Itunes install error message - program not found ...x64/difxinst64.exe

itunes install error message - program not found ...x64/difxinst64.exe
no problems with ITunes on Dell Inspiron Windows 7 until yesterday. ITunes version 11.0.2. iphone won't connect stating required software is not installed. uninstall and install 64 bit version of iTunes. I have 64 bit version already. I have uninstalled and reinstalled 5 times already. When re-installing ITunes get error message c:\programdata\34be82c4-e596-4e99-a191-52c6199ebf6\x64\difxinst64.exe. file does not have a program associated with it for performing this action. please install or create an association in the Default Programs control panel. iTunes install continues after the difxinst64.exe error message but then get the iphone cannot be used error message again. therefore, I can't sync my iphone with iTunes until I figure this out.
can't win for losing. had iTunes on my windows 7 laptop for 4 years. first time I've ever encountered this.

I am a PC Tech and had a customer with this issue. Ran across this post in my search and ended up finding the solution on my own. The problem isn't with the iTunes software but the installer for the GEARAspi drivers. Really the issues is with the file type asssociations in the windows registry. On the system I was working on the HKCR key for .exe should point to the exefile key but pointed to nothing. To fix it create a new txt document and paste the following in (only paste what is in between the [code][/code] tags):
[code]
Windows Registry Editor Version 5.00
[HKEY_CLASSES_ROOT\.exe]
@="exefile"
"Content Type"="application/x-msdownload"
[HKEY_CLASSES_ROOT\.exe\PersistentHandler]
@="{098f2470-bae0-11cd-b579-08002b30bfeb}"
[/code]
Now change the extension from .txt to .reg. Then right click and select merge. iTunes should now install properly.

Similar Messages

Cannot install itunes. get error message program RSVCR80 not installed. windows error 126.

cannot update or install itunes. ger error message RSVCR80 not installed. windows error 126.

Hey sndlot,
Follow the steps in this link to resolve the issue:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
When you uninstall, the items you uninstall and the order in which you do so arearticularly important:
Use the Control Panel to uninstall iTunes and related software components in the following order and then restart your computer:
iTunes
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Important: Uninstalling these components in a different order, or only uninstalling some of these components may have unintended affects.
Let us know if following that article and uninstalling those components in that order helped the situation.
Regards,
Delgadoh

When I Update My Nano, I get error message, "file not found"

When I Update My Nano, I get an error message, "file not found, cannot update iPod". I have looked through the manual and tried reinstalling the iTunes program but it still won't update my iPod with music or pictures. PLease help.

Try these basic troubleshooting steps one at a time.
The Five Rs.

After installing SL: autochk program not found - skipping auto check

My MacBook was setup to dual boot Leopard/Win XP via Boot Camp, but I just formatted the Leopard partition and installed Snow Leopard in its place, which boots wonderfully, but now when I boot Win XP I get this error: "autochk program not found - skipping auto check"
Seconds later the machine automatically reboots.
I booted off the Win XP disk and ran chkdsk /p in the Recovery Console, but the "autochk not found" message still kills the Win XP boot.
Snow Leopard and Win XP are in different partitions on the same drive. I only formatted and reinstalled the Mac OS partition, I did not format or reinstall the Win XP partition.
Help?

I have the same problem. I had decided not to upgrade Parallels from version 3.0 since hardly (or almost never) use windows programs any more. I did want the option of using Boot Camp and Windows if ever needed though.
I installed Snow Leopard knowing that Parallels would no longer work and later did an uninstall. When I tried a restart to open Windows from Boot Camp I got the "autochk not found" message.
Searching around I discovered that Parallels changes the disk table so that the OS can only boot from within Parallels. The problem appears to be a way of changing the disk table back to a setting that will make it boot normally. There is a utility available for doing this on a windows PC, but I've found nothing for the Mac yet.
Without doing a complete re-install of Windows OS, I'm stuck for another solution.
In the end I may just have to erase the drive (the Windows partition) and be done with it for good. What upsets me is that Parallels should have created an uninstall utility that reverted the disk table back to normal boot settings.

Have upgraded to 6.0.2 on my MacBook and get error message "Server Not Found" everytime i use Firefox; however, if i then click on my Gmail or other sites from bookmark toolbar it connects. means an extra step and that never happened before

when i first click on Firefox the URL: www.27yhbnhy6tfgvrbcfre3.com shows up and the error message "Server not Found". but i can connect to any website by just clicking on a bookmark from the toolbar (or typing in a url). this never happened with previous versions of Firefox

A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
* https://support.mozilla.com/kb/Server+not+found
* https://support.mozilla.com/kb/Firewalls
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode

Safari 7.0.6 crashes: Dyld Error Message: Symbol Not Found

After I did the latest MacOS update (10.9.5) Safari (7.0.6) no longer runs. I repaired permissions and also rebooted in safe mode so I could potentially remove any spurious plug-ins, but the last time I did this was with MaxOS 6 so I have no idea where to look in the current version.
The error message that pops up is:
Process:         Safari [1279]
Path:            /Applications/Safari.app/Contents/MacOS/Safari
Identifier:      com.apple.Safari
Version:         ???
Build Info:      WebBrowser-7537085010017001~4
Code Type:       X86-64 (Native)
Parent Process: launchd [194]
Responsible:     Safari [1279]
User ID:         505
Date/Time:       2014-09-26 08:16:17.066 +1000
OS Version:      Mac OS X 10.9.5 (13F34)
Report Version: 11
Anonymous UUID: 84ADDFB5-CAD4-0759-3667-8E0B47E8E995
Sleep/Wake UUID: 51EC656E-25AB-4167-810D-D7A644340E28
Crashed Thread: 0
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Application Specific Information:
dyld: launch, loading dependent libraries, ignoring DYLD_* env vars
Dyld Error Message:
Symbol not found: __ZN3JSC10JSDataView6s_infoE
Referenced from: /System/Library/StagedFrameworks/Safari/WebCore.framework/Versions/A/WebCore
Expected in: /System/Library/Frameworks/JavaScriptCore.framework/Versions/A/JavaScriptCore
in /System/Library/StagedFrameworks/Safari/WebCore.framework/Versions/A/WebCore
(insert a 'shed load' of other lines of log data which you probably don't need, right?)

If you don't already have a current backup, back up all data, then reinstall the OS.* You don't need to erase the startup volume, and you won't need the backup unless something goes wrong. If the system was upgraded from an older version of OS X, you may need the Apple ID and password you used.
If you use FileVault 2, then before running the Installer you must launch Disk Utility and select the icon of the FileVault startup volume ("Macintosh HD," unless you gave it a different name.) It will be nested below another icon with the same name. Click the Unlock button in the toolbar and enter your login password when prompted. Then quit Disk Utility to be returned to the main Recovery screen.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
If you installed the Java runtime distributed by Apple and still need it, you'll have to reinstall it. The same goes for Xcode. All other data will be preserved.
*The linked support article refers to OS X 10.9 ("Mavericks"), but the procedure is the same for OS X 10.7 ("Lion") and later.

Acrobat Pro is now constantly giving me the error message (program not responding) when I try and perform any kind of action.

Acrobat Pro is now constantly giving me the error message (program not responding) when I try and perform any kind of action.

Hi cruzsanta03,
Can you please let us know the following:
- Operating System;
- Complete version of Acrobat installed;
- Experiencing this issue with a particular file or all PDF files;
- Experiencing this issue while performing a particular task or with any task;
- Files are saved on the local machine or on a share drive;
- Launch Acrobat in Safe Mode and then check the issue. Hold 'Shift' key and launch Acrobat, and then check the issue.

I try to boot the old T2150CDT - error message "sector not found reading drive C"

Hi,
I came by one of these and am trying to fire it up, but I keep getting the message, "sector not found reading drive C". I get this message right after the windows 98 logo appears.
Problem is that I'm limited in what I can do, because I have no floppy drive and dos doesn't recognize the CD Rom drive (drivers missing); although I can hear it during boot up.
So I took the HDD out and pasted the windows 98 installation files into it; then tried to reinstall, but I again get the "sector not found reading drive C" message. Is the drive too large, (It's about 2.1 gigs.)
Would installing the correct drivers for the CD Rom allow me to install from a CD?
this usually works
Thanks,
john

As far as I know the error message; sector not found reading drive C" appears because of these three different reasons:
- physical HDD fault
- corrupted HDD file system
- bad RAM
In first case you should try to format the whole HDD and should try to install the new OS.
If it will not help, the chances are that the HDD malfunctions and must be replaced.

Hp 5535 will not scan, error message printer not found

I have a HP Envy 5535. I have only been able to scan one time with it. I scanned 22 documents, after running HP Scan Doc 4.4. Each time the HP Scan Doc states that everything is OK, yet as soon as I try to do even a test scan, I get the error message "Printer not found." I have also tried to run this scan with my McAfee virus firewall off, and it still doesn't work. I have also identified it on McAfee as part of my network.
This question was solved.
View Solution.

Hi @prazdancr,
Welcome to the HP Forums!
I am sorry that you cannot scan with your HP Envy 5535, but I am happy to help!
For further assistance I will need to know:
If you are using a Windows or Mac Operating System, and the version number. To find the exact version, visit this link. Whatsmyos.
If the printer is connected, Wireless, or USB.
If the printer is able to make copies by itself.
If the power cable is plugged into a surge protector, or directly to the wall outlet. Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector. This applies to Inkjet printers as well.
In the meantime, please try going through this scanning guide. A 'The computer is not responding' Error Message Displays During Scanning.
Hope to hear from you soon, and have a nice day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Create_dynamic_table - error "Load program not found"

Hi experts,
i have receive error "Load program not found" at CALL METHOD cl_alv_table_create=>create_dynamic_table
Runtime Error          LOAD_PROGRAM_NOT_FOUND
Exception              CX_SY_PROGRAM_NOT_FOUND
Error analysis
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class 'CX_SY_PROGRAM_NOT_FOUND', was
neither
caught nor passed along using a RAISING clause, in the procedure
"FB_TABLE_CREATE_STRING" "(FORM)"
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
The reason for the exception is:
On account of a branch in the program
(CALL FUNCTION/DIALOG, external PERFORM, SUBMIT)
or a transaction call, another ABAP/4 program
is to be loaded, namely " ".
However, program " " does not exist in the library.
I'm stuck in this annoying problem,,,can anyone help me?

Hi Maroz,
I know this is not best practise to post my question in some others, but i have posted it separately earlier
Dynamic ITAB from Excel
I have created a dynamic ITAB from 1 Row of Excel Sheet
LOOP AT ist_excel INTO w_excel WHERE row = 2. " Contains the Values provided in 2nd row of Excel
    APPEND w_excel TO row1.
ENDLOOP.
LOOP AT ist_excel INTO w_excel WHERE row = 3. " Contains the Values provided in 3rd row of Excel
    APPEND w_excel TO row2.
ENDLOOP.
LOOP AT ist_excel INTO w_excel WHERE row = 4." Contains the Values provided in 4th row of Excel Etc
    APPEND w_excel TO row3.
ENDLOOP.
LOOP AT row1 INTO w_excel.
    CLEAR wa_it_fldcat.
    wa_it_fldcat-fieldname = w_excel-value .
    wa_it_fldcat-datatype = 'C'.
    wa_it_fldcat-inttype = wa_details-type_kind.
    wa_it_fldcat-intlen = 40.
* wa_it_fldcat-decimals = wa_details-decimals.
    APPEND wa_it_fldcat TO it_fldcat .
ENDLOOP.
* Create dynamic internal table and assign to FS
CALL METHOD cl_alv_table_create=>create_dynamic_table
    EXPORTING
      it_fieldcatalog = it_fldcat
    IMPORTING
      ep_table        = new_table.
ASSIGN new_table->* TO <dyn_table>.
* Create dynamic work area and assign to FS
CREATE DATA new_line LIKE LINE OF <dyn_table>.
ASSIGN new_line->* TO <dyn_wa>.
I followed the Link provided by to create a Dynamic ITAB
Please guide me how to pass these Value from excel to Dynamic Internal Table
Warm Regards
Ramchander

When I try to update LR I get an error message Application not found

When I try to update LR I get an error message "Application not found".
When I try Help in LR it can't be found.
What is wrong?

Talked with Adobe support. Told me to go to Cloud app and log out, then log
in again and then update. Worked fine for me. Hope this helps!
Best regards,
Fredrik Moell
Tomatis New Zealand
www.tomatis.co.nz
A division of Your Amazing Health Ltd
54 Fancourt Street, Meadowbank, Auckland 1072
0800-TOMATIS (866 2847)
Personal 021-1721 930

Getting error message file not found unable to sync to ipod

90 percent of my music from my playlists wont load to my ipod. It has loaded in the past nut now i get message file not found unable to sync. Meanwhile I can play all of this music out of itunes I just cant seem to load it to my ipod. why? all of the songs in the playlists seem to have an "!" next to them in the track list. That is until i play them then it goes away im not sure if these things are related but i think they may be. plaese help

+all of the songs in the playlists seem to have an "!" next to them in the track list. That is until i play them then it goes away im not sure if these things are related but i think they may be.+
Yes, I'm sure they are related. I have no idea how your PC/itunes got into that state. What's happening now, is itunes thinks it doesn't know where the file is on your PC's hard drive, but when you double-click it, it mysteriously finds it.
I suspect after itunes finds it again, it will load to your ipod.
Is this music on an external HD?

Error message: 'Codec not found..'

Hi all. This is a new error I've never seen before.
It's stopping me doing anything at all really.
As soon as I start up FCP and click on a sequence I get this message: 'Codec not found. You may be using a compression type without the corresponding hardware card.'
Then I click on OK and it says 'Error - Out of memory.'
I've heard rumours that it could be the fact I'm using a strange type of JPEG, but it still happens with PNGs.
I've made sure my scratch disks are all going to the right place. I also have 100gb of free space.
The version of FCP I'm using is 6.0.5. I'm using an iMac with OSX 10.4.11 (yes, I know it's old!) and I've downloaded the latest version of Quicktime.
Help, anyone? I have an assignment due in tomorrow.
Many thanks...

What formats are your sources and sequence? Have you tried resetting your fcp preferences?
https://discussions.apple.com/docs/DOC-2491
And here are some other troubleshooting steps
https://discussions.apple.com/docs/DOC-2591
We're here to help, but unless we approach this in a systematic manner, obvious things can slip thru the cracks. So go thru these things and just let us know if there's anything amiss.
I'm in NYC also, so if you are up against the wall, and feel like bringing your trusty macbook pro by my cutting room, I could probably take a quick look at it and see if there's anything obvious.

Error message: 'Codec not found. You may be using a compression type without the corresponding hardware card' - then - 'Error. Out of memory'

Hi all. This is a new error I've never seen before.
It's stopping me doing anything at all really.
As soon as I start up FCP and click on a sequence I get this message: 'Codec not found. You may be using a compression type without the corresponding hardware card.'
Then I click on OK and it says 'Error - Out of memory.'
I've heard rumours that it could be the fact I'm using a strange type of JPEG, but it still happens with PNGs.
I've made sure my scratch disks are all going to the right place. I also have 100gb of free space.
The version of FCP I'm using is 6.0.5. I'm using an iMac with OSX 10.4.11 (yes, I know it's old!) and I've downloaded the latest version of Quicktime.
Help, anyone? I have an assignment due in tomorrow.
Many thanks...

p.s. having looked at other posts, perhaps I am missing some (or all) of the relevant codecs?
In the folder Macintosh HD > Library > Quicktime
there is basically nothing. Do you think this is the problem?
If so, where do I download FCP codecs from?
Many thanks..

Many apps cannot open _dyld Error Message: Symbol not found:

Process:         Mail [9049]
Path:            /Applications/Mail.app/Contents/MacOS/Mail
Identifier:      com.apple.mail
Version:         ??? (???)
Build Info:      Mail-9360000~1
Code Type:       PPC (Native)
Parent Process: launchd [154]
Interval Since Last Report:          11138 sec
Crashes Since Last Report:           1
Per-App Interval Since Last Report: 0 sec
Per-App Crashes Since Last Report:   1
Date/Time:       2014-04-30 01:56:18.392 -0500
OS Version:      Mac OS X 10.5.8 (9L31a)
Report Version: 6
Anonymous UUID: 248FA523-9D8B-4D6F-90C7-8B85FAFB971A
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000001, 0x000000008fe0105c
Crashed Thread: 0
Dyld Error Message:
Library not loaded: /System/Library/Frameworks/WebKit.framework/Versions/A/Frameworks/WebCore.frame work/Versions/A/WebCore
Referenced from: /System/Library/Frameworks/WebKit.framework/Versions/A/WebKit
Reason: image not found

Did you attempt to use a 10.5 system specific installer over Target Disk Mode, or did you install with the 10.5 retail installer?
I am going to try it,
i have a OS X 10.5.6 DVD (last retail version of DVD Installer of Leopard),
10.5.8 only run Software Update version. (dmg file)
Are you using any utilities that affect system cache?
Like Onyx, IceClean, TinkerTool ?........... Yes.
Is your hard drive over 85% full?
Yes, my hard disk is too small, 40Gb, IDE

Itunes install error message - program not found ...x64/difxinst64.exe

Similar Messages

Maybe you are looking for