ITunes is hogging 100% of CPU. Tried "netsh winsock reset" fix already

I recently upgraded to 10.5 and iOS5. I had a similar problem to many in the community related to the sync getting stuck in the "back up" portion, so I tried the solution proposed by a bunch of people re: "netsh winsock reset" and I can now sync, but I still have the issue of iTunes and APSDaemon hogging nearly 100% of CPU. Anyone else having the same problem? Any insight would be appreciated. Thanks

I'm having similar problems after the 10.5 upgrade on Vista. Tried the repair option in Control Panel, then uninstalled and did a fresh installation thinking it might have been due to the Apple upgrade installer but I'm still having the same problems. I've got 3gb of RAM but I can't even do something like writing an email at the same time as using iTunes without it beeping at me.

Similar Messages

  • ITunes store using 100% of CPU

    Since upgrading to iTunes 11.0.4, performance of the iTunes store has been horribly slow, taking 5 seconds to register a keystroke and using 100% or more of the CPU. Any idea what's up?

    Close your iTunes,
    Go to command Prompt -
    (Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
    (Win XP SP2 n above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
    In the "Command Prompt" screen, type in
    netsh winsock reset
    Hit "ENTER" key
    Restart your computer.
    If you do get a prompt after restart windows to remap LSP, just click NO.
    Now launch your iTunes and see if it is working now.
    If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
    iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
    http://support.apple.com/kb/TS4123?viewlocale=en_US

  • TS4123 I have problem with iTunes story (secure link to itunes store failed). I make In the "Command Prompt" screen, type in   netsh winsock reset the itune story is solve but after i close itunes the problem is back

    I have problem with iTunes story (secure link to itunes store failed). I make In the "Command Prompt" screen, type in   netsh winsock reset the itune story is solve but after i close itunes the problem is back

    The results show that you have a proxy server set and this can often cause problems with iTunes.
    The proxy setting can be accessed in Internet options>>Connections>>LAN Settings.
    Try un-checking the proxy server check box.
    It might also be a good idea to run a malware check if you didn't know you had the proxy server set.
    You can download a free version of an excellent scanner- Malwarebytes here:
    http://www.malwarebytes.org/

  • Every time i try to open itunes to update apps for iphone 4s i can never get it to open, i went to command prompt and did the netsh winsock reset, still cannot open itunes

    i cannot open itunes to update apps on my iphone. i did the command prompt-netsh winsock reset, still cannot open itunes.

    Try following steps and test one at a time:
    1. Check to see if this file APSDaemon.exe is the problem here.
    Close your iTunes.
    Press Ctrl-Alt-Del key and choose Task Manager. In the "Processes" Tab, select the file APSDaemon.exe and click End Prosses button, then close the task manager window.
    Now open itunes and see if it is working?
    If that works, to prevent having to do the same process everytime you restart Windows, go to. START button, type in
    MSCONFIG
    Hit ENTER
    Click STARTUP Tab, Uncheck "Apple Push", click OK.
    Restart Windows.
    2. If that fails or you don't see ApsDaemon.exe in the Processes, refer to following article to remove SC files:
    http://support.apple.com/kb/TS2363
    3. If that fails, repair or reinstall your Quicktime. START / CONTROL PANEL / ADD N REMOVE PROGRAMS / hightlight QUICKTIME, click CHANGE or UNINSTALL then REPAIR.

  • ITunes Using Up 100% of CPU

    For some reason iTunes was using 100% of my CPU, for some reason I thought the iTunes library may have been corrupt, making iTuunes use 100% of my CPU when I started it. So I deleted my .itl file and imported all of my music again, so now all my songs are in iTunes and it seemed to work. Then, as part of my settings, I turned on the souncd check, now iTunes uses 100% of my CPU and doesn't respond when I open it, how can I fix this?

    Sorry. I did a search, and a lot of threads came up. The one I chose, I thought, explained WHY it happened.
    Maybe you'd get answers more helpful to you, if you went throught the search results.
    Sorry I wasn't of any assistance.

  • My I touch gets very hot when charging, and it won't turn on.  I've tried all the resets/fixes and it does not respond.  Any Ideas?

    I have tried charging my itouch on the computer, in a docking station, and it gets very hot.  It won't turn on, even after trying all the resets I've read on this site.  Any ideas what the problem is?  Is it fixable?

    Hey Halefarm, What happens if you connect directly with the charging source with your cable, no docking station? Since resetting did not help, try connecting directly with the cable to your power source and your iPod. Next  try a different cable, there could be a short in the one you are currently using. If still will not charge correctly, I'm leaning in the direction of a failing battery. Set up an appointment to have your iPod evaluated by Apple. Have your iPod evaluated for possible battery issues. Take the cable and dock and have them tested as well. If it is a failing battery, you choices are; replace the battery, either through Apple or third party shop. Replace it yourself, if you can. Or,  you look into getting a new iPod. I don't have the cost of a new battery for an iPod 3, but I'm sure it's under $100. Check with Apple for exact pricing. Good luck, Cheers.

  • ITunes uses almost 100% of CPU and slows PC down

    Recently I decided to start using my iPod touch 4G again and downloaded the latest version of iTunes.
    Upon launch, iTunes acts normally until about 4-5 minutes of being open (just in idle). It then happily proceeds to use up 100% of my CPU load and slows my entire PC down to a halt, even once I've closed it (iTunes).
    I've tried re-installing it, downloading a different version, disconnecting from the internet, practically everything and yet the problem persists.
    My PC specs are as follows:
    Amd FX Piledriver 8-Core FX-8350 @ 4.0GHz
    Powercolour HD7990 Devil 13
    G-Skill 1866Mhz 16Gb memory
    OCZ Vector 128Gb HDD / WD Caviar Green 3TB
    So I can assure you, this is NOT hardware related.
    I've tried the following method with no results.
    1) Click Start and type "cmd" (without the quotes) DO NOT press enter or Ok yet.
    2) Right click "cmd" in the search results at the top of the start menu and select "Run as Administrator".
    3) In the command window, type "netsh" and press enter. (Without the quotes)
    4) In the next prompt, type "winsock" and press enter. (Without the quotes)
    5) In the next prompt, type "reset" and press enter. (Without the quotes)
    6) Reboot the PC. (Do not skip this step)
    I've also been through the list of conflicting software and have none of the mentioned.
    I'm running Windows 7 with the latest updates.
    I'm getting extremely frustrated now. ANY help would be appreciated.

    Sorry. I did a search, and a lot of threads came up. The one I chose, I thought, explained WHY it happened.
    Maybe you'd get answers more helpful to you, if you went throught the search results.
    Sorry I wasn't of any assistance.

  • Firefox 27 beta hogs 100% of CPU = 1 core on Mac

    I have latest Firefox beta on Macbook Pro with latest OS X. Firefox is started to it's Welcome page, and Activity Monitor shows 100% for Firefox, meaning it hogs 1 core. Right now FF is started in Safe Mode with all Plugins disabled, hardware acceleration disabled and empty cache. Still it's running at 105% doing nothing (just one tab, the Welcome page) and the fan is humming. This can't be normal.

    I found the culprit after further web searching: http://www.trusteer.com/products/trusteer-rapport
    Uninstall of this Rapport, and both Safari and Firefox CPU loads are back to normal and reasonable.

  • 2 GHz Pentium 4, 512 MB RAM, , iTunes running at 100% of CPU

    Is there any logical reason why my CPU is being completely (100%) dominated by iTunes? I've read a lot about people being upset with 60% usage when downloading songs and listening to music. I can't even watch a movie, with nothing running but iTunes, and without being connected to the internet. What can I do to make it a at least a little bit better? Please help!!

    Yes, it is. I would be happy just to get it down to 60% CPU usage instead of 100% when watching videos.

  • I have tried the following, "netsh winsock, reset", but I get a message that says the required operation requires elevation run as administrator . this is my laptop and I am an administrator, please help , itunes store is the only program i have issues

    I get a message that says, the required operation requires elevation <run as administrator>. I am the owner of this laptop and I have administrative authority, why does this show and how can I fix this. Itunes store is the ONLY program I am having trouble with.Very , very frustrating.!!!!!!!!!!!!

    I will assume you're using Windows Vista-7:
    Try these steps instead:
    1 Click start, and in the start menu search, type "cmd" (without the quotes) DO NOT PRESS ENTER!
    2. Right click the "cmd" search result
    3. Click "Run as Administrator"
    4. If you get a pop up message, click yes or continue
    5. Type the command in the window as you did above.
    In an effort to try to prevent programs from messing with your computer, programs don't run under your administrator account unless you tell them to or they ask. This gives the Administrator (elevated) privelleges that you need.

  • Itunes 100 percent CPU

    I am running Itunes and my CPU is running at 100% also when trying to go onto the iTunes Store it just says "accessing iTunes Store" and hangs there. There was an update available so I tried to update which resulted in getting an error when installing saying that MSVCR80.dll was missing. I then uninstalled itunes following all the steps removing :
    Itunes
    Apple Software Update
    Apple Mobile Device Support (if this won't uninstall press on)
    Bonjour
    Apple Application Support
    I downloaded the latest version of Itunes and installed it. I still have the same problem. I then tried using command prompt and  netsh winsock reset. Restarting the computer but this hasn't helped either. I then tried Autoruns from Microsoft Website to see if there was any other programs using Winsock, but the only one that is showing is Bonjour.
    Please can anyone help? I'm running out of ideas
    I am running itunes on Windows XP SP3. I've only just started to get this problem and I haven't installed anything new for a while (not counting itunes-which I only updated to try and fix the problem)

    Close your iTunes,
    Go to command Prompt -
    (Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
    (Win XP SP2 &amp; above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
    In the "Command Prompt" screen, type in
    netsh winsock reset
    Hit "ENTER" key
    Restart your computer.
    If you do get a prompt after restart windows to remap LSP, just click NO.
    Now launch your iTunes and see if CPU problem is fixed now.
    If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
    iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
    http://support.apple.com/kb/TS4123?viewlocale=en_US

  • Itunes uses 100 percent CPU....why

    Itunes 10  seems to be consuming 100% CPU on my Windows laptop when is activates.
    50% for itunes and 50% for Apple mobile processes
    This problem seems to have been around for ages as there are a plethora of 'fixes' advocated all which seem pretty hit and miss.
    Has anyone out there got a fix that is a 'stone waller'?
    getting to regret moving over to Apple iPhone \ IPad at the mo
    Diolch
    P

    Close your iTunes,
    Go to command Prompt -
    (Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
    (Win XP SP2 &amp; above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
    In the "Command Prompt" screen, type in
    netsh winsock reset
    Hit "ENTER" key
    Restart your computer.
    If you do get a prompt after restart windows to remap LSP, just click NO.
    Now launch your iTunes and see if CPU problem is fixed now.
    If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
    iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
    http://support.apple.com/kb/TS4123?viewlocale=en_US

  • Itunes uses 100% of cpu, Whats the deal?

    Is there any solution to this problem out there?

    Same problem on XP system.
    iTunes 10.5 installed. AppleMobileService.exe and iTunes now hogging 100% (50% each) of CPU.
    Tried complete de-install of apple software as per previous guidance for same problem with 10.4.
    http://support.apple.com/kb/ht1925
    This does not solve the problem with 10.5.
    Apple - anwers / software bug fix required please!

  • My itunes version 10.4 run very slowly.It get 100%my CPU.Please help me solve the problem

    My itunes version 10.4 run very slowly.It get 100% my CPU.please help me esolve this problem.

    Try the steps below,
    1. Quit iTunes.
    2. Go to Start Menu -> All Programs -> Accessories -> Right Click "Command Prompt" -> "Run as Administrator"
    3. Once in the command prompt, type "netsh winsock reset" and hit ENTER.
    4. Reboot your machine.
    5. Restart iTunes.
    Its working for me.

  • ITunes crashing when syncing with my iphone 3gs on a Vista machine post upgrade..have tried the netsch winsock reset but no luck...any ideas?

    Upgraded my iTunes to the latest version and upgraded my iPhone 3gs to IOS5. Unable to sync my iPhone with iTunes after upgrade and is getting stuck on Step1. I am running my iTunes on Windows Vista PC and have tried the solution of netsh winsock reset and still no luck.
    Also, I am not able to see any of my music on the phone post upgrade, but it shows on iTunes. Again not sure on how to make it appear on my phone. Any help would be much appreciated!!
    Cheers,
    Kishore

    my advice to you is to SWITCH TO SOMETHING BESIDES "VISTA"!!!!!!!!!!!!!

Maybe you are looking for

  • An error has occurred while loading the report

    Hello all, I'm trying to view a Crystal Report from my CRM application and I receive the follow error message, but only when trying to view it on a laptop: An error has occurred while loading the report. Please contact technical support. Has anyone e

  • Dynamic text, system fonts, and special characters...

    This one is boggling my mind so if someone can help, please do I've got a dynamic text area pulling text from a MySQL database via AMFPHP. The text includes special characters such as accents, umlauts, etc (multi-language site platform). Most of them

  • To Many PNG Files?

    Hi, I created my site is Photoshop, took the individual files and saved them as png24 files for a lossless bitmap, or so I thought. When I got to image # 13 or 14 my images started masking other images. Is there a limit on how many png files you can

  • Debug console keeps coming up errors?

    Debug keeps showing errors, it also kicks me offline after 10 min.

  • (Mavericks) Safari 7.1.5 history and google search

    If I click on a link on a google search result page, then the google search is not in history anymore. It is annoying.