stop working properly with seemless logins when I disable this.
The expected behavior is that Safari will work with basic authentication when NTLM does not work. That would result in a password prompt followed by a successful login instead of Safari stopping at "Loading" while hammering the IIS logs.
It does this on all machines that I have tried.
Any ideas or is this a bug?

I noticed that as well. I have to wonder if it's due to not making note of the the different end of line characters between Mac OS X and Windows in code.

HT4839 the iPhone Configuration Utility 3.6/2.2 for Windows will not start up/load anymore.

Hello.
the iPhone Configuration Utility 3.6 for Windows will not start up/load anymore.
It worked fine at first, then I tried to start it up today and I got an error:
failed to create an ipc port access is denied
Now there is no message at all. Just wont launch.
I find NO support at Apple. I have seen about 20 other cries for help on these forums and no seems to have received any help for this. Does anyone know how to get this Utility working?
I am using Windows XP SP3
I have tried upgrdading to .NET 4 SP1 from .NET 3.5 SP1 and that didnt work so went back the other way and still no change.
I tried completely uninstalling and deleting all references in Regedit and reinstalling from the start about 4 times.
I tried completely uninstalling and then going back to an older version (2.2) and it doesn't work either.
Unfortunately there is no help on Apply that I can find and trying to find an -actual email support for Apple software or products is a joke- (man, nothing is more aggravating when you need product help and the provider hides or completely does away with any way to contact them for help ro sends you on an hour long search for it...)
I need to get this working as I am providing an easy iphone configure for my VPN service. Can anyone help?
THanks!!
Tres

Hello.
the iPhone Configuration Utility 3.6 for Windows will not start up/load anymore.
It worked fine at first, then I tried to start it up today and I got an error:
failed to create an ipc port access is denied
Now there is no message at all. Just wont launch.
I find NO support at Apple. I have seen about 20 other cries for help on these forums and no seems to have received any help for this. Does anyone know how to get this Utility working?
I am using Windows XP SP3
I have tried upgrdading to .NET 4 SP1 from .NET 3.5 SP1 and that didnt work so went back the other way and still no change.
I tried completely uninstalling and deleting all references in Regedit and reinstalling from the start about 4 times.
I tried completely uninstalling and then going back to an older version (2.2) and it doesn't work either.
Unfortunately there is no help on Apply that I can find and trying to find an -actual email support for Apple software or products is a joke- (man, nothing is more aggravating when you need product help and the provider hides or completely does away with any way to contact them for help ro sends you on an hour long search for it...)
I need to get this working as I am providing an easy iphone configure for my VPN service. Can anyone help?
THanks!!
Tres

Itunes 10.5 for windows will not burn cds. Can you help?

I installed the 10.5 version of Itunes and it will not burn blank cds.
System: MIcrosoft Windows XP 2002. 32bit. Service Pack 3.
Solutions Tried:
--Clean re-install of Itunes
--Downloaded GEAR drivers
--Deleted and re-added upperfilters to registry (with correct GEAR string)
--Tested CD burner (NERO works)
--Reinstalled CD drivers
I am unable to solve the problem. Any suggestions would be much appreciated.
BF

Thanks for the tip re. cntrl v. I've copied the diagnostics below.
I've tried all of Apple's troubleshooting advice without success. For example, my burner (and drivers and cables etc) all work fine. I've also tried all of their 'advanced' steps in relation to downloading GEAR drivers etc. Nada.
Microsoft Windows XP Home Edition Service Pack 3 (Build 2600)
System manufacturer System Product Name
iTunes 10.5.0.142
QuickTime not available
FairPlay 1.13.35
Apple Application Support 2.1.5
iPod Updater Library 10.0d2
CD Driver 2.2.2.0
CD Driver DLL 2.1.3.0
Apple Mobile Device 4.0.0.96
Apple Mobile Device Driver not found.
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.3.494
Gracenote MusicID 1.9.3.106
Gracenote Submit 1.9.3.136
Gracenote DSP 1.9.3.44
Current user is an administrator.
The current local date and time is 2011-11-15 07:16:17.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is not supported. (16005)
Video Display Information
Intel(R) G33/G31 Express Chipset Family
**** External Plug-ins Information ****
No external plug-ins installed.
iPodService 10.5.0.142 is currently running.
iTunesHelper 10.5.0.142 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** CD/DVD Drive Tests ****
No drivers in LowerFilters.
UpperFilters: GEARAspiWDM (2.2.2.0),
D: ASUS DRW-20B1LT, Rev 1.00
Audio CD in drive.
Found 21 songs on CD, playing time 76:48 on Audio CD.
Track 1, start time 00:02:00
Track 2, start time 02:57:29
Track 3, start time 07:15:42
Track 4, start time 11:14:32
Track 5, start time 15:31:65
Track 6, start time 18:07:38
Track 7, start time 21:10:55
Track 8, start time 24:25:15
Track 9, start time 28:10:66
Track 10, start time 31:00:04
Track 11, start time 34:48:61
Track 12, start time 38:26:67
Track 13, start time 44:06:13
Track 14, start time 47:07:49
Track 15, start time 51:46:37
Track 16, start time 54:25:14
Track 17, start time 57:44:50
Track 18, start time 62:22:03
Track 19, start time 65:06:48
Track 20, start time 70:30:43
Track 21, start time 73:17:08
Audio CD reading succeeded.
Get drive speed succeeded.
The drive CDR speeds are:   16 24 32 40 48.
The drive CDRW speeds are:   16.
The drive DVDR speeds are:   16.
The drive DVDRW speeds are:   16.
The last failed audio CD burn had error code 4450(0x00001162). It happened on drive D: ASUS DRW-20B1LT on CDR media at speed 4X.

I add songs to itunes, but ipod will not update!

I imported songs onto my itunes library. But when I plug it in the usb to update, it will automatically disconnect after 5 minutes, and the ipod will not update. I've tried adding all music, and just checked songs; both do not not work.
I have version 7.0.0.7
I have about 50% of room left on my ipod.
Any suggestions??

Hello Rex225
The best way to resolve the issue is to remove the music from the iPhone and then download the purchase again using the steps in the following article.
Downloading past purchases from the App Store, iBookstore, and iTunes Store
http://support.apple.com/kb/ht2519
Thanks for using Apple Support Communities.
Regards,
-Norm G.

Quicktime for windows will not play AVI

Hi. All I get when I play my .AVI's on Quicktime for windows is a white screen? No picture no sound?
They play fine on my Apple Mac Quicktime.
Thank

Hi TaylorFuhriman,
If you are having issues with video playback in iTunes for Windows, you may find the following article helpful:
Apple Support: Troubleshooting iTunes for Windows Vista or Windows 7 video playback performance issues
http://support.apple.com/kb/TS1718
Regards,
- Brenden

Itunes for windows will not update

Similar Messages

Maybe you are looking for