ITunes not displaying entire page w/Mavericks

It only allows me to see the top of the page in itunes when I enter full screen mode. Any suggestions?

i've seen that effect produced in earlier versions of itunes by the version of itunes not liking a third-party itunes plugin/add-on.
are there any itunes plug-ins/add-ons installed on that computer? if so, perhaps try running through the techniques from this document:
Troubleshooting issues with 3rd-party iTunes add-ons

Similar Messages

ITunes not displaying Talking Walking podcasts – how can I resolve this?

iTunes not displaying Talking Walking podcasts – how can I resolve this?
http://www.talkingwalking.net
Created on iWeb version 3.0.4
Mac OS X 10.6.8 (10K549)
Upgraded to Snow Leopard in August 2010 from Tiger.
Originally published 26 podcast episodes using IWeb to MobileMe and successfully had them in the iTunes store. Then upgraded to Snow Leopard and had consistent problems publishing through iWeb, with messages appearing saying that the site hadn’t published on MobileMe or that the upload had timed out.
This meant that I had to upload the whole site whenever I made a slight change or published a new episode. Some of the pages failed to completely load on the website, and none of the new episodes appeared in the iTunes store. However, it was still possible to subscribe to the new episodes through the website Subscribe button.
Earlier this year, the original 26 episodes vanished from the ITunes store.
At the end of June, I moved my server from MobileMe to Rage and subsequently the website publishes without any time out messages or pages not fully functioning. This means that when I come to make updates or add a new episode, I can speedily upload changes.
I have tried to resubmit the feed for the website to the iTunes store but Talking Walking still does not appear in the store (nor do any of the links to the individual podcasts from the website work), however, you can still subscribe to podcasts, but now only those uploaded since August 2010.
I have sent an e mail to iTunes explaining my dilemma but have had no reply.
Would welcome any suggestions as to how I can rectify this issue. Next year is the fifth anniversary of Talking Walking podcasts and it would be nice to see them available again through the iTunes store.
With thanks, Andrew
[email protected]

Your feed is at http://www.talkingwalking.net/public/Talking_Walking/rss.xml . It contains episodes running from 23 February 2008 to 20 September 2012 and when you subscribe to this feed in the iTunes application all the episodes appear. The link on your web page is to this feed, so subscribing from the page works OK,
Searching for 'Talking Walking' in the iTunes Store produces a lot of result, none of them relevant or yours. This rather suggests that your podcast has been removed from the Store - if the feed wasn't functioning for an appreciable time this would be a normal reason for removal.
if your feed was originally on MobileMe and you have moved it to another server you have to tell the iTunes Store about this by adding a special tag to the feed - details here:
http://www.wilmut.webspace.virginmedia.com/notes/podcast.html#move
If you did not do this - and it's now too late - the Store will have been stuck looking for the non-existent old feed, which will very likely get your podcast removed.
You mention seeing the web page for the Store page - it's not possible to check this unless you post the URL.
If the podcast has been removed from the Store you will have to re-submit it as a new one. Unfortunately there is a bug in the automated part of the submissions process which will tell you the feed has already been submitted, even when it's been removed. In order to get round this you will have to change the title of the feed slghtly. You can always change it back later provided that doing so does not change the feed URL - I think this may well happen if you are using iWeb, so be cautious about this.

Screen briefly flashes white but does not display the page when the Safari icon or other icons are tapped.

A problem has just started with my IPAD Air after 3 months of use.
If I try to open Safari by tapping on the icon the screen briefly flashes white but does not display the page.
Similarly if I try to open Settings page, Mail page, Calendar or Clock the screen just briefly flashes but the Apps do not run.
Some of the Apps do work on tapping the icon e.g. Maps, iBooks, Appstore, iTunes, Newstand etc.
I do have some website links which display when the icon is tapped e.g. John Lewis but some links do not work.
I have ensured that the ipad is fully charged, powered it off an on again, and cleaned the screen with a lint free cloth but the
same problem keeps occurring.

I saume you used a second display at one time, otherwise the Display settings wouldn't be treating your primary display as a secondary.
IF you open your System Preferences>Displays (-System Preferences) and click "Gather Windows" it should pull everything to the display on which you clicked it.

Preview App not displaying all pages

I am finding under Mavericks Preview App is not displaying all pages of some pdf's.
If you turn on thumbnails you can see and select all the pages but it's not possible to scroll down through all the pages. Weird and annoying...

First, before you do anything else at all, make a copy of your file as a backup. You said "Book" but I'm thinking you mean in one file, not a combined file InDesign Book (.indb) project.
Now you need to test to see if this is a program problem or a file problem.
Are the pages still there? Can you choose them from the navigation box in the lower left corner of the document window?
Is this happening with any other documents? If you export this file to .inx (Interchange format) then open that, do the pages display properly?
If it's happening in other docs, or if .inx doesn't solve the problem, look at how to replace your application preferences here: Adobe InDesign CS4 * Setting preferences

Print Problem - PDF is OK on Windows 7, but OK on Windows XP with "Acrobat Reader An error exists on this page. Acrobat may not display the page correctly. Please contact the person who created the PDF document to correct the problem."

I have received a PDF which prints fine in Windows 7 but with Windows XP I get "Acrobat Reader An error exists on this page. Acrobat may not display the page correctly. Please contact the person who created the PDF document to correct the problem." and a blank piece of paper passes through the printer. I appreciate that Windows XP is no longer supported but I would like to think that the solution to this problem is not too difficult!
I have tried Acrobat 9, 10 and 11.
Any advice (apart from use Windows 7! ) would be most welcome.
Many thanks.

If you use the same Adobe Reader versions with the same PDF on Windows 7 and XP, then I would expect the outcome to be the same.
Is this a local or online PDF?
If local, is the file really exactly the same?
If online, in what browser?

Error in Acrobat 8: An error exists on this page. Acrobat may not display the page correctly...?

Hi,
We perform the e-signing on any PDF using our custom e-signature plug-in. Once that's done, when we try re-opening the PDF in Acrobat version 8.0.0.0, we get the following error:-
"An error exists on this page. Acrobat may not display the page correctly. Please contact the person who created the PDF document to correct the problem"
Please note that this error occurs intermittently and is NOT observed in Acrobat 7 or 9. Also, when a plain PDF is opened (i.e. a PDF without any signature on it) then there is NO error.
Could you let me know what could be the issue here? I read it in Acrobat 8.1.3 release notes that such an error was a known bug in version 8.0.0.0 (http://kb2.adobe.com/cps/407/kb407016.html), but I am not sure of its cause.
Let me know your comments/suggestions.
Thanks!

I am getting the same error even in Acrobat version 8.1.3.
Additionally, I noticed that if we click on menu ‘Advanced->Sign&Certify->Preview Document’, then we get a notification as “This document is not PDF/SigQ compliant and may display inconsistently”. On clicking ‘View report’ on that notification, the below dialog pops up. It has errors listed as:-
Code 4000 : Unrecognized PDF content. The document contains PDF content or custom content not supported by the current version of Acrobat.
Code 4002: PDF content contains erros.
However, if we sign the PDF using default adobe signature functionality and reopen that PDF, the error does NOT come and the notification also says ‘This document is PDF/SigQ compliant’.
Can anybody please suggest what could be missing in the custom sign that we apply? Is it because of any of the missing fonts or any other resources?
Awaiting reply!
Regards.

Why is Safari not displaying some pages correctly?

Safari seems to be messing up again. Had this problem quite a while ago. It's not displaying some pages correctly.
Notice the 2 enclosed screen shots. I went to purchase something (no personal info in the jpgs)
Notice the W-Safari. Little trash cans by the purchase items missing as well as the submit button and a few other things. So I opened Chrome.
Notice in the W-Chrome, everything is displaying correctly.
I've had problems like this some time ago but I thought they were fixed.
Thanks for any suggestions or help.
Allen

Post a URL so what we can look at it.

Konqueror (KDE4.4) not displaying this page correctly...

Hi all,
I have been trying to follow the BBC's online coverage but Konqueror will not display this page...
http://news.bbc.co.uk/sport1/hi/olympic … 539357.stm
Can anyone confirm this is a rendering error?
Diesel1.
Last edited by diesel1 (2010-02-26 23:25:18)

diesel1 wrote:
Hi all,
I have been trying to follow the BBC's online coverage but Konqueror will not display this page...
http://news.bbc.co.uk/sport1/hi/olympic … 539357.stm
Can anyone confirm this is a rendering error?
Diesel1.
KHTML doesn't work, but I also have WebKit KPart for Konqueror which does display the page correctly.
I do have rekonq installed, but I prefer Konqueror over it. Yes I prefer Konqueror, even though rekonq is fine it's just doesn't feel right.
I hope that it either becomes more Konqueror like before becoming a KDE default browser or they just rebuild Konqueror to use WebKit.

While Installing this error is coming This Program can not display the pag

When I Try to Install SAP B1 8.8 on Win server 2008.
I am receiving this message.
This Program can not display the page
The website is encountering Problem
There might be a typing error in the address
At the time of Installation which site we need to access.
My Internet is working.
Still i am facing this Problem please suggest me what should I do.

HI Ram ,
Internet is not required while Installation .
Go through :
Re: SAP Business Installation
Thanks
Ashish

An error exists on this page. acrobat may not display the page correctly.

While opening a pdf document it shows an error as "An error exists on this page. acrobat may not display the page correctly. Please contact the person who has created this pdf to correct the problem". The pdf was made in 1.4 Adobe 5.x version. Any suggestions.

I suggest you contact the person who has created the PDF in order to fix the problem.

Reader 11.0.0.1 An error exist on this page. Acrobat may not display the page correctly. Please cont

"An error exist on this page. Acrobat may not display the page correctly. Please contact the person who created the PDF document to correct the problem."
Any ideas how to get rid of this? Realistically its not practical to contact them, nor the other 1,000,000 web site owners whom host pdf's.
I really would like to disable the pop up only.
Seem to get it on quite a few PDF's. This web page seems to have quite a few that produce the problem.
http://www.2010.cannell.co.uk/manuals/manuals_porsche.html
click on the link to the pdf, scroll down a few pages and it pops up.
I do not get the error when using reader 10, only the new 11.0.0.1 version.

Hi Pat,
No problem withthe link you supplied.
This is one that has the problem "948 Cayenne Owners Manual - 2008 - Turbo" http://www.2010.cannell.co.uk/manuals/manuals_porsche.html
Just FYI, I look after 8000 clients, have the same problem on 3 of my test machines.
All windows 7, 64 bit IE9 fully patched.
Using 32 bit IE
Testing prior to upgrade from 10 to 11

Firefox will only zoom text, not the entire page.

Hi. Recently I was using Youtube and ran into a bit of a problem. When ever I zoom the page it only zooms the text, not the entire page. Ive tested it on other pages like google.com and it workes fine and zooms the whole page. Also, when I use youtube.com. the page works perfectly, but I cant sign in because there are no cookies. Ive also tried uninstalling firefox and deleting the firefox folder but with no luck. This might be because I accidentally pressed CTRL and ? when I was typing as I ment to press shift.

Reload the webpage while bypassing the cache using '''one''' of the following steps:
*Hold down the ''Shift'' key and click the ''Reload'' button with a left click.
OR
*Press ''Ctrl'' + ''F5'' or ''Ctrl'' + ''Shift'' + ''R'' (Windows and Linux)
*Press ''Command'' + ''Shift'' + ''R'' (Mac)
Then try logging in ,it might solve the problem.
Let us know if this solves the issues you are having.
Thanks!

IR column Header value not displayed entirely during filteration

I have a IR, when I click any column Header and it shows the list of values as a dropdown.
some of them (which are larger) get cut off.. means the the entire content/value are not displayed within the dropdown. [width of dropdown is fixed and no of characters in the content/value is more..]
how can we fix this?
Also.. is there any we can increase the width of the Select List window when we click any column header in IR.
Thanks,
Deepak
Edited by: DeepakJ on Sep 15, 2011 4:08 PM

Hi,
jQuery is not included to Apex 3.2 by default.
If you have not include jQuery library's to e.g. your page template or page header, then it is not "installed".
You can run your app and inspect HTML source to be sure.
You can download jQuery and jQuery UI and place files to your HTTP server folder. Then load those in e.g. page template header.
Or use jQuery files from Google by placing to page template header.
<link type="text/css" rel="stylesheet" href="//ajax.googleapis.com/ajax/libs/jqueryui/1.8.16/themes/redmond/jquery-ui.css" />
<script type="text/javascript" src="//ajax.googleapis.com/ajax/libs/jquery/1.6.4/jquery.min.js"></script>
<script type="text/javascript" src="//ajax.googleapis.com/ajax/libs/jqueryui/1.8.16/jquery-ui.min.js"></script>Regards,
Jari

XML Publisher report output in RTF format does not display full page

Hi,
We have one XML Publisher report, the output of report in RTF format is not getting displayed in Full Page in normal way (MS Word -->View menu --> Print layout) but we can see full page display when we do MS Word -->View menu --> Outline.
Appreciate your valuable inputs on this.
Is this a template issue or any profiles needs to be set.
Thanks
Vijay

Do you have any header and footer on your template?
If you have any header and footer then try to adjust it as of to display full page.
Thanks
Yasar

Image is not displaying in page

hi frnds
i m uploading image , and then displaying image , but image is not displaying
this code written in ONINPUTPROCESSING and this code is working fine
but problem is this
the value if diplay_url is getting blank when it comes in layout
* To Display this image on BSP
CREATE OBJECT cached_response
              TYPE
                cl_http_response
              EXPORTING
                add_c_msg        = 1.
cached_response->set_data( lv_file_content ).
            cached_response->set_header_field( name = if_http_header_fields=>content_type
                                               value = lv_file_mime_type ).
            cached_response->set_status( code = 200 reason = 'OK' ).
            cached_response->server_cache_expire_rel( expires_rel = 700 ).
* generate GUID
            CALL FUNCTION 'GUID_CREATE'
              IMPORTING
                ev_guid_32 = guid.
            CONCATENATE runtime->application_url '/' wa_file INTO display_url.
            CONCATENATE 'http://siildev.siil.com:8001/' display_url INTO display_url.
            cl_http_server=>server_cache_upload( url = display_url
                                                 response = cached_response ).
here display_url ='http://siildev.siil.com:8001/sap(bD1lbiZjPTc3Nw==)/bc/bsp/sap/zprbsp_002/aa.jpg'
and in layout
<% DATA:     display_url    TYPE STRING. %>
<iframe src="<%= display_url %>" width="100%" height="500px">
</iframe>
and here   display_url is blank
so how i will get the value of display_url in layout
Edited by: Guptaprashant on Apr 16, 2009 12:49 PM
Edited by: Guptaprashant on Apr 16, 2009 12:50 PM

Hi,
according to your code, you define a local variable display_url in the layout of your page but without setting any value:
<% DATA:     display_url    TYPE STRING. %>
<iframe src="<%= display_url %>" width="100%" height="500px">
</iframe>
I guess, you have also a page attribute or local variable in your eventHandler named display_url.
So the local definition in the layout overrides the global page attribute an its value.
Use just the page attribute to set the value on initialization and display it in the layout.
Best regards,
CW

ITunes not displaying entire page w/Mavericks

Similar Messages

Maybe you are looking for