ITunes freezes with one iPod Touch (4g) but not the other.

I have two iPod Touch (4th gen) devices. One syncs fine when connected, but the other freezes iTunes when plugged in. The iPod works fine, and I've never had any trouble before. I also have an iPad 2 that seems to be syncing fine as well. I know my cable is ok, I've tried a few.  What's going on?

- Inspect the dock connector for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
Make an iCloud backup (see below). then go to Settings>General>Reet>Erase all content and settings.
- Restore from iCloud backup. See:                                 
iOS: How to back up           
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar          

Similar Messages

  • If i sign up for itunes match with one apple id can i get the other apple id songs

    if i sign up for itunes match with one apple id can i get the other apple id songs

    I'm assuming you mean can you access the purchased songs from another apple id.  No you cannot.  You will need to download these on another computer and then transfer the hard files into your itunes library that you are using icloud with and let icloud match them.
    You cannot access two different id's from one match account.  Also, if you sign out of the match account that you are signed into to another to download purchases you will not be able to sign back into your match account for three months.  So do not do this either.  Just use a friends computer or another way.

  • My PC recognizes one of my Nanos, but not the other

    I have two Nanos. My computer and iTunes recognizes one, but not the other.
    I have gone through all the trouble shooting steps on the second one, but it still doesn't register on my computer even though it shows the charging symbol.
    I am stumped. Can anyone help>

    Download and run this utility.  It should indicate what is wrong.  
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • BPC 7.5 MS Drill Down works on one dimension in rows but not the other

    Good day,
    Working in BPC 7.5 MS.  I have a piped report with 3 dimensions in rows.  Members in the first dimension are hard-coded in the expand range.  The second dimension is a combination of SELF and DEP members.  The third is set to SELF.  In our original AppSet, I can double-click drill down on both the second and third dimensions without issue.
    I've re-created this report in a new AppSet (same BPC version).  All settings are essentially identical (I've double and triple checked).  The drill down works on the second dimension, but not the third.  I've run out of places to look to find the problem.  Any thoughts?
    Thanks in advance.
    Kim

    It took a while but I finally found some quiet time to re-visit this issue.  Thank you for the suggestions above.  Ultimately I verified that the hierarchy, member selection and tables were all ok.
    My next step was to create a new EVDRE with the same members and slowly factor in the piping, membersets, etc.  Drill down worked appropriately.  So that told me something else was at work.
    Turns out the problem was with one of the 'display' columns to the right of the row key range.  These columns use formulas to display a triangle if the member isn't calc, thus giving the end user a visual clue that you can drill down on the member.  Long story short, BPC just didn't like that formula.  A minor change (along with some conditional formatting to replace the piece of formula that was removed) eliminated the problem.  Drill down is now working.

  • ITunes Freezes with my iPod Touch

    I don;t know why its happening but when I plug in my iPod to iTunes and then select something from my iPod's music or video library, it freezes. It doesn't freeze at any othe rpoint but only when I select or click something on my iPod's library not the Music Library in iTunes. Can anybody provide a clear explanation?

    If you restored to factory settings/new iPod and still have the problem that indicates a hardware problem. If you ony restored from backup try restoring to factory settings/new iPod
    Make an appointment at the Genius Bar of an Apple store..
    Apple Retail Store - Genius Bar

  • Why are my imessages showing up as my email adress to one of my contacts but not the others?

    When I use imessage there is one contact in my phone that recieves my messages from my email address... everyone else recieves them from my number exept him.  I want to be able to use my imessage without it going as my email to him.

    The problem is you are both using the same Apple ID.
    You should each have your own.
    Check the settings here:
    Settings > Messages > Send & Recieve > remove the number that doesn't belong
    This will fix the message problem but using the same Apple ID will also merge all iCloud items enabled on the device here:
    Settings > iCloud
    Such as:
    Contacts, calendars , reminders, pjjotos, bookmarks, etc...
    It can get quit messy. It is always best to use your own Apple iD if for nothing else but iCloud.

  • HP Officejet Pro 8500- prints wirelessly from one computer in network but not the other

    I can print wirelessly from my laptop, but not my desktop. The printer shows on the list, checked as the default, and READY, but document does not seem to find its way there. It never shows up in the print queue.

    Download and run this utility.  It should indicate what is wrong.  
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • I upgraded from elements 10 to 12 it transfered one of my catalogs but not the other

    How do i get a second  catalog transfered from elements 10 to my elements 12 the first one came down with the download

    CD1995 never fear help is here! You may need to cancel and re-add Family Base to get this fixed. Once you do so the following video should be very helpful in getting your Family Base set up correctly right from the start http://vz.to/1zq1bYP . Give this a try and keep us posted!
    BryanS_VZW
    Follow us at Twitter @vzwsupport

  • How do I turn off reminders in one MS Outlook Calendar, but not the other?

    I have my calendar and I also have a calendar (lets call it Shared Calendar) in which I copied all of my team's calendars into. I want to keep the Reminder alert on my calendar and turn off the Reminder alerts on the Shared Calendar.  How can I do
    this?

    Hi,
    Yes , like Rajitha said , the reminder comes from organizer. Unless the organizer uncheck Reminder in OWA or Outlook (File—Calendar—uncheck Default Reminder/change the reminder value to None
    directly when create an meeting) when we arrange the meeting.
    But if we do like this, all the user who be invited will lost the reminder.
    We can dismiss the reminder,  or single click an meeting in Calendar and then change the reminder value to “None” for single meeting 
    as workaround.
    Wendy Liu
    TechNet Community Support

  • I installed itunes 10.5 in my PC to sync with my ipod touch 4G but it's giving me error that itunes could not connect to itnues store.Make sure network connection is active and try again...I'm connected to internet though, please help!

    I installed itunes 10.5 in my PC to sync with my ipod touch $G but it's giving me error message that itunes could not connect to itunes store..."make sure network is active and try again." I'm connected to internet though so I don't understand please help!

    Close your iTunes,
    Go to command Prompt -
    (Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
    (Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
    In the "Command Prompt" screen, type in
    netsh winsock reset
    Hit "ENTER" key
    Restart your computer.
    If you do get a prompt after restart windows to remap LSP, just click NO.
    Now launch your iTunes and see if it is working now.
    If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
    iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
    http://support.apple.com/kb/TS4123?viewlocale=en_US

  • Hi, I have a problem with my ipod touch: I can not activate my ipod with my Apple ID, it tells me that my account can not activate this device, but my ID apple is OK and the ipod is mine, I have my ballot, HELP PLEASE

    Hi ...
    I have a problem with my ipod touch:
    I can not activate my ipod with my Apple ID, it tells me that my account can not activate this device, but my apple ID is OK.
    The proposed me as ipod help entering previous credentials, but the ipod is mine from the beginning, in fact I have my ballot, not bought down to another user.
    Actually I do not know how to activate it in Chile were unable Store MacOnline solve my problem, it is for this reason that I am writing to see if someone can help me.
    PLEAAASEEE
    Thank you.
    Sebastian

    Thanks for your answer.
    actually, my ipod will not let me activate it with apple id, this happened when the new iOS acutalizó understand that has more security, but do not know what to do.

  • I have 2 iPod touchs and 1 computer. It will reconize one but not the other. How do I get it to sync music on both

    I have 2 older iPod touches and 1 computer. It will reconize one but not the other. How do I sync music on both?

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Look at the dock connector on the iPod. Look for abnormalities like bent or corroded contacts, cracked or broken plastic.
    - Make an appointment at the Genus Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • Why do Outlook calendar invites appear on my iPod touch calendar but not my icloud calendar

    Why do Outlook calendar invites appear on my iPod touch calendar but not my iCloud calendar? I use Outlook at work and if I want to add events to the calendar on my iPod Touch which I use as a PDA I simply create the event in outlook select my gmail email address and invite myself. The event appears on my iPod Touch...all well and good...now with the advent of iCloud I would like to see all events on my iPod calendar on the iCloud calendar that I view on my PC. At the moment only events that I have added directly onto the iPod calendar appear on the iCloud calendar.
    I have messed around abit syncing and unsyncing, Turning the Calendar on and off in the iCloud setting on the device but nothing is really working. Any easy to follow suggestions or is it a trip to the geniuses in order?

    Not sure why you'd want to alter an artist name anyway but...
    In iTunes, right-click selected track and click "Get Info" then edit the artist field and possibly the album artist too (edit as in... make sure they have a value (the correct artist name)). Delete the faulty track on your iPod and then re-upload the new one.
    Another thing is that if you left the music player open on your iPod when you add the new track, sometimes I find that it doesnt find any of the new songs you add until you close and then re-open the app on the iPod.

  • HT2731 I have 2 apple iPods on the same account, And they have the Same songs on them. How can I get a new account for one of them but not the other? Can I wipe the memory of 1? How would I do that?

    I have 2 iPods one I don't use anymore. I would like to make a new account for one but not the other. Is that possible? If I wipe the memory in one will the other wipe out too? How can I do all of this?

    You don't have to do anything with the first iPod that you don't use anymore. If you are planning on keeping it, put in a drawer in your house and forget about it.
    You don't need a second account to use with the new iPod. I use one Appl e ID and iTunes library for two iPods, and two iPad. I have different content on all four devices. You can select exactly what you want to sync to each device and it can be different content on all devices.

  • "No connectivity with the server" error for one document but not the other, in the same document library

    We have a number of users all of a sudden getting "No connectivity with the server.  The file 'xxx' can't be opened because the server couldn't be contacted." errors trying to open MS Office docs (Word, Excel, etc.) in SharePoint with IE,
    just by clicking the link and selecting the "Read Only" option.  If they select the "Check Out and Edit" option, they can open the document no problem.  One of my customers gets the error on one document but not the other, in
    the same document library!  The older document (a weekly report) was copied and renamed as per standard procedure.  She can read the older document, but not the new one.
    It is definitely a profile issue, as other people have logged onto the machines of the users with problems and do not get the error.  We have also renamed people's c:\user profile folders and the corresponding Profilelist registry entry and the newly
    created profile does not experience the error for these people.  Renaming the profile back restores all their personal settings but the error reappears.  When we copied the old profile's folder structure into the new profile, many of the user settings
    were restored (but not all, like Dreamweaver settings) but the error did not appear.  We think that the system folders files (like AppData) weren't totally copied over so we're going to run another test using xcopy.  We are rebooting between
    logons to make sure all files are unlocked.
    The laptops and computers are mainly 32bit, Win7 Enterprise running IE9 and Office 2010 Professional Plus, but there's a few 64bit machines as well. The SharePoint farm has 1 WFE, 1 App Server running search and CA, and a shared database server running SQL
    2005 SP4.  SharePoint is 64bit MOSS 2007 with the latest CU.
    We've checked the logs on the client as well as on the server and there aren't any helpful entries.  We've also run Process Monitor, also with no helpful entries.  We're planning to run something like Fiddler next.
    It's not everyone, because there are many people are accessing the SharePoint system and the same files.  It is also not a permission thing, as we've tested by giving the users elevated permissions with no changes.  One person experiencing
    the errors is a Site Collection Admin.  That same person ran a test where I coped a simple Excel file into a Document Library which contained a problem file.  They were able to open it Read Only no problems that day, but the next day, the same
    file gave them an error.   In their case, they usually get a "xxx is not checked out" error and only occasionally get the "No connectivity with the server" error.
    We've tried lots of things including:
    Deleting IE cache
    Deleting SharePoint Drafts and webcache folder contents
    Running IE without add-ons
    Upgrading and Downgrading IE
    Uninstalling and re-installing IE
    Reinstalling our SSL certs
    Repairing Office
    Removing and then adding back in the Microsoft Office "Microsoft SharePoint Foundation Support" Office Tool 
    Deleting all HKLM and HKLU Office registry settings
    Toggling IE Compatibility Settings
    Toggling the IE Automatic Logon option
    Toggling the location of checked out files
    Adding the site in the trusted sites list
    Adding the site to the WebClient\Parameters registry locations
    Making sure the WebClient service is started
    Rebooting the machine (lol :)
    This is becoming a serious issue, not just because of the inconvenience for the users having to check out every document they want to read, but we have some files with macros that open up other documents to run which are now failing.  There aren't
    "check out" workarounds for some of those macros.
    We're planning to open a ticket with Microsoft, but I'm throwing it out here first in case someone has run into this before, or may have some suggestions on what to try next.  Thanks!
    -Richard.
    PS  I think this needs to be in the "General" forum instead?

    It took three days of dedicated troubleshooting, but I have found the cause of the errors, and a couple of fixes.  It helped tremendously that my own machine was throwing the error.  I have scheduled a couple of users to work with me to test the
    various fixes, to see which one works best, so the story isn't over yet.
    I had backed up my c:\users profile folder and HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList registry key so I could restore my profile after I was done.  I made a copy of the profile folder and was using that for awhile,
    but then made another copy where I had deleted a lot of content out of it so that the copies would go faster.  Since a newly created profile did not have errors, I was trying to copy back as much of the profile as possible to make it easier for our users
    to get back to work.  Instead of blowing away their profile and starting from scratch (which we know worked) I wanted to narrow down what was causing the error and just skip that from the restore.  The concept was to keep as much as the users profile
    in tact (application settings, etc.) not just restoring their desktop and My Documents folders.
    When we first tested a few weeks ago, simply copying the folder contents didn't reproduce the error.  I then tried xcopy, but got the "can't read file" error.  Then I tried robocopy, and ran into the "junction" problem. 
    I went back to xcopy, and found that placing the excludes.txt file in the windows/system32 folder eliminated the error.
    So the process went as follows: 
    Reboot and log into the machine as another user
    Delete the profile and associated registry key
    Reboot and log into the machine as the affected user, creating a new profile, and there is no error
    Reboot and log in as the other user
    xcopy the contents of the skinned-down backed-up profile to the newly created profile
    Reboot and log in as the affected user, and the error occurs
    Repeat the above, but add items in the excludes.txt file to see what, when eliminated, causes the error not to appear in the last step
    I eventually found that skipping the c:\users\<profile folder>\appdata\local\Microsoft\office\14.0 folder allowed the entire profile to be copied over without the error occurring.  That was strange, because we've cleaned out the cache folders
    before which didn't fix the issue. 
    So I went about it the opposite way, and tried to delete the 14.0 folder from the restored profile, and after reboot, the error still occurred.
    What eventually worked was deleting the 14.0 folder and copying over a 14.0 folder from a newly created profile!
    One way to do this was to:
    Reboot and log in as another user
    Rename the c:\users profile folder
    Rename the appropriate [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList] registry key
    Reboot and log in as the affected user, confirm that there is no error
    Reboot and log in as the other user
    Copy the C:\Users\<profile folder>\AppData\Local\microsoft\Office\14.0 folder to the other user's desktop
    Delete new profile folder, and rename the backup to be the production folder
    Delete the C:\Users\<profile folder>\AppData\Local\microsoft\Office\14.0 folder and then paste the 14.0 copy from the desktop
    Reboot and log in as the affected user, confirm that there is no error
    We've tried this on a couple machines and it works.  I had to run Windows Explorer as Administrator to access the other profile's folders.
    We've also successfully copied a 14.0 folder created by one profile on one affected computer over another profile's folder on another computer, eliminating the error, so we're trying that first, as that is fewer steps.
    We may attempt to script this, but the self-help instructions are only 5 lines long:
    Reboot and log into the affected computer with another account
    Go to <link to location of 14.0 folder on network> and copy the 14.0 folder
    Run Windows Explorer as Administrator
    Go to c:\users\<profile folder>\appdata\local\microsoft\office and delete the 14.0 folder, and paste the copied 14.0 folder (trying to overwrite it makes Win7 want to merge the folders)
    Reboot and log into your normal account, and confirm the error is gone
    I'll come back and report after we go into the field with this fix, but after the few tests, I am cautiously optimistic that this is it.

Maybe you are looking for

  • After 10000 images, Aperture begins to importing new images out of order

    Hi All, I'm at about 13,000 images and from time to time I noticed that whenever I imported images after 10,000...Aperture at that point had begun the numbering sequence over again, some of the images would wind up next to its identically numbered im

  • Sender File Adapter Can I  set original MessageID like SOAP Adapter??

    Hello,PI Experts!! I want to set original messageID(GUID) to Sender File adapter scenario. SOAP Adapter can set original messageID with url, about FILE Adapter?? I think Adapter Module maybe can set original messageID. best Regards, Yuuki Fujioka.

  • Cookie Value

    I set a Cookie like: response.addCookie(new Cookie("Name","hello")); and I try to get the value: cookie.getValue(); I will get: hello no problem! But when I set a Cookie with an String identifier like: String str = "hello"; response.addCookie(new Coo

  • Satellite A300 - inbuilt Chicony webcam won't work with Win Live Messenger

    Hello I just bought a *Satellite A300-1MC* (runs on Vista Home Premium), and downloaded Windows Live Mail And Live Messenger. The inbuilt webcam won't work with Live Messenger ; and when selecting Tool, Audi + Vieo Setup in Messenger I get thye follo

  • Safari Shutting Down Randomly

    Every time I view a page with a decent amount of content, Safari automatically shuts downs and gives me the choice the "Report", "Reopen", "Try Again", etc... Any help?