Ive just done a restore on my iphone 3gs ios 5.0.1 and when it asks me to put a in my itunes password the email adress in isn't mine and when i press cancel it pops up again with a different one this happened about 5 times n then it went away anyone no y?
Ive just done a restore on my iphone 3gs ios 5.0.1 and when it asks me to put a in my itunes password the email adress in isn't mine and when i press cancel it pops up again with a different email does anyone know why?
some i get are
sha**anhall@sha**anhall.com
m**t_uniQue.apple.com
s**[email protected]
put astricks's there because i dont wanna get in toruble :/
And I don't have any cracked apps
Similar Messages
-
I couldn't unlock my iphone 3gs (ios 5.0.1), i couldn't use another diferent sim card, it's already unlock by operator but i couldn't unlock through the itunes, it show a message "no service o failure sim", why that? And how can i unlock it? Thanks
I have a hard enough time with basic English.
Hopefully this KB will be able to assist, It's also in Spanish:
http://support.apple.com/kb/TS3198?viewlocale=es_ES -
How do I change the email adress that has been set for when I forget my security questions?
I have forgotten my security questions, and the email adress that is set for when this happens, is wrong. So how can I change it??
You won't be able to change your rescue email address until you can answer your questions, you will need to contact iTunes Support / Apple in your country to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset you can then use the steps half-way down this page to update your rescue email address for potential future use : http://support.apple.com/kb/HT5312 -
Can someone help with my problem? I really want to buy some songs from Itunes but I can't access any of the songs. I know it is because I updated my iphone to iOS 7.0. I hope I didn't make a mistake of updating my iphone with the latest operating system. Help!!!!
I'm having the same issue . I get in to Ituneon my phone but nothing loads up. My girlfriend Iphone works find.
-
How can I keep only the emails I want. Once I delete them I dont want them popping up again. .
How can I keep only the emails I want. Once I delete them I don't want them popping up. How can I loer the "50 recent" minimum? Thanks
For IMAP mail only
Delete message permanently
Settings>Mail......>tap the little arrow on right of mail account>Archive Messages>OFF
You can't set it to less than 50 Recent Messages. -
How do I reset my password when I follow the instructions but do not get emails from apple
Hi lim50,
Thanks for visiting Apple Support Communities.
If you need to change your iPad mini passcode or reset your Apple ID password, use these links:
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/HT1212
Apple ID: If you forget your password
http://support.apple.com/kb/HT5787
Cheers,
Jeremy -
i had recently followed orders to restore my iPhone 3gs (iOS 6.1) from a question on apple support. However it was working fine before that, it's just that my phone didn't have signal. So it said to restore my iPhone and now it says that the Activation server is temporarily unavailable and when i plugged it into my mac, it said that i ddn't have a sim card installed. What can I do to fix this besides bring it to the store? it also bugs me because this answer was supposed to work but it just messed my phone up even more. This has already happened once and i had to take it to the store. What should I do to fix this? Thank you so much for all answers. i really appreciate.
no so i dont know what happened
-
ive just done a software update on my ipod touch i backed everything up first like it told me to but now when i connect my ipod to the computer it wont restore my music librery or apps to the ipod ive tryed to sync it several times but it still dosnt work can anyone help please
Follow the instructions to the letter here > iPhone and iPod touch: Unable to update or restore
-
I plugged my iphone in to my laptop to update it and the computer shut down right at the end. My phone now has the itunes symbol and an arrow asking me to plug my phone into itunes (I assume the laptop). It's frozen like that even when switched off. If I plug the connection into the laptop it's not recognising it now. HELP!
Hello there, xkatiex255.
The following Knowledge Base article should provide the steps for you to resolve your issue:
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
i've iphone 3GS. ios 5.1.1 i've a problems that it turnoff itslef. when i'm trying to turn it on. it just appear apple logo then go to black . keep trying till gives me battary is empty and must charge it. once i plug in it. its open and i found the battary as it 70 % for example( not empty ) if anyone try to call me its appear to me turn off but doesnt give him the mobile is turn off . its rining. please advice
Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Has any of this been tried?
-
What is the real ip address to the apple server? Someone changed the host file in windows/system32/drivers/ect, and now I can't do a restore on my iPhone 3gs
"You have to change your router's IP address to be able to access it. It will not give you the internet."
I'm not sure what that means Richard, but I did change the router's IP address from 192.168.1.1 to 192.168.5.1- isn't that what you meant in your first post. I know that isn't reflected in my screen capture that I took last night, but I did do that this morning after I read your post.
"Log on to your router and change two settings.
Change the setting in Setup from PPPoE to Automatic Configuration-DHCP and click on save.
Click on Advance Routing and change the setting from Gateway to Router then click on save."
I did this and still same results as far as I can tell. Can't get online through the router.
"Click on MAC address clone under setup tab ... click enable & click clone ...click save settings ... Check the IPaddress under WAN page ....
If getting IP in public range .... try going online ...."
I tried this- at least to the part about checking the IP address under WAN. I assume you mean the WAN page in the modem setup- nothing looked any different after trying what you suggested, and I'm not really sure where I would be "getting IP in public range" or what that means.
I'm about to give up and just buy a new router to see if I can get the same lack of results with a different one. My ISP maintains that everything is set up correctly on their end and really can't do anything more for me. The Modem works and is set up correctly and they can give tech support for a router.
Here's what my basic setup looks like now:
http://i490.photobucket.com/albums/rr270/SukarUDL/BasicSetup.png
Here's what the advanced tab looks like now:
http://i490.photobucket.com/albums/rr270/SukarUDL/AdvancedRouting.png
Modem setup looks the same
Message Edited by Writersbloc on 09-25-2008 07:05 PM -
Error (-23) when updating/restore iPhone 3GS, IOS 4.3.3
Hi guys, I am using iphone 3gs on IOS 4.3.3.
I met error code -23 on my itunes when I tried to restore/update my iphone to IOS 5.
I tried google-ing error code -23 but there seems to be none on the web.
Anyone know how to solve this error? Thanks alotDid you check your security software settings? http://support.apple.com/kb/TS3125
iTunes has to be able to contact Apple during the downloading and installing process. -
The utility's menu isn't coming up when I press and hold r and command after restarting
I have a Macbook air and The utility's menu isn't coming up when I press and hold r and command after restarting. I'm trying to restore my mac to factory settings. I have version 10.10.2 OS X Yosemite.
Then try:
Install OS X Using Internet Recovery
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Internet Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
Partition and Format the hard drive:
Select Disk Utility from the main menu and click on the Continue button.
After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Install button. Be sure to select the correct drive to use if you have more than one.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
This should restore the version of OS X originally pre-installed on the computer. -
I don't understand why recently with the new "pages" my computer stops responding. When I go to fix some grammar all of a sudden the little colored circle begins to appear and won't go away I restart my computer.
If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter "BOOT_TIME" (without the quotes) in the search box. Note the timestamps of those log messages, which refer to the times when the system was booted. Now clear the search box and scroll back in the log to the last boot time after you had the problem. Select the messages logged before the boot, while the system was unresponsive or was failing to shut down. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V). Please include the BOOT_TIME message at the end of the log extract.
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the entire contents of the most recent one, if any. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please don’t post any other kind of report — it will be very long and not helpful. -
Where can i find my iPhone 'Notes' on my PC? Apple have suggested I don't restore my replacement iPhone from a previous back up as they feel it may be corrupt, but I need my 'Notes'
Hello Pseal
There are tow ways you can handle this. One is to copy the notes to your computer using iTunes to send them to Outlook. The other would be to create or have an iCloud account so that the notes are synced online and then all you have to do is sign back in to get them. The following article will assist with troubleshooting the issue.
iOS: How to transfer or sync content to your computer
http://support.apple.com/kb/ht1296
iOS: Syncing Notes
http://support.apple.com/kb/HT4191
Thanks for using Apple Support Communities.
Regards,
-Norm G.
Maybe you are looking for
-
hai all, 1Q. let us assume that i am accessing a table. let us assume its emp table with fields eno, ename, sal then by using result set i have to get the resultset as 1 bvrkii 4000 2 xxxxxx 5000 ---- and so on if i am accessing a dept table with fie
-
I am not able to see the drill down option for the key figures (Plan, Sales Actual etc) in the report. What should be done to have the drill down option.
-
When i publish my project created in Captivate 5, I can't hear the audio. BUT I can hear the audio on the html version of the project. (When I publish, it creates both a PDF and a html version of the project. I'm new to Captivate so it's probably
-
Hi all, Im trying to make a navbar in flash for my new site, and am having some problems. Last time I used flash was about 4-5 years ago, so bare with me, my actionscript might be rusty. Im trying to have a stop command at frame 1, and then when I ro
-
I cannot get management server to start on my pc after installing oracle8i server on it. can someone please help?