ITunes won't let me move files to new hard drive

Hey, all...I'm having a really major problem with my computer. I'm trying to move my iTunes library to a new hard drive. Currently, it's in a 1-terabyte Western Digital USB drive powered through the USB, and I'm trying to move it to a Seagate 1-terabyte drive. I currently have 535 gigabytes of media in my library and I have a MacBook with a 250-GB hard drive that I don't store any music on currently.
I move the library file over to the new USB hard drive, and I consolidate my library as it asks me to do. Then, when I go down to "Organize library", it prepares to copy the files to the new disk, then gives me the big red stop sign and tells me "The disk cannot be read from or written to." and that's that. The files work fine when I try to play them, so they're there, and presumably, not irretrievably damaged. They're just impossible to move.

A reply to an old problem, but I couldn't find this solution anywhere. I had the same problem when I moved my iTunes library to an external drive. As Apple recommends, I used File > Library > Organize Library > Consolidate Files to copy my music files from my overstuffed hard drive to the external drive. Copying went fine for a while, adding about two-thirds of my files to the new drive without incident. Then I got the big stop sign with the error message: "Copying files failed. The disk could not be read from or written to."
This turned out to have nothing to do with either the hard drive or the external disk. I had a bad file in my music library that was shutting down the consolidation process. Unfortunately the error message says nothing about which file may be the culprit. All I could think to do was to go back to my original library in iTunes and sort by Artist, select all cuts with artists beginning with A, right click and select "Consolidate Files". Then do the same with B artists, etc. Proceeding this way, files resumed copying but when I got to the "S" selections, the consolidate process failed again. Then I selected smaller and smaller batches until the problem file was identified. Removed it from my library and then Consolidate worked fine through the rest of the library. Problem solved.
I spent several days working through this; hope I can save someone else the time.

Similar Messages

Itunes won't let me add files from external hard drive

I've been having this problem with my external hard drive and I don't know if it's my computer or iTunes, but I would appreciate any help.
Recently, for some reason, all my songs went missing on iTunes and iTunes would freeze a lot. I reinstalled iTunes and now it's working fine. The problem is, I store my music on an external hard drive and I'm trying to add my files back by going to "Add Folder to Library", but it works every time I do it.
At first, I thought it was freezing because my drive is so big, so I did it folder by folder (organized by artists) and it will work fine for small folders, but if it's a folder with like more than one album, iTunes will crash. At first, I thought something was wrong with one of the music files, but that's not it because it happens with any large folder.
I used to use iTunes Updater, which would update all your songs for you, but now that program doesn't work with the latest version of iTunes. Thanks for any help.

This might be worth a shot - basically seeing if Vista permissions could be the culprit.
Give yourself FULL control and ownership of the exHD, let's call it M:
How to Take Ownership and Grant Permissions in Windows Vista
Take control of the top level folder and ALL subfolders.
Try creating a new blank ITL file on M: by pressing *and holding* the shift key while itunes starts. See if you can add everything again.

.DS_store won't let me move files from one external drive to another

I am trying to move some music files from one external harddrive to another. They are both connected to my mac mini.
In the "from" harddrive I have a folder with a bunch of music files in it and it also has a new file in it called DS_store. When I open this folder and select all, it naturally selects all of my music files and this DS_store file. When I try to drag all of this to the "destination" harddrive I open the folder that I want to drag them to which already has some music and it has the DS_store file too, it won't let me drag the files to it   It says something like there is already a DS_store file there. So I tried deleting that file from each external drive and it just reappears.
If I create an empty folder in the destination drive, I can drag all of the files to it. The problem is I want the new files to be in the same folder with the older files.
In addition there are a few other ghost type files that have shown up too.
Any suggestions would be welcome. Thanks.

If you're copying from a FAT-formatted volume, do as below.
Back up all data.
Select the text on the line below by dragging across it. Don't include the blank space at the end of the line. Only the text should be highlighted.
dot_clean -m
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the page that opens.
Now switch to the Finder and and select the icon of the FAT volume. Drag into the Terminal window. More text will be added to what you entered.
Click in the Terminal window to activate it, then press return.
The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear. Then quit Terminal and try the copy again.

Mac won't let me move files into a folder bc it THINKS there are duplicate files - but they're not

Mac won't let me move files into a folder bc it THINKS there are duplicate files - but they're not. There are hundreds of what it thinks are duplicates. How can I get it to let me put them all into a folder and create unique names? If I do one file at a time, it gives me the option to keep both files. But not when I am moving hundreds at a time.

A reply to an old problem, but I couldn't find this solution anywhere. I had the same problem when I moved my iTunes library to an external drive. As Apple recommends, I used File > Library > Organize Library > Consolidate Files to copy my music files from my overstuffed hard drive to the external drive. Copying went fine for a while, adding about two-thirds of my files to the new drive without incident. Then I got the big stop sign with the error message: "Copying files failed. The disk could not be read from or written to."
This turned out to have nothing to do with either the hard drive or the external disk. I had a bad file in my music library that was shutting down the consolidation process. Unfortunately the error message says nothing about which file may be the culprit. All I could think to do was to go back to my original library in iTunes and sort by Artist, select all cuts with artists beginning with A, right click and select "Consolidate Files". Then do the same with B artists, etc. Proceeding this way, files resumed copying but when I got to the "S" selections, the consolidate process failed again. Then I selected smaller and smaller batches until the problem file was identified. Removed it from my library and then Consolidate worked fine through the rest of the library. Problem solved.
I spent several days working through this; hope I can save someone else the time.

Macbook Pro won't let me move files to HD without authentication. Also when I try to move files from the HD to the desk it just copies them.

My 2013 Macbook Pro running Mavericks 10.9.5 won't let me move files to the HD without authentication. So I have to keep putting my password in. Also when I try to move files from the HD to the desk it just copies them. This just suddenly happened last night. Anyone have any ideas what it could be? Thanks

See http://support.apple.com/kb/HT1229?viewlocale=en_US - I doubt that it will solve your problem, though. You may want to post on the iPhoto forum - that's where all of the iPhoto experts hang out.
Good luck,
Clinton

Updated to latest operating system on MacBook Pro and now won't let me drag files onto a flash drive.

Updated to latest operating system OS X Mavericks on MacBook Pro and now won't let me drag files onto a flash drive.

The Flash Disk must be NTSF formatted. Writing to NTFS requires 3rd party drivers (Tuxera, Paragon). Reading from NTFS however does not require these. So install NTFS drivers, or format the drive in FAT32 from Disk Utility.
Hope this helps :-)

I'm not able to move files from my mac to my hard drive, but i can move files from my hard drive to my Mac. Would really like to make more room on my mac-any suggestions to get these files onto the hard drive?

When i plug my external hard drive into my mac i'm able to see all the files on it and move files off the hard drive to the mac, but not the other way around. I need to make more room on my mac and would really like these files to be on this particular external hard drive. Any help would be great!
Thank you
Kris

Thank you all. Sounds like i might as well buy a new (mac OS supported) external hard drive. Not worth the hassle/risk of taking all the old files off my current external HD.
Really appreciate all your help!
Kris

Finder freezes when trying to move files to external hard drive

Whenever I try to move files from internal hard drive to my external finder freezes it. I have over 5 TBs of free space on my external, so I know it's not a space issue. This happens no matter the size of the file. It starts the copy and then will freeze before it finishes. If I try to force quit and select relaunch it acts like it is relaunching but my icons never re-appear and the command bar at the top never returns. So I end up having to hard boot.
I just reinstalled the 10.5.8 combo update and verified both hard disks, if any repairs came up I repaired and then did the same with disk permissions....it's still freezing on me. I am frustrated because there are some files I'd really like to move to my external raid hard drive but I'm not able to.
The freezing happens if I'm trying to transfer files from a disc or an additional external HD. My internal HD is only so big and the external Raid drive is for my capture scratch on Final Cut Pro and I'm even having issues capturing to that drive. Everything wants to be on my internal HD and that doesn't work for me.
Any help would be greatly appreciated.

Sean Dale1 wrote:
Do you get any error messages and if so what are they? Do you have any problems copying files off the problem drive back to your Mac or do the freezes only occur when copying to the external?
No I don't get any error messages, the finder just freezes and when I try to relaunch finder it doesn't relaunch properly..all icons are missing and I'm not able to access the the task bar to properly shut down so I have to hard boot.
It happens only when trying to save files to the external, whether through drag and drop or within programs. I am able to access files on the external and copy files from there to my internal without problems.
Have you tried attaching this drive to another Mac and if so do you get the same issues?
I don't have another Mac to attach the drive to.
How is this RAID attached, SCSI, FireWire, SATA or what? How was the RAID created, Disk Utility or third party software and have you verified the integrity of the RAID?
The RAID is attached via SCSI. In an attempt to solve this finder issue I re-installed the drivers to the most current drivers available and in doing so updated any firmware....and there was no change. I was not the one who set up the RAID so I don't know how it was created. It's an Enhance UltraStore R16 and I've been using it without issues since January 2007 and this freezing thing has been intermittent for a few months now but now it's constant and annoying. I've verified the disk through disk utility but I don't have any software to check the integrity otherwise. Do you have any recommendations as to what software I could use to do this?
Message was edited by: Emily80

Can't move files around primary hard drive or to trash without authenticating

Just installed Lion and now whenever I drag a file to a folder on my primary hard drive, I have to authenticate. Same with sending stuff to trash. When I do get it to trash, the items disappear without me telling it to empty trash.

After much searching, trial, and error, I may have found the answer to my own question. I clicked on the primary hard drive icon, and then opened the File --> Get Info window. I unlocked it with the password. Then, under Sharing & Permissions, I clicked on the + to add both me and admin to the access, and gave both Read & Write privileges. I then told it to apply to all items inside the hard drive. It took a while to apply, like a half hour, but when it was done, I restarted and then I could move stuff around the hard drive and into the trash without being prompted for authorization.

How to Move Masters to New Hard Drive?

First, like many of you, my computer is nearly 95% photos taken. This is how I've operated in years past: Did shoot, dumped on Aperture. When the computer got full I moved everything over to an external hard drive even though the respective Aperture libraries did not link up with the photos anymore. Now, that I am selling stock, I need to have full access to all my images, so I can upload and sell them.
I moved my library over to my new 1-terabyte hard drive, but my images are still coming from my "pictures" section on my main computer drive. When I tried tried to Aperture: File: Relocate Masters, the computer started consolidating the images and telling me there was no longer a link to some previewed images. Remember, I moved many images from 2007-2009 to external hard drives. (I'm sure compared to many of you; I'm an unorganized mess.)
So, my questions are: How do I get my photos from my main drive to my new hard drive? And, can I delete the raw files taking up 95% of my computer space that are stored at "pictures" after I move them? And, how can I link my previews back to the images I moved to external hard drives?
Thanks in advance!

If you have a mess, I would recommend that you let Aperture do the heavy lifting for you. (With thanks to Rob Boyer for this suggestion.)
ASSUMPTION: You do not have enough room on your internal HD to simply run a Managed Library and still have about 25% free space and you must therefore use Referenced Masters.
ASSUMPTION TWO: You know the arrangement that you would like to have.
Step .5: Backup everything. I recommend cloning your entire system. You want a safety blanket in case you make a mistake. Take the clone off line, unplug it, keep it safe.
Step One: Set up the arrangement of Folders and Projects that you want in Aperture. You don't have to worry about all of the albums you may want, just your bottom line, basic stucture.
Step Two: Opening one Project at a time, consolidate all of the Masters for a given Project into your Library. Move, don't copy.
Step Three: Still working one Project at a time, Relocate the Masters to a Library folder(s) located whereever you wish. Work slowly, setting up some simple structure that you understand. Again, move, don't copy. N.B. You are doing all of this using Aperture's commands, not/not using the Finder. Sub note, you have the option of renaming your files, should you wish.
Step Four: Using the Finder, check your work. The master files should have disappeared from their original location and now appear in your new Libarary folder(s).
Step Five: If all is well, move to the next Project. If any links are broken, fix them as you go. If all else fails, delete the Versions in Aperture (being careful NOT to delete any any Referenced Masters) and reimport into the correct Project.
Again:
-- Organize the images in Aperture
-- Consolidate the images (move) into the Aperture Library.
-- Relocate (not Export) the Masters out to the pristine folder/file structure of your choice.
N.B. Never, ever, on pain of Aperture death, move or change your Referenced Masters. (You can let other programs READ them.)
Hope this is helpful.

IPad won't sync with old iMac with new hard drive.

The new drive recognizes the iMac, and the photos on the iPad were successfully imported into iPhoto, but 2 home videos on the iMac will not transfer. I have tried to manually drag and drop, different cords and ports, over wi-fi, etc... The Summary box says the iPad has never backed up to this computer, but when I try to do that, it tries and then stops with no error message. The Movies tab has the two videos I want to transfer, but the sync button is gray. I have hard rebooted the iPad and restarted the iMac. Also deauthorized and reauthorized the iMac. I suspect that somehow the iPad is not recognizing the new hard drive. Is that possible? Any suggestions? Thank you for your help!

I don't mean the latest version of iOS. I mean the latest version of iTunes on your Mac.
Open iTunes on your Mac. Click Help and then Check For Updates

MDD freezes when transferring files to new Hard Drive.

I am using a G4 MDD Dual Processor Tower with 1 GB DDR SDRAM, Dual 1 GHz and an 80 GB hard Drive on an ATA/100 controller, using a cable select cable (OEM). I just installed an additional PATA Western Digital WES-WD3200JB 320 GB hard drive. Both drives are on the ATA/100 and on Cable Select mode. The 80GB hard drive (which has the system installed on it) was originally installed in the slave position (and still is). I zeroed the drive and did a PRAM reset before I partitioned and formatted the drive.
I have had freeze up troubles when I try to transfer files from the old 80GB Hard Drive to this new 320 GB one. I have tried transferring files from a DVD to this new Hard Drive without a problem. I have tried transferring that same load of files from the new Hard Drive to the old one without a problem. The only time it seems to freeze up is when I try to transfer a large number of files from the old Hard Drive to the new one. The problem doesn’t occur with large files, just with a large number of files. For example, I have transferred a single 917MB file without a problem, but when I try to transfer a folder that has 158 items totaling 38.6 MB, that is when my computer freezes up. However, I have frequently transferred folders containing a few (under 20) files that are under 5 MB without a problem.
I have considered putting the new drive on the ATA-66 controller instead of the ATA-100 (as several Apple forum posts recommend), but I would rather figure out why the freeze up occurs in only this specific set of circumstances.
Any theories on what is causing this freeze up, or suggestions on how to fix it would be greatly appreciated. Thanks!

ATA doesn't share a bus very nicely, you can always put the WD 320 over to ATA/100 or do that now, but yes, isolate them.
You may have directory problem or bad sectors, so eliminating that would be another step.
Some people even recommend zeroing a new drive right off the bat.
PATA should not have the problems of SATA, but you might want to look into whether this drive has come up in other problems. OWC includes it in one of the FW cases also.
And you could move your OEM to FW case, can't imagine continuing to use the OEM drive at this point (they were slow and had only 2MB cache then, I use mine for an emergency FW backup system).

Cannot get into iTunes and app store on my mac after new hard drive instillation

i had a new hard drive put into my mac recently, and since then i have not been able to access the app store or iTunes on my mac, which will also not allow me to sync my phone to it anymore as it is now not authorized to do such. I have contacted apple support, reinstalled the OS, and have enabled 2 step verification to verify my mac as a device, yet still will not work, is there any other way to fix this?

Can't connect to the iTunes Store
OS X: "Cannot connect" or "Cannot connect to the App Store. An internet connection is required"

Itunes won't let me move songs?

When I try and move a list of songs from my iPod, to a newly created playlist it won't let me do it? Can anyone shed any light?
Thanks
Btw, I am on a Mac Book Pro Retina, latest updates on everything. If that makes a difference?

iTunes only lets you move items purchased from the iTunes Store from an i-device to a computer. You can copy anything the other way.

ITunes won't let me move ringtone to iPhone

Hi all,
My Mom has recently upgraded her iMac. Since then, she has wanted to put a new ringtone on her iPhone. I've tried to walk her through the steps (creating the .m4r, etc.) and she wasn't able to do it. So, since I happen to be over for the holidays, I thought I would give it a go. And now, I have found out why she's got problems... but I don't know the solution.
I've checked on the "Tones" tab on the iPhone listed on the left side of iTunes and I noticed that the "Synch Tones" was not checked. So, I checked it. And now, this is the message I'm getting:
"The iPhone “XX XX’s iPhone” is synced with another iTunes library. Do you want to erase this iPhone and sync with this iTunes library?
An iPhone can be synced with only one iTunes library at a time. Erasing and syncing replaces the contents of this iPhone with the contents of this iTunes library." (Cancel) or (Erase and Synch) are the two options.
Now, there is no music on the iPhone (it's all saved on the iTouch and Nano) but there are about 300 photos. If I choose (Erase and Synch) will I lose anything from the iPhone or from iTunes? My guess is no... and that it won't touch the photos on the iPhone. My guess is that it won't erase anything (as there is no music to erase on the iPhone), but that it will transfer the entire iTunes Library onto the iPhone (which I don't want to do either, but I can remove that, I assume).
Can someone varify for me that clicking on the (Erase and Synch) will NOT delete the iPhone photos? I know they're backed up somewhere, but I'm just trying to figure this out for her before I leave.
Thanks very much and Happy 2013!
...Stacy

A reply to an old problem, but I couldn't find this solution anywhere. I had the same problem when I moved my iTunes library to an external drive. As Apple recommends, I used File > Library > Organize Library > Consolidate Files to copy my music files from my overstuffed hard drive to the external drive. Copying went fine for a while, adding about two-thirds of my files to the new drive without incident. Then I got the big stop sign with the error message: "Copying files failed. The disk could not be read from or written to."
This turned out to have nothing to do with either the hard drive or the external disk. I had a bad file in my music library that was shutting down the consolidation process. Unfortunately the error message says nothing about which file may be the culprit. All I could think to do was to go back to my original library in iTunes and sort by Artist, select all cuts with artists beginning with A, right click and select "Consolidate Files". Then do the same with B artists, etc. Proceeding this way, files resumed copying but when I got to the "S" selections, the consolidate process failed again. Then I selected smaller and smaller batches until the problem file was identified. Removed it from my library and then Consolidate worked fine through the rest of the library. Problem solved.
I spent several days working through this; hope I can save someone else the time.

ITunes won't let me move files to new hard drive

Similar Messages

Maybe you are looking for