ITunes won't start after upgrade

Since I upgraded iTunes everytime I try to start it up I get the following error;
"iTunes cannot run because it has detected a problem with your audio configuration."
Anyone else having this issue?
Dave

QuickTime doesn't appear in Control Panel Add/Remove Programs so I can't remove it. I can see QuickTimePlayer.exe in C:\Program Files\QuickTime, but when opened I get the error
"Runtime Error! Program: C:\Program Files\QuickTime\QuickTimePlayer.exe
Okay, let's try swapping your QuickTime out by other means.
Download and install the Windows Installer CleanUp utility. then use it to clear any existing QuickTime installation configuration information from your PC:
Description of the Windows Installer CleanUp Utility
Next, we’ll manually remove leftover program files and folders.
1. On the Start menu, click My Computer (or double-click My Computer on the Desktop).
2. In My Computer, open Local Disk.
3. Open Program Files.
4. Right-click on the QuickTime folder and click Delete from the shortcut menu.
5. Navigate to C:\Windows\system32\.
6. Remove the files QuickTime.qts and QuicktimeVR.qtx.
7. Restart your computer.
next, we'll try to get a fresh copy of QuickTime into your PC by doing a repair install of itunes.
switch off antivirus and antispyware applications prior to the repair install.
go into Add/Remove and select itunes. click "Change" and then click "Repair".
if the repair install goes through okay, restart the PC and try launching itunes again. does it launch properly now?

Similar Messages

  • ITunes won't start after upgrading to v9 on WinXP

    I dutifully upgraded to iTunes 9, and now it won't start. It attempts to start, and I get a few moments of the hourglass icon. And the Task Manager shows the iTunes process is running. But the UI never appears. I tried deleting via the control panel and reinstalling but same problem. Never had a problem before - this is aggravating since I don't have access to my library and there doesn't seem to be a way to downgrade back to v8. I turned off (actually deinstalled) Norton but that didn't help. Tried disabling a bunch of start up processes at boot time and that didn't help either. Any ideas would be greatly appreciated!

    I had a similar issue. After doing the upgrade, tried to open iTunes & got an error message saying that I needed the latest Quicktime version and telling me to uninstall and reinstall iTunes. Doing so resulted in the same error message.
    Per a suggestion in another thread here, I repaired Quicktime (control panel- add/remove programs- Quicktime- repair). This disappeared iTunes but once I reinstalled it the problem went away.

  • ITunes won't start after upgrade--error message

    When I launched iTunes after upgrading to 6.0.1, I got the following message after agreeing to the usual legal terms:
    "The folder "iTunes" cannot be found or created, and is required. The default location for this folder is inside the "Music" folder."
    Any suggestions?

    Jeff,
    Thank you for the reply and your suggestions.
    Yes, I did take a look in the Music folder--and no, the file was not there. I then used Spotlight and did find an iTunes Music folder, but when I tried to copy it to the Music folder I got error message -36, saying that parts of the file weren't readable and, therefore, not copyable.
    I also used my disk utility to repair permissions and re started the computer---with the same results.
    I'm not sure what else to try and may take my computer to my local expert.
    best,
    als

  • Itunes won't start after upgrading

    I just upgraded to itunes for windows 6.0.5 and now it won't start. The windows error report box comes up. Please help!

    don't be silly, zenbeer. let's wait until the original poster tells us explicitly what message s/he's getting. there are at least two different error messages that miracon could be getting that fit the information that we've received so far.
    why on earth did you reinstall Windows in response to that error message?
    Itunes has encountered a problem and needs to close
    the first thing that i check for when people report getting that message when they try to launch their itunes is a broken QuickTime.
    try to open your QuickTime. does it launch properly, or do you get an error message?
    if you get an error message, the first thing we'll try is a careful standalone QT 7.1 reinstall.
    download and save a copy of the QT 7.1 standalone installer to your hard drive. (we'll run the install from there rather than online.) switch off antivirus and antispyware applications prior to the install.
    Quicktime 7.1 Standalone Installer
    if that install goes through okay, does your itunes launch properly again?
    (if you get an error message on the QT standalone reinstall, let us know what it says. include error message numbers if you're getting any.)

  • Itunes won´t start after upgrading to the latest version....

    Hello everyone. After updating to the latest version of itunes it won´t start.I get the message itunes will be shut down due to the data execution prevention. After i followed the troubleshooting guide from windows to shut down the dep for itunes i get the message: This program cannot run without dep. pls help

    Quicktime doesn´t work properly. The program will be shut down. You´ll be noticed when a solution is available
    Many thanks.
    That and the iTunes DEP error suggest that some application (other than QuickTime itself) has stashed old QuickTime componentry down in your system files.
    So we'll go looking for the older QuickTime componentry in the most common locations for it to be stashed.
    First we'll need to change some view settings.
    In your Start menu, open Computer.
    In your Organise menu, select Folder Options.
    In the View tab, make sure that "Show hidden files and folders" is selected, and Hide extensions for known file types is unchecked.
    Click OK.
    Now in Computer, open your C:\ drive (or whichever drive you have your operating system installed on).
    Open the "Windows" folder.
    *If you have a 32-bit version of Windows,* open the "System32" folder.
    *If you have a 64-bit version of Windows,* open the "SysWOW64" folder.
    What files and folders can you see in there with QuickTime in the title? (In a standard installation of Quicktime you should be seeing precisely two files ... QuickTime.qts and QuickTimeVR.qtx ... and no QuickTime folders whatsoever.)

  • ITunes won't start after upgrade-HELP!

    I tried upgrading to the latest iTunes on my windows xp and nothing seemed to go wrong. everything installed correctly. Quicktime opens and operates perfectly, but iTunes will not open at all!
    I have tried various different uninstall-reinstall combinations, including older versions. nothing works at this point!
    HELP!

    Same thing has happened to me apart from my itunes has been wiped from the computer, the only thing you can do is reset your computer to a a few days before you tried to upgrade. your itunes will come back on plus all your music but you can't upgrade to 7.7 or it will disappear again. Very annoying and time consuming, Apple need to sort this out.

  • Im having major problems syncing my iphone 4 to itunes, this problem started after upgrading to ios 5. I have upgraded my itunes, turned sync by wifi on and off but still nothing. Everytime I try to sync my iphone it just says sync cancelled. Please help!

    Im having major problems syncing my iphone 4 to itunes, this problem started after upgrading to ios 5. I have upgraded my itunes, turned sync by wifi on and off but still nothing. Everytime I try to sync my iphone it just says sync cancelled. Please help.....

    I'm having the same problem ! Each time the sync starts it suddenly stops and says finished syncing

  • IPhoto won't start after upgrade 1.1 for my new iMac. Now what do I do?

    Had to upgrade according to screen.  iPhoto won't start after upgrade 1.1 for my new iMac. Now what do I do?
    I have restarted the computer. Brand new iMac intel. v 10.9.4

    You need to upgrade iPhoto for Mavericks. Download the upgrade using App Store.

  • ITunes won't open after upgrading to 11

    My girlfriend's iPad mini is disabled, so I'm trying to connect it to her old macbook (10.6.8), the one which it is associated with.  Upon plugging in the iPad, I was prompted to update iTunes, because the iPad is running iOS 7 and needs the latest version of iTunes.  I said ok, and iTunes upgraded to 11.
    Now, iTunes will not start.  When i click on the icon, it bounces once and then nothing else happens.  I've tried restarting, creating new accounts, and deleting all the com.apple.itunes preference files, but it's not working.  What the ****?  I can't undisable the iPad because iTunes won't start.  How do I fix this?

    After updating to OSX 10.9.3, my iTunes won't open. If I try to drag it to trash, I get the message "iTunes can't be modified or deleted because it is required by OS X".

  • Itunes won't work after upgrading to Mac os x 10.7

    How can i fix itunes, it won't open after upgrading to Mac OX lion??

    Downloaded and reinstalled. Still crashed instantly after trying to open or create a document. Below, from Crash Report:
    Exception Type: EXCBADACCESS (SIGBUS)
    Exception Codes: KERNPROTECTIONFAILURE at 0x0000000000000044
    Crashed Thread: 7
    Thread 7 crashed with X86 Thread State (32-bit):
    eax: 0xb0427d48 ebx: 0xb0427c38 ecx: 0xb0427b38 edx: 0xb0427b3c
    edi: 0x00000009 esi: 0x00000000 ebp: 0xb0427b18 esp: 0xb0427ae0
    ss: 0x0000001f efl: 0x00010283 eip: 0x94bc9f4b cs: 0x00000017
    ds: 0x0000001f es: 0x0000001f fs: 0x0000001f gs: 0x00000037
    cr2: 0x00000044
    Will attempt your suggestion.

  • Itunes won't start after update to 11.1

    after updating to version 11.1, iTunes won't start anymore.
    Below the problem signature (dutch).
    Any suggestions to solve this?
    Probleemhandtekening:
    Gebeurtenisnaam van probleem: BEX
    Naam van de toepassing: iTunes.exe
    Versie van toepassing: 11.1.0.126
    Tijdstempel van toepassing: 52394b24
    Naam van foutmodule: StackHash_0a9e
    Versie van foutmodule: 0.0.0.0
    Tijdstempel van foutmodule: 00000000
    Uitzonderingsmarge: 00000000
    Uitzonderingscode: c0000005
    Uitzonderingsgegevens: 00000008
    Versie van besturingssysteem: 6.1.7601.2.1.0.256.4
    Landinstelling-id: 1043
    Aanvullende informatie 1: 0a9e
    Aanvullende informatie 2: 0a9e372d3b4ad19135b953a78882e789
    Aanvullende informatie 3: 0a9e
    Aanvullende informatie 4: 0a9e372d3b4ad19135b953a78882e789
    Lees de onlineprivacyverklaring:

    After updating to OSX 10.9.3, my iTunes won't open. If I try to drag it to trash, I get the message "iTunes can't be modified or deleted because it is required by OS X".

  • ITunes won't open after upgrade. Help!!!!

    I upgraded to 7.0.2 and now my iTunes won't open at all. No error message. Nothing. When I click on it, it seems like something is happening with hourglass thing going but nothing happens. No error message.....no nothing.
    I looked under Processes in my Task Managaer and I see iTunes.exe, iTunesHelper.exe and iPodService.exe but I don't know whats going on.
    Pleeeeeeeease heeeeeeeeeelp.
    I love my iPod too much for it to be out of commission.

    replying to DanteSpyke
    It's 2006
    okay. it's way rarer to get this sort of thing due to NIS 2006 than it is with 2005, but it has been known to happen.
    try the technique from the following bbecker post. (heads-up ... it's taking a long time for that post in that thread to load for properly for some folks. so leave it to think for a few minutes until it's loaded fully, otherwise you might not see the correct post.)
    bbecker1221: Re: Itunes doesn't start up after installing upgrade :SOLUTION

  • ITunes won't sync (after "upgrading" to Lion because my four year old macBook can't use Mtn. Lion) With a little ranting sprinkled in.

    I hope someone out there has the expertise to tell me what I am doing wrong. I expect a learning curve from a new Mac operating system, but I don't expect weeks of problem solving and glitches. Lion...well, they won't let me use that word. 
    Since I "upgraded" to Lion, when I hit "sync" in iTunes on the computer, I get one of three things:  1. Nothing happens, or:  2. A message appears that there is not sufficient room on the Nano for the changes, which is not true, or:  3. It syncs down to next to nothing on the Nano and I have to hit revert.
    Sometimes I'm confronted with a screen that wants me to check or uncheck each and every album (but not songs) that I want synced. I have already kept up to date a more specific and complete list of the same sort elsewhere in iTunes: the "Music" list in my itunes "Library." Today I unchecked some songs and checked some others expecting to easily have the corresponding changes made on my iPod, as I have for years.  This is the list that I have refined over the years based on new music acquired, my changing tastes, and room left on the iPod.  Am I really expected to duplicate this process on another list only to end up with no options for individual songs I do, or do not, want synced? What is the purpose of this exercise?
    I finally got it to upgrade to iTunes 10.6.3.  I was repeatedly getting a message in iTunes that there was an upgrade available. I would hit upgrade within that mesage in iTunes.  It would go through the process of checking for new software and then tell me my software was up to date. (I was running iTunes 10.6 (40).) Software update also told me my software was up to date. I had to go to the Apple site to find and download and install iTunes 10.6.3. The change made no difference to the above problem. I'm not used to screw-ups like this from Apple.
    I can't think of a single change in Lion that I like. Not one. I hate the new calendar. I hate the new Safari, and I hate the new Mail. I hate the combination of Google search and the address bar.  I hate the way hiting a hot link in Mail opens a new tab in Safari instead of a new window. And the number of hassles and fixes and problems to be solved in the move from Snow Leopard to Lion has been like nothing I have experienced before on a Mac.
    An iMac and a laptop are not iOS devices. And iPads and iPhones are not laptops or desktops. To try to merge the operating systems is a major error in my opinion. Thanks for putting up with my rant. I never expected to be so frustrated by a Mac "upgrade."  And I've been using Macs a log time. Any advise would be apreaciated.
    "Shinwell Johnson"

    In lieu of relaxing on Sunday, I've been working on this. 
    I tried launching Thunderbird (TB) in TB's "Safe Mode".  This launches TB like it's being used for the first time - and it didn't crash, which got me hopeful.
    So I deleted the TB profile folder and the TB preference file from the ~/Library folder.  Then I manually copied them over from my old Mac to my new Mac - figuring that maybe something got damaged by Migration Assistant.  After I installed all of the TB files and folders into the right places in my ~/Library folder, I rebooted the Mac (just to be safe) and tried to launch TB - and it crashed upon launching, with essentially the same crash log as shown above.
    So it looks like there is something in my TB Profile that Lion doesn't like (but that Snow Leopard was fine with). 
    Any suggestions for how to find and fix/remove the offending item?  Is there something I could search for in the crash log that would point me to the offending item?

  • ITunes won't start after reinstalls and iPhone problems

    last time I think I clicked Never Register on iTunes after plugging my iphone,downloaded some podcasts to my phone,everything seems alright before that,but then my iphone won't sync properly with itunes...
    iTunes keeps saying Syncing Iphone (sometimes it stops,but it doesnt say Sync is complete,on the left side it's still syncing) but after a while my iPhone goes back to its normal state (Slide to unlock,not to cancel) after I cancelled a sync (it took more than 2 hours,that's why I cancelled it,after the cancellation it became even more messed up)...
    Deleted the podcasts and deauthorized iTunes store,still doesnt work.
    What's the solution to sync my iphone normally again??
    I did reboot on both my iphone and PC and they don't work,
    I'm using Vista 32bit and Iphone 3G 2.2.1
    I tried updating iTunes to 8,1,now everytime I connect my phone via usb,iTunes will crash....removed iTunes and installed previous versions including 8.01 and 8.02...still not working
    after I installed 8.0,iTunes won't even open...
    removed itunes and installed other versions including 8.1 again,they won't even open even after I completely removed iTunes & quicktime and used windows install cleanup...,reboot many times,deleted Temp folder....still doesnt work...
    but the Itunes and iTunes helper processes are there on the task manager,I cant even kill them
    sorry,I don't know where to post this...
    please help,guys..
    thanks

    I have update iTunes to the latest version yesterday.
    Up to her everything is fine. Due to ther issues I
    had to go back to the Windows RESTORE point previous
    to the iTune installation.
    When I start iTunes I get the following pop-up:
    "iTunes cannot runbecause some of its required files
    are missing. Please reinstall iTunes".
    I do that and when iTunes try to connect to the store
    it shows broken links and the whole thing hangs.
    I have tried to unistall iTunes, but it does not help
    at all. This means that I do not have connection to
    iPod. I cannot believe that I have to re-install all
    my PC bcause of this.
    I have discovered that QuickTime is corrupted. I cannot unistall it and if I try to re-install it nothing happens.
    Is there a manual way of removing it from the system?
    Which keys/modules do I need to remove?

  • FireFox won't start after upgrading

    This morning I upgraded to FireFox 5.0, when it was done installing the upgrade the last window had the option to start FireFox on completion, I left this option checked but after clicking the "Finish" button nothing happened so I clicked the new FF icon on my desktop. Still nothing. I opened Task Manager and nothing was listed on the "Applications" tab but when I clicked on the "Processes" tab there were several instances of FF running so I selected each one and clicked the "End Process" button which worked to exit all but one of them. No matter what I tried it would not terminate that one instance of FF so I shut down the computer. After firing up the computer I tried re-running the FF install app but it kept telling me that I had to exit FF before it could run, I looked in Windows Task Manager again and there was FF listed under "Processes". I restarted the computer to get rid of the running FF and then downloaded the FF file again, but am getting the same results. It just won't start (and it won't even give an error message)! I surfed the Web and found info stating that you could SHIFT click the FF icon to open it in Safe Mode, but that didn't happen either. Any ideas????

    it does not work even in windows safe mode with networking. same issue. if i wait for some time firefox comes but in not responding mode. then a pop shows up with - script: chrome//browser/content/tabbrowser.xml 2123 .

Maybe you are looking for

  • Problem with Web-Fonts displayed on Windows PCs?

    Hi, I am creating my first site with Muse, and am having problems getting the web-fonts to display correctly on Windows computers. This happens with both Chrome and IE, however you can see the rendering is much worse in IE. On my Mac (that I'm creati

  • Elements 10. Windows 7. Alastair Omand

    With Elements open the screen shows - 5138 items/18 not shown (I have no idea why). Click Edit/Preferences/Backup Synch - response, ERROR IN OPENING. Click Backup Synch Key (at bottom of screen) FILES shows 27 albums (there are 28). Click Not Backed

  • Problem Multilanguage in BPM workflow

    Hi all, I want to change default language in BPM workflow when login to BPM workspace (ex: Vietnamese ...) and change properties default of Task, BPM supports multilanguage? Does somebody know how can i do it ? Thanks.

  • Keep getting a pop up for download mac sercurity, what do i do?

    Need some help

  • Master page mapping & two-level running headers

    Using running headers for two or more levels is probably an age-old problem both in Framemaker and Word. I wonder if anyone has a solution that works with master page mapping. To elaborate a bit, I have a number of documents with a typical chapter st