ITunes will not uninnstall or reinstall
I removed quicktime but I cannot remove itunes... for me it says:
The feature you are trying to use is on a network resource that is unavailable.
Click OK to try again, or enter an alternate path to a folder containing the instillation package 'iTunes.msi' in the box below. When i use my source, it says that I cannot access it or it cannot be found.
Please help
with that one, let's try the following procedure.
first, head into your Add/Remove programs and uninstall your QuickTime. if it goes, good. if it doesn't, we'll just attend to it when we attend to itunes.
next, download and install the Windows Installer CleanUp utility. use it to clear any existing itunes and/or QuickTime installation configuration information from the PC.
Description of the Windows Installer CleanUp Utility
next, use the the following document as a guide for manual removal of leftover itunes and quicktime program files:
Removing iTunes and QuickTime for Windows
now try another itunes install. does it go through properly this time?
Similar Messages
-
Itunes will not open message reinstall itunes error 7(windows error999)
I have unistalled and reinstalled several times will not open. Running windows 7, worked for a few weeks then this message error 7(windows error999)
Solving the iTunes Installation Problems in Windows
1. Apple has posted their solution here: iTunes 11.1.4 for Windows- Unable to install or open - MSVCR80 issue.
2. If the Apple article does not fully resolve the problem for you, then try Troubleshooting issues with iTunes for Windows updates - MSVCR80. -
Error code msvcr80 after last update now itunes will not open
Error code msvcr80 after last update now itunes will not open. Reinstalled and still does not work
Click here and follow the instructions. If they don't work, perform a complete reinstallation (Windows XP, Windows Vista and newer).
(98968) -
Just tried 3 times to update iTunes on my PC running Vista. There was an error. It stopped the installation. Now iTunes will not start at all. The error message tells me to reinstall which I tried but did not work. What should I do?
Hello, Jdragone.
Thanks for the question. Start with completely uninstalling iTunes and all of it's components in the order specified in the article below. Once this is done, download and install iTunes.
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
If you receive any errors when uninstalling any components of iTunes, try the steps in the article below for each component that gives you an error.
"The feature you are trying to use is on a network resource that is unavailable" alert appears when removing Apple software in Windows
http://support.apple.com/kb/TS3704
Cheers,
Jason H. -
My itunes will not work at all. i have deleted and reinstalled in over ten times, i have ended the process, i have reinstalled quicktime i few times, i have deleted many folders such as TEMP, itunes helper et What else can i do? Please help:(
Now it sometimes keeps coming up and working but once i plug an ipod in it freezes my whole computer up and no i dont get any response from itunes at all
-
My Itunes will not stay open. Everytime I open it it just gives me a wait signal and then closes down on it's own. I have uninstalled it and reinstalled it and it still won't stay open.... what should I do now?
Try removing the Genius database. In the "Finder" go to the /username/Music/iTunes/ folder and delete the "iTunes Library Genius.itdb" file. This may allow the program to launch again. This file will be recreated upon first use of the "Genius" feature.
-
My itunes will not open, it displays an error that MSVCR80.dll is missing. I tried reinstalling itunes but it fails because the service is not able to start.
Same thing happened to me. I ended up completely uninstalling itunes then downloaded it again from http://www.apple.com/itunes/. If you're using firefox, for some reason itunes will not download and I don't know if using googlechrome will also have problems,so just to be sure that it will work on your first try, use internet explorer when you download itunes. Good LUCK!!
-
My iTunes will not start in Win XP. I am getting an error that says MSVCR80.dll can't be found. I am concerned that if I just do a reinstall
of iTunes it will overwrite or delete all the music and apps I have on the current app that won't start. When I boot the PC I get the following:
APSDaemon.exe - unable to locate. MSVCR80.dll not found. Reinstalling application may fix this problem. How can I get iTunes started without losing
all my music and apps? ThanksIt won't unless a problem occurs. Back them up, uninstall iTunes and all related components, and reinstall them.
(100013) -
My iTunes will not start. The box on the error message APSDaemon.exe, And message says "This application failed to start because MSVC80.dll was not found. Reinstalling may fix." I did the reinstall and I get the same error. The error first happened after I approved the an iTurns update.
Same problem today. Took five times to reinstall without any error messages. Apple has posted a way to fix and you should follow their's first. I finally got to upldate correctly by doing their fix but with one difference. I did the following:
1) Went to the C:\program files (x86)\iTunes and C:\program files\iTunes folders and moved every file ending in .dll to the desktop (even if two files in same location had the same name, just replace)
2) Restarted computer and still got error message
3) Uninstalled all apple programs possible in the following order......itunes, apples software update, apple mobile device support, bonjour, and apple application support.....all performed using the microsoft control panel
4) put all the .dll files on the desktop in the trash and emptied (this is a step apple support did not specifically put in their fix but for a final try I wanted to delete everything apple).
5) Restarted computer.
6) Re-installed itunes from apple website
No error messages during re-install and was able to open shortcut in one try. Even updated my ipad to make sure everything was working. -
My Itunes will not start after the latest update. I keeo getting error message tEventType : InPageError P1 : c000009c P2 : 00000003 . I have tried to reinstall but no joy. Any advise?
'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards? -
I recently upgraded my Itunes softeware, now itunes will not recognize my IPod Classic. If I delete the current IPod software and reinstall it, would this solve the problem, and if so, I'll need step by step instruction.
Yep.
Take a look here:
http://www.snsforums.com/index.php?showtopic=235
It appears that SANmp is indeed the most likely source of your problem. -
iTunes will not open on my Windows 7 computer. I've uninstalled it and reinstalled it, but it still won't open. I'm trying to synch my iPad and iPhone, which I haven't done for awhile, but right now I'm having no luck. I'm sure there is a switch I need to turn on or off, but have no idea where to find it. Can someone help?
In the course of your troubleshooting to date, have you worked through the following document?
iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues -
Hi- I applied the iTunes up to my Windows 7 86bit PC last Wednesday and iTunes will not load due to a Runtime error r6034Access to C Runtime Library Incorrectly. Then I get an windows error code 1114. I have tried rollling back and reinstalling but no joy
Hi Keen itunes User,
Thanks for using Apple Support Communities. This article has steps you can take for the error you're seeing:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
- Ari -
I have windows 7 64 bit but the new itunes will not install because it can't find itunes64.msi. I have searched evertwhere on my pc. In addition, I can't uninstall the itunes and reinstall for the same reason. I can't upgrade for my icloud account.
Try the following steps:
1. Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
http://support.microsoft.com/mats/Program_Install_and_Uninstall
Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.
2. You should remove all instances of iTunes and the rest of the components listed below:
it may be necessary to remove all traces of iTunes, QuickTime, and related software components from your computer before reinstalling iTunes.
Use the Control Panel to uninstall iTunes and related software components in the following order:
iTunes
QuickTime
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Follow the instructions from Apple article listed here: http://support.apple.com/kb/HT1923 to remove all components
3. Reboot your computer. Next, download iTunes from here:http://www.apple.com/itunes/download/ and install from scratch -
my itunes will not open the itunes store...it will will attempt to open and then simply stop trying.... also everytime I open Itunes it will run my cpu up to 100%...this makes my computer run really slow. my frustration is it didn't do this untill two days ago when I downloaded the suggested apple updates....I already uninstalled it in the order suggested online and reinstalled, but I still have the same problem I am kind of frustrated and just want to know how to fix it?????? please help
It worked for me, for iTunes Store and Safari both!
amandav2 wrote:
I found a solution to my problem.
> start menu
> accessories,
> right click on the command prompt icon and choose "run as administrator".
Once it opens, type in the following command...
netsh winsock reset
hit enter
You should get a message that the winsock reset successful and you will need to reboot your computer.
Reboot and when I reloaded itunes the store loaded fine.
Maybe you are looking for
-
Eror in r3: No vendor Specified
Hi , I am facing problem with server proxy for inbound interface . I am getting error"No Vendor Specified" , while activating the server proxy. Thanks In Advance
-
HP Laserjet Pro MFP M125A " A Fatal Error Occured Preventing Product Use" on Window XP SP3
Dear Friends, I really need your help on this issues, recently company that i been working buy 19 Unit of HP Laserjet Pro MFP M125A printer to be install at our 19 branches. All of our branches is using Window XP SP3 and the spec is exceed the minimu
-
BlackBerry Storm Not Working Please HELP!
One day iI was using My BBS like any other day and it turned off unexpectedly. I tryed turning it back on and that did not work. I charged it, that also did not work. Then after that I even bought a Brand New Battery. That also did not work. Then I b
-
Copy Paste Image instead of Upload
Hey Guyz, I wanted to give user a provision to copy & paste an image instead of uploading it in a provided space on the webpage. Do you guyz think it's possible if so can you guide me thorough.. Thanks... Krish
-
Drag from vbox to list??
Hey all, I've been having a heck of a time trying to get this to work, basically I have a list of components on one panel in a vbox, and I want to drag them into a list on the right panel. How do I tell the list to accept a drag drop action coming fr