Itunes will not install on 2nd user's account
My daughter has had an ipod for a few years and she just always used the HP administrator on our computer. We had not set up individual user acocunts for everyone in our family. When my son got his ipod for Christmas this year, I began searching for a way to get his itunes set up on the same computer. I found the "How to use multiple ipods on one computer" and created him a user account on our computer and left it with admin rights for now while trying to work this out. When I set his user account up, the itunes shortcut was there so I clicked on it. It started to install (?) itunes, but it locks up after going through a few of the processes. It has been stuck on "please wait while windows configures itunes" with a time remaining of 4 seconds for over 4 hours. I have tried restarting our computer, I have tried turning it all the way off, and keep getting no further than that. I have spent hours looking through topics and answers and have not really found an answer to what I am dealing with (even though I am sure it is there somewhere). Any help would be greatly appreciated. We are using Itunes 8.0.
Same error message "This version is for a 32 bit computer, yours is a 64 bit!"
Doublechecking ... by any chance did you migrate a 32-bit version of the iTunes, Apple Mobile Device Support and Bonjour programs to the 64-bit machine from a 32-bit machine using the PC Mover utility?
(Your symptoms are consistent with that ... the installer service throws the message when trying to uninstall the 32-bit itunes and related 32-bit componentry prior to installing the new 64-bit versions.)
Similar Messages
-
I would like to be able to use my IPAD. Itunes will not install. It tells me it cannot start Apple Mobile Device Services I am using XP service Pack 3. I am the administrator. The message also says to verify that I have sufficient privileges to start system services.
Thank you,http://tinyurl.com/3hs3g2u
-
iTunes will not install on my computer (Windows 8) and i tried everything in "Issues installing iTunes or QuickTime for Windows" but nothing worked. any help?
Many thanks.
Error 7 (Windows error 127)
Try the following user tip:
Troubleshooting issues with iTunes for Windows updates -
ITunes will not install correctly on my PC with Windows 8. Any hints?
iTunes will not install correctly on my PC with Windows 8. Any hints?
The error message reads:
iTunes.exe - Entry Point Not Found
The procedure entry point ADiAdlD_AcquireMatchSlotIfNecessary could not be located in ghe dynamic link library C:\Program Filess(x86)\iTunes\iTunes.dll.See this User Tip by turingtest2
Troubleshooting issues with iTunes for Windows updates -
Itunes will not install correctly Error 7 Windows error 126 Problem is MSVCR 80 not found
Itunes will not install I get a error message ERROR 7 Windows error 126 When I try to open Itunes MSVCR80 Not found
Try the following user tip:
Troubleshooting issues with iTunes for Windows updates -
I tried to reinstall iTunes 10.5 on an older PC using Windows XP. iTunes will not install. Tthis is the full error message. Could not open key: HKEY_LOCAL_MACHINE\software\classes\CLSID\{063D34A4-BF84-488D-B699-E8CA04DDE}
Please HelpI was able to solve this problem using the utility explained in this post:
http://blogs.msdn.com/astebner/archive/2006/09/04/739820.aspx
Thanks!
Dell Windows XP -
ITunes will not install on a 64 bit PC Win 7
iTunes will not install on a 64 bit PC running Windows 7 with all updates.
Most answers send you to a "cleaner" of somekind that check for errors in you PC and then wants to charge you to clean it. My PC is CLEAN.
Something is keeping iTunes from installing and running. Tried 64 bit, 32 bit and all help desks.
Same error message "This version is for a 32 bit computer, yours is a 64 bit!" I know that and only install the 64 bit version!!!Same error message "This version is for a 32 bit computer, yours is a 64 bit!"
Doublechecking ... by any chance did you migrate a 32-bit version of the iTunes, Apple Mobile Device Support and Bonjour programs to the 64-bit machine from a 32-bit machine using the PC Mover utility?
(Your symptoms are consistent with that ... the installer service throws the message when trying to uninstall the 32-bit itunes and related 32-bit componentry prior to installing the new 64-bit versions.) -
Itunes will not restore my 2nd gerneration ipod shuffle giving error1418
Itunes will not restore my 2nd generation ipod shuffle. I am getting an error 1418. I am running Windows Vista so none of the fixes that I have seen seem to work for me. Is there anything else that I can try or am I ipodless until Wednesday or Thusday when the new I pod arrives? And I thought Sleepless in Seattle was bad. Shuffleless in Seattle is much worse.
Have you tried all the steps here:
http://docs.info.apple.com/article.html?artnum=304508 -
Itunes will not install. I get the error message "Error writing to file: C:\Program Files\Common Files\Apple\Mobile Device Support\com.apple.IE.client_main.dll Verify that you have access to that directory."
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards? -
Itunes will not install on windows 7 home
Any one had this issue
Itunes will not install on windows 7 homeGo to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (Later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
See also HT1925: Removing and Reinstalling iTunes for Windows XP or HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
Should you get the error iTunes.exe - Entry Point Not Found after the above reinstall then copy QTMovieWin.dll from:
C:\Program Files (x86)\Common Files\Apple\Apple Application Support
and paste into:
C:\Program Files (x86)\iTunes
The above paths would be for a 64-bit machine. Hopefully the same fix with the " (x86)" omitted would work on 32-bit systems with the same error.
tt2 -
Itune will not install on windows 7
I had to do a full restore on my HP laptop and now Itunes will not install I am running Windows 7
Do you get an error message when you try to install iTunes? If so, what does it say? (Precise text, please.)
-
I have windows 7 64 bit but the new itunes will not install because it can't find itunes64.msi. I have searched evertwhere on my pc. In addition, I can't uninstall the itunes and reinstall for the same reason. I can't upgrade for my icloud account.
Try the following steps:
1. Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
http://support.microsoft.com/mats/Program_Install_and_Uninstall
Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.
2. You should remove all instances of iTunes and the rest of the components listed below:
it may be necessary to remove all traces of iTunes, QuickTime, and related software components from your computer before reinstalling iTunes.
Use the Control Panel to uninstall iTunes and related software components in the following order:
iTunes
QuickTime
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Follow the instructions from Apple article listed here: http://support.apple.com/kb/HT1923 to remove all components
3. Reboot your computer. Next, download iTunes from here:http://www.apple.com/itunes/download/ and install from scratch -
itune will not install correctly on my PC Error message reads "service 'apple mobile device' failed to start
Hello cynthialane,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
How to restart the Apple Mobile Device Service (AMDS) on Windows
http://support.apple.com/kb/ts1567
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Best of luck,
Mario -
Itunes will not install..windows INSTALLER service not available.windows 7
I am trying to find a fix for this...just bought a new computer with windows 7, all updates have been performed. Itunes will not install...it just stops and says "windows installer service not available" Can't find a stand alone downloadable version of installer 5.0 which is what comes with 7 from the research I have done. I have the newest version of itunes saved on desktop, tried running it from desktop, tried running as admin, tried several other ideas that I found on here and Microsoft..but nothing is working. Any advice?
Message was edited by: ehindahlSame error message "This version is for a 32 bit computer, yours is a 64 bit!"
Doublechecking ... by any chance did you migrate a 32-bit version of the iTunes, Apple Mobile Device Support and Bonjour programs to the 64-bit machine from a 32-bit machine using the PC Mover utility?
(Your symptoms are consistent with that ... the installer service throws the message when trying to uninstall the 32-bit itunes and related 32-bit componentry prior to installing the new 64-bit versions.) -
iTunes will not install. It says I do not have authorization to make changes on the computer. I am the administrator.
What's the precise text of that error message please? (There's a few different ones I can think of that you might be getting.)
Maybe you are looking for
-
How to convert a 2D array of pixels in to a grayscale planar image
Im having following problems, I hope someone may help me. 1. I want to convert a 2D array of pixels (Grayscale values) into a Grayscale PlannerImage. I tried the following code I found on net. The steps to do this are: -Construct a DataBuffer fro
-
Hi, I need help desperately. The following is an example of the data that I have. I have two tables one name Customers and the other named Orders. The tables have the following attributes CUSTOMER CustomerNum, CustomerName, OrderNum ORDER OrderNum, O
-
I had hidden (clicked on the eye from the layers panel) a path BEFORE creating a group. Using the Subselection tool I able to click on the object, but I can't get it to show up. In other words I can't "click on the eye" because the layers panel only
-
Photos in last import, smart album, not in events, or photos
I just build a new iPhoto library, from a large folder of masters. It took many hours to complete, and all photos and events showed up that I imported. I exited the program, had it commit all changes to database. I reopened iPhoto and imported my iP
-
Hi All, I've used HSODBC on Windows platform with MS Access. I prepared a document for my reference may be it is bit helpful to you also. Any suggestion and comment is highly appreciated. Oracle's Heterogeneous Services (HS) Heterogeneous Services (H