ITunes video playlist does not loop when using apple tv/airplay

I have made a video playlist in itunes, I have made sure that each video file is not set to "skip when shuffled" and I have also gone into appletv settings and ensured that looping is turned on. When I shuffle this playlist, it plays through airplay to my apple tv, but after each video in the playlist has played the playlist stops.
I would like the playlist to continue indefinitely until I decide to press stop. Does anyone have any thoughts on why this does not happen?

looping videos on Apple TV from iTunes
fixed :-)

Similar Messages

Flash media (youtube, video, etc) won't play when using Apple TV Airplay Display

I have a new Apple Tv. I have connected it to my tv and am using the tv as a second display from my iMac. The display works just fine, but if I try and play any flash based media, say a Youtube video, on my iMac while Airplay is on, it won't play.
Mind you, it isn't that I am not getting audio, it just won't play the video at all. I can even see the progress bar load fully, but it doesn't begin playing.
The second I turn Airplay off, the video will play.
This also happens with sites such as Soundcloud, and Tumblr audio posts.
Any ideas?

I connect to Airplay Display, I select apple tv, and either mirror display or extended desktop. Doesn't matter which, both have the problem.
Then, on my imac I try to play a video and it does not work. I can even hit play on a video, let it go, and THEN turn on Airplay and it will stop playing as soon as I do.

How do I set up a mail group on mac mail? All the advise on line seems to refer to 'address book' and I only have 'contacts'. The guidance does not work when using 'contacts' - can anyone help me?

How do I set up a mail group on mac mail? All the advise on line seems to refer to 'address book' and I only have 'contacts'. The guidance does not work when using 'contacts' - can anyone help me?

Create a group and send mail
http://www.dummies.com/how-to/content/how-to-create-a-basic-contact-group-in-mac -os-x-li.html
http://www.macworld.com/article/1165582/how_to_email_groups_with_mail.html
Best.

Siri does not work when used for calling a contact function

Siri does not work when used for calling a contact function

Very strange, try to turn off/on your iPhone. Or make a reset (home+power button)...
If it continues try to restore it.

Using Firefox (and having ZoneAlarm), when logging into my work email (Lotus Notes) through a secure Citrix program, a quesitonmark types as and accented "E". This does not happen when using IE (which I prefer not to use). I have turned off the anti-key

Using Firefox (and having ZoneAlarm), when logging into my work email (Lotus Notes) through a secure Citrix program, a question mark types as and accented "E". This does not happen when using IE (which I prefer not to use). I have turned off the anti-keylogger in ZA (an old, and no longer successful fix). Can anyone help? I need my question marks at work.
Thanks!
PS. my keyboard language is not set to French.
== This happened ==
Every time Firefox opened
== I tried to type a "?" in a work email using remote access.

Perform the suggestions mentioned in the following articles:
* [https://support.mozilla.com/en-US/kb/Template:clearCookiesCache/ Clear Cookies & Cache]
* [[Troubleshooting extensions and themes]]
Check and tell if its working.
May not be related to your problem but some of your Firefox Plugins are out-dated
* Update All your Firefox Plugins -> https://www.mozilla.org/en-US/plugincheck/
* '''When Downloading Plugins Update setup files, Remove Checkmark from Downloading other Optional Softwares with your Plugins (e.g. Toolbars, McAfee, Google Chrome, etc.)'''

Lenovo S8-50LC Wlan(WiFi) Does not work when use Sim Cart(3G)

Hi
Tablet Lenovo S8-50LC
Wlan(WiFi) Does not work when use Sim Cart(3G).
What is the solution for this problem?
Build Number : TABS8-50LC_S000200_150121_ROW
SoftWarw Version : TABS8-50LC_150121

Right, but if you have the SIM in the tablet and you put the tablet in airplane mode, does wifi work then? If so, it may be a bad SIM. Do you have another SIM you can try?

My iphoto 09 keeps on downloading duplicates to a temp folder without asking when I drag a photo from firefox over to iphoto to import it. It does not happen when using safari. can some one please help?

My iphoto 09 keeps on downloading duplicates to a temp folder without asking when I drag a photo from firefox over to iphoto to import it. It does not happen when using safari. can some one please help?

You're in the wrong forum. Post to iPhoto for iLife, not iPhoto for iOS.

ITunes play count does not update when iPod is connected

iTunes keeps track of how many times i play the song on my computer but does not update when I connect my iPod. Is there a way to fix this??
thanks!!

I just checked and it does update for me. I'm still waiting to see if it updates from the AppleTV though.

Itunes extra.ite does not run, im using itunes 10.2.1 on an imac OSX 10.5.8

I downloaded the greenlantern movie with itunes extra content, but the itunes extra.ite does not run, it just apear with a blac window with the music on... bu no image, should i upgrade the itunes?

Click here. This version can't sync any device running iOS 7.
(90145)

Picture came on my TV showing a plug below an itunes symbol What does it mean when my Apple TV displays the iTunes logo with a USB cable icon?

http://firecore.com/sites/default/files/imagecache/large-500px/wysiwyg_imageuplo ad/144498/IMG11.56.29_09-04-2012.jpg
What does it mean when my Apple TV displays the iTunes logo with a USB cable icon?

You need to connect to iTunes via micro usb and restore
http://support.apple.com/kb/HT4367

Table or view does not exist when using in PL/SQL block

I hav something strange...
When i execute a query it works just fine... When i use the exact same query in a function i want to create, i get the error 'table or view does not exist'
I create the function with the same user then when i'm executing the query.
For example:
select name,userid from portal.WWLOG_ACTIVITY_LOGS
if i execute this... it works fine. I get my results.
However when i create a function:
CREATE OR REPLACE FUNCTION EBUSINESS.GET_USER_CREATOR (p_userid IN Varchar2) return VARCHAR2
as
/*CURSOR c_user_creator IS
select distinct name,userid from portal.WWLOG_ACTIVITY_LOGS
where sub_domain = 'user' and action = 'create'
and name = p_userid;*/
v_creator varchar2(500);
v_ret_val VARCHAR2(500) := 'NOT_FOUND';
BEGIN
select userid into v_ret_val from portal.WWLOG_ACTIVITY_LOGS
where sub_domain = 'user' and action = 'create'
and name = p_userid;
--v_ret_val := x.userid;
--end loop;
-- Is the user in the group or not?
/*OPEN c_user_creator;
FETCH c_user_creator INTO v_creator;
IF c_user_creator%FOUND THEN
v_ret_val := v_creator;
ELSE
v_ret_val := 'NOT FOUND';
END IF;
CLOSE c_user_creator;*/
Return v_ret_val;
END;
The table or view does not exist...
I tryed with cursor, select into, for x in (select....)
Nothing works.
A select grant is a select grant right? Are there different grant you should use so you can select it into a function or just do a normal select?
I also tryed to create a view that just sais select * from WWLOG_ACTIVITY_LOGS but that doesn't work...

Are there different grant you should use so you can
select it into a function or just do a normal select? Yes. Grants on objects used in functions/procedures must be given directly to the user, and not through a role.

ORA-01435: user does not exist when using imp utility

I installed Oracle 8.1.7.0.0 successfully on WINDOWS 2000 and created a database TEST using DBCA. Then I used a script to creat a tablespace and a user in TEST databse. I could use the imp utility to import the data (a dmp file) to the TEST database without any problem. But after I applied a patch to bring up the version to Oracle 8.1.7.4.1, I got the following error when I tried to use the imp utility again to import the data (a dmp file) to the TEST database.
IMP-00003: ORACLE error 1435 encountered
ORA-01435: user does not exist
IMP-00000: Import terminated unsuccessfully
I checked that I created the same user test (as it is in dmp file I wanted to import) on TEST, and I could login to TEST using:
sqlplus test/test@TEST
The command I used is:
imp system/password@TEST file=test.dmp full=y log=importTEST.TEST.tmp
I also tried to use the following command:
imp system/password@TEST file=test.dmp fromuser=test touser=test log=importTEST.TEST.tmp
and got the same error as before.
Anyone has any clues what could go wrong? The only difference for me to import the data on TEST is that the
previous successful import was done in Oracle 8.1.7.0.0.
Is it possible that I missed something during the applying of the patch 8.1.7.4.1?
Thanks, and your help is greatly appreciated.
Jane

Ther is a set of instruction to be followed after installing the patch set 8.1.7.4.1 after running it thru OUI.They are as follows. Please complete these steps and u should not have problems any more.
When applying this patchset on Windows NT and Windows 2000, you must log onto the system as a user with Administrative privileges (e.g., as a user which is a member of the local Administrators group).
1.Disabling system triggers.
Before performing the next step, you must first set SYSTEMTRIG_ENABLED = FALSE in the initialization parameter file. To do this add the following line to your init<sid>.ora file and restart the database (see Note 149948.1 in Metalink for more information on this issue).
systemtrig_enabled=false
2.Invoke SQL*Plus (sqlplus), connect as internal and run the following:
select * from duc$ where PACK='JIS$INTERCEPTOR$' ;
If no rows were returned go to the next step. If a row was returned delete it using the following:
delete from duc$ where PACK='JIS$INTERCEPTOR$' ;
commit;
3.Invoke SQL*Plus (sqlplus), connect as internal and run the following SQL scripts with event 10520 set. NOTE: This event is not intended for regular database operation and when turned on below by the 'ALTER SESSION' command will automatically be turned off by the subsequent 'CONNECT' command.
ALTER SESSION SET EVENTS '10520 TRACE NAME CONTEXT FOREVER, LEVEL 10';
?/rdbms/admin/catalog.sql
?/rdbms/admin/catproc.sql
?/rdbms/admin/catrep.sql (This only needs to be run if you are using symmetric/advanced replication. This is not necessary for sites using dblinks and read-only snapshots if symmetric/advanced replication is not installed)
CONNECT / AS SYSDBA;
update obj$ set status=5 where type#=29 and owner#!=0;
commit;
4.You can ignore this step if you have already executed it as part of a previous 8.1.7 patch set install.
If Java has previously been loaded into the database, invoke SQL*Plus (sqlplus), connect as internal and run the following SQL DDL command(* Note:If Java has not previously been loaded into the database, skip this step).:
SQL> create or replace java system
2 /
(Note that the / (slash) is important to ensure the execution of the command).
To ensure the correct installation of the XDK in the database run the following 2 scripts (Bug 2115227):
$ORACLE_HOME/oracore/admin/initxml.sql
$ORACLE_HOME/rdbms/admin/catxsu.sql
* To determine whether Java has previously been loaded into the database:
invoke SQL*Plus (sqlplus), connect as internal and run the following:
SQL> select count(*) from all_objects where object_type like 'JAVA%';
Java is installed if you get a non zero result returned from the query.
5.You can ignore this step if you have already executed it as part of a previous 8.1.7 patch set install:
If Java has previously been loaded into the database, invoke SQL*Plus (sqlplus), connect as internal and run the following scripts which are located in $ORACLE_HOME/javavm/install ( Note: If Java has not previously been loaded into the database, you can skip this step):
load_jis.sql
jisja.sql
initjsp.sql
jspja.sql
Notes:
When running the $ORACLE_HOME/javavm/install/jisja.sql script the following error may be reported and can be ignored:
call jis_exit_java_session(0)
ERROR at line 1:
ORA-29515: exit called from Java code with status 0
Bug 1459233 was filed against this problem which is fixed in 9i.
6.If you deleted a row from duc$ in step 8 then reinsert it again. Invoke SQL*Plus (sqlplus), connect as internal and run the following SQL:
insert into duc$ (OWNER, PACK, PROC, FIELD1, OPERATION#, SEQ) values ('SYS', 'JIS$INTERCEPTOR$', 'USER_DROPPED', 0, 1, 1);
commit;
7.Enabling system triggers.
You must either remove SYSTEMTRIG_ENABLED from the initialization parameter file or explicitly set it to TRUE before attempting any other patch set post-install steps. Restart the database.
8.This step is optional - it will recompile all invalid PL/SQL packages now rather than when accessed for the first time - you can also use utlrcmp.sql to parallelize this. Invoke SQL*Plus (sqlplus), connect as internal and run the following SQL script:
?/rdbms/admin/utlrp.sql
9.Execute the following steps only if you have installed Oracle interMedia Text in the database you are attempting to modify:
If you have not previously unlocked the ctxsys account and supplied a password for that account, you need to do so. (If you have needed to use Oracle Text in any way prior to applying the patchset, you will have already performed this step, and you can skip this.) Do so by issuing the following statement:
ALTER USER ctxsys IDENTIFIED BY <passwd> ACCOUNT UNLOCK;
If you have already installed 8.1.7.2 or 8.1.7.3, go directly to step 7 below.
If you have already installed 8.1.7.1, go directly to step 5 below.
CONNECT ctxsys/<passwd>;
@?/ctx/admin/upgrade/u0801071.sql
CONNECT ctxsys/<passwd>;
@?/ctx/admin/upgrade/u0801072.sql
CONNECT / AS SYSDBA;
@?/ctx/admin/upgrade/s0801074.sql
CONNECT ctxsys/<passwd>
@?/ctx/admin/dr0pkh.sql
@?/ctx/admin/dr0plb.sql
@?/ctx/admin/dr0type.plb
@?/ctx/admin/dr0typec.plb
9.You can ignore this step if you have already executed it as part of a previous 8.1.7 patch set install:
The installation of this patch set fixes a potential security hole in the XSQL Servlet - see here for more detail. The patchset installation does not, however, modify any of the Oracle HTTP Server configuration files to reflect changes to the XSQL Servlet installation. If you have previously installed the Oracle HTTP Server, you will need to update one of the configuration files manually after the patchset installation is complete. If you do not do so, the XSQL Servlet may not work in the context of the Oracle HTTP Server after the patchset is installed. To update your Oracle HTTP Server configuration, perform the following steps:
1) Edit the file: $ORACLE_HOME/Apache/Jserv/conf/jserv.properties
2) Search for the string: "XSQLConfig.xml File location"
3) Modify the parameter wrapper.classpath on the line immediately following the above string to read: $ORACLE_HOME/oracore/admin
4) Save the file.
10.You can ignore this step if you have already executed it as part of a previous 8.1.7 patch set install:
The installation of this patch set fixes a potential security hole in the PL/SQL XML parser - see here for more detail. To load the new XML parser in to the database, run the following script as user SYS:
? /xdk/plsql/parser/bin/load.sql
11.If you are using the RMAN catalog then upgrade it as follows:
rman catalog <user/passwd@alias>
upgrade catalog;
upgrade catalog;
The post install actions are now complete and the database is now ready for use.

Bug: Histogram Does Not Update when Using Painting Tools

I was investigating something else, and I saw something not working... I'm under the distinct impression that the Histogram panel should automatically update after every operation. Having the Histogram panel displayed full-time on the screen, it should always be up to date.
However, when I Dodge or Burn or even paint color on an image, the Histogram is not updating.
If I select one of the History states I've just created, it updates.
Consider this simple sequence of operations:
I'm able to reproduce this failure in Photoshop CS5 as well, BUT NOT IN CS4 (it updates in Photoshop CS4 after every painting operation), so clearly it's not a new bug, though somehow I've managed not to notice it in my years of using Photoshop CS5.
Is it broken like this for everyone in Photoshop CS5 and 6?
Could this be some twisted attempt to try to optimize painting performance? If so, why isn't there an option to allow a user to request it to update on every operation on a fast computer with cores out the wazoo?
-Noel

More info:
Just poking around in Photoshop CS6 to see what, if anything would make the Histogram display update...
Even though the Refresh icon is disabled (and the "Uncached Refresh" entry in the fly-out menu is grayed-out), double-clicking in the topmost histogram display will force it to update (as described above by Conroy in post #1 above).
If I change the selection Channel field in the Histogram panel, mostly it does not update, but when I change between some of the settings - for example between RGB and Luminosity - the graphs update. Amazingly they revert back to the un-updated state if I switch the channel BACK to what it was!
Making a selection DOES cause it to update.
Choosing Select - Color Range (just starting the function) DOES cause it to update.
Hitting the quick mask mode button DOES cause it to update. Notably Edit in Quick Mask Mode is in the Select menu. Could an association with Select be a clue?
This bug is easy to reproduce, is shown to be a problem across multiple versions and multiple OSs, and in at least one case (Photoshop CS4 x64 on Windows 7 x64 here) it can be shown to work properly, so the code is probably not far off being right. Seems to me this should be the kind of thing a junior engineer could find and fix so someone, say, at Chris Cox's level could have it done before 5 today...
-Noel

IAS does not start when using SSL

Hello all,
I hope I hit the correct board for this question and search did find anything useful for my Problem.
We have a couple of Oracle Databases which are using IAS to serve a PL/SQL and Perl based WepApp. The Databases are 10g (10.2.0.3), and the Servers are running Novell SLES 9 x86_64 (SP 3). We need https on these Machines, so I configured the Server for SSL, created a Certificate using Wallet Manager and so on, exactly as described in the Documentation.
However when I try to start the HTTP Server with "ssl-enabled" in opmn.xml to enable SSL it does not start any more. It simply cannot load the "mod_ossl.so" Library:
Logfile says:
/opt/oracle/product/10.2.0/http_1/Apache/Apache/bin/apachectl startssl: execing httpd
Syntax error on line 246 of /opt/oracle/product/10.2.0/http_1/Apache/Apache/conf/httpd.conf:
Cannot load /opt/oracle/product/10.2.0/http_1/Apache/Apache/libexec/mod_ossl.so into server: /opt/oracle/product/10.2.0/http_1/Apache/Apache/libexec/mod_ossl.
so: undefined symbol: dbm_firstkey
I have googled and searched Metalink but did not find anything useful. I assume that "dbm_firstkey" refers to the GNU database routines (gdbm), but I am kinda stuck right now. Has anyone stumped upon this maybe?
Kind Regards
Maik

Two issues:
- this does not look like OracleAS, but like the HTTP Server from the database;
- you seem to be loading a 32 bit process (apache/httpd) into a 64 bit shell.
try starting it within 'linux32 bash' instead.

Outlook 2010 -Mailbox Cleanup wizard does not start when using cached mode

We are using Outlook 2010 with Exchange 2003 server.
Currently all users are using online mode, but for some problem, I need to persuade the users to change to use cached mode.
Recently we find that when user
mailbox reaches its size limit and try to send an email message in Outlook 2010 that is in cached mode, the email message stays in the
Outbox and the Mailbox Cleanup wizard does not start. It just prompts
for "send and receive error". As most of the user would not look for what the error is referring and just call IT to fix. Even worst is, they didn't realize that the mail is still in outbox.
I find the KB2544027 describing this issue but was not available and suggest to install 2596485.
http://support.microsoft.com/kb/2544027/en-us
I've try to install the hotfix and install Office 2010 SP2 but just doesn't work.
Does anyone know how can I fix it?
Thanks!

Hi,
Based on my research from the internal resource, this issue has been fixed in build 14.0.6126.5000 or less. I suppose that the hotfix not available because it has been involved in the release.
I’d like to confirm your Office 2010 build number so that we can conduct a deeper analysis on this issue.
In addition, make sure you have installed the latest update for Office 2010.
Best Regards,
Steve Fan
TechNet Community Support

ITunes video playlist does not loop when using apple tv/airplay

Similar Messages

Maybe you are looking for