ITunes won't start after update and restore

I have update iTunes to the latest version yesterday. Up to her everything is fine. Due to ther issues I had to go back to the Windows RESTORE point previous to the iTune installation.
When I start iTunes I get the following pop-up: "iTunes cannot runbecause some of its required files are missing. Please reinstall iTunes".
I do that and when iTunes try to connect to the store it shows broken links and the whole thing hangs.
I have tried to unistall iTunes, but it does not help at all. This means that I do not have connection to iPod. I cannot believe that I have to re-install all my PC bcause of this

I have update iTunes to the latest version yesterday.
Up to her everything is fine. Due to ther issues I
had to go back to the Windows RESTORE point previous
to the iTune installation.
When I start iTunes I get the following pop-up:
"iTunes cannot runbecause some of its required files
are missing. Please reinstall iTunes".
I do that and when iTunes try to connect to the store
it shows broken links and the whole thing hangs.
I have tried to unistall iTunes, but it does not help
at all. This means that I do not have connection to
iPod. I cannot believe that I have to re-install all
my PC bcause of this.
I have discovered that QuickTime is corrupted. I cannot unistall it and if I try to re-install it nothing happens.
Is there a manual way of removing it from the system?
Which keys/modules do I need to remove?

Similar Messages

  • Itunes won't start after update to 11.1

    after updating to version 11.1, iTunes won't start anymore.
    Below the problem signature (dutch).
    Any suggestions to solve this?
    Probleemhandtekening:
    Gebeurtenisnaam van probleem: BEX
    Naam van de toepassing: iTunes.exe
    Versie van toepassing: 11.1.0.126
    Tijdstempel van toepassing: 52394b24
    Naam van foutmodule: StackHash_0a9e
    Versie van foutmodule: 0.0.0.0
    Tijdstempel van foutmodule: 00000000
    Uitzonderingsmarge: 00000000
    Uitzonderingscode: c0000005
    Uitzonderingsgegevens: 00000008
    Versie van besturingssysteem: 6.1.7601.2.1.0.256.4
    Landinstelling-id: 1043
    Aanvullende informatie 1: 0a9e
    Aanvullende informatie 2: 0a9e372d3b4ad19135b953a78882e789
    Aanvullende informatie 3: 0a9e
    Aanvullende informatie 4: 0a9e372d3b4ad19135b953a78882e789
    Lees de onlineprivacyverklaring:

    After updating to OSX 10.9.3, my iTunes won't open. If I try to drag it to trash, I get the message "iTunes can't be modified or deleted because it is required by OS X".

  • ITunes won't start after reinstalls and iPhone problems

    last time I think I clicked Never Register on iTunes after plugging my iphone,downloaded some podcasts to my phone,everything seems alright before that,but then my iphone won't sync properly with itunes...
    iTunes keeps saying Syncing Iphone (sometimes it stops,but it doesnt say Sync is complete,on the left side it's still syncing) but after a while my iPhone goes back to its normal state (Slide to unlock,not to cancel) after I cancelled a sync (it took more than 2 hours,that's why I cancelled it,after the cancellation it became even more messed up)...
    Deleted the podcasts and deauthorized iTunes store,still doesnt work.
    What's the solution to sync my iphone normally again??
    I did reboot on both my iphone and PC and they don't work,
    I'm using Vista 32bit and Iphone 3G 2.2.1
    I tried updating iTunes to 8,1,now everytime I connect my phone via usb,iTunes will crash....removed iTunes and installed previous versions including 8.01 and 8.02...still not working
    after I installed 8.0,iTunes won't even open...
    removed itunes and installed other versions including 8.1 again,they won't even open even after I completely removed iTunes & quicktime and used windows install cleanup...,reboot many times,deleted Temp folder....still doesnt work...
    but the Itunes and iTunes helper processes are there on the task manager,I cant even kill them
    sorry,I don't know where to post this...
    please help,guys..
    thanks

    I have update iTunes to the latest version yesterday.
    Up to her everything is fine. Due to ther issues I
    had to go back to the Windows RESTORE point previous
    to the iTune installation.
    When I start iTunes I get the following pop-up:
    "iTunes cannot runbecause some of its required files
    are missing. Please reinstall iTunes".
    I do that and when iTunes try to connect to the store
    it shows broken links and the whole thing hangs.
    I have tried to unistall iTunes, but it does not help
    at all. This means that I do not have connection to
    iPod. I cannot believe that I have to re-install all
    my PC bcause of this.
    I have discovered that QuickTime is corrupted. I cannot unistall it and if I try to re-install it nothing happens.
    Is there a manual way of removing it from the system?
    Which keys/modules do I need to remove?

  • ITunes won't start after update

    Hi,
    I just upgraded my ITunes using the normal Apple update process when I was prompted - and now I-Tunes won't start at all.
    I can see the ITunes.exe start in Windows Task Manager....then it just shuts down again.
    Any ideas ?

    I tried another solution :
    1. Un-install I-Tunes
    2. In-install Bonjour
    3. Reboot
    4. Install latest I-Tunes
    This seems to have fixed the problem.
    So it looks like BONJOUR IS THE PROBLEM.

  • VMs won't start after updates and reboot.

    I need some help.
    I installed the November 2014 MS updates last night. I installed them on my lab Hyper-V box. The Hyper-V box is joined to a domain but is not a domain controller. It is Server 2012R2 with Hyper-V with all previous patches applied. I had two VMs configured
    on the box. The VMs were a 2012R2 server and a Windows 8.1 box. Both were running fine. In fact I shut them down before I did the Microsoft Updates on the server.
    The issue I describe below was not present until I did the updates and rebooted. The server and the associated VMs had been running fine for months. These updates are the ones that my SUS server provided to this server.
    After I rebooted the server I could not restart either VM. I kept getting the same error that is listed below. I tried DELETING the VM from Hyper-V manager and then building a new VM and using the old vhdx. Again NO LUCK. I even tried CREATING a new VM and
    I got the same problem.
    (Additional Note: I appeared as though I was able to delete the VM from Hyper-V Manager. Hyper-V Manager displayed 'Destroying....' for some period of time and then the VM was removed from Hyper-V Manager. However, recreating the VM did not solve the problem.) 
    Each time I get the following error displayed on screen.
    'Unnamed VM' could not intiialize.
    An attempt to read or update virtual machine configuration failed
    'Unnamed VM' could not initialize (Virtual Machine ID)
    'Unnamed VM' could not read or update virtual machine configuration: Ran out of memory (0x8007000E) Virtual machine ID B9xxxxxxxxxxxx 
    =======================
    I adjusted permissions on the C:\ProgramData\Microsoft\Windows\Hyper-V folder. Opened it up to "Authenticated Users" based on a couple of TechNet articles that I found. NO luck
    In the Hyper-V Config log I get the following entry,
    The configuration store at'' is not accessible Unspecified error(0x80004005)
    ==========================
    I also had these errors in the Windows Application log.
    ID=1000 Source=Application Error Type=1 Message=Faulting application name: vmwp.exe, version: 6.3.9600.17334, time stamp: 0x5407c751
    Faulting module name: vsconfig.dll, version: 6.3.9600.16384, time stamp: 0x5215db66Exception code: 0xc0000194
    Fault offset: 0x000000000001966c
    Faulting process id: 0xb84
    Faulting application start time: 0x01cffe274d55ea6b
    Faulting application path: C:\Windows\System32\vmwp.exe
    Faulting module path: C:\Windows\System32\vsconfig.dll
    Report Id: d4210450-6a1a-11e4-80d6-0019b9eed814
    Faulting package full name:
    Faulting package-relative application ID:

    OK,,so I solved this issue by removing the Hyper-V role and then readding the role. The permissions of C:\Programdata\Microsoft\Windows\Hyper-V
    and C:\Users\Public\Documents\Hyper-V definetly changed
    as a result of re-adding the role. 
    All required updates (as supplied by WSUS) are applied also.

  • ITunes won't open after update; MacBook Pro, Mac OSX 10.6.8, iTunes version 11.1.5

    iTunes won't open after update - help, please; MacBook Pro, Mac OSX 10.6.8, iTunes version 11.1.5.

    i had a problem similar to yours and better yet, i have the fix for it. i downloaded maverick 4 months ago and was without itunes ever since. all itunes icon did was bounce. itunes would never open and whats more, is when i would try to update it, i would get a "thank you for downloading itunes!" page , but the download would never work. so i scoured the net for solves. nothing that worked. <4 months later> then last night i took a new approach. i decided even though maverick would not allow me to uninstall itunes, i would find a way to uninstall itunes. then i would reinstall back to 11.1.5 i was successful and heres what i did.
    step one-
    Back up your iTunes Library.itl file, found under ~/Music/iTunes
    (even tho i didnt, i only had 3 artists in there at the time. and they didnt get erased but i advise you back up just in case.)
    step two-
    download itunes 10.7 from apple. i used this link Download it from Apple here
    (i pulled the link from Aarons website (awesometast.com). you download 10.7 however you want but i used the link above and have had no issues).
    although im not sure you need to do this step ( you may be able to download 11.1.5 itunes without 10.7, i did because i was following intructions from http://awesometoast.com/downgrading-to-itunes-10-7-from-itunes-11-on-osx/
    step 3-
    open Terminal
    step 4-
    enter in these 3 commands hitting return after each line. 1st line nothing seems to happen, 2nd line nothing seems to happen and 3rd line gives you a warning and requires password to continue. when i did it, my password didnt appear as i entered it and i hit return without looking, so i entered it in again, although im not sure i had to the 2nd time.
    killall iTunes
    killall "iTunes Helper"
    sudo rm -rf /Applications/iTunes.app/
    step 5-
    drag off and dump the itunes icon (which now has the ? shadow in it) off your dock.
    step 6-
    install 10.7 itunes you downloaded earlier. (not sure if this part is neccesary. you may be able to just download 11.1.5 but i downloaded 10.7 because i was following Aarons steps.) itunes now works.
    step 7-
    go to apple and update to 11.1.5 itunes. install it. open it and you have itunes 11.1.5 in perfect working order. assuming you have a decent internet speed for the downloads, the whole process takes very little time.
    with those steps above, you can solve itunes just bouncing and not launching issues and also the "thank you for downloading" and nothing downloads issue. enjoy. also i would like to give a shout out to http://awesometoast.com and thank Aaron for the knowledge that enabled me to get itunes back into my life.

  • Firefox won't start after update - nothing in support pages helps

    windows 7 - firefox won't start after update - no support pages are relevant

    -> [[Firefox will not start]]
    Check and tell if its working.

  • HT4972 After update and restore i am getting a message like ,Your iphone could not be activated because the activation server is temporarily unavailable.also i am getting no service message

    After update and restore i am getting a message like ,Your iphone could not be activated because the activation server is temporarily unavailable.also i am getting no service message and also connected to wifi

    mine is and before what the other guy wrote, it said your iphone could not be activated because we could not reach the server

  • ITunes 10.5 won't open after update and System Restore

    I upgraded to iTunes 10.5 days ago on my laptop running Windows Vista 32bit.
    Download and install went ok. Tried to open iTunes it just won't load.
    I click on the iTunes icon from the start menu or the desktop and only the "circle" signifying "wait" pops up for a few seconds then it goes away.
    iTunes.exe shows up in Windows Task Manager for a few seconds, then disappears.
    There is no error message or pop-up during any of this. 
    Quciktime Player and Quicktime both work though.
    I had to do a System Restore for my laptop recently because it would not boot up correctly. It kept saying "loading" but never actually load, so I took out the battery and had to system restore it.
    Please help and thanks so very much in advance!

    iFOUND the Solution!!!
    Go to Add/Remove Programs under Control Panel and for every program that is Apple - iTunes - Quicktime related RIGHT click on it and choose "Repair" and repair it. May take some time for each program.
    Then, I got an error message saying:
    "the file "itunes library.itl" cannot be read because it was created by a newer version of itunes."
    Here, from the Start Menu, search "Apple Software Update" and update every program it says needs updating. I recently this week updated Quicktime to its latest version, but did so anyway. So I updated Quicktime and iTunes...restarted computer...and it worked.
    That's how you do it. iTunes 10.5 works fine now. Hope it does equally well for you.

  • TS3694 my iphone wont get out of recovery mode? ive been having service problems " the phone would say searching for numerous hours of the day" i connected to itunes and started to update and restore the phone  now it will not restore

    The Iphone will not get out of recoverymode

    Google is your friend.
    http://support.apple.com/kb/ts3694#error3004
    Network connection or download errors
    Error 1479: This error occurs when trying to contact Apple for an update or restore.
    Quit iTunes
    Disconnect from USB and restart the iOS device.
    Reconnect the device to the computer.
    Launch iTunes and attempt to update or restore again.
    Error 1639: Follow these steps.Errors 3000-3999 (3004, 3013, 3018, 3164, 3194, and so on): Error codes in the 3000 range generally mean that iTunes can't contact the update server (gs.apple.com) on ports 80 or 443.
    Update to the latest version of iTunes.
    Verify the computer's date and time are accurate.
    Check that your security or firewall software isn't interfering with ports 80 or 443 or with the server gs.apple.com.
    Follow these steps to troubleshoot security software. Often, uninstalling third-party security software will resolve these errors.
    An entry in your hosts file may be redirecting requests to gs.apple.com (go to "Unable to contact the iOS software update server gs.apple.com" above).
    Internet proxy settings can cause this issue. If you're using a proxy, try again without using a proxy.
    Test restoring while connected to a known-good network.
    Error 3002: If you experience this error while updating an iPod touch (2nd generation) or iPhone 3G, please use the standard update or restore process in iTunes (click Update or Restore).Error 3194: You may not have the latest version of iTunes installed. Update to the latest version of iTunes. If the issue persists, follow the steps above in "Unable to contact the iOS software update server gs.apple.com."Error 3004: If you're using a Mac, you may be able to resolve an error 3004 by quitting iTunes and using the following command in the command line: dscacheutil -flushcache.The device couldn't be restored. An internal error occurred or Error 3200: This indicates a network-connectivity or traffic issue. If you see this error, wait an hour or more and try again.Error 9807: Verify the computer's date and time.If unresolved, open access to the following VeriSign servers:
    evintl-ocsp.verisign.com
    evsecure-ocsp.verisign.com
    Access to these servers may be blocked by security software, content filtering software, a misconfigured router, or anti-spyware software. For iTunes for Windows, follow these steps to troubleshoot security software issues.
    Error 9808 (or -9808): Follow the steps for an unknown alert message when connecting to resolve the issue. If those steps don't resolve the issue, or if the settings revert to their original values after the restart, then follow the steps to troubleshoot security software issues.
    Error 9844: This is typically caused by incorrect firewall settings. Go to "Open the proper ports and allow access to Apple servers" in the "Advanced steps" section below.

  • Firefox won't start after download and update

    I have win 7. I uninstalled Firefox and downloaded it again.
    The icon appears but the program won't start. I am so used to Firefox and don't want to use IE.
    I get a few messages:
    XML Parsing Error: undefined entity
    Location: chrome://mozapps/content/extensions/update.xul
    Line Number 14, Column 1:
    <wizard <="" ^="" id="updateWizard" p=""></wizard>
    I also get a message:
    "There is no disk in the drive-insert a disk into drive/device/hard disk4/dr4
    I uninstalled Firefox several times , still no luck
    I hope you can help me resolve this problem.
    Dkmc7

    Well I use system restore to an earlier date in May.
    Then I uninstalled all Mozilla files and then I reinstalled Mozilla 29.0.1 and
    now my Firefox Mozilla is working fine with all info in my profile intact.
    Thank you

  • Itunes won't open after update to 11

    I've been running Itunes 10 on my macbook pro (Snow Leopard) until today when I updated to 11.  The update appeared to complete successfully (no error messages).  But afterwards when I try to open iTunes it immediately exits (with no user-facing message) and Console shows a message like this:
    12/3/13 1:36:23 PM com.apple.launchd.peruser.501[143] com.apple.console ([0x0-0xdd0dd].com.apple.iTunes[1045]) Exited with exit code: 1
    Some troubleshooting steps I've already tried:
    Same thing happens if I try to start itunes in "safe mode".
    Same thing happens if I try to start itunes from a different user account.
    I've repaired permissions.
    I've restarted a few times since installing Itunes and since repairing permissions.
    Quicktime starts fine.
    I'm not particularly interested in version 11 features, I'd be happy to have version 10 back -- or a working version 11.
    But what I really really don't want is to lose any library information, playlists, play counts, ratings, etc.  I want to be quite careful not to lose any of those. 
    One thing that looks suspicious to me is that it looks like in some way version 10 is still installed.  At the end of the install, installd wrote both of these lines to the log in the same second:
    12/3/13 11:39:10 AM installd[6928] install Installed "iTunes" (11.1.3)
    12/3/13 11:39:10 AM installd[6928] install Installed "iTunes" (10.6.3)
    Also if I open Software Update, under "Installed Software" it also shows both versions:
    Thanks!

    After updating to OSX 10.9.3, my iTunes won't open. If I try to drag it to trash, I get the message "iTunes can't be modified or deleted because it is required by OS X".

  • ITunes won't let me update or restore my iPhone.

    So, I got my new iPhone 4S (16GB, Unlocked) yesterday for Boxing Day (hooray!) and since that morning, I've been trying to set it up. Before I bough it, I was using my SIM Card with another phone, and so I had to 'convert' it to MicroSIM, since that's what the iPhone supports. I had the SIM Card with me, and inserted it in my iPhone to set it up, as was required. At first try it didn't recognize it, so I took it out to check if I placed it correctly, and, after I put it back in, everything was ok. I downloaded quite a few apps and have a 'latest' backup on iTunes and iCloud. This morning (27th) I took my SIM card out, so I could transfer my contacts from the old phone. After I copied them, I tried to put it back in, but it wouldn't recognize it. After figuring out I was experiencing the infamous 'No SIM Card Installed' error as described on article TS4148, I followed the instructions. I backed it up and restored it. iTunes did its thing, downloaded the latest version of the firmware by itself, and restored the iPhone. And here is where the problem is. I was expecting the phone to read the SIM card properly this time, but it didn't. I'm not sure it downloaded the right version (5.0.1 9A406), to be honest, as I lve in Cyprus. So, here I am with this factory-default iPhone that cannot get activated because it cannot read the SIM card, and not restored to a downloaded version of the latest&correct firmware, because iTunes will also not allow me to restore it again unless I activate it, which requires a SIM card. Note that in Cyprus we have no Apple Stores.
    Thanks for your time,
    George

    An update: I tried manually entering Restore Mode with TinyUmbrella and then rstoring it from the IPSW I have downloaded, but for some reason it's not letting me because it's incompatible in some way. I've also tried using my SIM with my old phone and it won't recognize it. I guess the only thing I can do is follow deggie's suggestion and get a new MicroSIM. Thanks!

  • Ipad won't start after updating to ios 8.1.3

    My iPad was working without issue prior to updating to IOS 8.1.3 yesterday. After updating, not only would the ipad not start, it produced intermittent tones. The tone heard when device is plugged into an outlet for charging.
    I attempted to turn the device off but it would not respond. Afterwards, a reboot was attempted numerous times by holding the home and sleep buttons down simultaneously. Once the Apple logo appeared the buttons were released, the logo disappeared but the device remained dormant.
    While connected to iTunes and emitting the connection tones, periodically the splash screen would appear momentarily then turn off. I was able to swipe the screen on one of these occasions. The device worked properly until it was turned off after use at which time it would not turn on again and remains unable to turn on. It does not respond to attempts to turn it off or rebooting.
    Prior to the update I did backup the device in case something like this would occur. Since I appear to have exhausted all my options to get the device to work, I feel the only remaining option is to restore it to factory default. I would appreciate advice from anyone who may either have experienced this same issue and found a resolution, or can provide thoughts on how I should proceed please.
    If I proceed with a restore to factory default followed by a restore of the most recent backup, will I lose any data during this process? This will be my first time to erase a device so any thoughts would be greatly appreciated. I would, of course, prefer an alternative resolution. Thanks in advance for your help.
    tony

    Hello, Tony.  
    Thank you for visiting Apple Support Communities.  
    I understand that your iPad no long starts after an update and you have a backup for your iPad.  It sounds like you will need to restore the device to factory and then will have the option to access your backup after the restore complete.  The only information that should be missing would be after the backup was completed until the device is restored.  I have included the steps for going through this process in the articles below.    
    If you can't update or restore your iPhone, iPad, or iPod touch
    Back up and restore your iPhone, iPad, or iPod touch using iCloud or iTunes
    -Jason H.  

  • Xbmc-standalone won't start after update

    I updated and now xbmc service won't start. When i run startx on my admin user, I can get xbmc to start up, but it won't start as 'xbmc' anymore. When I `su xbmc` and try to run `startx` or `xbmc-standalone` I get the same error. Not sure what's going on.
    orwell% sudo systemctl status xbmc -l
    xbmc.service - Starts instance of XBMC using xinit
    Loaded: loaded (/usr/lib/systemd/system/xbmc.service; enabled)
    Active: inactive (dead) since Mon 2014-03-03 19:00:23 PST; 3s ago
    Process: 2012 ExecStart=/usr/bin/xinit /usr/bin/dbus-launch /usr/bin/xbmc-standalone -l /run/lirc/lircd -- :0 -nolisten tcp (code=exited, status=0/SUCCESS)
    Main PID: 2012 (code=exited, status=0/SUCCESS)
    Mar 03 19:00:20 orwell xinit[2012]: Initializing built-in extension DRI2
    Mar 03 19:00:20 orwell xinit[2012]: Loading extension GLX
    Mar 03 19:00:20 orwell xinit[2012]: (II) [KMS] Kernel modesetting enabled.
    Mar 03 19:00:21 orwell xinit[2012]: ERROR: Unable to create application. Exiting
    Mar 03 19:00:21 orwell xinit[2012]: ERROR: Unable to create application. Exiting
    Mar 03 19:00:22 orwell xinit[2012]: ERROR: Unable to create application. Exiting
    Mar 03 19:00:22 orwell xinit[2012]: XBMC has exited uncleanly 3 times in the last 1 seconds.
    Mar 03 19:00:22 orwell xinit[2012]: Something is probably wrong
    Mar 03 19:00:22 orwell xinit[2012]: /usr/bin/xinit: connection to X server lost
    Mar 03 19:00:22 orwell xinit[2012]: waiting for X server to shut down (EE) Server terminated successfully (0). Closing log file.
    I've looked through : https://bbs.archlinux.org/viewtopic.php?id=177770 and it seems to be a similar issue.
    Last edited by eyeemaye (2014-03-05 03:45:13)

    After today's update (version 12.3-11), I get a new error. For the record I've changed PAMName from 'login' to 'su' for debugging purposes.
    xbmc.service - Starts instance of XBMC using xinit
    Loaded: loaded (/usr/lib/systemd/system/xbmc.service; enabled)
    Active: inactive (dead) since Fri 2014-03-07 20:58:52 PST; 2min 33s ago
    Process: 3381 ExecStart=/usr/bin/xinit /usr/bin/dbus-launch /usr/bin/xbmc-standalone -l /run/lirc/lircd -- :0 -nolisten tcp vt7 (code=exited, status=0/SUCCESS)
    Main PID: 3381 (code=exited, status=0/SUCCESS)
    Mar 07 20:58:51 orwell pulseaudio[3443]: [pulseaudio] module.c: Failed to load module "module-device-restore" (argument: ""): initialization failed.
    Mar 07 20:58:51 orwell xinit[3381]: ERROR: Unable to create application. Exiting
    Mar 07 20:58:51 orwell pulseaudio[3469]: [pulseaudio] module-device-restore.c: Failed to open volume database '/var/lib/xbmc/.config/pulse/739ce619b49f4eb797280beb523b50fd-device-volumes': No space left on device
    Mar 07 20:58:51 orwell pulseaudio[3469]: [pulseaudio] module.c: Failed to load module "module-device-restore" (argument: ""): initialization failed.
    Mar 07 20:58:51 orwell xinit[3381]: ERROR: Unable to create application. Exiting
    Mar 07 20:58:51 orwell xinit[3381]: XBMC has exited uncleanly 3 times in the last 1 seconds.
    Mar 07 20:58:51 orwell xinit[3381]: Something is probably wrong
    Mar 07 20:58:51 orwell xinit[3381]: /usr/bin/xinit: connection to X server lost
    Mar 07 20:58:51 orwell xinit[3381]: waiting for X server to shut down (EE) Server terminated successfully (0). Closing log file.
    Mar 07 20:58:52 orwell systemd[3382]: pam_unix(su:session): session closed for user xbmc
    Last edited by eyeemaye (2014-03-08 05:19:34)

Maybe you are looking for

  • How to create a SEQUENCE in MSSQL2005

    Hi I am also having a similar problem which opened the thread Actually i am using a Repositery which is created in MSSQL2005. Now i want to create a SEQUENCE similar to Oracle and populate My surrogate Key Column. Can u tell me how to create a SEQUEN

  • Menu bar help

    Can anyone help me!!! I seem to have messed up the menu bar of the RoboHelp for Word x5. The RoboHelp pulldown from the menu bar does appear. I have reinstalled Robohelp x5 and the updates but with no luck. PLEASE CAN SOMEONE PUT ME OUT OF MY MISERY

  • Org unit doubts

    Hi Gurus, Please could you help clarify / confirm : 1. Shipping point and Loading Point : I know the definitions but unclear about the assignment part. Am I right to say    - Shipping point is Not  Assigned to Loading Point. assignment not applicable

  • Java iView Runtime in WAD iview

    Hi experts, We are experiencing strange issue with one of WAD query iView (BI) in portal. Earlier when we launched this iview through portal, it was giving the error very rarely. But the repetation is increased and facing the issue again & again. The

  • ERROR: Abnormal termination

    Hello, Which possible the cause of the error below? 06/25/07 11:27:34 Hora padrão leste da Am. Sul]::Client Status [ConnId=0, PID=-1709033] >> ERROR: Abnormal termination, Error Code: C0000005 ACCESS_VIOLATION ======================= STACK DUMP =====