ITunes Producer: Error reading password from keychain ?

I'm using iTunes Producer 2.9 on Mac OS X 10.8.5
When I try to log in using my Apple ID (enabled for iBookStore) I get an error regarding keychain access.
Can you please point me to the right direction?

You can also use $(...)
bob_pw=$(cat /home/oracle/scripts/bob.pw)However, it may not be the best idea to supply the password with the executable since everyone will be able to see the password when doing a process listing with ps command. But you can use the following.
pwd=hr
sqlplus -s /nolog <<-EOF
connect hr/$pwd;
show user;
EOF

Similar Messages

  • Delete passwords from keychain access

    How to delete passwords from Keychain Access?

    In Keychain Access a password is an element in a key, for example an internet site that you log into will be contained in a file in Keychain Access. They are shown one per line.
    Inside that key will be the url location, username , password.
    You can highlight the relevant key / file  and control click on it and delete it.
    Just a cautionary note, if you no longer use it, it does no harrm to just stay there.

  • How do you recover passwords from keychain ?

    My password file was compromised. How do I recover my passwords from Keychain ?

    Launch the Keychain Access application. Double-click a password item in your keychain. Check the box labeled Show password. Enter your login password (or keychain password, if different) when prompted.

  • When I was talking on phone, suddenly the phone was switched off. i tried to switch it on but it gave the message....connect to itunes for set up.  when I connected it to itunes...it gave the message, itunes can not read data from this iphone, restore it

    when I was talking on phone, suddenly the phone was switched off.
    i tried to switch it on but it gave the message....connect to itunes for set up.
    when I connected it to itunes...it gave the message, itunes can not read data from this iphone, restore it to factory settings. It also said while restoring ypu will lose all media data but you can restore the contacts.
    I restored the factory settings....the phone was on recovery mode...it was verified by itunes and all that..but in the end it again said that iphone has some problem and can not function right now.
    after that when ever i connect it with itunes, it gives the message, it can not activate the iphone further, try again later or contact customer service.
    What to do now?????? Customer service people say..it is hardware problem

    If it's a hardware problem, then the phone will need to be replaced.
    There is no magic that can fix a hardware problem.

  • Fix for iTunes Producer error message?  Fixing unallowable image names in iBA Gallery

    In Gallery I had image names with unallowable characters, e.g. "photo name.jpg".  I changed the name to "photoname.jpg" and re-added it in Inspector>Interaction>Gallery Media.  It still appears as "photo name.jpg"???  Even in a new Gallery Widget? 
    I'm new here so please forgive me if I am violating any protocol.  I would greatly appreciate any guidence in correcting my error. 
    Thanks!!!
    Gene Yore
    aka eeyore

    Thank you vinnyvg! 
    While trying to respond to this iTunes Producer error message,
    "ERROR ITMS-9000: "File given does not match type JPEG Image because of these validation issues: ; Error=com.apple.jingle.leghorn.fileformat.ValidationError@5fd2c84f[userString=This<mailto:Error=com.apple.jingle.leghorn.fileformat.ValidationError@5fd2c84f[userString=This> file does not start with a start of image marker.]" at Book (MZItmspBookPackage)
    The delivery of your book ended in error because there are image files that do not match the file extension type.  Make sure that all image files inside the book file end with one of the following: .jpg or .png and that the image file itself matches the file extension type."
    I did have a few tif images which I converted to jpg. 
    But, I ran across this posting which suggested I had other problems with my naming convention. 
    https://discussions.apple.com/thread/4788489?start=0&tstart=0
    which says
    GeePeeGee
    This solved my questionRe: Uploading error codes - does anyone speak their tongue? 
    Feb 15, 2013 9:33 PM (in response to GeePeeGee)
    So, it turns out, the problem with these png-images is the NAME. There are no restrictions, to name your pictures, but when you intend to use them in iBooksAuthor, make sure, that there are no "wrong charakters" in the name. You may use a to z charakters, 1 to 0 numbers and "-" and "_". That's it.
    The file "St. Giles.jpg" has
    a) a ".", which is wrong and
    b) an empty space, which is wrong too.
    When you use screenshots, things are getting even worse "Bildschirmfoto 2013-02-08 um 08.02.   15.50.19".
    So, if there are error codes as specified, you have to go through the document, click on each and every image and then check the filename. As you see below, you must activate the image itself to see the filename (in this case the filename is corrcect)."
    eeyor

  • ITunes producer error 3000 character content of element "file_name" invalid. Can anyone help me out? This happens when i try and submit an epub file, i haven't had this before.

    Can anyone help me out? This happens when i try and submit an epub file, i haven't had this before. "iTunes producer error 3000 character content of element "file_name" invalid."
    This is the full message

    You really need to put your codes between the
    [\code] tags
    see http://forum.java.sun.com/features.jsp#Formatting
    for more infoCode tags might make it look a little better, but there's still too darn much code. We're volunteers, after all. It'd be a lot of work to review all of this stuff. Can you demonstrate your problem with something smaller? Learn out how to do a combo box with just a page or two and then appy that to your big problem. That's how I'd do it. - MOD

  • Has anyone been able to upload an ibooks file with audio only files (m4a) in it? I keep getting the following error message during the upload in iTunes Producer: ERROR ITMS-9000: "Files of type audio/x-m4a are not allowed outside of widgets.

    Has anyone been able to upload an ibooks file with audio only files (m4a) in it? I keep getting the following error message during the upload in iTunes Producer: ERROR ITMS-9000: "Files of type audio/x-m4a are not allowed outside of widgets. then it names the file as an m4p file. Everything works beautifully on the iPad through Preview, and validates through iTunes Producer up until the attempted upload. If you've been able to accomplish this, please let me know how you prepared your audio files. Many thanks.

    Hello Fellow iBook Authors!
    Today I received the same error that you all have been discussing.  I tried selecting the DRM
    and this did not work for me, though I'm glad it did for some.  Here's what I did as a work-around. . .
    Since iBooks Author did not have a problem with Videos, I simply used one of my video programs, ScreenFlow to turn the audio into a video file m4v.  I added an image and extended the length or timing of the image to span the length of the audio file.  Then exported as an .mov.  I then opened QuickTime and opened the file and exported the file to iTunes. 
    You can use iMovie, Camtasia or any other progam that will allow you to export the audio as a movie file.  Does this make sense?  I hope this helps, at least in the short-term.
    Michael Williams

  • Export with Table Splitting : ORA-01115: IO error reading block from file

    Hello,
    We are in perfroming the last dryrun of our CU&UC conversion.
    The are now in the process of exporting the ECC6 system (Oracle 10.2.0.4.0, HPUX ia64) using sapinst features, "table splitting preparation"
    When doing so, we are facing critical errors :
    Creating file /export_uni/sapinst_splitting/ora_query3_tmp3_1.sql.
    ERROR 2010-08-11 10:27:28.881
    CJS-00084  SQL statement or script failed. DIAGNOSIS: Error message: ORA-12801: error signaled in parallel query server P002
    ORA-01115: IO error reading block from file 90 (block # 16640)
    ORA-27072: File I/O error
    HPUX-ia64 Error: 22: Invalid argument
    Additional information: 4
    Additional information: 16640
    Additional information: -1
    ORA-01115: IO error reading block from file 90 (block # 16640)
    ORA-27072: File I/O error
    HPUX-ia64 Error: 22: Invalid argument
    ORA-06512: at "SAPR3.TABLE_SPLITTER", line 775
    ORA-06512: at line 1
    I have therefore perfmed a dbverify ; no corruption has been recorded.
    When trying to perfrom the EXPORT, without table splitting ; it works fine ...but the processing time is extremely long, as you can imagine. Any help would be highly appreciated.Regards.
    Raoul

    Thank you Stefan,
    Our HPUX Release seems to be indeed 11v3,
    [root@:/root]# uname -a
    HP-UX B.11.31 U ia64 2566039091 unlimited-user license
    I'll check the installation of the  patch and keep you informed
    Thank you
    Raoul
    Edited by: Raoul Shiro on Aug 11, 2010 11:57 AM

  • Error reading data from static cursor cache.

    Hi,
    Does anyone know what causes this error below. It just started happening out of the blue. I'm running Apache Tomcat 4.1 on Win 2000 server with MS SQL Server 2000 database.
    Error:
    java.sql.SQLException: [Microsoft][SQLServer JDBC Driver]Error reading data from static cursor cache.
    Thanks,
    TR

    hi,
    i had a similar sort of error, something along the lines of "error setting up static cursor cache" using the SQL JDBC drivers on Win2K. i deleted the file entries in the TEMP folder of c:\documents and settings\<user>\Local Settings\TEMP and everything was cool after it. i'm not sure what the exact issue is (probably something like maximum folder size had been reached). i ran the FileMon utility from www.sysinternals.com and it reported a DISK_FULL error on a temporary file being read by the process. to cut a long story short, everything is NOW cool.
    cheer,
    dara

  • HTTP-500 Error Reading Data from Client!!

    I'm trying to create a page where by clients are able to contact us through the portal. So, it's a pretty basic form where I have a text box for the subject, and a text area for the message body.
    My problem is when the message body is over a certain size, I'm getting a "portlet cannot be contacted" on my screen. The Apache log comes up with the error:
    [error] mod_plsql: /pls/portal/!PORTAL.wwpob_page.show HTTP-500 Error Reading Data from Client!!
    I'm not using a windows OS, so the bug that has been talked about previously talked about shouldn't be the problem.
    Also, I am using a POST rather than a GET, so I don't think it has to do with the browser (and I have tested this on Firefox and IE 5.5 and IE 6).
    Would appreciate any advise.
    Thanks, Nicky

    Are you using SSL? Maybe, it has to do with it. I encountered a similar problem. It turned up that this read error occurred inside Apache and was caused by a nonstandard-SSL-request by Internet Explorer. te remedy was to add this to the Apache configuration:
    SetEnvIf     User-Agent     ".*MSIE.*"     \
    nokeepalive ssl-unclean-shutdown downgrade-1.0 force-response-1.0
    It tells Apache to switch to HTTP/1.0 and to never keep open socket connections with MSIE on SSL connections.
    Lycka till!

  • Error reading data from the MS Dos Console.

    Hi,
    We have a legacy application which is launched via a 3rd-party Telnet Server - the app acts as a remote shell for an RF device. The system has been functioning for many years but now we have migrated to Server 2012 the system no longer launches.
    The RF device successfully connects to the telnet server, logs-in with embedded credentails but drops the connection when the shell application is launched.
    The server has the following Application error
    Error reading data from the MS Dos Console.
    The pipe has been ended. 109 (0x6d)
    The application can successfully be launched locally outside of the shell on the server. The error is reproducable across RF devices and desktop telnet connections.
    The firewalls are off.
    Are there some additional protections in Server 2012 which would cause the pipe-based link to be stopped when launching the exe? Am I missing something? The 3rd-party telnet server is certified for Server 2012.
    Thnak you

    I'd ask in the
    Windows Server General Forum, or ask the third party vendor.
    Karl
    When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer
    My Blog: http://unlockpowershell.wordpress.com
    My Book:
    Windows PowerShell 2.0 Bible
    My E-mail: -join ("6B61726C6D69747363686B65406D742E6E6574"-split"(?<=\G.{2})",19|%{[char][int]"0x$_"})

  • Error reading SAP_XIAdapterFramework from SLD

    Hi,
    I am working with JDBC to RFC scenario. Where i am getting the following error in sxmb_moni -
    error reading SAP_XIAdapterFramework from SLD
    The problem is i couldn't post any data to RFC from XI.
    Please help.
    Thanks in advance!!
    Sudheer

    I have tried the things mentioned by you but still i couldn't solve the problem.
    When i try sending the data, moni shows it is successful but the data is not available in R/3.
    Now it is not showing the error - error reading SAP_XIAdapterFramework from SLD
    But still the data is not passing into the receiver system.

  • ITunes Producer Error -- Rejecting my ePubCheck-approved file

    I created a fixed-width ePub (approved thru ePubCheck). But when uploading through iTunes Producer I get this: "ERROR ITMS-9000: META-INF/container.xml in sample-photo-book-portrait.epub must contain one and only root file reference. at Book (MZItmspBookPackage)"
    My container.xml seems fine:
    Any ideas???? Honestly, I'm at a total loss here and am in desperate need of help!

    I have the exact same error from iTunes Producer... my container also seems fine...
    <?xml version="1.0" encoding="UTF-8"?>
    <container version="1.0" xmlns="urn:oasis:names:tc:opendocument:xmlns:container">
       <rootfiles>
          <rootfile full-path="book.opf" media-type="application/oebps-package+xml"/>
       </rootfiles>
    </container>

  • Error reading data from Infocube using shell script.

    Dear all ,
    I am facing a problem while reading data from an infocube using a shell script.
    The details are as follows.
    One of the shell script reads the data from the infocube to extract files with the values.
    The tables used for extraction by the shell script are :
    from   SAPR3."/BIC/F&PAR_CUBE.COPA"     FCOPA,
           SAPR3."/BIC/D&PAR_CUBE.COPAU"    COPAU,
           SAPR3."/BIC/D&PAR_CUBE.COPAP"    COPAP,
           SAPR3."/BIC/D&PAR_CUBE.COPA1"    CCPROD,
           SAPR3."/BIC/D&PAR_CUBE.COPA2"    CCCUST,
           SAPR3."/BIC/D&PAR_CUBE.COPA3"    COPA3,
           SAPR3."/BIC/D&PAR_CUBE.COPA4"    COPA4,
           SAPR3."/BIC/D&PAR_CUBE.COPA5"    COPA5,
           SAPR3."/BIC/MCCPROD"      MCCPROD,
           SAPR3."/BIC/SCCPROD"      SCCPROD,
           SAPR3."/BIC/MCCCUSTOM"    MCCCUSTOM,
           SAPR3."/BIC/SCCCUSTOM"    SCCCUSTOM,
           SAPR3."/BIC/SORGUNIT"     SORGUNIT,
           SAPR3."/BIC/SUNIMOYEAR"   SUNIMOYEAR,
    /*     SAPR3."/BI0/SFISCPER"     SFISCPER, */
           SAPR3."/BI0/SREQUID"      SREQUID,
           SAPR3."/BI0/SCURRENCY"    SCURRENCY,
           SAPR3."/BIC/SSCENARIO"    SSCENARIO,
           SAPR3."/BIC/SSOURCE"      SSOURCE
    The problem is that the file generation by this script (after reading the data from teh infocube) is taking an unexpected time of 2 hours which needs to be maximum 10 mins only.
    I used RSRV to get the info about these tables for the infocube:
    Entry '00046174', SID = 37 in SID table is missing in master data table /BIC/MCUSLEVEL2
    Entry '00081450', SID = 38 in SID table is missing in master data table /BIC/MCUSLEVEL2
    and so on for SID = 39  and SID = 35 .
    Checking of SID table /BIC/SCUSLEVEL2 produced errors
    Checking of SID table /BIC/SCUSLEVEL3 produced errors
    Can you please let me know if this can be a reason of delay in file generation (or reading of data from the infocube).
    Also , Please let me know how to proceed with this issue.
    Kindly let me know for more information, if required.
    Thanks in advance for your help.
    -Shalabh

    Hi ,
    In continuation with searching the solution to the problem , I could manage to note a difference in the partition of the Fact table of the infocube.
    Using SE14 -> Storage Parameters, I could find the partition done for the fact table as :
    PARTITION BY: RANGE
    COLUMN_LIST: KEY_ABACOPA
    and subsequently there are partitions with data in it.
    I need to understand the details of these partitions .
    Do they correspond to each requests in the infocube(which may not be possible as there are 13 requests in infocube and much more partitions).
    Most importantly, since this partition is observed for this onfocube only and not for other infocubes, it is possible that it can be a reason for SLOW RETRIEVAL of data from this ionfocube( not sure since the partition is used to help in fast retreival of data from the infocubes).
    Kindly help.
    Thanks for your co-operation in advance.
    -Shalabh

  • ITunes producer error ITMS 9000

    I receive this error message but don't know how to decipher it or correct the problem. It seems to refer to a small image that I have long-since deleted. Help?
    ERROR ITMS-9000: "File : /OPS/assets/images/ClickHandler.ashxruhttp3a2f2fus.123rf.com2f400wm2f4002f4002f michaeljung2fmichaeljung08122fmichaeljung0812015652f4038593-african-mechanic-wor king-on-a-vehicle.jpgduwww.123rf.comld201202-filtered.png exceeds the maximum allowable file path length of 180 characters." at Book (MZItmspBookPackage)
    Thanks

    OK, hair-pulling commencement...
    I've now re-entered as non-formatted text (one-entry-at-a-time) every one of the 200+ Glossary entries, and relcated and replaced all illustrations on the Glossary pages. Still, iTP just will not pass this file. Note... the image files noted in this error message are not- repeat not in the book. I can't remove what isn't there. Somebody please help me understand how to correct the glossary "fragments" if they don't appear anywhere. Can you help me parse ths infor to at least see what page these fragments are in? I don't understand the statements, nor do I understand how to make it right.
    paint me frustrated
    Package Summary:
    1 package(s) were not uploaded because they had problems:
              /Users/admin/Music/iTunes Producer/Playlists/9780985204761.itmsp - Error Messages:
                        Apple's web service operation was not successful
                        Unable to authenticate the package: 9780985204761.itmsp
                        ERROR ITMS-9000: "File : /OPS/assets/images/ClickHandler.ashxruhttp3a2f2fus.123rf.com2f400wm2f4002f4002f michaeljung2fmichaeljung08122fmichaeljung0812015652f4038593-african-mechanic-wor king-on-a-vehicle.jpgduwww.123rf.comld201202-filtered.png exceeds the maximum allowable file path length of 180 characters." at Book (MZItmspBookPackage)
                        ERROR ITMS-9000: "Book contains 2 files whose paths exceed the maximum allowable file path length of 180 characters. One example is : /OPS/assets/images/ClickHandler.ashxruhttp3a2f2fus.123rf.com2f400wm2f4002f4002f prolisok2fprolisok08012fprolisok0801000342f2432248-five-old-lamps-of-orange-ligh t-as-part-of-illumination-system-in-historic-cit.png" at Book (MZItmspBookPackage)
                        ERROR ITMS-9000: "OPS/glossary52.xhtml(3): 'g-30FFDF3A-5489-4096-AE30-44B858E8FFCE': fragment identifier is not defined in 'OPS/content11.xhtml'" at Book (MZItmspBookPackage)
                        ERROR ITMS-9000: "OPS/glossary58.xhtml(3): 'g-A7E0C85F-9888-4B33-A1F2-9677E0C258B1': fragment identifier is not defined in 'OPS/content11.xhtml'" at Book (MZItmspBookPackage)
                        ERROR ITMS-9000: "OPS/glossary60.xhtml(3): 'g-6911F820-8D44-4AE3-8E32-54D622A5FDD6': fragment identifier is not defined in 'OPS/content11.xhtml'" at Book (MZItmspBookPackage)
                        ERROR ITMS-9000: "OPS/glossary133.xhtml(3): 'g-C9B75C27-3D1A-47BF-8EE0-839AE714A16D': fragment identifier is not defined in 'OPS/content11.xhtml'" at Book (MZItmspBookPackage)
                        ERROR ITMS-9000: "OPS/glossary137.xhtml(3): 'g-18B3ED3B-3E97-454A-973F-99EAEE654C49': fragment identifier is not defined in 'OPS/content11.xhtml'" at Book (MZItmspBookPackage)
                        ERROR ITMS-9000: "OPS/glossary149.xhtml(3): 'g-2B6203B7-57BA-4237-86C5-C83CF3B49203': fragment identifier is not defined in 'OPS/content11.xhtml'" at Book (MZItmspBookPackage)
                        ERROR ITMS-9000: "OPS/glossary150.xhtml(3): 'g-B38C805C-F6E5-4D0C-849E-BCDAB326C42C': fragment identifier is not defined in 'OPS/content11.xhtml'" at Book (MZItmspBookPackage)
                        ERROR ITMS-9000: "OPS/glossary157.xhtml(3): 'g-F1AF1BFE-1312-40D4-98BD-4444D9212B89': fragment identifier is not defined in 'OPS/content11.xhtml'" at Book (MZItmspBookPackage)
                        ERROR ITMS-9000: "OPS/glossary159.xhtml(3): 'g-7150A6B6-679E-464B-ACFA-1A7D4B2FF56F': fragment identifier is not defined in 'OPS/content11.xhtml'" at Book (MZItmspBookPackage)
                        ERROR ITMS-9000: "OPS/glossary160.xhtml(3): 'g-4DC88BC7-DF4F-4F83-9989-D8BA280B7C12': fragment identifier is not defined in 'OPS/content11.xhtml'" at Book (MZItmspBookPackage)
                        ERROR ITMS-9000: "OPS/glossary161.xhtml(3): 'g-B1047B6F-FEB6-4FD8-BC56-35D364285A92': fragment identifier is not defined in 'OPS/content11.xhtml'" at Book (MZItmspBookPackage)
                        ERROR ITMS-9000: "OPS/glossary162.xhtml(3): 'g-4DE67C60-BB6B-489C-AA07-2C2F731FCEB9': fragment identifier is not defined in 'OPS/content11.xhtml'" at Book (MZItmspBookPackage)
                        ERROR ITMS-9000: "OPS/glossary163.xhtml(3): 'g-D0E799EC-C44D-4B60-AE8A-7931D12842FA': fragment identifier is not defined in 'OPS/content11.xhtml'" at Book (MZItmspBookPackage)
                        ERROR ITMS-9000: "OPS/glossary173.xhtml(3): 'g-332FC92E-8AFD-4086-9050-A896FEEACEDD': fragment identifier is not defined in 'OPS/content11.xhtml'" at Book (MZItmspBookPackage)

Maybe you are looking for