ITunes installation does not complete

When running ITunes8 (8.0.2.20) Setup (no other programs running), after passing the step Installation Options, I click o nthe button Intall.
At this moment I get the following message:
'There is a problem with this Windows Installer Package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor.'
Can anyone please halp me with that?
I'm getting crazy here...
Thanks in advance for our help.

Problems with Apple Software Update produce a similar but not identical error message. I might be worth trying the method for ASU problems.
Go to Add remove programs and find Apple Software update. Try repairing it.
Select Change>>repair.
If that works, try installing iTunes.
Otherwise try uninstalling any instance you find of Apple Software update. That probably will not work if repair didn't.
Next try an installer cleanup.
Download and install Microsoft Installer cleanup utility, there are instructions on the page as well as the download. Note that what you download is the installer not the program – you have to run it to install the program.
http://support.microsoft.com/kb/290301/
To run the program – All Programs>>Windows Install Cleanup
Remove any instance you find of Apple software update with the cleanup utility.
Download a fresh copy of the iTunes installer and save it on your desktop.
http://www.apple.com/itunes/download/
Restart your computer and try installing iTunes.

Similar Messages

  • Adobe CS6 re-installation does not complete

    Hi! After os update my Adobe CS6 re-installation does not complete. What do I need to do? Br. Heidi

    uninstall, clean and reinstall per Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

  • Appfabric installation does not complete successfully

    When I install the Sharepoint 2013 Prerequisites, Why I'm getting this error
    "AppFabric 1.1 for windows server installation did not complete successfully"

    Hello ,
    Could you please describe the problem in detail ?
    Also find the below workaround for same ...
    SharePoint
    2013 Prerequisites fails with MSI Installer error code 1603 while installing AppFabric 1.1
    Best Regards Kuldeep Verma
    Please remember to click "Mark As Answer" if a post solves your problem or "Vote As Helpful" if it was useful.

  • ITunes match does not complete step 2 - it locks at 2149 out of 2150 songs

    I'm trying to set up iTunes Match. Step 1 completes but Step 2 does not. It locks at the penultimate song - 2,149 out of 2,150. Not sure why or what to do. Any ideas anyone?

    Hi,
    It would seem that you may have corrupt file that is preventing completion. You need to find this track and delete it from your library. If you add icloud status column in song view, you will see what has been matched, uploaded or purchased. It will also show what is "waiting".
    jim

  • SCCM Client push or manual installation does not complete

    Hi All,
    I have deployed SCCM 2012 R2 in my lab environment. It has been deployed successfully. I have a issue in which the clients are not getting installed both manually and by pushing the agents via the console. 
    My servers are as follows:
    SCCMSVR.labtest.com  - Is the SCCM server and Fail back status point.
    Server.labtest.com - Is the Domain controller, SQL server
    SCCMTEST.labtest.com - A testing machine to push the client and to deploy patches in it.
    Site code is LAB
    I ran the setup using the following command.
    I have shared the ccmsetup in a share so the command is as follows:
    \\sccmsvr\Client\ccmsetup.exe /MP:SCCMSVR /Logon SMSSITECODE=LAB FSP=SCCMSVR
    But when i check the task manager the process of ccmsetup.exe but it does not change to CCMEXEC.exe
    I waited for an hour but still the same issue. (This was done in the DC Server.labtest.com)
    Screen shot of the DC  Machine:
    When i do a client push installation in a testing machine (SCCMTEST.labtest.com)  i still the same issue. I pushed the client still the same issue
    In the task manager the process of ccmsetup.exe but it does not change to CCMEXEC.exe.
    Screen shot of the second machine:
    Also checked the control panel. Dint find the config manager options there on both machines.
    Also turned off firewall on all 3 machines  but still the same issue.
    Analysed the event logs on all the servers. The client machines did not have any relevant events.
    The SCCM server had this event. Not sure if this is causing the issue.
    Event id 2344
    On 9/28/2014 3:26:48 PM, component SMS_DISTRIBUTION_MANAGER on computer SCCMSVR.LABTEST.COM reported:  Failed to create virtual directory on the defined share or volume on distribution point "["Display=\\SCCMSVR.LABTEST.COM\"]MSWNET:["SMS_SITE=LAB"]\\SCCMSVR.LABTEST.COM\".
    Possible cause: Distribution Manager requires that IIS base components be installed on the local Configuration Manager Site Server in order to create the virtual directory.  Distribution Manager also requires that IIS Web Services be installed on the Distribution
    Point Server that needs to support Background Intelligent Transfer Service (BITS).
    Solution: Verify that IIS base components are installed on the local Configuration Manager Site Server, and IIS Web Services are installed on the Distribution Point Server.
    Can any one please help.
    Gautam.75801

    Hi Kashif,
    Thank you for your valuable help. As you mentioned the IIS 6 WMI compatibility Feature was not installed. Once i installed and rebooted the SCCM server and pushed
     both the agents manually and by Pushing it via console and it succeed. How ever i got some errors on both the systems The trace log tool during the installation but it succeed.
    What i would like to know is that is it common to get errors like the below while pushing a agent automatically or manually ?
    1. MSI: Action 1:25:44: CcmRegisterComponentsRollback. In the event of a failed installation, this action rolls back the changes from CcmRegisterComponents.
    (Got this multiple times)
    2. MSI: Warning 25702. Failed to uninstall PrepDrvr.Sys for Software Metering Agent.
    3. Failed to load mdmregistration.dll. Continue deployment.
    4. Failed to load mdmregistration.dll with error 0x8007007e
    5. File 'C:\Windows\ccmsetup\WindowsFirewallConfigurationProvider.msi' does not exist. Discovery failed.
    6. File 'C:\Windows\system32\msrdc.dll' does not exist. Discovery failed.
    7. Enumerated all 1 local DP locations but none of them is good. Fallback to MP.
    8. Failed to check url http://SCCMSVR.LABTEST.COM/SMS_DP_SMSPKG$/LAB00002. Error 0x80004005
    9. Failed to correctly receive a WEBDAV HTTP request.. (StatusCode at WinHttpQueryHeaders: 401)
    10. As per the screen shot.
    Gautam.75801

  • Flash Player installation does not complete

    Help! I am at my wits' end! Windows 9, 32-bit. I have uninstalled older versions of Flash Player and appear to be downloading it but after several hours' waiting, am still on 'Step 2' of the download. Task Manager suggests install_flashplayer is a process but never completes. Have followed instructions on Adobe website, security to Medium, ActiveX Filtering off etc. Any ideas gratefully received.

    Download the Adobe Flash Player installer directly by right clicking the following link and selecting "Save target as".
    Flash Player for ActiveX (Internet Explorer)
    Save the file to your downloads folder or desktop, wherever you can find it - DO NOT run it yet.
    Reboot your system - a hard reboot - shut it down, waith 30 seconds and then restart it.
    BEFORE opening anything else, locate the downloaded installer and run it.

  • Wily Instroscope - OS Independent installation does not complete.

    I have been trying to install the wily introscope with the OS independent software and the install is not finishing. I see no errors, and I recieve no log file to show me if any part of the install was successful. The version 8 guide from Nov. 2008 states, that I should have an install directory containing a introscope log that shows me how many lines were Successful, Warnings, NonFatalErrors, and FatalErrors, but this is never created.
    I am running the install in /usr/sap/ccms/<sid_00>/wilyintroscope.
    I am installing this on a Solaris 5.10 SPARC x64bit system and I am running this in unix.
    I have copied the eula.txt, osgiPackages.v1.unix.tar, SAPISEM80_03-10007429.SAR, and SAPISMM80_03-10007429.SAR to this install location.
    I edited the eula.txt file to =accept, and I edited the install.properties file to contain the unix install path of /usr/sap/ccms/<sid_00>/wilyintroscope/.
    I had our unix team install a x64bit java version so I would have a java 5 VM as the install guide requires.
    This is the install command I kicked off as <sid>adm.
    /usr/jdk/jdk1.5.0_16 -classpath introscope8.0.2.0otherUnixSAP.jar u2013install
    It begins, but the installation will never finish. I had our unix support run a trace on the background proress and we see reads occuring, but after 2 hours it still isn't complete. I've even tried excuting the same steps with the x32 bit installation .bin file and I receive the same results.
    Do I need to edit the <sid>adm environment and point the wily home to my installation directory I created? In the Version 8 guide this is a later step, but at this point I am not sure what to do.
    Thoughts?

    Turns out the unix tar was corrupt. The clients virus scanner stripped out most of the file!

  • Mac OS Mavericks installation does not complete.

    Hi All,
    Does anyone have a solution for this install problem?
    When attempting to upgrade to Mac OS Mavericks from Montain Lion 10.8.5, the installation dialogue comes up, no errors are shown, then asks to restart the computer to complete the installation.
    The computer restats, log back in, and nothing happens.
    No installation dialogues, no error messages, it's just back to good ol' 10.8.5 like nothing happened.
    I've retried this 3 times, by opening the Mac OS Mavericks Install App to restart the installation, but this bad boy refuses to install.
    FileVault 2 is enabled,which I thought might be interfering with the install, but doing some googling around, it looks like Mavericks should install fine with FileVault active.
    In case it helps this is an early 2013 MacBook Pro 15" Retina notebook.
    Any ideas?

    Hi thanks for the quick reply.
    Yep may have to end up disabling FileVault, it's a last resort as it will decrypt the whole disk.
    Rebooted to the disk utility with disk verify and repair, no problems there. but at least the disk is fine

  • Installing Acrobat X - wizard is interupted, installation does not complete

    I am installing Acrobat X on a new Win 7 machine with no prior versions of Acrobat.  The installation gets close to the end and I get the message that "the wizard was interrupted before Acrobat Pro X could be completely installed".  The wizard exits and I can't install.
    Thanks for any help!!!

    That was it!  I deactivated Microsoft Security Essentials and the
    wizard finished the installation perfectly.  Thanks so much!

  • Creative Cloud Installer does not complete installation

    Hey Folks,
    I've been trying to install Creative Cloud, but the install stops mid way through installing the Adobe Application Manager. The Adobe Application Manager folder appears in the Utilities Folder, but has nothing in it. I then get this message.
    I've tried Uninstalling Adobe Creative Cloud, but even the Uninstaller hangs in the end and the window wont disappear.
    I've used the AdobeCreativeCloudCleanerTool and then tried reinstalling after restart.
    I've tried installing the stand alone version of the Adobe Application Manager with the same results. i.e. the the installer stops short.
    I also tried starting a new admin account on my computer and tried installing CC with the same results.
    As per advice from another post I tried changing the Library\Application Support\Adobe\OOBE folder name.
    I've also tried an exorcism, pouring boiling water into my lap and waving chicken feet over my computer, but no dice!!!
    Any tips or advice would be greatly appreciated. I'm on Mac 10.8.2.
    Cheers,
    Dave

    A chat session where an agent may remotely look inside your computer may help
    Creative Cloud chat support (all Creative Cloud customer service issues)
    http://helpx.adobe.com/x-productkb/global/service-ccm.html

  • After installing the latest itunes/quicktime update, I can no longer access the itunes store and my iphone does not complete syncing. What can I do to fix this?

    After installing the latest itunes/quicktime update I can no longer acces the itunes store nad my iphone does not complete syncing. What can I do to fix this?  I have tried uninstalling and reinstalling itunes.  I have uninstalled and reinstalled windows updates. I have checked the firewall settings. what else?

    The problem is with version 10.4.1.  I had to reload 10.3 to get it to work.  The recommendation from a previous poster worked for me.  Here was their list of steps:
    Go to Control Panel>Programs>Uninstall
    2.  Uninstall the following Apple programs in the following order:
         a. iTunes
         b. QuickTime
         c. Apple Software Update
         d. Apple Mobile Devices Support
         e. Bonjour
         f.  Apple Appllcation Support
    3.  Reboot PC
    4.  Find, Download and Install iTunes 10.3 (you can find it at FileHippo.com)
    If you start iTunes now you will get an error message saying that the current iTunes library was created by a newer version of iTunes.  To correct this:
    5.  Go to your Music>iTunes folder and delete the "iTunes Library.itl" database file
    6.  Within this iTunes folder find and open the "Previous iTunes Libraries" folder and locate the most recently dated "iTunes Library (date).itl" database file.
    7.  Copy and Paste this file back into the iTunes folder
    8.  Rename this "iTunes Library (date).itl" file by removing the date.  It should say "iTunes Library.itl"
    9.  Reboot PC

  • When I sync my phone it gets to step 6 the does not complete the sync i get a message that says itunes has stopped working and needs to close anyone else have this issue

    When I sync my phone it gets to step 6 the does not complete the sync i get a message that says itunes has stopped working and needs to close anyone else have this issue

    The same problem here!... My itunes stucks on "preparing to sync" when sync my ipad 2, and stucks on iphone 4 calendar sync...
    Any solution?? Need help, please!!
    Macbook pro 13 i7
    Iphone 4
    Ipad 2
    Thanks!!!

  • The new iTunes 12 does not have a rent tab. I've downloaded two movies which appear in the Movies folder on my Windows Explorer but not in the actual iTunes programme itself. Completely frustrating!

    The new iTunes 12 does not have a rent tab. I've downloaded two movies which appear in the Movies folder on my Windows Explorer but not in the actual iTunes programme itself. Completely frustrating! Where can I find these two movies to watch? It asked me once it was downloaded if I wanted to watch it but I wasn't ready to and now can't find where to play these again.

    When iTunes/iPod sync process failed due to timeout, the iPod, has only the initilaised  filesytem structure at the start of the Sync.
    The timeout failure could be due to
    Bad hardisk - do the iPod disk diagnostic, refer to this excellent post by tt2
    Slow USB port or resource - Dont use any USB hub, disconnect all other USB devices while syncing
    Timeout due to Antivirus or other plugins - disconnect from Internet and stop the Antivirus or monitoribng software if you are syncing.
    Preferably stop doing other things while syncing this ancient device, which the latest iTunes designer, think will soon be extinct.
    Have a nice day!

  • When I plug in my iPhone to sync, it starts but does not complete the process and several pieces of data are not being transferred to my iPhone from my MacBook Air.

    Problem:
    When I plug in my iPhone to sync, it starts but does not complete the process and several pieces of data are not being transferred to my iPhone from my MacBook Air.
    Any help that you can provide in helping my iPhone accurately sync with iPhoto and iTunes will be greatly appreciated.
    Symptoms:
    1)   Sync:  It’s not completing the sync.  Below, I’ve provided all of my settings from the iTunes Summary tab so that you might tell me if I’ve selected any incorrect options.  I prefer to sync the “old school” way – by connecting to the computer – as opposed to syncing over the cloud. Perhaps this is what’s causing the problem? Here is a list of the steps displayed in the iTunes window as the sync progresses:
    waiting for sync to start (step 1 of 7)
    backing up (step 2 of 7)
    preparing to sync (step 3 of 7)
    determining apps to sync (step 4 of 7)
    preparing apps to sync (step 5 of 7)
    importing photos (step 6 of 7)
    waiting for changes to be applied (step 7 of 7)
    syncing apps / copying 1 of 4 (App name) (step 7 of 7)
    canceling sync
    apple icon
    2)   Photos: I've selected only certain of my iPhoto albums to sync to my iPhone.  All of the albums are correct/complete in iPhoto.  All of the albums are listed on my iPhone, both before and after the sync, but the albums are empty (no actual photos) before and after the sync. Perhaps this is tied to the fact that the sync isn’t completing, but because “importing photos” is one of the steps that the incomplete sync displays, I don’t know.
    3)   Apps: When I launch iTunes and click on the Apps folder under the Library listing, then click on the Updates tab, iTunes searches for any Apps needing to be updated and provides a list.  If I click on Update All, the Apps are successfully updated in iTunes.  But, when I plug in my iPhone so that the updates will transfer to the apps on my iPhone, the updates don’t transfer to the apps on my iPhone and those apps still reflect that they need updating on the iPhone.
    Other Potential Pertinent Info:
    The flash memory hard drive on my MacBook Air recently died (perhaps a month or two ago).  Apple had emailed me about a known issue and literally the next day, my MacBook Air crashed.  I installed a new flash memory drive and re-installed everything from a backup off of an external hard drive.  Everything seems to be working fine; it recreated accurately all of my software and data, including iPhoto and iTunes, the pictures and songs (respectively) for which are stored on that hard drive, as opposed to being on the flash memory in the MacBook Air itself.  However, I don’t recall if the start of the sync problem described herein started happening at the same time that I replaced the flash memory drive.  All I know is that the computer is working perfectly in all respects and that even as the sync is failing, it at least says that it’s doing the right things and looking in the right places (e.g., the list of albums on my iPhone matches the list of albums in iTunes, etc.).
    Settings/Status:
    MacBook Air
    OSX v. 10.9
    iPhoto ’11 v. 9.5 (902.7)
    iPhone iOS 7.0.4
    iTunes v. 11.1.3 (8)
    Summary Tab
    Backups (This Computer)
    Options
    Automatically sync when this iPhone is connected
    Sync only checked songs and videos
    Photos Tab
    Sync Photos from iPhoto (429 Photos)
    Selected albums, Events, and Faces, and automatically include (no Events)
    Albums – 9 are selected

    You need to download iTunes on your computer. iOS 6 requires the latest version of iTunes which is 10.7.

  • So my Ipod touch hasn't been connecting to computer, or charging for a week or two until i turn it off completely and now i try to reset all content and setting, the circle goes round and round for like hrs(24) and it still does not complete the reset

    so my Ipod touch hasn't been connecting to computer, nor charging for a week or two until i turn it off completely and now i try to reset all content and setting,(thinking it may connect to the computer and itunes and also charge) but the circle goes round and round for like hrs(24) and it still does not complete the reset.
    pls pls pls pls help .
    i have tried alot of solutions, but non of them have worked.

    Have you tried walking it into the nearest Apple Store and asking for assistance there...?
    I'm guessing you don't have Apple Care on it.

Maybe you are looking for