Ive just updated my ipod touch 4th gen, but the bat went flat now its just a white screen and when i plug it into my laptop nothing happenes
ive just updated my ipod touch 4th gen, but the bat went flat now its just a white screen and when i plug it into my laptop nothing happenes
Hello,
This will fix your problem!
To put the device in DFU mode,
1. Connect the device to iTunes
2. Hold both the power button and the home button down simultaneously
3. After 10 seconds, release the power button but leave the home button pressed
4. iTunes should then recognize that the device has entered DFU mode and ask to restore.
That should get you back on your way.
~Lt. Leviathan
Similar Messages
-
Now everytime I try to finish the update process I get a message " Apple ID couldn't be created because of a server error. I already have an apple ID I am just trying to finish the update so I can use my ipod touch and can not figure out why I keep getting held back at this message
So I found out with alittle research that instead of entering all that info on my ipod, security questions, birthday, ect that it was much easier to just go to http://appleid.apple.com and place all that info there and save it than try the process on my ipod and it finished the update.
-
I have had my 4th gen ipod touch for over a yr. But I've only charged it twice now it wont charge or power up. I have had ppl try resetting it. But no change. Is there something I can do to fix it?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
i just today purchased an ipod touch 4th gen but the only music i have on it is what i have recently purchased. my question is how do i get the rest of the library i have on my computer to sync to it. i have tried hitting the sync button but it still wont sync the music onto it. please help
See:
iTunes 11 for Mac: Set up syncing for iPod, iPhone, or iPad
or
iTunes 11 for Windows: Set up syncing for iPod, iPhone, or iPad -
I know it's a tad late, but I recently updated my iPod touch 4th gen to iOS 6 and now it won't play any of my music. It will play Spotify and YouTube just fine, but it won't play my music. It will just skip to the next a d the next and the next after a second or two without any sound. Please help! Thank you.
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync all music and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device. -
I tried updating my iPod touch 4th gen and now the screen is bright blue or flashing white and black lines.ive tried the whole home and power button thing but it only brings up the apple icons then goes back to the blue or other screen.please help?
This has worked for some others.
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I updated my Ipod touch 4th gen (IO6 or whatever its called) And it has the picture that says to connect my ipod to Itunes, and I did, now it says "ITunes has detected an Ipod in recovery mode. You must restore this Ipod before it can be used with ITunes." I just updated it and now I have to restore it??! I don't wanna lose all my things on my ipod just for a stupid update! Please someone help!
Once the Device is asking to be Restored with iTunes... it is too late to save anything... and you must continue with the Recovery...
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Take your time... Pay particular attention to Steps 3 and 4.
After you have Recovered your Device...
Re-Sync your Content or Restore from the most recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766
Note:
Make sure you have the Current Version of iTunes Installed on your computer
iTunes free download from www.itunes.com/download -
I updated my ipod touch 4th gen to ios 5 and lost all my photos. how can i get it back? i'm using windows 7. help please? thanks!
This was the scenario:
The first time I updated, it was only my music that was lost.
When I got my music back, I lost my apps.
When I got my apps back, my contacts, notes and photos were lost.
Now I got back everything except for my photos.
(Yes, I restored from backup several times since the first update.)
Do you think if I try restoring from back up, my photos that were taken from my ipod will be restored finally?
Thank you. -
i just updated my ipod touch 4th generation to iOS 6 but there seems to be a problem when i go to the app store, it always crash, what could be the problem? thanks
Try quitting the app out of your multitasking bar, and then resetting (hold power an home buttons til device shuts off and comes back on).
-
I have an ipod touch 4th gen, installed the latest update to iOS 6 and have lost all my music, apps etc. It also linked up with an alternate email address???? Help!
I have a similar issue happenning with my ipod touch 64GB running IOS 6.0.1. My music content is stored via itunes on my Snow Leopard macbook pro as well (and not in the cloud). The music on my ipod (which is sync'd to my macbook pro when I connect via usb) has randomly disappeared about 3 or 4 times lately, not during sync'ing and unrelated to battery charge levels. Fortunately I have been able to restore it by restarting my macbook pro then re-syncing the ipod, which it is now doing as I write, but it takes hours (for over 3000 songs). Having looked at a few other forum discussion pages, it seems this may be a bug related to IOS 6 updates and using music/itunes and podcast playing apps. The same thing has intermittently occurred with some other content such as downloaded podcasts, iplayer content and photos. Once I reconnected the ipod it synced and apparently restored the content, but I can't understand why it lost it in the first place, and its very annoying. Lets hope the reinstalling works on my ipod tonight....up to 248 of 3326 songs syncing as I write....
-
i just bought an ipod touch 4th gen and cant connect it to tunes i have registered it and downloaded latest itunes it wont pass the connect to itunes screen
Hi..
Try this support article > Can't connect to the iTunes Store -
I updated my iPod Touch 4th gen. with ios 5 and all my apps and music disappeared. What to do?
This afternoon I updated my iPod Touch 4th generation with the iOS 5 update. I left the computer alone for about an hour, since that is how long iTunes said the update would take. When I came back, all of my music and apps were gone. Why did this happen? Is there any way to fix it? Thanks for the help.
- If in the USA you can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
- You can always redownload apps at no additional cost as long as you are signed into the same iTunes account the orignally purchased them.
- It appears that the apps and music were not in the iTunes library on the computer on which you performed the update. Music and the apps themselfes (app data is in the backup) are not part of the bckup hat iTunes makes as the first step of the uPdate. Apps and music are synced from your iTunes library during a latter part of the update process. -
I updated my iPod touch 4th generation from the latest iOS 4 update (i think maybe iOS 4.3.5 or something like that) to iOS 5.1.1. I updated to iOS 5.1.1 on a Windows XP Home Edition with the Service Pack 3 installed on the Windows XP (which I believe is the latest version). After updating, I unplugged my iPod from the computer. I saw that all my photos and videos were on my iPod, but there were no apps. A window popped up and told me to enter a passcode for my iPod. I entered a passcode. I then locked my iPod and entered what I thought to be the correct passcode, but my iPod remained unlocked. Desperate, I tried many passcodes with failure. After a while, my iPod became disabled for a long time. I decided to reset my iPod. After I reseted it, I chose to reset from my earlier back up. After reseting, my computer loaded on all my apps. But, when I started using my iPod, I realized all my photos, videos, music, app data (like game saves and high scores), etc. were gone! I have no idea what to do and I am very stressed about this! SOMEONE PLEASE HELP ME GET ALL MY STUFF BACK!!!!!!
Go to iTunea>Preferences>Devices and see if there is a backupright at the time you did the update. Then try restoring from that backup. If the apps are in your iTunes library, any app data will be restored to the iPod.
When restoring from an iOS 4 (or later) backup, if the device had a passcode set, iTunes will ask if you want to set a passcode (and remind you that you had protected your device with a passcode). iTunes will not ask you to set a passcode when restoring from iOS 3.x and prior backups.
Therefore, remembe the passcode that you enter this time.
It appears that if you restore from a backup, that backup is not subseqyently overwritten by the next backup. -
I want to reset my ipod touch 4th gen but i have forgotten the restrictions passcode and for some reason its not working on my laptop on itunes and the restore thing wont work! any help?
Make sure you have the Current Version of iTunes Installed on your computer
iTunes free download from www.itunes.com/download
Then See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Take your time... Pay particular attention to Steps 3 and 4.
After you have Recovered your Device...Re-Sync your Content
Note:
To remove a forgotten Restrictions passcode you will need to Restore the Device as New...
OR... From a Backup created Before the Restrictions Code was set.... -
I got my screen fixed and the day i got my ipod touch 4th gen back the wifi doesnt work unless i hold it right up to my router. Roughly every foot I move back it loses a bar and if i leave the room it doesn't even have a signal completely. Could the screen replacement have tampered with the wifi capability? Also if it helps I switched internet providers and during the time when my ipod was being fixed a new router was installed and it doesnt seem to work unless directly infront of my ipod.
Take it back to where you had the screen replaced. They messed up the connection to the wifi antenna
Installing iPod Touch 4th Generation Wi-Fi Antenna - iFixit
Maybe you are looking for
-
Where can i ask about Lifecam video file that won't work?
i used lifecam studio in order to capture once in a lifetime event. when i wanted to stop, the softwer didn't responded and i was left with 2:30 hours wmv file (1.78gb) that plays for like 1 minute and then stucks! what can i do ?! it's an emergency!
-
Queries with date functions using PreparedStatement for multiple DB
I am developing application that uses DB independant queries. I am using preparedstatement to process the queries. I need to use date functions for query selection criteria. for eg. selecting the list of employees who had joined in the last 15 days s
-
Previous archives not visible in import dialogue
I archived tape based material in FCP X 6 months ago onto an external harddisk, copied now those archived files to my new Promise Pegasus R4. Those copied archive files won't show up in the Import Media dialogue under "Archives". If I connect the ori
-
I cannot access an older time machine backup after installing an new hard drive.
After installing a new hard drive I tried to access my older backups in time machine but cannot. They are there but do not light up and allow me to access them, or select them.
-
Assign Master data Attribute value to PARENTH1
Dear All, I have the requirement to load Employee master data from BI to BPC system using data manager package. Dimension Name (BPC) InfoObject Name(BI) Employee 0EMPLOYEE In Employee master data there