ITunes Radio not working properly after signing up for iTunes Match

I've been a user of iTunes Radio for some time now, and I've enjoyed it with minimal technical issues - until I signed up for iTunes Match. I'm not sure if it's simply coincidence, or if my subscription is causing issues.
The problem is that when I click on a station, whether it be a Featured Station or one of My Stations, it acts like it will play, but the time bar never comes up below the song title. Instead of showing the status bar when a song is playing, indicating the time lapsed/remaining, it shows a solid blue bar all the way across with no time.
I use Radio on my MacBook Pro (2009) and I also AirPlay my music to two Bose SoundTouch 20 speaker systems. I'm on the latest version of iTunes, my Bose systems are updated with the latest software, and I've never had an issue with this before. I can play songs I own or ones that I want to preview in the iTunes Store just fine through all of my speaker systems. What's interesting is that my NPR station in Radio works fine, though that one doesn't allow for AirPlay.
I'm also having identical issues from my iPhone 5s. Though I can only play to one AirPlay device at a time from my iPhone, the symptoms are otherwise the same. Downloaded songs play fine; iTunes Radio freaks out and gives the "Station Temporarily Unavailable" message. Except it's not temporary, unless you consider two months of this irritation temporary...
Here's what I've tried so far:
Logging out of iTunes, restarting and logging back in.
Resetting my Bose AirPlay speakers.
Turning off the Bose SoundTouch App and Music Server App on my computer.
Disconnecting my Bose AirPlay speakers from power altogether.
Restarting computer and resetting iTunes Cache and Warnings.
None of those attempts at fixing this issue has resolved anything. I'm at a bit of a loss for help here, and I really don't want to start uninstalling and reinstalling programs if it can be avoided. If there's a way to unsubscribe from iTunes Match, I'd want to try that first as that seemed to be when things started becoming non-responsive. If Apple provides a way to fix iTunes or the iTunes Match service without charging me a $29 support fee, I think that would be great, but I haven't seen one.
Anyone encounter this before? Anyone at Apple listening? I'd greatly appreciate any help.

Try it in Cellular as a quick test. Mi had lots of troubles and isolated the issue to Cox communications. May be an ISP issue.

Similar Messages

  • ITunes / iPhone not working properly after newest update...

    iTunes is not working properly after the newest update...  It dosen't see my iPhone, the program acts very sluggish, and has trouble loading the Store.  Anyone have a solution or an explanation?  I have tried the suggestions found in other threads ie. restart, re-download, charge phone, restart phone and so on. Nothing works.  Everything was working fine until iTunes and the new ios were installed.  After that it all went to crap.  Thanks, Randy...

    Close your iTunes,
    Go to command Prompt -
    (Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
    (Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
    In the "Command Prompt" screen, type in
    netsh winsock reset
    Hit "ENTER" key
    Restart your computer.
    If you do get a prompt after restart windows to remap LSP, just click NO.
    Now launch your iTunes and see if it is working now.
    If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
    iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
    http://support.apple.com/kb/TS4123?viewlocale=en_US

  • Itunes store not working properly after update 10.7

    I just did the latest itunes update to 10.7 and initially itunes store seemed fine, I was browsing films and was able to view a trailer, but the screen changed and there were suddenly no images of fims or ability to view trailers and nothing happens when I click 'rent film'. I restarted both itunes and computer but it's still the same. The main itunes store screen is completely blank now, if I scoll right to the bottom I can click on 'films' then screen is black apart from right hand menu. And still not functioning. Would really welcome some help please! Thanks.

    Hi justineflow, is your problem similar to this - https://discussions.apple.com/thread/4318276?tstart=0
    It seems maybe iTunes is being updated or there is an issue with 10.7 for some people not using Lion or Mountain Lion..? Wondered if it was a Snow Leopard thing but you're using 10.3.9 so that's not the issue. Wondering if it's just a UK thing...

  • Does anyone have a problem where they try to download a movoie trailer the day it comes out and then it says iTunes is not working properly and shuts down iTunes?

    Does anyone else have a problem in iTunes where they download a movie trailer and then they get a message saying iTunes is not working properly and it shuts off iTunes?

    Hello Suzanne,
    Thank you for providing the details of iTunes unexpectedly quitting.  You have taken some really good troubleshooting steps already.  I found an article with additional steps you can take to further isolate and troubleshoot an issue like the one you described:
    iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
    http://support.apple.com/kb/ts1717
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Since I installed the new OS X Lion, the iCal syncing through iTunes is not working properly.

    Since I installed the new OS X Lion, the iCal syncing through iTunes is not working properly.
    When I sync my MacBook Pro with my iPhone and iPad, the events set in both devices (iPhone & iPad) are not transfered to the iCal on my labtop. Events created in both devices are transfered and copied betwen them when I sync them with the iTunes app (through the MacBook Pro) but they are not trasfered/copied into the labtop (iCal). The events created in the iCal (on my MacBook) are tranfered to the devices as two events on same hour. One, with the description created on the iCal, and the other as a New Event (no description). This is happening since I installed the new OS X Lion last week.
    I file a report and talked with an Apple Support Representative, but they could not help me. They have not receive any other reports on this matter. Do someone has confronted this issue. I need to find out how to solve this problem.
    Regards,
    JAD

    Hi Sydness,
    Thank you very much for your help. It just worked fine. I have 4 macs in my company for 25 years (one is updated each year), and it is the first time I could not solve a problem for weeks. It gave me the opportunity to join this great community.
    Charles
    Sydness wrote:
    I reset my SyncServices and the calendar sync worked perfectly after that.
    I followed the instructions found here:
    http://support.apple.com/kb/TS1627?viewlocale=en_US
    Mac OS 10.7.1 - MacBook

  • I have upgraded My leopard to Mountain lion 10.7 via snow leapeard. Now My itunes is not working properly nor I able to install google chrome successfully. Please help me in this occasion. I am facing following messages.

    Hello Team,
    I have upgraded My leopard to Mountain lion 10.7 via snow leapeard. Now My itunes is not working properly nor I able to install google chrome successfully. Please help me in this occasion.
    Also, I am not being able to upgrade Mac OS X 10.7 to 10.7.4 or letest for lion.
    I am facing following messages when I open itunes ( I down loaded and install new for 10.7)
    Process:         iTunes [463]
    Path:            /Applications/iTunes.app/Contents/MacOS/iTunes
    Identifier:      com.apple.iTunes
    Version:         10.7 (10.7)
    Build Info:      iTunes-10702101~1
    Code Type:       X86-64 (Native)
    Parent Process:  launchd [273]
    Date/Time:       2012-10-22 23:33:07.226 +0200
    OS Version:      Mac OS X 10.7 (11A390)
    Report Version:  8
    Interval Since Last Report:          4918 sec
    Crashes Since Last Report:           2
    Per-App Crashes Since Last Report:   2
    Anonymous UUID:                      3DE933E2-7A48-4840-91F4-7DC466ED9C26
    Crashed Thread:  0
    Exception Type:  EXC_BREAKPOINT (SIGTRAP)
    Exception Codes: 0x0000000000000002, 0x0000000000000000
    Application Specific Information:
    dyld: launch, loading dependent libraries
    @executable_path/../Frameworks/iPodUpdater.framework/Versions/A/iPodUpdater
    Dyld Error Message:
      Library not loaded: @executable_path/../Frameworks/iPodUpdater.framework/Versions/A/iPodUpdater
      Referenced from: /Applications/iTunes.app/Contents/MacOS/iTunes
      Reason: unsafe use of @executable_path in /Applications/iTunes.app/Contents/MacOS/iTunes with restricted binary
    Binary Images:
           0x102a96000 -        0x103c36fff  com.apple.iTunes (10.7 - 10.7) <0CC47E12-134F-A9E1-7E4F-3EAC797C3050> /Applications/iTunes.app/Contents/MacOS/iTunes
        0x7fff62696000 -     0x7fff626cb1ff  dyld (195 - ???) <71093406-21CF-3DBE-A001-802259ED5300> /usr/lib/dyld
    Model: MacBook4,1, BootROM MB41.00C1.B00, 2 processors, Intel Core 2 Duo, 2.4 GHz, 2 GB, SMC 1.31f1
    Graphics: Intel GMA X3100, GMA X3100, Built-In, 144 MB
    Memory Module: BANK 0/DIMM0, 1 GB, DDR2 SDRAM, 667 MHz, 0xAD00000000000000, 0x48594D503131325336344350362D59352020
    Memory Module: BANK 1/DIMM1, 1 GB, DDR2 SDRAM, 667 MHz, 0xAD00000000000000, 0x48594D503131325336344350362D59352020
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x88), Broadcom BCM43xx 1.0 (5.10.131.36.5)
    Bluetooth: Version 2.5.0b13, 2 service, 12 devices, 2 incoming serial ports
    Network Service: AirPort, AirPort, en1
    Serial ATA Device: FUJITSU MHY2160BH, 160.04 GB
    Parallel ATA Device: MATSHITADVD-R   UJ-867
    USB Device: Built-in iSight, apple_vendor_id, 0x8501, 0xfd400000 / 2
    USB Device: USB Receiver, 0x046d  (Logitech Inc.), 0xc52f, 0x1d100000 / 2
    USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8205, 0x1a100000 / 2
    USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x022a, 0x5d200000 / 3
    USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x5d100000 / 2
    And Google chrome just keep loading the page for hours and nothing is appear on its browser. But safari and firefox working absolutly fine.
    In addition, I have reboot computer as well but it never worked. Please help me in this occasion.
    Eagerly waiting for your response on this issue.
    Best Regards,

    You need to upgrade your copy of MS Office. You're using a version that is 8 years old (at least). You can buy Office 2011, which will work. You could also get a copy of Pages from the App Store, which is cheaper and will open Word files (though not perfectly). Or you could get a free Office clone, like OpenOffice or LibreOffice.

  • Aluminum Wireless Keyboard not working properly after Firmware update 1.1

    Hi,
    Well, as the subject says, my keyboard is not working properly after I updated the firmware. The problem is that several keys (delete, down arrow, brackets and apostrophe) stopped working right after I installed the update. I never dropped it or hit it. And I did not stop or interrupt or did anything during the install. I take very good care of it.
    I have already tried toubleshooting with the support page, restarting the iMac, taking off the batteries, setting it up with bluetooth again, going back a week with time machine and to reinstall the firmware. So, if you have something new for me to try, I will really apreciate it.
    Thanks in advance.
    Franco.

    I have 24" iMac with the Apple wireless M&KB - I know this is basic but have you tried a fresh set of batteries? My KB will refuse to establish connection when batteries are on the weak side the firmware update may just be a co incidents. If your wireless mouse is working OK then I would guess the blue tooth is functioning.
    Not sure about the 10.49 download - are your other file downloads completing properly? Are there any error messages?
    Steve

  • My Iphoto does not work properly, after downloading Mavericks.  How can I fix it ?  loading Mavericks

    My Iphoto does not work properly after downloading Maverick. How can I fix it ?

    With the amount of information you've provided it's impossible to offer a potential solution.  We can't see your computer so we need to know the details of your problem and setup, i.e.:
    what version of iPhoto are you using?
    what system version are you running?
    what do you mean by not working properly? Explain in detail.
    what fixes have you tried?
    where is your library located?
    did you apply any updates or upgrades just prior to the problem occurring?
    are you running a "managed" or "referenced" library?
    what type of Mac?
    how much free space on your boot drive?
    OT

  • Camera not working properly after ios7 upgrade in iphone 4s

    Iphone 4S
    Camera not working properly after iOS7 upgrade.
    It defaultly takes other effects that is chrome in filter section, once we wdit in phone it can brought to normal (without filter)
    help me to solve this problem

    Have you tried a battery pull?  If the issue is still there, you can either take it to the store or downgrade your software to the previous version to troubleshoot.
    Please click the Thumbs Up icon if this comment has helped you!
    If your issue is resolved, please click the solution button on the resolution!
    Every BlackBerry should have BlackBerry Protect, get it now! | Follow me on Twitter | Bring Back BBM Music!

  • Asha 501 : Whatsapp not working properly after 14....

    Hi,
    whatsapp is not working properly after software update, some times contacts never sync. screen goes pale and chat window doesn't show properly.
    Looks like memory problem after the new  updates or anything else?

    Similar complains around the web. I'd recommend getting the phone flashed at a care point to see if that improves the situation.
    Do wait for a couple of weeks for the full firmware files to be available at the respective care centers. AFAIK, they are not yet available in India.

  • If my itunes is not working properly is it safe to uninstall it & then reinstall it without losing my music?

    If my itunes is not working properly is it safe to uninstall it & then reinstall it without losing my music?

    Under normal circumstances, an uninstall/reinstall doesn't touch your content. (That being said, it's still always a good idea to maintain a current backup at all times in case of disasters of any sort.)

  • Camera led is not working properly after update

    After updating to IOS 6.0.1 led is not working properly.
    When filming , the led is burning very weak, and when lightsetting is turned to
    automatic not at all.

    Reset your phone first, hold the home and off button down until the apple symbol comes up. If that doesnt do it, then do a restore from your backup in itunes.

  • 5c itunes radio not working

    5C itunes radio wont work. Cant even create stations. Keeps saying "unable to create station at this time".

    i would sign out iTunes in settings, perform a hard reset (holding down both lock button & home button for 9 seconds), or even resetting network settings. One of these 3 should work, if not all.

  • Smart Actions not working properly after software update

    My Razr updated 2 days ago and since then my Smart Actions are not working properly. 
    I have my Work action set to turn the volume down when I'm at a certain GPS.  It shows that "Work" is active, but doesn't turn the volume down.
    Also, there are times (since I've owned the phone) that it will not connect to the network after coming off a Wifi Connection without rebooting the phone.  I took it into a Verizon store and they did a hard reset, and that fixed it for a time, but it started doing it again. 
    Any help appreciated.

        Hi mcclainkb, Let's make sure your phone works as you expect it to! Have you tried removing the Smart Action and setting it back up again?  Are your other GPS services working as normal?  After the hard reset performed in the store did you install all of the same application that you had before?
    Thank you,
    YaleK_VZW
    Follow us on Twitter @VZWsupport

  • Ipad2, safari does not work properly after ios6 update. How do I fix it?

    I need help in fixing safari problems after ios6

    With the amount of information you've provided it's impossible to offer a potential solution.  We can't see your computer so we need to know the details of your problem and setup, i.e.:
    what version of iPhoto are you using?
    what system version are you running?
    what do you mean by not working properly? Explain in detail.
    what fixes have you tried?
    where is your library located?
    did you apply any updates or upgrades just prior to the problem occurring?
    are you running a "managed" or "referenced" library?
    what type of Mac?
    how much free space on your boot drive?
    OT

Maybe you are looking for

  • If I am trying apply for a job on my iPad, how can I upload a resume onto the site?

    I need to upload a resume form my iPad to the website, but every time I hit the choose file button provided on the site, what pops up is, Take picture or video, or Choose Selected. Why won't this operation work on my iPad. P.S: I don't know why it sa

  • Xmii and Dates

    Hi I have an issue where I believ there is a disconnect between my dates and the xmii server. I am running the followign query against a UDS source Select      time as OutputDate, value as OutputValue From      picomp Where      tag = '50210-LI-QVY-2

  • Saving as .gif with transparency

    I have a .png file with a transparent background which I have been trying to export as a .gif with transparency in FW8. I've managed to save it as a .gif but the edges are dreadfully ragged. I seem to have tried all the options. Any ideas please?

  • How to install SQL Server 2014 Documentation

    I installed the SQL Server 2014 Management Studio (64bit of course), that came with an empty product help. So I went to http://www.microsoft.com/en-us/download/details.aspx?id=42557 and downloaded the file from there. Upon opening the file I got an e

  • Set audio input level manually on t5i

    First post here. I've just started workig with my new t5i, which I'm using to work on my ongoing video tutorial series. In the manual I see how it is possible to set the audio input level maually for an external mic but I can't figure out how to navi