Itunes v12.1 and iphone 3gs

I can't sync to my iphone even after 2 hours. Is there a button for sync? I have tried point and place - no result. My iPhone is old but it has so much music I ask myself how did it get there then?
nof
28/2/15

Sync your iPhone, iPad, and iPod with iTunes using USB ...

Similar Messages

  • Smart playlists syncing between iTunes 9 and iPhone 3Gs with OS 3.1

    I recently updated to iTunes 9 and iPhone OS 3.1
    On my iPhone, the songs in my smart playlists are in a different order then in my iTunes. Does anyone know how to fix this? I have tried sorting them in different ways but they keep showing up the same way on the iPhone.

    I am also having this problem, and anxiously awaiting a fix or a provision to revert to OS 3.0. I almost exclusively use smart playlists for listening to media on my iPhone and find this very aggravating. The "turn off live updating" solution just caused the playlist to disappear from the iPhone.
    I believe this has been mentioned before, but interestingly, when my iPhone is connected and I am browsing its contents in iTunes 9, the playlists are all correct and in their correct order. While browsing at the same time on the iPhone directly, they're all messed up.

  • After updating iTunes and iPhone 3gs AppleMobileDeviceService.exe initializes and takes up 50% of CPU

    After updating iTunes and iPhone 3gs AppleMobileDeviceService.exe has been taking over 50% of my CPU.  When i attempt to sync my iPhone iTunes hanges on backing up.   I have uninstalled all the apple software and reintalled it.  This fixed the problem until QuickTime updated.  Immediately following the update Apple...Services.exe went haywire agian.  Any help?

    Thanks wjosten.  I've now been through all this, and there was a lot of old 3d party phone stuff to remove.
    However, I have not progressed really.  Any other thoughts on this please?

  • ICloud with os lion 10.5.8 and IPhone 3Gs

    What a pain in the A**.  Is there anyone out there that can assist me? I would soooooo appreciate the feedback.  Not sure if its fully functional with this combination. (ICloud, Lion 10.5.8, IPhone 3Gs)  I dont want MobileMe.  I have an Mac email. I have the Iphone 3Gs with all of the updates. I just downloaded ICloud to my MAC itunes to get some of my music off the hard drive and free up space. When I synced my IPhone through ITunes, I am not able to look at my photos, emails etc (gmail etc).  Its says I need to sign in with correct password? Ive put in the correct passwords?  I used the password that I use on my mac (which works fine) but doesn't work on IPhone?  Crazy.  I authorized my Itunes, with no luck of finding the area to adding the IPhone either?  Does anyone know if its compatible? I do have an upgrade to Snow Lepoard, (that I have not upgraded to yet) but was reading in the forum, thats its not compatible with ICloud and IPhone 3Gs?
    Any one that can help would be so greatly appreciated!

    Mac OSX 10.5 is Tiger, not Lion. iCloud is not supported on Tiger AFAIK unless you login to iCloud.com. I still run Snow Leopard (which you should probably upgrade to), and iCloud is basically useless for me. The whole reason we have iPhones is so we DON'T have to stay connected to Wi-fi 99% of the time to enjoy iOS services right? lol
    If your passwords don't work, you may just want to reset them, so then both your iPhone and Mac will recognize them.

  • How to I transfer my Itunes on my Iphone 3gs to my new mac?

    How do i transfer my itunes on my Iphone 3gs to my new mac? My old laptop died so I am unable to access my itunes on my computer but would like to retrieve the songs I purchased previously.

    It has always been very basic to always maintain a backup copy of your computer for just such an occasion.
    Use your backup copy to put everything back.
    The music and pic sync is one way - computer to iphone.  The only exception is itunes purchases.
    If for some reason you have failed to maintain a backup ( not good), then you can transfer itunes purchases from your iphone.  Without syncing: File>Transfer Purchases.
    If you sync contacts and calendars to a blank computer, then they will be erased as well. Another reason a backup copy is critical.  If you enter one unique contact and calendar entry on your computer, then you should get the option to merge the data.

  • I can't trasfer music from my library in itunes to my iphone 3GS. A black ring with a line through it comes up when i try to move music onto my iphone from itunes. How can I fix this so that I can load my phone with music?

    I can't trasfer music from my library in itunes to my iphone 3GS. A black ring with a line through it comes up when i try to move music onto my iphone from itunes. How can I fix this so that I can load my phone with music?

    How are you trying to transfer it and what are your setting on iTunes.  I'm not on a computer that has iTunes at the moment so I'm going from memory and similar issue.  If iTunes is set to sync music then I don't think you can select and drag, if set to manual manage music then you can.  Also make sure you are dragging to music on the iPhone.
    Hope this helps

  • Mail crashing after update (itunes 9 and iphone  os 3.1)

    I am experiencing Mail crashing on 3GS after the update. Is anyone else seeing this? Does anyone have a solution?
    Thanks

    behoppy wrote:
    Had this problem yesterday while syncing my iphone to PC. iTunes asked if I wanted to upgrade to iTunes 9 and iphone 3.1. I agreed. The sync failed saying it couldn't identify my iphone and then asked me to restore my iphone.
    I had to do a restore to get 3.1 loaded (first time I've had a problem with an update) but I did get it done .. then had to reload all my apps, audio, video with a 1+ hr sync.
    But it did works .. and no problems of any kind (and my email works just fine)
    Phil

  • New HH3 - Issues with Kodak Printer and iPhone 3GS

    Hello,
    Here is the background:
    Previously had a D-Link DSL-G624M router and everything connected wirelessly. This included 2 laptops, Kodak ESP 5250 Printer and iPhone 3GS. Router broadcasting on channel 6 (locked).
    Since upgrading to Infinity replaced the D-Link with a HH3. Laptops connect fine but have issues with other wireless devices.
    iPhone: Seems to lose internet (not necessarily wireless connection though) intermittently. The phone remains connected to the HH3 and can be seen in the DHCP table and Home Network screens. The iPhone also reports that it is connected to the HH3. However, when attempting to access the internet using either Safari or apps it doesn't work. This can be fixed by forgetting the network and re-joining or turning Airplane Mode on and then off.
    Kodak ESP5250 Printer: This connects fine to the HH3 and remains in the DHCP table and Home Network with the correct IP Address. Laptop A is able to connect and print successfully. However, after putting the laptop into sleep mode and re-waking it it is unable to Print. The Printer is still connected to the HH3 and laptop claims it is 'Ready' but unable to print. The only way i have found to fix this is to re-install the entire Printer software!! However, Laptop B does not have this problem and can be put into Sleep mode, Hibernate or restart and the printer remain connected. I do not think it is a firewall issue as able to connect until re-waking from sleep.
    You're probably thinking the same as me that this sounds like hardware issues and not the HH3. Maybe coincidence that it started happening after changing to HH3. Maybe something wrong with the iPhone or Laptop A and/or Printer?!? Tried setting a manual channel on the HH3 as suggested by other posts but this had no effect. (Used inSSIDer to determine best channel). Also increased the IP Address lease time from 1 Day to 21 Days - but again no difference.
    Current situation: Connected the D-Link router to the HH3 using Ethernet cable. Disabled DHCP and DNS on the D-Link router and kept SSID different. Now connected all devices to the D-Link router and nothing to the HH3 and everything is working as it did previously. The iPhone remains stable and the Kodak printer remains connected to both Laptops after re-waking from Sleep Mode.
    I haven't yet contacted BT but i'm leaning towards it being a dodgy HH3. Anyone have any suggestions??
    Thanks,
    Martyn...

    For starters, there's nothing wrong with your Iphone or Kodak prn. The issue is the HH3
    I had a very similar issue connecting iMac, iPad, Macbook Pro, iPhone, Thinkpad and Canon prn via wireless to the HH3... Lots of disconnections, devices that couldn't log in, very low wireless speeds, printer not recognized, etc,etc
    I went mad, pretty much did the same things as you did: inSSIDer, changing channels, re-installing whole softw drv !, reorientating HH3 position, manually assigning IPs and channels... nothing would seem to work!
    Then I connected a Netgear router to HH3 via ethernet cable -like you did- and suddenly everything seemed to go back to normal. Here's what I found out after much head knocking:
    1) The issue is the HH3, not that it's faulty but simply put it can't deal with lots of wireless traffic. The minute you connect several devices it gets clogged up
    2) HH3 seem not to recognize WiFI printers that have a 'static' IP (not sure why)...  this was a nightmare
    3) if you have many devices connected, HH3 doesn't  seem to 'like' Apple devices or wifi Airport powered (not sure why). After sleep mode these device can't pick up IP over the air, and you need to manually renew DHCP leases. There are several reports about this in Apple forums.
    So here's what I did:
    1) I ditched the HH3
    2) I connected the Openreach router to a dual-band Netgear wndr3400 **cable** router (PPPoE connection)
    3) I re-installed the prn drv in USB mode and then added wifi printer in wifi mode while usb connected
    4) I created two-split WIFI networks; one in the channel 6/2.4Ghz frequency and another in the channels 44-48/5Ghz freq to which I assigned most devices (It seems BT Infinity wifi works best in 5Ghz channels)
    Results: all devices recognised & connected via WiFI, no disconnections, steady WIFI speed almost as fast as ethernet cable, wifi prn prints fine from all devices... No more WIFI connnectivity issues.
    I hope this helps, good luck
    (note: my current issue is that my profile dropped from 34/8 to 21/2 during testing phase)

  • HT1209 My Itunes Library and iPhone have fallen out of sync on music over the yearsare - how can I compare my itunes library with my Iphone  to see what songs are missing from my library so I can then bring my Library up to date

    My Itunes Library and iPhone have fallen out of sync on music over the yearsare - how can I compare my itunes library with my Iphone  to see what songs are missing from my library so I can then bring my Library up to date

    Hello Solid Buck,
    Thank you so much for providing the details about the duplicate song issue you are experiencing.  It sounds like you would like to remove the duplicate songs that will not play on your iPhone, but when you connect it to iTunes, iTunes only shows you one copy of the song on your iPhone. 
    In this situation, I recommend deleting the individual songs that do not play directly from your iPhone.  I found the steps to do this on page 61 of the iPhone User Guide (http://manuals.info.apple.com/en_US/iphone_user_guide.pdf):
    Delete a song from iPhone: In Songs, swipe the song, then tap Delete.
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • HT4623 I have an ipad3, iPhone3gs and iPhone5, my problem is my apple ID works all 3 devices but I need a second ID for the iPhone 5. How do I delete my ID and set up a new one for the iPhone5 but keeping my own apple ID for the iPad and iPhone 3GS

    I have an ipad3, iPhone3gs and iPhone5, my problem is my apple ID works all 3 devices but I need a second ID for the iPhone 5. How do I delete my ID and set up a new one for the iPhone5 but keeping my own apple ID for the iPad and iPhone 3GS.

    http://support.apple.com/kb/he37

  • How do I change the default locations for the iTunes music and iPhone back-up folders?

    My computer's hard drive is partitioned, with one partition having all of the Windows system files, and the other having all of my documents, music, videos, etc.  When I installed iTunes, it automatically created its music and iPhone folders on the Windows partition.  I've been able to change the default save folders for other programs to the second partition, but I'm having troubles finding this option in iTunes (I even went back and re-installed it to see if I could find it that way, but no dice).  Is there a way to change the default folders for the iTunes library and iPhone files?  It takes up A LOT of space on my Windows partition, so it would be very great to get that moved over.
    Thanks!

    You can't selectively move individual folders withing the iTunes  folder, but you can move the entire folder to, say, an external dive. To delink the iTunes application to the new library location:
    Open iTunes while holding down the Option key (Mac) or Shift key (Windows).
    In the resulting dialog, click the Choose Library button.
    Select the iTunes folder you moved to the external hard drive.
    Click Choose (Mac OS X) or Open (Windows) and then choose the iTunes Library file inside .

  • Itunes not recognising iphone 3GS. iphone is in a loop of searching..with image of connector to "itunes" on screen. Very frustrating - please help

    itunes not recognising iphone 3GS. iphone is in a loop of searching..with image of connector to "itunes" on screen. Very frustrating - please help

    Check first if your iTunes is up-to-date. If it's updated, try using a different cable or try plugging it to a different USB port.

  • HT4539 i have same apple id for ipod touch 4g and iphone 3gs so,actually i have lost the iphone 3gs so can i track the iphone location, or with the imei number something possible could happen plzzzz do reply

    i have same apple id for ipod touch 4g and iphone 3gs so,actually i have lost the iphone 3gs so can i track the iphone location, or with the imei number something possible could happen plzzzz do reply

    - If you previously turned on FIndMyiPod on the iPod in Settings>iCloud and wifi is on and connected go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone. If the iPod has been restored it will never show up. You can't use the FIndMyiPhone app  on the iPod since the app requires iOS 7
    - You can also wipe/erase the iPod and have the iPod play a sound via iCloud.
    - If not shown, then you will have to use the old fashioned way, like if you lost a wallet or purse.
    - Change the passwords for all accounts used on the iPod and report to police
    - There is no way to prevent someone from restoring the iPod (it erases it) using it unless you had iOS 7 on the device. With iOS 7, one has to enter the Apple ID and password to restore the device.
    - Apple will do nothing without a court order                                                        
    Reporting a lost or stolen Apple product                                               
    - iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number

  • Not all albums are syncing with between itunes match and iphone 5.. WHY!!!

    Not all albums are syncing with between itunes match and iphone 5.. WHY!!!

    First, disable iTunes Match on the iPhone. Open the Music app and let the content clear out. Now, in iTunes, disable iTunes Match while holding down the Option key (Shift for Windows). Quit iTunes, wait a few seconds, and re-open it. Turn iTM back on and let it complete it's scan. The songs that are "waiting" ought to get converted to "purchased," "uploaded" or "matched." Once the scan is complete re-enable the service on the iPhone.

  • IPhone 3G and iPhone 3GS won't connect wirelessly at home when PCs are off.

    Dear Apple.com,
    I have been using iPhone 3G and iPhone 3GS wirelessly at home no problems.
    I use a MAC filter on an unsecured wireless network. Only entered MAC addresses can connect wirelessly.
    However, when I turn off all the PCs at home the iPhone find the wireless network and show connected, but cannot browse websites.
    The router Linksys WRT610N is always on, so the wireless connection and permission for the iPhone MAC addresses to access the wireless connection should work?
    Any ideas?

    Is your router a model that supports a/b/g/n? If you turn off N will it work? If your N is setup at 40MHz slots it may not work as well. Can you take your wireless router somewhere else for testing? I assume you might have some issue where you are at with your Mac and that router. When you open Apple Menu/About this Mac/More Info../Network/Airport does it show your network there? From a working machine can you see your Mac from your router web interface? FYI if your router was an Apple product(Airport Express or Airport Extreme/Time Capsule) you could see all your wireless clients via the Airport Utility, even signal strength and connection speed...

  • HT201272 Hi, i am facing problem when i try to copy an App from itunes to my iphone 3GS.... when i try to apply changes the process bar complete but apps not copied in my iphone.. plz help

    Hi, i am facing problem when i try to copy an App from itunes to my iphone 3GS.... when i try to apply changes the process bar complete but apps not copied in my iphone.. plz help

    Will the app run on iPhone3GS. Some of the newer apps require IOS 5 or later. This info should be displayed witht the app in itunes store

Maybe you are looking for

  • This is the noob question of the week regarding gdm

    I am no linux noob per se. but i did something really really stupid just now. started with a fresh install of arch, added e17 and gdm. wait...did i forget something? but of course! create a non-root user. so anywho. now gdm is installed and comes up

  • Calling a stored procedure from Reports

    I am trying to call a stored procedure using oracle reports in the afterparameter code. My code is: v_ain := sp_get_ain(:P_session_id); Can someone help me out by telling what is wrong. I keep getting an error stating that sp_get_ain needs to be decl

  • Problem identifying complex type

    Hi, I have a WSDL in which the schema is defined as below: <schema attributeFormDefault="unqualified" elementFormDefault="qualified" targetNamespace="http://www.test.org/CrSer" xmlns:mysch="http://www.test.org/mysch" xmlns="http://www.w3.org/2001/XML

  • Scanning question

    I just purchased Elements 8 and am starting to scan in some old photos from a HP photosmart printer.  2 questions for advice.  1) Elements can scan from the printer either by the ip address or the id address with TWAIN.  When the TWAIN address is sel

  • Update Problemen

    Ik kan mijn Adobe producten niet updaten. Het gaat om CS5 en elements 12. Ik krijg onderstaande foutmeldingen. Soms lukt één van de updates wel, maar vaak lukken ze geen van allen. Wie kan mij helpen? Martin Adobe Extension Manager CS5 5.0-update Er