Itunes wont launch, no error message, no blue screens, just wont open

itunes wont launch, i get no error message, no blue screen, it just wont open. I've tried to delete and reinstall, but once i close itunes i still have same issue. it wont open again.

I have same problem  on my XP lap top and Windows 7 PC.    Apple have been investigating this problem for me for a week now without success so far.  Understand it 's ongoing with other customers as well.
  It is caused by an bit of program called APSDaemon supplied by Apple in latest i-Tunes.     Your quick fix to enable you to open i-Tunes again is as follows:-     open Task Manager (right click bottom toolbar), click on Task Manager, select Processes.   Find APSDaemon, highlight and press END PROCESS.      I-tunes will now re-open ok.   You have to repeat this every time you want i-Tunes re-opened until you switchoff or restart.
A pain I know, but lets you keep going until Apple repair and release an update for i-Tunes

Similar Messages

  • ITunes wont open, cant uninstall, cant upgrade, cant reinstall. please help

    recently, itunes decided not to open. no error message, no computer lockup, just not open. so when i tried to reinstall via add/remove programs, the installer opened, and acted normal, said it was validating install, then when it got to removing old program, it froze and a windowsey-looking error message popped up saying that "the feature you are trying to use is on a network resource that is unavaliable" "click ok to try again or enter an alternate path to a folder containing the installation package 'itunes.msi' in the box below" [dropdown+browse button]. the dropdown lists 2 file paths one being in the temp files in mydox and the other being in some application cache files in some system folder. neither works.
    please help! im stuck! i have tried uninstalling, reinstalling, repairing, downloading the most recent and trying to install that, and even downloading an older version, and i all get the same error message.

    a windowsey-looking error message popped up saying that "the feature you are trying to use is on a network resource that is unavaliable" "click ok to try again or enter an alternate path to a folder containing the installation package 'itunes.msi' in the box below" [dropdown+browse button]. the dropdown lists 2 file paths one being in the temp files in mydox and the other being in some application cache files in some system folder. neither works.
    with those symptoms, let's try the following procedure.
    first, head into your Add/Remove programs and uninstall your QuickTime. if it goes, good. if it doesn't, we'll just attend to it when we attend to itunes.
    next, download and install the Windows Installer CleanUp utility. use it to clear any existing itunes and/or QuickTime installation configuration information from the PC.
    Description of the Windows Installer CleanUp Utility
    next, use the the following document as a guide for manual removal of leftover itunes and quicktime program files:
    Removing iTunes and QuickTime for Windows
    now try another itunes install. does it go through properly this time?

  • Itunes wont open. Ive tried uninstalling, cleaned up my PC and then re installed again but still wont open! There are no error messages. It just wont open

    Itunes wont open. Ive tried uninstalling, cleaned up my PC and then re installed again but still wont open! There are no error messages. It just wont open! Im very frustrated and anything would help! I have Windows 7 or Vista. Idk which

    Hello Dr.Help,
    Thank you for providing so much information about the issue you are experiencing with iTunes.  It sounds like you have tried reinstalling it, but nothing happens when you launch it.  I recommend following the steps in this article to resolve launch issues with iTunes:
    iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues
    http://support.apple.com/kb/ts1717
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • ITUNES WONT OPEN COMES UP WITH ERROR MESSAGE

    ITUNES WONT OPEN COMES UP WITH ERROR MESSAGE (send error report one)

    some preliminary questions aimed at narrowing in on possible culprits.
    try launching your QuickTime. does it:
    (a) launch perfectly fine?
    (b) fail to launch with an error message? (if so, what does it say?)
    (c) exhibit other peculiar behavior? (if so, could you describe it for us?)

  • Itunes wont open at all, error message : quicktime was not found .... please reinstall ... i did that but no luck this only seems to have happened since the 10.4 update, im on windows 7 ..

    itunes wont open at all, error message : quicktime was not found .... please reinstall ... i did that but no luck this only seems to have happened since the 10.4 update, im on windows 7 ..

    Can you start QuickTime on your computer?
    You'll probably have to search for the Windows Installer Cleanup Utility and use it to remove QuickTime Player and iTunes. Then download and install the iTunes again.

  • ITunes wont open only error message

    iTunes wont open I only get an error message that reads. "The folder iTunes cannot be found or created and is required. The default location for this folder is inside the My Music folder" My music is on an exernal hard drive and it worked before I upgraded and now it wont work.
    Please help

    hiya!
    it's best to leave the "My Music" folder on the C drive. it's a Windows special folder, so having it out on an external can cause weird problems if (say) the drive letter assignment for the external drive changes.
    okay, here's the best place to start:
    iTunes for Windows: "Disk is locked" or "iTunes folder cannot be found" when installing or opening iTunes
    ... but if you run into the complication where "My Music" doesn't appear as an option in TweakUI, try the alternate technique from the following Nigel Carpenter post:
    Nigel Carpenter: re: Itunes problem
    love, b

  • My itunes wont open ! No error message

    My itunes wont open ! When I click on the icon nothing opens, not even an error message. Iv tried opening it from Windows Task Manager > Processes > Itunes.exe but nothing seems to work ! Itunes doesnt open when I sync my iphone either ! Please help

    Hi b,
    I think I'm having the same problem as Vanessa (and a lot of others from the sound of it). When I click on my iTunes shortcut the hourglass pops up for a second and then nothing happens. I can't access the music store from the net either (I get a message that says "Loading... Please wait" and then nothing happens). I've turned off my firewall (Norton Personal Firewall 2003)and that didn't help. I tried Lorraine's fix with installing the files in Norton one by one and telling them to be permitted and that didn't work. I also tried a stand alone installation of Quicktime and that helped some (the quickTime player window does now pop up for a split second before disappearing when I click Quicktime) but I still can't access the music store. I thought I'd try your suggestion of looking in the task manager for my itunes.exe file but I can't find the task manager. Where is it?

  • Itunes will not launch, no error message (windows xp, itunes 10.7.0.21)

    Itunes will not launch, no error message (windows xp, itunes 10.7.0.21)
    Yeah

    OK, so i cannot enter into iTunes safe mode, whilst monitoring proccesses in the task manager I noticed that itunes will only stay open if i keep my fingers on shift and control-i dont know if that is worth mentioning- the proccess promptly ends after the release of the said keys, (I tried both the shift control keys on either side of the keyboard-same result) so i am stuck there.
    P.S.
    This version of iTunes had previously worked before, I uninstalled everything apple related after noticing how many processes (-id est-) /applications, were using up my memory.
    afterwards I had need for iTunes, (i needed to wipe my iDevice) I reinstalled and this problem has arisen.

  • HT5654 iTunes auto update downloaded and installed on 28/01/2014. iTunes now won't launch and error message states file MSVCR80.dll is missing. Tried uninstalling and downloading/installing again to no avail. Any clues?

    iTunes auto-update dowloaded and installed on 28/01/2014. iTunes now won't launch and error message states file MSVCR80.dll is missing. Tried unistalling and downloading/installing again to no avail.  Any clues?

    Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
    (99269)

  • When trying to launch ITunes I get an error message saying that application fail to start because MSVCR80.dll file not found. Reinstalling app may fix problem.

    When trying to launch ITunes I get an error message saying that application fail to start because MSVCR80.dll file not found. Reinstalling app may fix problem.

    I've just (finally) managed to fix this problem today. I checked the Apple Support forums, and it seems a lot of people are having the same problem.
    I rang the Apple Support line, and the very helpful man (thanks Alan!) talked me through it stage by stage. If you go to the following page on the internet: http://support.apple.com/kb/TS5376   it takes you through the process. WARNING - it takes a little time!
    Basically, the first thing you have to do is go to your Program Files and double click on your iTunes folder. There'll be a number of files with the suffix .dll - you need to move all the .dll files from that folder to your desktop - you can simply click and drag them on the desktop..
    Next, uninstall iTunes - go to Control Panel / Add/Rempve Programs and when the list comes up remove iTunes. This will take a few minutes... Then reboot your computer.
    Next, go back to Control Panel / Add Remove and Remove - IN THIS ORDER -
    Apple Software Update
    Apple Mobile Device Support
    Bonjour
    Apple Application Support
    Reboot again!
    Next, check in your Program Files that the iTunes folder is completely gone - if it has, great: if it hasn't, right-click on the folder and press Shift and Delete - it will say "Are you sure you want to completely remove the folder "iTunes"? Click on "Yes".
    Reboot!
    Then go to the iTunes download page and voila! It should download iTunes without any problems... well it did for me.... Good luck!

  • ITunes wont open, getting error message, hard drive crash

    i had my secondary hard drive die. My windows is on my C: all of my music was on my D:. Now iTunes wont open becuase it cant access D:. If I try to uninstall it tells me it cant find D:. If I try to re-install it says it cant find D:. I have cleaned the registry of iTunes, and it still wont reinstall. Any thoughts, thanks in advanced.

    hi Aaron!
    error 1327.Invalid Drive D:\
    hmmm. that one's consistent with the abrupt change of drive letters too.
    have you tried the InstallShield advice on the 1327?
    Error 1327 Invalid Drive
    love, b

  • Itunes wont open error message showing

    My itunes wont open it has an error messgae saying "itunes cannot open because of your audio configuration" help please!!

    Hi, M45.
    Have a look at this article in the Apple
    Knowledge Base and let us know if it brings you any
    combination of joy and/or satisfaction.
    I hope this works...

  • Itunes will not open/launch on my desktop. There is no systems error message etc. It just won't open, help?

    My Itunes will not open/ lauch on my desktop. There is no systems error message etc. It just will not open, help?

    reset utility should help...for mac
    http://www.apple.com/support/downloads/ipodresetutility103formac.html
    for windows
    http://www.apple.com/support/downloads/ipodresetutility104forwindows.html

  • Itunes Wont Open!!!Error -50

    My Itunes wont open ever since i upgraded to 6.0.before that everything worked fine.ive tried many of the techniques and none have worked.plz help me!!!

    hmmm. okay, if you're currently just getting the "itunes has encountered an error ..." let's try the following technique.
    preliminaries
    download and save a fresh copy of the itunes 6.0.1.3 installer to your hard drive. (eventually we're going to run the install from there rather than online.)
    iTunes 6.0.1.3 Installer
    switch off any antivirus and antispyware applications prior to any uninstalls, installs or repair installs.
    uninstall
    use the complete uninstall instructions given in the following document to remove your existing itunes and quicktime:
    Troubleshooting iTunes, iPod Software, and QuickTime installation on Windows
    ... and if you run into problems on the uninstall, try using the Installer Cleanup utility:
    Description of the Windows Installer CleanUp Utility
    reboot after uninstalling.
    reinstall
    remember to switch off your antivirus and antispyware.
    reinstall itunes using the 6.0.1.3 installer you downloaded previously.
    if you get the "itunes has encountered a problem ..." error message again after that install, first check to see if your Quicktime will launch. if you get an error message when you try to launch quicktime, try using the following technique:
    iTunes 6 for Windows unexpectedly quits when opened
    keep us posted on your progress.
    love, b

  • Itunes wont open. itunes has stopped working message Please help!!

    I had itune 10.1 working just normal, and suddenly it wont open. 
      even before that, 1st problem i had  was with Quick time, i couldnt uninstall it, kept saying newer version of Quick time installed..or something like that. and i figured out to install itunes without unstalling quick time. (thanks to Google) and was working fine for a month, and suddenly, now iTune wont open. I tried unstalling it, and reinstalled... that's pretty much i can do now!!  still no hope!! (btw, I use Vista, 32bit!) Please help me... here's what Problem report shows..
      " stopped working"  
    Problem Event Name:
    BEX
    Application Name:
    iTunes.exe
    Application Version:
    10.6.1.7
    Application Timestamp:
    4f71aced
    Fault Module Name:
    cryptdlg.dll_unloaded
    Fault Module Version:
    0.0.0.0
    Fault Module Timestamp:
    4549bd25
    Exception Offset:
    69431040
    Exception Code:
    c0000005
    Exception Data:
    00000008
    OS Version:
    6.0.6002.2.2.0.768.3
    Locale ID:
    1033
    Additional Information 1:
    fd00
    Additional Information 2:
    ea6f5fe8924aaa756324d57f87834160
    Additional Information 3:
    fd00
    Additional Information 4:
    ea6f5fe8924aaa756324d57f87834160
    and another report: "stopped responding and was closed"
    Description
             A problem caused this program to stop interacting with Windows.
    Problem signature
    Problem Event Name:    AppHangB1
    Application Name:    iTunes.exe
    Application Version:    10.5.0.142
    Application Timestamp:    4e9243f2
    Hang Signature:    6a2d
    Hang Type:    2048
    OS Version:    6.0.6002.2.2.0.768.3
    Locale ID:    1033
    Additional Hang Signature 1:    579344e9ab62a3902d6e00f558f404ca
    Additional Hang Signature 2:    1748
    Additional Hang Signature 3:    8fb4784d6c7db48473361b5a4e821ea6
    Additional Hang Signature 4:    6a2d
    Additional Hang Signature 5:    579344e9ab62a3902d6e00f558f404ca
    Additional Hang Signature 6:    1748
    Additional Hang Signature 7:    8fb4784d6c7db48473361b5a4e821ea6
    PLEASE HELP ME.....  MUCHO GRASSYASS!      

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    The title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen.
    Click the Clear Display icon in the toolbar. Then take the action that isn't working the way you expect. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    Some private information, such as your name or email address, may appear in the log. Anonymize before posting.

Maybe you are looking for

  • How do I transfer songs from one library to another library?

    I recently added a new library, so me and my sister can keep our music & stuff seperate, since we each have our own iPod. I want to get her songs off of my library, and put it in her library. How do I do this?

  • How do I ask home sharing to not copy duplicate files?

    I don't know if there's a good solution for this but here is what's happened to me. I got my new iMac a couple of months ago and I dragged my entire iTunes folder on to my new machine. This unfortunately gave me two copies of almost everything someho

  • Configuring WL JMS as a foreign JMS provider with security scope (WLS 8.1)

    Hello, i have a problem accessing a queue from a foreign jms provider, if the queue has a security policy. I have the following scenario:           1) Server server1 in domain1 (WLS81) has a JMS Server with one queue queue1 with a security policy "Ca

  • How do I get my old photos back

    I used photos to store all of my photos and now they are all gone! How do I get them back?

  • Backup error when installing iOS 6 on iPhone 4

    My girlfriend has iOS 4 on her iPhone 4. She had not registered her iPhone via iTunes. Last night we installed the new version of iTunes and registered her phone while syncing data. When we tried to install iOS6, we got a message that backup failed a