ITunes recognizes iPod, Desktop does not, Finder does not

My iPod does not show up on the desktop. In Finder, I have no iPod showing. I went through the Five Rs, looked at the Apple troubleshooting sheet, changed USB ports, nada. Plays fine out of the dock, in my truck, etc. I am a newbie to all things Apple from the computer side, so bear with me id I left anything out.
Thanks.

Unless you "Enable Disk Mode" or use Manual updating, the iPod won't show up in the Finder on the desk top. Only in iTunes.
Patrick

Similar Messages

  • ITunes recognizes my device but the device does not show up for me to work with.  Any idea where I go to access to device in iTunes.  Going to File/Device is greyed out.

    iTunes recognizes my device but the device does not show up for me to work with.  Any idea where I go to access to device in iTunes.  Going to File/Device is greyed out.

    I think this article will help you.

  • I have 2008 aluminum macbook with OS X Lion. It does not recognize my canon sd1000. Finder does not show the camera.

    My macbook does not recognize Canon SD1000. Camera goes to transfer mode and it looks like the problem is the computer. Finder do not show the camera at all. (I am not using any programs, iphoto etc...).

    Instead GarageBand recognize my keyboard and i can play normally, also, if it can help, those are the Audio and Midi Logic Preferences and the Controller Surfaces Setup with the keyboard connected :

  • ITunes recognizes other mass storage devices/network but not iPod

    When I plug my iPod into the computer, Windows and iTunes recognize that the iPod is connected. A windows bubble from the sys tray tells me that a mass storage device was detected, and a iPod icon appears in iTunes. However, iTunes does not connect to the iPod; for some reason it connects itself to the network (ethernet connection) or to my external hard drive (USB connection), in that order. It will recognize the network as the iPod, unless it is disconnected, and then it will recognize the hard drive as the iPod. If neither of these devices are connected, then the computer doesn't recognize the iPod at all unless I restart it. Thus, to get the computer to recognize my iPod, I have to disconnect my network, and my external hard drive, restart the computer and plug in the iPod. After this point, I can reconnect both devices and everything works. What's going on?

    hi ephmike!
    that sounds like classic symptoms of a Windows drive letter confusion problem. let's see if this document will help:
    http://docs.info.apple.com/article.html?artnum=93499
    keep us posted.
    love, b

  • New MPB - iPod shows up in Finder but not in iTunes. Help please!

    I just completed a 95% successfull migration from my old MPB to my new MPB. iTunes seems to work fine, sees all my music and I have authorized the new mac to play the music.
    However, when I connect either of my two ipods I get the same result - it does not show up in iTunes but immediately shows up in Finder. Given the same thing happens with both ipods I suspect there is some silly little setting I have to go through. Can anybody help please?
    The MBP is a brand new 13" with the smaller processor. The iPods are a 2nd generation 40Gb and the 120Gb Classic.

    So I ended up reinstalling iTunes. That almost solved it, but when I also restored the iPods it seems to be OK.
    Must say I'm disappointed that a brand new Mac behaves this way (and ironically it did not even have the latest software installed...).

  • I have ipod classic (about 3 yrs old) and when recharging, everything on it is gone.  When I tried copying the saved/backup items, itunes and ipod were stuck...doing nothing/frozen.  Help!

    I have an ipod classic which I had bought about 3 years ago.  I plugged it into my computer this past weekend to charge and it showed me that there were nothing on it...no music, no movies, no photos, nada.  I had updated the program on my computer and when I tried to reload all the stuff that I had saved, it locks up my itunes and ipod.  It doesn't do anything!  I don't know what is going on....Help!?  Anyone!?  Any clues? 

    Which version of iTunes are you using? (most probably the latest, a lot of this hung iTunes coming in)
    Which iPod software is shown on the iTunes summary screen?
    My suggestion go on Diskmode.
    http://support.apple.com/kb/HT1363?viewlocale=en_US
    Connect it to iTunes via a USB2.0 port (For Mac please dont use the Keyboard USB port and for MB, only one USB port is for iPod, the other will freeze your iTunes as the resource bus is shared with other devices )
    Then update the iPod software or Restore the iPod.
    Try to disconnect your iPod from the PC, if you are not charging or Syncing the iPod, or else, some Apps will just trigger a Restore and delete you iPod.
    For Mac users, who has a FAT32 iPod, you may find iTunes Restoring it to HPS+ if you leave it connected overnight.
    For Windows users, some Winsock layer conflict with iTunes will trigger the Restore.
    Good Luck!

  • ITunes recognizes iPod but can't sync - driver missing?

    Here's the rundown. Several months ago, the complete content of the old XP machine where this iPod's library resided was migrated to a Windows 7 Home Premium system using LapLink PC Mover.  iTunes had never previously been installed on the Windows 7 unit.  iTunes appeared to be functional afterwards, but on the first and all subsequent instances of attempting to sync the iPod, clicking on the Sync button did and still does nothing.  I have tried connecting the iPod to multiple different motherboard-based and pcie-based USB ports, and to a USB2.0 external hub. (Sometimes the screen briefly flashes as though it was switching to the sync process monitor, but usually it's just no change.)  I've tried uninstalling all of the Apple software from the machine, rebooting, and reinstalling.  (When I say "all", that includes iTunes itself, Bonjour, Apple Software Update, Apple Mobile Device Support, and Apple Software Update, in that order.  Trying any other order produced complaints.  Quicktime is not installed on this machine; iTunes and the iPod are not used for video.)  In looking at the postings of others who have had similar issues, I found a recommendation to reinstall another driver that I have verified is not loading and is not running with the iPod hooked up:  Apple Mobile Device USB Driver.  I have tried to reinstall this driver, but it hasn't worked.  What I have come to suspect is that something in the Windows registry got borked during the transfer, and is causing the load process for the *needed* driver to fail, possibly by trying to load the old XP version.  But my registry-fu is not strong in this, so I'm looking to see if anyone else has run across this issue previously and found a solution.
    Points to note:
    Windows 7, installation was a port from XP via LapLink PCMover
    5th gen classic iPod 80Gb with 34Gb free
    iTunes version 11.4.0.18 is installed  (This was the current version when I started trying to find the problem.)
    Apple Mobile Device Support software is loaded.
    Apple Mobile Device USB Driver is NOT loading, either before or while the iPod is connected.
    In Device Manager, the iPod appears as a Disk Drive and as a Portable Device when connected, but does not appear in the Universal Serial Bus Controllers list.
    iTunes recognizes the iPod and can access it sufficiently to verify that it does not need to be updated.
    iTunes can eject the iPod.
    iTunes cannot sync the iPod.

    I can now expand the information somewhat.  On my second, very similar setup (5th gen Classic connected to Win 7/32 with iTunes 11.4.0.18) I was able to successfully do the initial sync of the iPod several weeks ago, but this afternoon, when I tried to sync it to include the music I had added recently, it failed in the same manner as the other system.  I really, really, really DO NOT want to downgrade to iTunes 12 with it's horrible antinavigation interface and lack of the very useful and needed Sidebar, but it is beginning to look like 11.4.0.18 is problematic, and I don't have an installer for anything else at present.

  • IPod Classic, can´t find the Notes folder on Finder in my Macbook

    Hello friends!
    I want to use my iPod as an external hard drive, I have the latest update, 1.3. The problem that I have is that I am not getting the Notes folder in my finder, can not even find my ipod on devices, I have a MacBook.
    Can anybody help me?
    Best regards,
    Opalencia

    Hello opalencia,
    So you are saying your iPod is not recognized by your Mac or iTunes? If that's the case, have you had a chance to check out this Apple support document related to this document?
    [iPod not recognized in iTunes and Mac desktop|http://support.apple.com/kb/TS1410]
    If you are able to get iTunes to recognize the iPod, make sure "disk use" is enabled under the iPod's Summary tab. Once you have done that, you should be able to open up the iPod in Finder and navigate to the notes folder.
    [Storing and reading notes with your iPod|http://support.apple.com/kb/HT2234]
    Hope it helps.
    B-rock

  • Neither pc nor itunes recognizes ipod

    so this thing worked for me a week back, i set it on manual because this nano cant hold my entire library. i loaded a 500 song playlist onto it and iv been listening to those for a week,,,,those 500 got old and when i went to sync different songs on it this happens.....
    i connect the ipod to the usb cord,,,fine fine,,,windows makes a beep noise like it knows that i connected something...except the beep noise is a double instead of the classic single "dong" sound. the ipod does not make any change,,,like the "do not disconnect" message does not show up, just the regular menu.
    the ipod doesnt show up in my windows explorer under my computer,,,nor does it show up in itunes.
    iv tried all the classic ipod fixes,,,the 5 Rs,,,i didnt reinstall itunes but, itunes recognizes my other ipods. i cant restore the nano because it wont hok up to computer,,,, please any help is welcome and thank you

    Start with these articles and see if that gets you anywhere...
    iPod is not recognized properly by computer when USB drivers are not installed properly or are out of date
    http://docs.info.apple.com/article.html?artnum=305136
    iTunes for Windows: iTunes 7 doesn't recognize iPod
    http://docs.info.apple.com/article.html?artnum=304434
    iPod missing in "My Computer" or in iTunes for Windows
    http://docs.info.apple.com/article.html?artnum=61711
    Also you might try forcing the iPod into disk mode first, then connecting it to your computer and see if that makes it show up in iTunes...
    Putting iPod into Disk Mode
    http://docs.info.apple.com/article.html?artnum=93651
    Windows confuses iPod with network drive or hard drive and may keep iPod from mounting or songs may seem to disappear
    http://support.apple.com/kb/TS1493
    Cheers,
    Patrick

  • How come when i connect my nano to my computer it says in itunes "an ipod has been detected but could not be itentified properly"?

    whenever i connect my ipod nano to my computer, itunes gives me a pop-up that says, "an ipod has been detected, but it could not be identified properly. Please disconnect then reconnect the ipod, then try again." when i do that, i get the same pop-up. beneath the pop-up stated before it also says "If the problem persists, uninstall Itunes, then install Itunes again." but after doing that, it still will not read my ipod and scan it in.

    Does the Apple ID on the iPod match the Apple ID on iTunes?

  • ITunes recognizes iPod -- then it vanishes

    Hi folks -
    My color iPod has been engaging in some idiosyncratic behavior and I cannot get it to update. The long story is this: When I went to get the new updater (1/10/06) and tried to update, I got a bad folder icon on the iPod screen -- the fonts got smaller too -- and ended up doing a full restore. The updater claims the restore was successful and that I am running the latest iPod software - 1.2.1. (I am running iTunes 6.0.2.23.)
    When I plug iPod into my USB 2.0 port, it starts iTunes and looks like it's going to update. But after about 8 songs (keep in mind all of my music got wiped out when I restored) the iPod vanishes from the list on the left column of iTunes. After a few minutes, it reappears and tries again. And vanishes again. Etc. If I quit iTunes, the iPod makes it reopen and the process begins again.
    When I plug the iPod into the USB 1.0 port, it appears to update fine -- but at a glacial pace. So far it has not vanished, but it's only on song 10 of more than 5,000.
    Any advice?
    thanks much,
    Adam

    hi Adam!
    gaah. okay, given that you've got a Toshiba, we'd better check up on this issue first:
    iPod not recognized correctly on Toshiba laptop
    keep us posted.
    love, b

  • Computer nor Itunes recognizes Ipod

    While my Ipod was updating the usb was pulled out of the computer. My computer nor Itunes recognizes the Ipod Video (30gb) and my Ipod won't turn on either even when the hold button is off. If anyone knows how to deal with this thing. Please help (I have to go on a trip for Christmas Vacation).

    Have you had a chance to look at these troubleshooting pages? They may be of some help:
    iPod missing in My Computer and in iTunes
    iPod is not recognized properly by computer when USB drivers are not installed properly or are out of date

  • HT1386 can not sync my ipod to itunes.   itunes recognises my device and i was able to transfer books from my ipod to itunes but it will not transfer from itunes to ipod.  the sync option is not hilighted..What do i do now?

    My ipod will not sync fom library to ipod.  The sync option is not hilighted.  What do I do now?

    Was the iPod previous synced to another iTunes library/computer?
    Have you successfully synced from this iTunes library/computer before?
    Do the songs play in iTunes?
    Do you have the right boxes checked to sync?
    iTunes: Syncing media content to iOS devices and iPod        
    Do you have any Restrictions (Settings>General>Restrictions) set that would prevent syncing those songs?

  • TS1369 Itunes recognizes ipod but 'on this ipod' tab doesn't show up.

    So iTunes recognizes my iPod but the 'on this iPod' tab isn't showing up. I've restarted the computer, iPod (ipod is also updated), and iTunes but nothing seems to help. This is on a Mac book pro; iTunes version is 11.0.2 (most recent). Any ideas anyone?

    You have to enter the album information manually in iTunes to get it to show up in your iPod. The only way album info shows up automatically is if you purchase the album from the iTunes store.
    Click on the song in iTunes so it's highlighted in blue and hold down the Command - i keys on your Mac keyboard. This will bring up a dialogue box with tabs for Summary, Info, Video, Sorting, Options, Lyrics, and Artwork. Click on the Info tab and you'll see a group of input fields for song title, artist name, album name, etc.  After you fill in the info click OK.  (You can only enter info for one song at a time).The updated info should now show up in iTunes. Good luck!

  • ITunes 9 does not recognize iPod Touch (1st Gen); Vista does -- as a ...

    ...Still Digital Camera, complete with a DCIM folder.
    Upon USB hookup, Vista popups up a new window with the directory My Computer\Apple iPod\ , with the sub-directories of Internal Storage\DCIM. Free space and Used space are both 0 bytes.
    Additionally, the attempt to reset the iPod failed, as Vista claims that recovery mode for the iPod is not supported.

    It says 9.1.1(11) -- and the update check says it's there are no updates for me.
    Looking through the drivers that are associated with the iPod, I get:
    \system32\drivers\WpdMtpDr.dll
    \system32\drivers\WpdUSB.dll
    \system32\drivers\WUDFRd.sys
    \system32\WpdConns.dll
    \system32\WpdMtp.dll
    \system32\WpdMtpUS.dll
    No USBaApl.sys at all.
    An attempt to auto-update the driver and by manually pointing to the \system32\drivers\ directory yields:
    Best driver already installed -- Digital Still Camera
    Without an .inf file to easily associate to the iPod, it's hard to choose which of the device drivers to force the usbaaple.sys to the iPod -- I can't choose .sys files, only .infs.
    Of the device types:
    (Standard MTP-Compliant Device)
    --Kodak DC4800 Zoom Digital Camera
    --Kodak DC4800 Zoom Digital Camera
    --Kodak Digital Camera
    --Kodak Digital Camera
    --MTP Device Version: 6.0.6000.16386 [6/21/2006]
    --MTP Device Version: 6.0.6000.18000 [6/21/2006]
    (Standard MTP-compliant devices)
    --Digital Still Camera *What Vista thinks the iPod is
    --Digital Still Camera
    --MTP Device
    --MTP Device
    --MTP IP Device
    --MTP IP Device
    (Standard Windows Mobile device)
    --Windows Mobile device
    (WPD file system device)
    --Microsoft WPD FileSystem Volume Driver
    Outside of the Kodak drivers, I've no idea which one would be best suited for the iPod, and I suspect none of them will work. I should note, the iTunes did recognize the iPod at some point. Thankfully, I only sync'ed to the iPod instead of maintaining a portion of my library on the iPod Touch (I lost some tracks on an iPod Mini when slipped off the jack and hit the ground, crashing the hard drive); I don't have any photos or videos on it.

Maybe you are looking for

  • Mini-HDMI Port: Video OK, sound only works for iTunes

    Let me start by saying, I'm pretty new to Mac so please be gentle with your answers... I just got a new HD Samsung TV and have connected it to my Macbook Pro through the Mini-HDMI port. There are two HDMI inputs on my TV, DVI and ARC. I'm using DVI.

  • How can I delete photos from my phone

    how can I delete photos from my i phone after synching w/ my macbook (i photo)?

  • RMAN script not working

    Posting this: #!/bin/sh ORACLE_SID=DB_NAME ORACLE_HOME=/u01/app/oracle/product/ORA9208EE export ORACLE_SID ORACLE_HOME cd $ORACLE_HOME/bin ./rman <<EOF! connect target / run { change archivelog all crosscheck; backup database plus archivelog; exit; s

  • FNDLOAD For Concurrent Program

    Hi All , I'm moving objects from Dev instance to UAT i needed to use FNDLOAD to do that i am using the following commands to download it from dev & upload it to UAT FNDLOAD apps/apps O Y DOWNLOAD $FND_TOP/patch/115/import/afcpprog.lct GPSSA_FA_DEPRN_

  • Change Material Number using BAPI_PO_CHANGE, PO OrderUnit reset to base UoM

    Hi Experts, I am using IDOCs and BAPI_PO_CHANGE to update PO's in SAP (as PO's are created/maintained in an external system and interfaced to SAP). This works fine except for a change in the material number, the PO Order Unit is getting reset to the