Itunes stops working after update windows 7

I am using Windows 7 64 bit and recently updated to itunes 12. After a few minutes itunes crashed with the "has stopped working" message. I have reinstalled, created a different user account and got rid of all other Apple programs all to no avail. I even reinstalled itunes 11 but it would not recognise my library. This is driving me mad. Seems I'm not the only one. suggestions please!!

I'm going to ask the hosts to move this to the windows part of the iTunes part of this forum. YOu'll stand a better chance to get an answer there than you will here.

Similar Messages

  • ITunes stopped working after september windows update

    I have just updated windows 8.1 (latest september updated released on 9/9/14) and the iTunes stopped working and crashed. I think its a problem of autorizathion: Immediately trying to deauthorize and reauthorize itunes works. Fix this bug in the next release please!

    AVG was the issue...EOS started right up as soon as I uninstalled AVG! Thanks!

  • Itunes stops working after update install

    Anyone have the issue where itunes stops working post the latest update install? Ive even uninstalled itunes and attempted to reinstall and it doesnt work

    Hey Rockettman23,
    Thanks for the question. I understand that you are experiencing issues with iTunes for Windows. I also understand that you have already attempted to reinstall iTunes. You can use the steps in this resource to further isolate the issue to user-specific or system-wide:
    iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
    http://support.apple.com/kb/TS1717
    Thanks,
    Matt M.

  • Many Adobe CC programs stopped working after updating Windows 8 to Windows 8.1

    I've just updated my Dell XPS1 27 from windows 8 to 8.1, every thing looked ok until I tried to run Bridge CC and a I get the "... stopped working" error. Checking some  other programs like Indesign and Illustrator I'm finding that they open but stop responding after a short time. I'm going to try uninstalling and reinstalling to see if that solves the problem. A cautionary note to anyone contemplating the update. Anyone else experienced this?

    Moral to the story is don't use preview software on a production machine.
    I would prefer to use the cleaner tool after uninstalling trial versions, gives you the options to check new releases before buying
    But then again, when you depend on a production machine it is indeed wise to act carefully...

  • My iTunes stopped working after updating to iOS 7

    I am using an iPhone 4S and after updating to iOS 7, I couldn't open my iTunes app and could not update/download anything in my App Store anymore. I tried logging my Apple ID in and out, but once I've signed out, I couldn't sign back in. Now I can't activate my iMessage anymore. How can I fix this?
    I've tried restarting my phone countless times, but nothing works. There is nothing wrong with my wifi connection either.
    Thanks.

    Hi, carmsdomingo.
    Thank you for visiting Apple Support Communities.
    The steps in the section labeled Unable to activate FaceTime or iMessage with phone number and Apple ID after waiting 24 hours (iPhone only) of the article below, should help resolve the issue.  Make sure to create a current backup prior to processing these steps.
    iOS: Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/ts4268
    Cheers,
    Jason H

  • ITunes stopped working after update.

    iI have been using iTunes on my pc for a while. I opened it earlier and it wanted to download and update. Now I can't get it to work at all. I have uninstalled and reinstalled several times. Any suggestions?

    Are you seeing any error messages?
    One of thesse articles might help ya out -
    iTunes for Windows XP: Troubleshooting unexpected quits, freezes, or launch issues
    iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues
    Does iTunes start normally in Safe Mode? Does it start in another user account?

  • My itunes stops working after I try to sync it, I recently just updated my itunes to 10.4 and my ipod touch 4g to 4.3.4

    My itunes stops working after I try to sync it, I recently just updated my itunes to 10.4 and my ipod touch 4g to 4.3.4

    iPhone 4, same thing. It gets stuck at Step 1: backing up

  • Itunes stops working after say half hour of use and will not play next song, the only way to get it working again is to close and reopen, then it works fine till next time, but the problem keeps returning

    itunes stops working after say half hour of use and will not play next song, I have to close and reopen, it works fine till next time, it keeps happening on a regular basis, HP pavilion laptop, g6 series,
    Window 7 64 bit

    Hello davewood26,
    The following article provides steps that can help get iTunes stabilized.
    iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
    http://support.apple.com/kb/TS1717
    Cheers,
    Allen

  • Wifi iPad 3 charger stopped working after updating to iOS 6, help!

    Wifi iPad 3 charger stopped working after updating to iOS 6.  The little iPhone charger charges it very very slowly, but the charger gets really hot after a while.  I restored it and everything works but the charger.  It's only a few months old, should I try a new iPad wall charger block?

    Hi,
    I did this after reading the forums and it made no difference. it has actually charged from 14% to 67% but thats taken over 12 hours.
    Will monitor it and if no joy will go to a apple store
    Thanks

  • My itunes wont work after update

    my itunes wont work after update. whats the problem.

    also, the curser just goes round and round. cant close by clicking x, have to close frome the place that says close. then message says program not responding.

  • ITunes stopped working on my Windows XP recently, is it that iTunes doesn't support XP anymore ?

    iTunes stopped working on my Windows XP recently,the question, is Itunes no longer supporting Windows XP ?

    Hey there -Poppy-!
    Here is a link that can address your question:
    Apple - iTunes - Download iTunes Now
    http://www.apple.com/itunes/download/
    Windows System Requirements
    PC with a 1GHz Intel or AMD processor and 512MB of RAM
    Windows XP Service Pack 2 or later, 32-bit editions of Windows Vista, Windows 7, or Windows 8
    64-bit editions of Windows Vista, Windows 7, or Windows 8 require the iTunes 64-bit installer
    400MB of available disk space
    Broadband Internet connection to use the iTunes Store
    And here is a link that can help you troubleshoot your issue:
    iTunes for Windows XP: Troubleshooting unexpected quits, freezes, or launch issues
    http://support.apple.com/kb/ts1421
    Thanks for using the Apple Support Communities. Have a good one!
    -Braden

  • Itunes stopped working on my windows 7 laptop

    my itunes stopped working on the windows 7 PC. i am now unable to sync my ipad!

    Hello,
    I suggest that you follow the instructions in this Apple troubleshooting article.

  • Earpiece stopped working after updating to 5.0.1.

    It worked fine the night before.  Then it stopped working after updating to 5.0.1.  I can only hear calls on speaker.  Did anyone else have this problem.  I have tried all the fixes, restart, reboot, restore.  No debris in the headphone jack, and when volume is turned up or down it doesn't show headphones on the screen.  Nothing covering the earpiece.  Tried to blow out headphone jack with compressed air.  I'm thinking it is a glitch in the software.  Using Iphone 4 on Verizon.  Any thoughts or ideas?

    you can try reading the posts listed to your right in the "More Like This" box or by searching this forum.

  • HT201371 Touch ID stopped working after updating to IOS 7.1.

    Good morning to all,
    My touch ID stopped working after updating to IOS 7.1.
    It was working perfectly until the update and then it stopped recognizing my prints
    I've reset the phone and deleted my fingerprints and now I can't even add a fingerprint again.
    I am sure this is not a hardware problem since the phone was working perfectly before the update and it didn't fall nor anything similar.
    Also the sensor is clean as well as my fingers.

    Same problem... I think we all should let Apple know of this issue. http://www.apple.com/feedback/ tell them the probelm. So when they get too many complains they will surely fix it ASAP with a software update.

  • HT1414 my ipad 2 is in recovery mode but when i start up itunes and press restore itunes stops working and the window closes, what should i do?

    my ipad 2 is in recovery mode when i plug it into itunes and my comuter to restore it itunes stops working and the window close, what should i do i really need my ipad if anyone knows how to fix it i would really apreciate the help.

    I assume that you mean that the iTunes window closes. Quit iTunes, reboot your PC and try again. The iTunes software might be corrupt and it may require reinstalling iTunes on your computer.

Maybe you are looking for

  • Firefox freezing, and eventually crashing when opening a tab?

    Just yesterday this started, at first youtube videos froze the browser (but I could still hear them playing) and now I can't even open a tab without firefox freezing and just eventually having to end the process. It was working perfectly before yeste

  • In Photoshop Element 9, when opening the Organise section, the top bar does not show File, etc.?

    Just reinstalled Photoshop Ele,ents 9 onto Windows 7. In the Editt part,on opening, all is well.  This clearly show the top bar where youcan call and enter from the file to work with items on your computer. However, on the Organise section, this to b

  • Invalid namespace

    Flash Builder 4.7 The following line in the -app.xml file generates an invalid namespace error although AIRSDK 3.6 appearsas installed in the prefs dialog. application xmlns=http://ns.adobe.com/air/application/3.6 Thnks in advnce for the help.

  • HT203037 Health app not retaining Add Steps data

    I'm looking forward to using the Apple Watch to track my activity when I get it.  In the meantime, I've been manually entering my step activity in the Health app manually.  Unfortunately, more often than not, even if it seems to initially accept the

  • Making a duplicate copy of a RoboHelp WebHelp Pro project in RH9

    Greetings forum friends, I wanted to seek your suggestions for a procedure for creating a new project from an existing project. The use case here is to create the help system for your recently updated project, which requires a new help project. Here