ITunes locks up frequently during importing process

Problem started after successfully ripping about five CDs. Purged the start up sequence of programs that may have been intruding on the iTunes signal and that worked for a good spell. After ripping about 1300 songs, the problem started again and I'm getting tired of rebooting. I've tried the uninstall-reinstall option with no luck.

I just downloaded Itunes 7.4.1.2 and have been debugging freeze-ups (hard ones that require a full system reboot)as well.
Old or new CD's doesn't seem to make a difference.
Error correction or or off: no diff
EZDC creator 7.5 removed: no diff
All extraneous programs stopped (including AV): no diff.
New memory in my PC: no diff.
All other ripping software works OK (EAC, WMP, creative labs)
Then I changed from the AAC 256 Mbps encoding method to MP3 (320 Mbps) and so far, it hasn't frozen.
BTW, here's my CD diagnostic output.
+Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)+
+NVIDIA AWRDACPI+
+iTunes 7.4.1.2+
+CD Driver 2.0.6.1+
+CD Driver DLL 2.0.6.2+
+LowerFilters: PxHelp20 (2.0.0.0), drvmcdb (1.0.0.1), Cdr4_xp (7.5.0.47),+
+UpperFilters: Cdralw2k (7.5.0.47), pwd_2k (7.5.0.47), GEARAspiWDM (2.0.6.1),+
+Found aspi32 running.+
+Current user is an administrator.+
+Video Display Information:+
+RADEON 9600 SERIES+
+RADEON 9600 SERIES - Secondary+
+Connected Device Information:+
+Disk drive, MAXTOR ATLAS10K5_147WLS SCSI Disk Device, Bus Type SCSI, Bus Address [0,0]+
+Disk drive, QUANTUM DS10W SCSI Disk Device, Bus Type SCSI, Bus Address [1,0]+
+Disk drive, Apple iPod USB Device, Bus Type USB+
+Disk drive, Generic USB CF Reader USB Device, Bus Type USB+
+Disk drive, Generic USB MS Reader USB Device, Bus Type USB+
+Disk drive, Generic USB SD Reader USB Device, Bus Type USB+
+Disk drive, Generic USB SM Reader USB Device, Bus Type USB+
+Disk drive, Maxtor 3200 USB Device, Bus Type USB+
+CD-ROM Drive, PLEXTOR DVDR PX-708A, Bus Type ATA, Bus Address [0,0]+
+Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.+
+D: PLEXTOR DVDR PX-708A, Rev 1.12+
+Audio CD in drive.+
+Found 12 songs on CD, playing time 51:16 on CDROM media.+
+Track 1, start time 00:02:00+
+Track 2, start time 03:09:29+
+Track 3, start time 07:48:07+
+Track 4, start time 13:46:36+
+Track 5, start time 17:10:22+
+Track 6, start time 21:26:26+
+Track 7, start time 27:08:69+
+Track 8, start time 30:28:54+
+Track 9, start time 35:02:43+
+Track 10, start time 39:13:30+
+Track 11, start time 43:41:16+
+Track 12, start time 47:17:14+
+Audio CD reading succeeded.+
+Get drive speed succeeded.+
+The drive CDR speeds are: 4 8 16 32 40.+
+The drive CDRW speeds are: 4 8.+
+The drive DVDR speeds are: 4 8 16.+
+The drive DVDRW speeds are: 4 8 16.+
+Writing CD text is turned on in the preferences. If you're having problems burning CDs, try turning this preference off.+
--Dale

Similar Messages

  • Change/new/delete highlighting during import process

    Hi everyone,
    I intend to use SAP NW MDM to consolidate master data from external sources.
    During the import process, I would like to see a highlighting of all new, of all deleted and of all changed records. The reason herefore is the following: before I actually load the imported data into my MDM repository, I want to check the data. Just in case, some corupt data was loaded.
    Can I do this in the MDM Import Manager?
    Best regards, Daniel

    hi,
    Whenever an imported record is new or changed, a timestamp could be set (which is most likely set already anyway). After importing the data I could run a routine which shows me all records that have not been updated. I could then delete these records or set them as "inactive".
    What do you think about this workaround? Is it feasible in MDM?
    Yes this is feasible in MDM. Whenever one record is changed / updated by user, the record will be updated along with the timestamp.
    you can view this in data manager. 
    if you want to select some records and mark them as inactive, you have to create a field.
    hope this may help you,
    Regards,
    Srinivas

  • After itunes locked up after CD import (scratch), It now imports half speed

    I don't know if there is a "Safe" or "Limp" mode after a itunes lockup, but If someone has any ideas what could be causing this let me know. It was copying music from CD into itunes between 11-12X, but after it locked up that one time, after I rebooted and went on to the next CD (and every one since), it copys at around 4-6X. Any ideas besides re-install ?
    HP   Windows XP Pro  

    Microsoft Windows XP Professional Service Pack 2 (Build 2600)
    HP Pavilion 061 DM181A-ABA a305w
    iTunes 6.0.3.5
    CD Driver 2.0.4.3
    CD Driver DLL 2.0.3.2
    LowerFilters: AFS2K (3.1.21.0),
    UpperFilters: GEARAspiWDM (2.0.4.3),
    Video Driver: Intel(R) 82845G/GL/GE/PE/GV Graphics Controller\Intel(R) 82845G /GL/GE/PE/GV Controller
    IDE\DiskWDCWD400EB-11CPF0_____________________06.04G06, Bus Type ATA, Bus Address [0,0]
    IDE\CdRomSONYCD-RW__CRX215E5____________________6.1G___, Bus Type ATA, Bus Address [0,0]
    If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
    Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
    Current user is administrator.
    D: SONY CD-RW CRX215E5, Rev 6.1G
    Audio CD in drive.
    Found 13 songs on CD, playing time 39:56 on Audio CD.
    Track 1, start time 00:02:32
    Track 2, start time 03:28:27
    Track 3, start time 04:35:70
    Track 4, start time 08:29:10
    Track 5, start time 12:07:45
    Track 6, start time 13:43:32
    Track 7, start time 17:41:27
    Track 8, start time 20:17:37
    Track 9, start time 23:44:35
    Track 10, start time 25:43:25
    Track 11, start time 28:50:20
    Track 12, start time 32:45:07
    Track 13, start time 35:48:45
    Audio CD reading succeeded.
    Get drive speed succeeded.
    The drive CDR speeds are: 4 16 32 40 48.
    The drive CDRW speeds are: 4.

  • Itunes Locks up PC during Playlists

    My Itunes just started locking up the pc while playing songs, sometimes immediately sometimes after a few songs. It's been working fine for years. I have 10 gb in the library - don't think it's memory. I get no error messages
    David

    For Window computer
    Go to folder “My Computer”
    Hope you can see your iPod there and right click on the iPod
    Choose “Format”. Ensure the settings are at “Default” and that “Quick Format” is not checked (which may takes 1-2 hours)
    Now select “Format”
    Eject your iPod and do a Reset
    Open the iTunes 7 and click “Restore”

  • What do I do when iTunes doesn't open during restoring process for an ipod?

    I am following the prompts for restoring an ipod with a forgotten password. I have connected the usb cable to my computer and the usb and iTunes symbols appear but nothing else is happening. What do i do now?

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                         
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: How to back up     
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        

  • Designate form field type during import process Acrobat 10

    Is there a way for me to assign a type of form field to content in Word when I import it into Acrobat to create a form? Acrobat knows to create entry fields when I input underscores after text, and it knows to create digital signature fields when it sees the word "signature" followed by underscores.
    However, I'm having a problem with check boxes and radio buttons. I've been creating them manually, which means they're never exactly the same size or positioned exactly right. It's also very time-consuming. Is there something that indicates to Acrobat that it should create a radio button or check box, much like the underscores tell it to create an entry field?

    No there's not. But there are a number of things you can do to create fields that are the same size and quickly align, as discussed here just the other day: http://forums.adobe.com/thread/1087979?tstart=0

  • Oracle 10 -   Avoiding Duplicate Records During Import Process

    I have two databases on different servers(DB1&DB2) and a dblink connecting the two. In DB2, I have 100 million records in table 'DB2Target'.
    I tried to load 100 million more records from tables DB1Source to DB2Target on top of existing 400 million records but after an hour I got a network error from DB2.
    The load failed after inserting 70% records.Now I have three tasks. First I have to find the duplicate record between DB1 and DB2. Second I have to find out the remaining 30% records missing from DB2Target.
    Third I have to re-load the remaining 30% records. What is the best solution?
    SELECT COUNT(*), A, B FROM DB2TARGET
    GROUP BY A, B
    HAVING COUNT(*) > 2
    re-loading
    MERGE INTO DB2TARGET tgt
    USING DB1SOURCE src
    ON ( tgt .A=  tgt .A)
    WHEN NOT MATCHED THEN
    INSERT ( tgt.A,  tgt .B)
    VALUES ( src .A,  src .B)Thanks for any guidance.

    when I execute this I get the folllowing error message:
    SQL Error: ORA-02064: distributed operation not supported
    02064. 00000 - "distributed operation not supported"
    *Cause:    One of the following unsupported operations was attempted
    1. array execute of a remote update with a subquery that references
    a dblink, or
    2. an update of a long column with bind variable and an update of
    a second column with a subquery that both references a dblink
    and a bind variable, or
    3. a commit is issued in a coordinated session from an RPC procedure
    call with OUT parameters or function call.
    *Action:   simplify remote update statement                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

  • Unable to open the export file during Import ABAP phase on tar(System copy)

    Hi Experts,
    We are encountering the following error during Import ABAP phase on target system as we are performing system copy on target system as part of hardware migration(Data center migration).
    Scenario:
    Sourrce system -  BI- ABAP(7.01), Win 2003 x64 unicode,Oracle 10.2.0.4
    Target system - BI-ABAP(7.01), Win 2008 R2 unicode, Oracle 11.2.0.1
    Actually on source system the data has been generated using migration monitor by using table splitting option and transferred on target system thru ftp option.
    During Import process while selecting the Database installation type we have selected the installation method as "Standard systemcopy/Migration(load based)" and not checked the option "Start Migration montior Manually".
    As far as my concern this error has nothing to do with this selection.please correct me If i am wrong.
    T:\usr\sap\BWS\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20110428082000
    T:\usr\sap\BWS\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/701_REL/src/R3ld/R3load/R3ldmain.c#5 $ SAP
    T:\usr\sap\BWS\SYS\exe\uc\NTAMD64\R3load.exe: version R7.01/V1.4 [UNICODE]
    Compiled Feb 24 2009 23:41:07
    T:\usr\sap\BWS\SYS\exe\uc\NTAMD64\R3load.exe -dbcodepage 4103 -i test_MIGKEY.cmd -l test_MIGKEY.log -K
    DbSl Trace: ORA-1403 when accessing table SAPUSER
    (DB) INFO: connected to DB
    (DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
    (TFH) ERROR: Unable to open
    10.207.3.59\d$\ftproot\import_sap\BWS\ABAP\DATA\ARFCSDATA.TOC
    (TFH) ERROR: OS error message: Invalid argument
    T:\usr\sap\BWS\SYS\exe\uc\NTAMD64\R3load.exe: job finished with 1 error(s)
    T:\usr\sap\BWS\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20110428082003
    Kindly revert with resolutions and suggestions and any hint to the oss notes as we haven't found anything specific to this error.
    Regrds,
    Dheeraj

    \\10.207.3.59\d$\ftproot\import_sap\BWS\ABAP\DATA\ARFCSDATA.TOC
    Please check if above said file located under specified path where SAPINST searvhing for it ie at
    10.207.3.59\d$\ftproot\import_sap\BWS\ABAP\DATA. if this file dont exist them it may be the case that your export is not proper.
    Also check if user from which you have started this SAPINST is able to access
    10.207.3.59\d$\ftproot\import_sap\BWS\ABAP\DATA.
    Thanks..
    Mohit

  • How to update/replace Jars within sbconfig.jar during import

    Hi,
    I want to replace a jar file, used by java callout actions, during import. I am using WLST script to import configuration jar but cannot figure out how to replace jar file.
    That jar file contains environment specific properties which i intend to change as part of import, once config jar is uploaded and impoted within the same session.
    I have looked to Ref, ArchiveType, Refs, and ALSBConfigurationMBean, but cant figure out to replace specific jar file within imported config jar.
    Many thanks in advance!
    many thanks
    sal
    Edited by: sallo on 16-Feb-2010 07:40

    Hi vivik,
    I am already using custimization files to already to customize environment values etc. But what i need cannot be handled by the customization file.
    I want to replace a jar file (utility jar), already in the sbconfig jar, being referenced by Java Call out actions during import process. I am begining to convince myself that it is not possible to perform such action during import process. I have checked the MBeans API but not very helpful.
    I hope i have able to explain the problem here!
    many thanks
    sal

  • Unicode import process thru sapinst

    Hi  All,
    We are in process of CU&UC from 4.7->ECC 6.0, we have sucessfully upgraded to ECC 6.0  and in process of Unicode conversion process.
    1) We are exporting the DB  now  thru sapinst  , we had not found code page parameter for target system in General paramter and  we got to know that during import  we have to select target system as unicode is it ok.
    2) During Import process we have to select CI and DB instance also or only CI is enough... Please suggest.....
    Thanks,
    Subhash

    Hi Subhash,
    During the installation of NW04, you start installing central instance and then Database instance. For NW04s, if you install the central instance and the database instance is installed together in the sapinst.
    These two are always hand in hand.
    Regards,
    Jeff

  • ITunes 7.1 - Won't import music - lost imports?

    Is anyone else having this problem? I recently "upgraded" to 7.1 and have nothing but problems.
    When I try to import new folder or files, iTunes goes thru all the importing process but the music is nowhere to be found?! Add this to the fact that adding any existing files from iTunes to my iPod also takes forever.
    Even when I view the "Date Added" category - there is nothing there even though iTunes went thru the whole importing/analyzing process.
    Hey APPLE! This is why your customers are wary of trusting and installing these so-called upgrades!
    What the heck is going on? I want my iTunes back! Any help is always appreciated.
    iPod Video 60GB Windows XP iTunes 7.1.1
      Windows XP  

    SoundTaxi files created prior to v 2.2.7 do not play on iTunes v 7.1.1.5. Go to SoundTaxi and download trial version and use old license code to avoid paying again (so said AudioTaxi support). Workaround for old files and discussion here:
    http://forums.ilounge.com/showthread.php?t=193739

  • I tried to update my iPad to iOS7.04, during the process it requires me to connect my iPad to iTunes on my MacBook. Why is this so as I thought the whole update should be done via wifi? When I tried to stop it by force shut down, it couldn't allow me.

    I tried to update my iPad to iOS7.04, during the process it requires me to connect my iPad to iTunes on my MacBook. Why is this so as I thought the whole update should be done via wifi? When I tried to stop it by force shut down and restart the iPad again, it would still require me to connect to iTunes. It seems that there's no other way to go about it, anyone can advise? Thanks.

    Sorry no backup - no pictures.
    Yes phone will automatically backup to icloud when on wifi and phone is charge, but your phone storage was full so it stop backing up.
    Back up and restore your iPhone, iPad, or iPod touch using iCloud or iTunes - Apple Support
    iCloud: iCloud storage and backup overview
    When your phone was connected to your computer, you should've seen an autoplay which would've allowed you to import your pics to your computer as you would a digital camera Import photos and videos from your iPhone, iPad, or iPod touch to your Mac or Windows PC - Apple Support

  • HT4527 I am trying to transfer music files from one PC to another using homeshare and although I can view the music as a shared folder I cannot initiate the "import" process.  I have iTunes 11.0.1.12 on both computers so the help screenshots do not help a

    I am trying to transfer music files from one PC to another using homeshare and although I can view the music as a shared folder I cannot initiate the "import" process.  I have iTunes 11.0.1.12 on both computers so the help screenshots do not help as such

    Then stop trying to use HomeShare and use one of the other options listed in the document from which your question was posted.

  • When I installed iTunes 10.6 to windows 7, during the process i got this message -" There is a problem with this windows installer package. A program required for this install to complete could not be run"

    when I installed iTunes 10.6 to windows 7, during the process i got this message -" There is a problem with this windows installer package. A program required for this install to complete could not be run" and after that the setup closed automatically. Plaese tell me if any setting up of windows is in order.

    Try looking at the two previous discussions listed on the right side of this page with your same question.
    Also, try searching/posting in the iTunes forum since you do not have an iPod problem.

  • When i download iTunes during downloading process on messege shown:  An error occurred during the installation of assembly'Microsoft CRT.version="8.0.50727.6195 publicKey Token = 1f c8 b3 b9a 1e 18e 3b processo rArhitecture = x86.

    HELP PLS.......when i download iTunes during downloading process on messege shown:  "An error occurred during the installation of assembly‘Microsoft CRT.version=”8.0.50727.6195 publicKey Token = 1f c8 b3 b9a 1e 18e 3b processo rArhitecture = x86." please refer to Help and Support for more information. HRESULT: 0x80073712.
    when click ok it rolling back and start process download again. and at last this messege appear: Service‘Apple Mobile Device’ (Apple Mobile Device) failed to start. Verify that youhave sufficient privileges to start system services  with option
    Abort    Retry    Ignore
    i tried all option one by one but i did not success to download itunes.
    Please help .

    You should check Windows update for Service Pack update, if there is any.
    Otherwise, try to fix and update windows system filesas follows:
    Go to command prompt (START/ALL PROGRAMS/ACCESSORIES right mouse click "command prompt" and choose "Run as Administrator"
    type in
    sfc /scannow
    let Windows fix any system files that need to be repaired.
    Restart the computer if it did actually repair any files.
    Then do the download again.

Maybe you are looking for

  • After uninstalling internet explorer, how do I get hyperlinks in Outlook to open

    Yesterday, I uninstalled Internet Explorer in an effort to free up some hard drive space. Monzilla Firefox is my default browzer and works fine. After IE was uninstalled (using the control panel feature) hyperlinks in my Outlook email fail to open. W

  • Assign units with a script

    I am struggling to assign a "proper" unit from the unit catalog to my channels using a script. At the moment the "unit_string" property of my channels simply has a string e.g. "N" or "degC" written to it. I thought I would be able to return a unit ob

  • Can't set an alarm on Reminders.

    I recently got the iPhone 5s, and have been having trouble with setting an alarm on the reminders app. When I set the date and time for the alarm, I hit done and I can see when the alarm is set for under the task. After about 5 seconds, the date disa

  • Cant see the value in output file

    hello, iam not getting onevalue in output file when it is directly assigned for eg: gs_zcrmtab_scheme-quantity = '1' . plz help me regards,

  • Mac screen shots are pink

    Recently screen shots I take are covered in pink. Not all of them, just when I use the shift-cmd-4 to capture a portion of the screen. It will print pink also. There may be something else going on too. Sometimes when I view pictures on FaceBook, they