Itunes wont install always get the same messege

Tried to install itunes on my new computer that i bought. Downloaded the Installer and when i try to install It comes up with the messege "There is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your support personnel or package vendor.
Any Suggestions? Ive removed it. downloaded it again. and still nothing. updated the computer.

Problem has been fixed. Turns out it was a Windows issue not itunes. thanks

Similar Messages

  • I have an older Macbook with OS/X. Tried to download iTunes 10 a few times now, but when installing I always get the same error message: Run Preinstall Script for Apple Mobile Device Support. What can I do to finalise the installation?

    I have an older Macbook with OS/X. Tried to download iTunes 10 a few times now, but when installing I always get the same error message: Run Preinstall Script for Apple Mobile Device Support. What can I do to finalise the installation?

    Thanks. Short of the sort of "generic" suggestions of restaring your system, if you haven't, and repairing disk permissions and verifying the disk, I don't have any advice right now. I'll do some research and see if I can come across anything. Meanwhile, someone else may have an idea.
    Regards.

  • Getting error messege i tunes was not installed properly. you may not be able to import  cd .  please reinstall itunes.  i have done this several times and i still get the same messege

    i have taken itunes completely off my computer and redownloaded it several times and keep getting the same messege and not i am getting a messege that itunes needs a repair and i click yes for the repair and nothing happens,

    Could you post your diagnostics for us please?
    In iTunes, go "Help > Run Diagnostics". Uncheck the boxes other than DVD/CD tests, as per the following screenshot:
    ... and click "Next".
    When you get through to the final screen:
    ... click the "Copy to Clipboard" button and paste the diagnostics into a reply here. (Use your Ctrl-V keyboard shortcut to paste.)

  • I can't Start, Uninstall or Install new iTunes. I'm getting the same error message: Window Installer Service could not be accessed.  No other programs have similar problem. Any suggestion what can be done?

    I can't Start, Uninstall of Install new iTunes. I'm getting the same error message: "Window Installer Service could not be accessed". No other programs having similar problem. Any suggestions how to fix it?

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) (not for XP) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
    Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
    tt2

  • I keep getting notified that there is an update to Firefox Weather 2.0.1 but when I try to install it I always get the same "download error" -228. How do I get around this?

    I don't think additional details will help since I don't have any. I have tried repeatedly to install this update and always get the same result which I have already detailed. This is technically an Add-On but I was given no place to ask questions about it.

    See if this helps you. <br />
    https://support.mozilla.com/en-US/kb/unable+to+install+add-ons#Download_Error_228

  • TS1717 My itunes won't open - it says: 'The program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem' I have tried un-installing then re-installing itunes and I still get the same message??

    My itunes won't open - it says: 'The program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem' I have tried un-installing then re-installing itunes and I still get the same message?? Can anyone help?

    I have the exact same problem.
    I have uninstalled the program, rebooted and downloaded the update again. Same problem, same message.
    Please, where is that missing MSVCR80.dll? I don't remember misplacing it.
    I'm a Windows 7 user.

  • I Just purchased Adobe Acrobat DC, Everytime I try to install I get the same Error Code: 207?

    I Just purchased Adobe Acrobat DC, Everytime I try to install I get the same Error  We've encountered the following issues, The server is not responding currently. Please try after some time (Errors  Code: 207) I've rebooted twice, and I get the same error, any immediate solutions?  I need answer now (Disabled Vet who can't physically stay online), anyone?

    I was not aware that the Administrator account was active on Win 8.1. On Win 7 it is inactive and has to be activated to use. For activation on Win 7 I always have to look it up on the web. There are just a few steps needed, but you may indeed have the Administrator account active. For the TEMP folder, you can simply empty it (often some files do not like to delete). The cleanup can be done with various software like CCleaner. You can also just go to the Windows\TEMP folder (I think this works in Win 8.1) and delete the files and folders found there (C:\Windows\Temp). Sometimes there is a temp folder under your user account that may be used for such files and that one could be cleaned too (C:\Users\Administrator\AppData\Local\Temp). I am not sure which one Adobe uses. The issue with the temp folders is that they are limited in size as I understand it. It may be someone else has a better suggestion, but if the administrator and anti-virus suggestions did not help, this is my next recommendation.

  • HT4623 My iPad 4 will not update. I keep getting an error message. I have reset my device. Used iTunes. I still get the same message

    My I pad4 will not update. Keep getting error message. I have reset it and hooked up to iTunes . I still get the same message.

    Have you taken a look at this?
    http://support.apple.com/kb/TS3694

  • WRT54GS: without Windows, force a given MAC address to always get the same IP address via DHCP?

    I have just now set up my WRT54GS to manage my home wireless network, and it works great. I just have one question that I haven't been able to find an answer for (forgive me if I have overlooked an obvious source of information).
    I have set up the WRT54GS to be a DHCP server, and it assigns addresses in an ad hoc manner to all the devices that connect to it. In general, this is what I want, but in one case, I want a certain host to always get the same IP address, for example, 192.168.1.10.
    You should know that I have no Windows machines on my network. Everything is either running Linux, MacOSX, or Symbian (on a Nokia N95 handheld). Therefore, I can't set up a static IP for my device using the software supplied on the CD that comes with my router, as that software only runs under Windows.
    Using a different manufacturer's router, I am able to accomplish this by telling the DHCP software on that router to always assign 192.168.1.10 to the host who connects with a certain MAC address. I can then use this mechanism to force my specific host to always get this desired IP address. However, I haven't been able to find any way to do that with the WRT54GS without the software on the Windows-based CD. Is it possible at all? If I can indeed do this without that Windows software, could someone point me to some docs which explain how to accomplish this?
    ... or is there perhaps a different way to cause this to happen, perhaps by means of some sort of DHCP client ID?
    Thank you very much in advance for any pointers you can give me.
    Message Edited by HippoMan on 10-16-2007 05:27 PM
    Take a hippopotamus to lunch today.

    Forget about the CD. There is nothing on the CD which you don't configure better through the router web interface at http://192.168.1.1/ You don't need the CD. Never. I have never used the CD to configure any of my routers. The program on the CD is just a software which helps you with the initial configuration of the router. It is just a software which pretty much contacts the web interface in the background and sends some settings changes there. You can do everything yourself directly. Then you know what you change.
    You have to configure the static IP address on the computer and on the computer only, e.g. on your Mac use Static IP instead of DHCP in the network preferences. Enter the IP address you want to use for the computer, the subnet mask, gateway address and DNS server(s). That's it. The router is not involved in any of this.
    You just have to make sure that you use an IP address inside the LAN of the router. By default, Linksys routers use the IP address 192.168.1.1 on the LAN side for the the router. The subnet mask is 255.255.255.0. The IP address together with the subnet mask says that all IP addresses 192.168.1.0-255 are considered part of the LAN. Everything else is outside and needs to be routed to the router and from there into the internet. (If you want to know how the subnet mask works exactly read the wikipedia article on it or search for "subnet calculator" or similar in the internet)
    Thus, if you connect a computer to your LAN and set a static IP address on the computer it should be inside this IP address subnet/range in order to have internet and LAN access on the computer. It does not matter which address you use as long as it is inside the IP subnet. The DHCP server on the router automatically assign a correct IP address inside the IP subnet and also automatically assigns the correct gateway address (its own address = the address to which everything should be sent which does not belong into the LAN, i.e. the internet traffic) and the DNS server. With static IP you have to assign those values yourself.
    But again, there is no Windows computer or CD involved to do that nor is there any configuration on the router required to set the static IP address on the Mac. The IP address you set must simply match your LAN IP which is basically defined through the settings on the router as you want to have internet and thus need access to the router and its address 192.168.1.1.
    Some routers allow you define fixed IP addresses for specific devices in the DHCP server of the router. With that function you can set a fixed IP address on the router. The computer can remain on DHCP. It will always get the IP address you have configured in the list on the router through the DHCP server. However, your Linksys router does not have this option. If any device inside your LAN is supposed to receive the same IP address at any time you have to configure that on the device only.
    If you have not changed the default LAN IP address, subnet mask and DHCP server settings on the router, the router has 192.168.1.1, subnet mask 255.255.255.0 and the DHCP server uses 192.168.1.100-149 for dynamic assignments. To avoid potential address conflicts you should not use any static IP addresses inside the DHCP server address pool. This leaves you with IP addresses 192.168.1.2-99 and 150-254 as static IP addresses inside your LAN. You can pick any address you like as long as any device with a static IP address has a unique IP address inside your LAN.
    Assign the subnet mask 255.255.255.0 on the computer and set the default gateway to 192.168.1.1. The DNS servers are a little bit more complicated. Generally it is better and faster if you use the DNS servers of your ISP. You can, however, also use the IP address of the router 192.168.1.1 as DNS server. The router will then operate as DNS proxy, i.e. it contacts the DNS servers of your ISP for any request from your computer.
    If you want to use the DNS servers of your ISP, click on the Status tab in the router web interface. It shows you the current settings of the router on the internet port. It should show you multiple entries for DNS servers. Choose those DNS server IP addresses in the computer.
    If you don't want to go through the hassle with the direct access to the DNS servers of your ISP, simple use 192.168.1.1 as only DNS server on the computer.
    There are all settings you have to make on your Mac or other computers to assign a static IP address. As long as the IP address is inside 192.168.1.* it belongs to the LAN and has internet access through the router (as long as the default gateway address is 192.168.1.1 of course).
    Firmware is loaded either through the web interface of the router, usually somewhere on the Administration tab or with tftp. Both ways work fine on any Mac or Linux box.

  • Best I have been trying for a week to order greeting cards using iPhoto but do I always get the same statement: there has been an error occurred while connecting to Apple's online store try again

    Best I have been trying for a week to order greeting cards using iPhoto but do I always get the same statement:
    there has been an error occurred while connecting to Apple's online store try again

    Best I have been trying for a week to order greeting cards using iPhoto but do I always get the same statement:
    there has been an error occurred while connecting to Apple's online store try again

  • When opening iTunes I continue to get the same messages, 'The program can't start because AVFoundationCF.dll is missing' and 'iTunes was not installed correctly. Error 7 (Windows error 126)' I've uninstalled, reinstalled many times - nothing! help please.

    When opening iTunes on my new Windows 7 PC I continue to get the same messages, 'The program can't start because AVFoundationCF.dll is missing' and 'iTunes was not installed correctly. Error 7 (Windows error 126)' I've uninstalled and reinstalled many times to no avail, even tried it on a different user account and still nothing. I recently installed Panda Internet Security 2012 (about 12 days ago), initially iTunes worked fine as usual but within the last few days I've been  unable to open it with the same messages appearing. I've read through some of these pages and tried everything that's been advised, uninstalling and reinstalling while internet and laptop security is swithched off, downloading tools to completely remove anything related to iTunes, tried it in Safe Mode, nothing has worked. I've also noticed that in the start menu when I click on iTunes, it says '(empty)' where it should have the logo and ability to start the program, does this mean it doesn't download + install properly each time I've tried? Any help would be enormously appreciated.

    Doublechecking. Have you also tried the following user tip?
    Troubleshooting issues with iTunes for Windows updates

  • My iTunes wont launch I get the following message: This version of iTunes has not been correctly localized for this language. Please ru the English version. I click OK and nothing happens

    my itunes wont launch
    I get this message
    This version of iTunes has not been correctly localized for the language, please run the english version.
    I click OK and nothing happens

    Hi there Scottielongdrive,
    You may want to try removing and reinstalling iTunes as an initial troubleshooting step. Take a look at the article below for more information.
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    http://support.apple.com/kb/ht1923
    -Griff W.

  • I have made a 3:40 video in imovie and am trying to export it to youtube.  I have tried every export option and I always get the same message:  We are unable to export your video error code (-50).  I have 50g of space left on my hard drive.

    I have Imovie 09 and am using Snow Leopard 10.6.8

    I've tried everything, including exporting to Quicktime with the settings suggested by youtube...nothing seems to work and I keep getting the same message:  Unable to Prepare Project for Publishing.  The project could not be prepared for publishing because an error occurred. (-50)
    The original name of the project had parenthesis and I even renamed it so now its just simply "Going Nowhere"

  • HT201407 How can I activate my iPhone if both is not working in WIFI nor in iTunes? I always get the "Could not activate" message.

    I restored my old model of iPhone to factory settings successfully by following the restoration details in Apple website but soon as I press the next icon during configuration for the phone activation, I always get the "Cannot activate phone" message. Have I done anything wrong with the restoration causing this error?

    Generally this is a sign that the iPhone had previously been
    hacked/modified/jailbroken and the update relocked it to the
    original wireless carrier. If this is the case, only that wireless
    carrier can unlock your iPhone. You must contact them to see
    if they offer unlocking and if you qualify.
    What wireless carrier did you use before this problem?
    Does the app Cydia appear on your iPhone?
    What does it say when you look at Settings=>General=>About=>Carrier?
    Unauthorized modification of iOS
    http://support.apple.com/kb/HT3743 
    If your iPhone has not been jailbroken, see the troubleshooting suggestions here:http://support.apple.com/kb/TS3424?viewlocale=en_US

  • I can not get Adobe Flash Player to update on my Mac. It keeps telling me to close Safari even though it is closed. I have tried all suggestions on the Adobe site and always get the same results. Thanks for any help

    I can not get Adobe Flash Player to update on my Mac. It keeps telling me to close Safari even though it is closed. I tried every thing on Adobe's site to fix the problem with the same results always. I went to Mac's site as well and was told to go to Adobe for a solution. It worked fine since a new Mac in Feb. ,but it will not update now so no Flash Player ay all. Thanks for any help.

    [discussion moved to Installing Flash Player forum]

Maybe you are looking for