IView N/A Component N/A check host entries for System SAP_ITS_XSS

Hi,
if i enter the purchasing are and by each link the same failure occurs:
Portal Runtime Error
An exception occurred while processing a request for :
iView : N/A
Component Name : N/A
Application URL ':///sap(ZT1CNE1Oa0dZV2NVTnNGTlBrTjJOZkF3JTNEJTNENnIwcUVRM0ZVdlRJN1QwQVd3dDdRdyUzRCUzRA==)/bc/gui/sap/its/BBPSC01' is not valid! Please check the protocol and host entries for system 'SAP_ITS_XSS'..
See the details for the exception ID in the log file.
the url changes each time.
can anyone help me?
regards
sleepy_head

Hi,
Please check the System Definition of SAP_ITS_XSS in SYSTEM ADMINISTRATION. In this, Please check the CONNECTOR and ITS properties.
Please check if all the entries are fine.
Regards,
<i><b>Raja Sekhar</b></i>

Similar Messages

Check encashment entry for incoming payment

Dear Viewers,
I would like to know how utillity companies are handling the customer check encashment in FI-CA.
Let's say customer is giving the check. The entry is posted as follows:
Dr. Incoming Check clearing account
Cr. Business partner account.
At the time of uploading the bank statement in FI-CA the should be posted as follows:
Dr. Main bank account
Cr. Incoming Check clearing account
I am trying get the solution in FI-CA for the incoming check encashment. Could anyone please help me to get the soultion for this.
Thanks in advance..
Thanks
Aswin

Dear Natalie,
Thank you so much for your immediate reply on this.
I have tried as you mentioned. But When I upload the bank statement the clearing is not happening in FICA .
Dr Bank A/c,
Cr. Incoming celaring A/c
Our client wants to do the above entry in FI-CA not FICO.
When I upload the bank statement through FF_5 FICA related payments are transferred to FICA but the clearing entry is not happening.
Is there any specific configuration settings are available to post this entry in FICA? If you can send me the help documents, It would be very helpful to understatnd this functionality well..
Thanks in advance for your help.
Thanks
Aswin
Edited by: Aswinkumar.V on Jul 18, 2010 9:18 AM
Edited by: Aswinkumar.V on Jul 18, 2010 9:21 AM

Portal Runtime Error - iview: N/A, Component Name: N/A

Hi All,
We are getting the following error when trying to access a tab in our portal
Portal Runtime Error
An exception occurred while processing the request for:
iView: N/A
Component Name: N/A
and when I looked at the exception log I found the following trace:
Exception ID:03:34_31/12/07_0135_209744050
[EXCEPTION]
com.sapportals.portal.prt.component.PortalComponentException: Error in service call of Portal Component
User : lynchjp
     at com.sapportals.portal.prt.core.PortalRequestManager.handlePortalComponentException(PortalRequestManager.java:969)
     at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:343)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
     at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753)
     at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
     at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:522)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:405)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Caused by: com.sapportals.portal.prt.core.PortalRequestManagerException: PortalRuntimeException
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:143)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
     at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)
     at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:646)
     at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
     ... 24 more
Caused by: java.lang.NullPointerException
     at com.sapportals.portal.navigation.NavigationService.getNode(NavigationService.java:355)
     at com.sapportals.portal.navigation.cache.CachedNavigationService.getNode(CachedNavigationService.java:156)
     at com.sapportals.portal.navigation.NavigationEventsHelperService.getCurrentNavNode(NavigationEventsHelperService.java:373)
     at com.sapportals.portal.navigation.NavigationEventsHelperService.getCurrentLaunchNavNode(NavigationEventsHelperService.java:428)
     at com.sapportals.portal.navigation.fpm.NavigationFpmListener.addToHistory(NavigationFpmListener.java:287)
     at com.sapportals.portal.navigation.fpm.NavigationFpmListener.doNavigatePhase(NavigationFpmListener.java:98)
     at com.sapportals.portal.navigation.fpm.NavigationFpmListener.doPhase(NavigationFpmListener.java:70)
     at com.sapportals.portal.pb.fpm.FPMContainer.distributeEvent(FPMContainer.java:63)
     at com.sapportals.portal.pb.fpm.FPM.doDocumentHook(FPM.java:143)
     at com.sapportals.portal.prt.service.document.DocumentHookMulticaster.doDocumentHook(DocumentHookMulticaster.java:100)
     at com.sapportals.portal.prt.service.document.DocumentHookService.doDocumentHook(DocumentHookService.java:119)
     at com.sapportals.portal.prt.service.document.DocumentHookServiceNew.doDocumentHook(DocumentHookServiceNew.java:183)
     at com.sapportals.portal.prt.connection.PortalHook.doDocumentHook(PortalHook.java:824)
     at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:261)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
     ... 28 more
Any idea as to why this is happening? Would a portal restart or workset remigration resolve this issue?
Thanks,
KN.

Hi,
Try removing iview and assiging back becoz error is saying that iview not found so remove iview and assign again
Regards
Krishna.

How to create Task Wizard iView in Portal Component

Hi All,
I want to customize the Create Request for Nomination which is in Task Wizard iView (portal content/portal users/standard portal users/com.sap.workflow.iviews/Task Wizard)
This iView created in Webdynpro application. I want to create this iView in portal component. kindly help me to develop.
I seen the createTask API for webdynpro in help.sap.
http://help.sap.com/saphelp_nw70/helpdata/EN/46/94b9b2b321581ce10000000a1553f7/frameset.htm
anybody know the create Task API for Portal.
Thanks,
Thillai.

Need to do custom develop

Hi, My Lightroom CC is showing waiting for connection and the mobile sync is not working. I have tried deleteing lrsync data, disabling firewall, checked host file etc. Still no luck.

Hi, My Lightroom CC is showing waiting for connection and the mobile sync is not working. I have tried deleteing lrsync data, disabling firewall, checked host file etc. Still no luck.

I had the same problem. It fixed itself when I opened Internet Explorer (I don't normally use it). I was opening Support Portal to get some support help, but I'm not sure if it was the page or simply opening IE that did the trick.

Cannot construct URL for runtime check using entries in SLD

Hi,
we are using high availability for PI 7.1 and are facing to the problem to construct the url for Communication channel monitoring etcv. in rwb.
In the exchange profile it looks good. Is there another place to check parameters for sld?
Thanks in advance
Frank
Message: Cannot construct URL for runtime check using entries in SLD for component af.rbi.s3p1028; correct the entries in SLD
Stacktrace:
com.sap.aii.rwb.exceptions.OperationFailedException: Cannot construct URL for runtime check using entries in SLD for component af.rbi.s3p1028; correct the entries in SLD
at com.sap.aii.rwb.core.XIJavaRTCComponent.getConnector(XIJavaRTCComponent.java:211)
at com.sap.aii.rwb.core.XIRTCComponent.ping(XIRTCComponent.java:209)
at com.sap.aii.rwb.web.componentmonitoring.model.CompTestModel.doPing(CompTestModel.java:623)
at com.sap.aii.rwb.web.componentmonitoring.viewcontroller.CmDynPage.doPing(CmDynPage.java:428)
at com.sap.aii.rwb.web.componentmonitoring.viewcontroller.CmDynPage.updateTests(CmDynPage.java:528)
at com.sap.aii.rwb.web.componentmonitoring.viewcontroller.CmDynPage.selectNode(CmDynPage.java:555)
at com.sap.aii.rwb.web.componentmonitoring.viewcontroller.CmDynPage.process_treeClick(CmDynPage.java:484)

Hello
A combination of the notes below should resolve this error:
#764176 Error in XI due to inconsistent SLD contents
#1117249 Incomplete Registration of PI components in SLD
#1334053 No automatic PI 7.10 SLD Registration
#1278563 Specification of message server host in Exchange Profile
Regards
Mark

Component Service microsoft.biztalk.adapter.sql for BizTalk Server 2009

Hello All,
We have a production server which has 2 hosts used for receiving data. When I use these hosts for SQL adapter I am getting an error that "the receive location is shutting down. Details: The error threshold has been exceeded. The receive location is
shutting down"
I did some analysis and can see that the component service "microsoft.biztalk.adapter.sql " is missing on my receive server. Can this be the reason for this?

Hi,
Please check DTC connectivity between the two servers using DTCPing and DTCTester. That at the very least should make things easier to diagnose.
http://www.microsoft.com/downloads/details.aspx?FamilyID=5e325025-4dcd-4658-a549-1d549ac17644&DisplayLang=en
http://support.microsoft.com/default.aspx?scid=kb;en-us;293799
http://support.microsoft.com/default.aspx?scid=kb;EN-US;Q306843
Make sure that "Distributed Transaction Coordinator" service is running on both biztalk and SQL server.
Rachit

ICal Error: "No virtual host found for iCal Service" - Help!

Trying to set up iCal on OS X Server 10.5.6
Server is up and running and successfully providing web services on its FQDN. Server is not currently used to support network users / services, but as and when it does it will be the Master Opendirectory server.
I have created a couple of test accounts on the server (simply in the Users group) and enabled both for Calendar Access.
I have provided the details of the FQDN on the iCal page, and checked that the default port (8008) has been opened in the firewall.
In web services there is one virtual domain (using name based virtual server) and the default domain in operation. Both appear to be functioning as would be expected.
When I click on 'start service' for iCal, I get this error.
"No virtual host found for iCal service"
I cannot find any information about this in iCal manual, or online documentation. Can anyone here provide pointer to where this information is, or what it means?
Would be most grateful.

Hey there,
See if any of the solutions provided in either of these older threads can steer you in the right direction.
http://discussions.apple.com/thread.jspa?threadID=1201737
http://discussions.apple.com/thread.jspa?threadID=1242823&start=0&tstart=-3
B-rock

There is no iView available for system "SAP_ERP_Manufacturing"...

Hi out there,
I have imported the business packages Common Parts 1.2 and Maintenance Technician 1.2 in our portal testsystem (nw7, sps18). after setting up a system with alias SAP_ECC_MANUFACTURING and asigning the role com.sap.pct.erp.maintech.maintenance_technician to my super admin user I can browse through the navigation of this role and all the iviews do what they are supposed to to (e.g. I can call the "Technical Structure View" and create a notification for an object out of the list)...
When assigning the role com.sap.pct.erp.maintech.maintenance_technician to a test user (with the roles and groups from a simple enduser), I get the following error when trying to create anotification (or doing anything else in the technical structure view): There is no iView available for system "SAP_ERP_Manufacturing": object "notification".
I have checked the permissions in all relevant areas of the PCD. Everywhere there are at least read permissions for everyone. Also I have copied the iView com.sap.pct.erp.common.notification_create to another place in the PCD and added it to the operation "create" of the Business Object "SAP_ERP_Manufacturing.notification" (with the highest priority). But that didn't change anything...
Well, I don't know what else I could do to find out what's wrong. I just hope anyone out there can help me out... )
Best Regards
Juergen Kuechle.

Hi Thulasi,
sorry, but that's not the point. The system with alias "SAP_ECC_MANUFACTURING" is used to call the WD application in the R/3 backend system (which works out pretty fine). The WD application then calls back the portal using the object based navigation technology (OBN). In this case it calls the object SAP_ERP_Manufacturing.notification and tries to execute the iview linked to the action "create" of the object.
And here exactly is the problem that I'm facing. With the super admin user OBN works fine, with an enduser the OBN fails...
Regards, Juergen.

Error in "Checking Availabe Space for the DB2 UDB for Unix..." phase

Hello,
We are in the middle of an Upgrade proyect from R/3 4.6C (kernet 4.6D EXT) to ECC 6.0.
As a first step we are doing an Heterogenous System Copy to migrate from servers with HP-UX B11.11/Informix 9.4 to servers with AIX 5.3/DB2 UDB 8.
We already did the database import with no errors. When we are installing R3 4.6C in the target server we are getting u201CMemory Fault (coredump)u201D error in the u201CChecking Availabe Space for the DB2 UDB for Unix, Windows Tablespacesu201D phase.
Any advice will be appreciated.
Best Regards
Francisco

Hello Paul,
There is no db2diag.log. We are in the first steps of the installation.
Operating System logs just shows an ABNORMALY TERMINATION OF SOTWARE error.
This is the CEDBMIG.log
INFO 2010-08-04 10:12:00 CommandFileController SyFileCopy:150
    Copying source file CEDBMIG.R3S to target file CEDBMIG.R3S.30 ...
INFO 2010-08-04 10:12:01 Main
    Preparation successfully completed.
INFO 2010-08-04 10:12:02 CENTRDBINSTANCE_IND_DB6 SyCheckHostnameLookup:434
    checking host name lookup for 'sapqas'
INFO 2010-08-04 10:12:02 CENTRDBINSTANCE_IND_DB6 SyCheckHostnameLookup:473
    offical host name for 'sapqas' is 'sapqas'.
INFO 2010-08-04 10:12:02 CENTRDBINSTANCE_IND_DB6 SyCheckHostnameLookup:541
    host 'sapqas' has ip address '172.26.26.64'
INFO 2010-08-04 10:12:02 CENTRDBINSTANCE_IND_DB6 SyCheckHostnameLookup:581
    offical host name for '172.26.26.64' is 'sapqas'.
INFO 2010-08-04 10:12:02 CENTRDBINSTANCE_IND_DB6 SyCheckHostnameLookup:434
    checking host name lookup for 'sapqas'
INFO 2010-08-04 10:12:02 CENTRDBINSTANCE_IND_DB6 SyCheckHostnameLookup:473
    offical host name for 'sapqas' is 'sapqas'.
INFO 2010-08-04 10:12:02 CENTRDBINSTANCE_IND_DB6 SyCheckHostnameLookup:541
    host 'sapqas' has ip address '172.26.26.64'
INFO 2010-08-04 10:12:02 CENTRDBINSTANCE_IND_DB6 SyCheckHostnameLookup:581
    offical host name for '172.26.26.64' is 'sapqas'.
INFO 2010-08-04 10:12:02 CENTRDBINSTANCE_IND_DB6 SyCheckHostnameLookup:434
    checking host name lookup for 'sapqas'
INFO 2010-08-04 10:12:02 CENTRDBINSTANCE_IND_DB6 SyCheckHostnameLookup:473
    offical host name for 'sapqas' is 'sapqas'.
INFO 2010-08-04 10:12:02 CENTRDBINSTANCE_IND_DB6 SyCheckHostnameLookup:541
    host 'sapqas' has ip address '172.26.26.64'
INFO 2010-08-04 10:12:02 CENTRDBINSTANCE_IND_DB6 SyCheckHostnameLookup:581
    offical host name for '172.26.26.64' is 'sapqas'.
INFO 2010-08-04 10:12:02 CENTRDBINSTANCE_IND_DB6 SyCheckHostnameLookup:434
    checking host name lookup for 'sapqas'
INFO 2010-08-04 10:12:02 CENTRDBINSTANCE_IND_DB6 SyCheckHostnameLookup:473
    offical host name for 'sapqas' is 'sapqas'.
INFO 2010-08-04 10:12:02 CENTRDBINSTANCE_IND_DB6 SyCheckHostnameLookup:541
    host 'sapqas' has ip address '172.26.26.64'
INFO 2010-08-04 10:12:02 CENTRDBINSTANCE_IND_DB6 SyCheckHostnameLookup:581
    offical host name for '172.26.26.64' is 'sapqas'.
INFO 2010-08-04 10:12:23 CDSERVERMIG_IND_DB6 InternalColdKeyCheck:0
    The CD KERNEL will not be copied.
INFO 2010-08-04 10:12:23 CDSERVERMIG_IND_DB6 InternalColdKeyCheck:0
    The CD RDBMS will not be copied.
INFO 2010-08-04 10:12:23 CDSERVERMIG_IND_DB6 InternalColdKeyCheck:0
    The CD EXPORT1 will not be copied.
INFO 2010-08-04 10:12:23 CALCRAM_IND_DB6 SyCoprocessCreate:300
    Creating coprocess /usr/sbin/lsattr -El sys0 -a realmem ...
INFO 2010-08-04 10:12:23 CALCRAM_IND_DB6 SyRamSizeGet:100
    The process lsattr puts out:
     realmem 8388608 Amount of usable physical memory in Kbytes False
INFO 2010-08-04 10:12:23 CALCRAM_IND_DB6 SyRamSizeGet:700
    Physical RAM size is 8192 MB.
INFO 2010-08-04 10:12:23 CALCRAM_IND_DB6 SySwapGetSize:100
    Retrieving swap space size ...
INFO 2010-08-04 10:12:23 CALCRAM_IND_DB6 SyCoprocessCreate:300
    Creating coprocess /usr/sbin/lsps -s ...
INFO 2010-08-04 10:12:23 CALCRAM_IND_DB6 SySwapGetSize:150
    The process lsps puts out:
     Total Paging Space   Percent Used
INFO 2010-08-04 10:12:23 CALCRAM_IND_DB6 SySwapGetSize:150
    The process lsps puts out:
           8192MB               1%
INFO 2010-08-04 10:12:23 CALCRAM_IND_DB6 SySwapGetSize:500
    Currently activated swap space is 8192 MB.
INFO 2010-08-04 10:12:31 CENTRDBINSTANCE_IND_DB6 InternalWarmKeyCheck:0
    The installation phase is starting now. Please look in the log
    file for further information about current actions.
INFO 2010-08-04 10:12:31
    Requesting Installation Details
INFO 2010-08-04 10:12:31
    Reading and Checking DB2 UDB for UNIX, Windows Specific Keys
INFO 2010-08-04 10:12:31
    Select the DB2 Storage Management.
INFO 2010-08-04 10:12:31
    Choose the number of storage paths for DB2's Automatic Storage
    Management.
INFO 2010-08-04 10:12:31 CDSERVERMIG_IND_DB6 InternalWarmKeyCheck:0
    The CD KERNEL will not be copied.
INFO 2010-08-04 10:12:31 CDSERVERMIG_IND_DB6 InternalWarmKeyCheck:0
    The CD RDBMS will not be copied.
INFO 2010-08-04 10:12:31 CDSERVERMIG_IND_DB6 InternalWarmKeyCheck:0
    The CD EXPORT1 will not be copied.
INFO 2010-08-04 10:12:31
    Requesting Information on CD-ROMs
INFO 2010-08-04 10:12:31
    Calculating RAM Distribution
INFO 2010-08-04 10:12:31
    Creating the Service Entry for the Dispatcher
INFO 2010-08-04 10:12:31
    Creating the Service Entry for the Gateway Service
INFO 2010-08-04 10:12:31
    Creating the Service Entry for the Secure Gateway Service
INFO 2010-08-04 10:12:31
    Creating the Service Entry for the Message Server
INFO 2010-08-04 10:12:31
    Creating the SAP Administration Group sapsys
INFO 2010-08-04 10:12:32
    Creating the Database Administration Group db<dbsid>adm
INFO 2010-08-04 10:12:32
    Creating the Group db<dbsid>ctl
INFO 2010-08-04 10:12:32
    Creating the Group db<dbsid>mnt
INFO 2010-08-04 10:12:32
    Creating the SAP connect user
INFO 2010-08-04 10:12:32
    Setting Password of the SAP connect user
INFO 2010-08-04 10:12:32
    Creating the db2<sapsid> User
INFO 2010-08-04 10:12:32
    Setting the User Password
INFO 2010-08-04 10:12:32
    Creating the SAP System Administrator
INFO 2010-08-04 10:12:32
    Setting Password for for the SAP System Administrator
INFO 2010-08-04 10:12:32
    Creating Directories
INFO 2010-08-04 10:12:32
    Creating Symbolic Links
INFO 2010-08-04 10:12:32
    Getting Minimal Size of the Database
INFO 2010-08-04 10:12:32
    Changing DB2 UDB for UNIX, Windows Tablespace Data
INFO 2010-08-04 10:12:32
    Checking if Required Directories Exist
INFO 2010-08-04 10:12:32
    Checking Available Space for the SAP Instance
INFO 2010-08-04 10:12:32
    Checking Available Space for the DB2 UDB for UNIX, Windows
    Tablespaces
This is the CEDBMIG.R3S log
120_TEMPLATE=@CDMOUNTPATH@/@OS@/COMMON/INSTALL/SAPSRC.CSH
130_SOURCE=@DB_HOME@/.cshrc
130_TEMPLATE=@CDMOUNTPATH@/@OS@/COMMON/INSTALL/DBSRC.CSH
200_SOURCE=@DB_HOME@/.profile
200_TEMPLATE=@CDMOUNTPATH@/@OS@/COMMON/INSTALL/SAPSRC.SH
210_SOURCE=@DB_HOME@/.profile
210_TEMPLATE=@CDMOUNTPATH@/@OS@/COMMON/INSTALL/DBSRC.SH
[Z_OSUSERSIDADMENVIRONMENT_IND_DB6]
100_GROUP=sapsys
100_OWNER=@LOWER_SAPSYSTEMNAME@adm
100_PERMISSION=0644
100_SOURCE=@HOME@/.login
100_TEMPLATE=@CDMOUNTPATH@/@OS@/COMMON/INSTALL/SAPSRC.CSH
110_SOURCE=@HOME@/.login
110_TEMPLATE=@CDMOUNTPATH@/@OS@/COMMON/INSTALL/DBSRC.CSH
120_GROUP=sapsys
120_OWNER=@LOWER_SAPSYSTEMNAME@adm
120_PERMISSION=0644
120_SOURCE=@HOME@/.cshrc
120_TEMPLATE=@CDMOUNTPATH@/@OS@/COMMON/INSTALL/SAPSRC.CSH
130_SOURCE=@HOME@/.cshrc
130_TEMPLATE=@CDMOUNTPATH@/@OS@/COMMON/INSTALL/DBSRC.CSH
200_SOURCE=@HOME@/.profile
200_TEMPLATE=@CDMOUNTPATH@/@OS@/COMMON/INSTALL/SAPSRC.SH
210_SOURCE=@HOME@/.profile
210_TEMPLATE=@CDMOUNTPATH@/@OS@/COMMON/INSTALL/DBSRC.SH
[Z_R3DIRECTORIES_IND_IND]
101_PATH=@SAPDIR@
101_PERMISSION=0775
101_SET_FILE_ATTRIBUTES=YES
101_USERGROUP=sapsys
101_USERNAME=@LOWER_SAPSYSTEMNAME@adm
102_PATH=@SAPDIR@/tmp
103_PATH=@SAPDIR@/trans
104_PATH=@SAPDIR@/trans/tmp
104_SET_FILE_ATTRIBUTES=NO
105_PATH=@SAPDIR@/trans/EPS
106_PATH=@SAPDIR@/trans/EPS/in
107_PATH=@SAPDIR@/trans/EPS/out
108_PATH=@SAPDIR@/trans/EPS/log
109_PATH=@SAPDIR@/trans/bin
110_PATH=@SAPDIR@/trans/buffer
111_PATH=@SAPDIR@/trans/cofiles
112_PATH=@SAPDIR@/trans/data
113_PATH=@SAPDIR@/trans/etc
114_PATH=@SAPDIR@/trans/log
115_PATH=@SAPDIR@/trans/sapnames
120_PATH=@SAPDIR@/@SAPSYSTEMNAME@
120_PERMISSION=0751
120_SET_FILE_ATTRIBUTES=YES
121_PATH=@SAPDIR@/@SAPSYSTEMNAME@/SYS
121_PERMISSION=0755
122_PATH=@SAPDIR@/@SAPSYSTEMNAME@/SYS/exe
123_PATH=@SAPDIR@/@SAPSYSTEMNAME@/SYS/exe/opt
124_PATH=@SAPDIR@/@SAPSYSTEMNAME@/SYS/gen
125_PATH=@SAPDIR@/@SAPSYSTEMNAME@/SYS/gen/opt
126_PATH=@SAPDIR@/@SAPSYSTEMNAME@/SYS/gen/dbg
127_PATH=@SAPDIR@/@SAPSYSTEMNAME@/SYS/src
128_PATH=@SAPDIR@/@SAPSYSTEMNAME@/@INSTANCENAME@
129_PATH=@SAPDIR@/@SAPSYSTEMNAME@/@INSTANCENAME@/data
130_PATH=@SAPDIR@/@SAPSYSTEMNAME@/@INSTANCENAME@/log
131_PATH=@SAPDIR@/@SAPSYSTEMNAME@/@INSTANCENAME@/work
131_PERMISSION=0775
132_PATH=@SAPMOUNT@
140_PATH=@SAPMOUNTEXE@
141_PATH=@SAPMOUNTPROFILE@
141_PERMISSION=0755
142_PATH=@SAPMOUNTGLOBAL@
142_PERMISSION=0700
150_PATH=@SAPDIR@/@SAPSYSTEMNAME@/@INSTANCENAME@/sec
160_PATH=@STARTDIRECTORY@
160_PERMISSION=0777
[Z_R3DIRPERMISSIONS_IND_IND]
101_CHANGE_ON_NFS=NO
101_PATH=@SAPMOUNT@
101_PERMISSION=0755
101_TRAVERSE=
101_USERGROUP=sapsys
101_USERNAME=@LOWER_SAPSYSTEMNAME@adm
102_CHANGE_ON_NFS=NO
102_PATH=@SAPMOUNTEXE@
102_PERMISSION=0755
102_TRAVERSE=
102_USERGROUP=sapsys
102_USERNAME=@LOWER_SAPSYSTEMNAME@adm
103_CHANGE_ON_NFS=NO
103_PATH=@SAPMOUNTGLOBAL@
103_PERMISSION=0710
103_TRAVERSE=
103_USERGROUP=db@LOWER_DB_SID@adm
103_USERNAME=@LOWER_SAPSYSTEMNAME@adm
104_CHANGE_ON_NFS=NO
104_PATH=@SAPMOUNTPROFILE@
104_PERMISSION=0755
104_TRAVERSE=
104_USERGROUP=sapsys
104_USERNAME=@LOWER_SAPSYSTEMNAME@adm
105_CHANGE_ON_NFS=NO
105_PATH=@SAPDIR@/@SAPSYSTEMNAME@
105_PERMISSION=0755
105_TRAVERSE=
105_USERGROUP=sapsys
105_USERNAME=@LOWER_SAPSYSTEMNAME@adm
120_CHANGE_ON_NFS=NO
120_PATH=@HOME@
120_PERMISSION=0700
120_TRAVERSE=
120_USERGROUP=sapsys
120_USERNAME=@LOWER_SAPSYSTEMNAME@adm
121_CHANGE_ON_NFS=NO
121_PATH=@HOME@
121_PERMISSION=0777
121_TRAVERSE=FILES
121_USERGROUP=sapsys
121_USERNAME=@LOWER_SAPSYSTEMNAME@adm
130_CHANGE_ON_NFS=NO
130_PATH=@STARTDIRECTORY@
130_PERMISSION=0777
130_TRAVERSE=
130_USERGROUP=sapsys
130_USERNAME=@LOWER_SAPSYSTEMNAME@adm
140_CHANGE_ON_NFS=YES
140_PATH=@SAPDIR@/trans
140_PERMISSION=0775
140_TRAVERSE=
140_USERGROUP=sapsys
140_USERNAME=@LOWER_SAPSYSTEMNAME@adm
141_CHANGE_ON_NFS=YES
141_PATH=@SAPDIR@/trans/bin
141_PERMISSION=0775
141_TRAVERSE=
141_USERGROUP=sapsys
141_USERNAME=@LOWER_SAPSYSTEMNAME@adm
[Z_R3FILEPERMISSIONS_IND_IND]
101_CHANGE_ON_NFS=NO
101_PATH=@SAPMOUNTEXE@
101_PERMISSION=0755
101_TRAVERSE=SUBDIRECTORIES
101_USERGROUP=sapsys
101_USERNAME=@LOWER_SAPSYSTEMNAME@adm
102_CHANGE_ON_NFS=NO
102_PATH=@SAPMOUNTEXE@
102_PERMISSION=0755
102_TRAVERSE=FILES
102_USERGROUP=sapsys
102_USERNAME=@LOWER_SAPSYSTEMNAME@adm
103_CHANGE_ON_NFS=NO
103_PATH=@SAPMOUNTGLOBAL@
103_PERMISSION=0700
103_USERGROUP=sapsys
103_USERNAME=@LOWER_SAPSYSTEMNAME@adm
104_CHANGE_ON_NFS=NO
104_PATH=@SAPMOUNTPROFILE@
104_PERMISSION=0755
104_TRAVERSE=SUBDIRECTORIES
104_USERGROUP=sapsys
104_USERNAME=@LOWER_SAPSYSTEMNAME@adm
105_CHANGE_ON_NFS=NO
105_PATH=@SAPMOUNTPROFILE@
105_PERMISSION=0755
105_TRAVERSE=FILES
105_USERGROUP=sapsys
105_USERNAME=@LOWER_SAPSYSTEMNAME@adm
106_CHANGE_ON_NFS=NO
106_PATH=@SAPMOUNTEXE@/saposcol
106_PERMISSION=04755
106_USERGROUP=sapsys
106_USERNAME=root
112_CHANGE_ON_NFS=NO
112_PATH=@SAPDIR@/@SAPSYSTEMNAME@
112_PERMISSION=0751
112_TRAVERSE=SUBDIRECTORIES
112_USERGROUP=sapsys
112_USERNAME=@LOWER_SAPSYSTEMNAME@adm
113_CHANGE_ON_NFS=NO
113_PATH=@SAPDIR@/@SAPSYSTEMNAME@
113_PERMISSION=0751
113_TRAVERSE=FILES
113_USERGROUP=sapsys
113_USERNAME=@LOWER_SAPSYSTEMNAME@adm
114_CHANGE_ON_NFS=NO
114_PATH=@SAPDIR@/@SAPSYSTEMNAME@/SYS
114_PERMISSION=0755
114_TRAVERSE=SUBDIRECTORIES
114_USERGROUP=sapsys
114_USERNAME=@LOWER_SAPSYSTEMNAME@adm
115_CHANGE_ON_NFS=NO
115_PATH=@SAPDIR@/@SAPSYSTEMNAME@/SYS
115_PERMISSION=0755
115_TRAVERSE=FILES
115_USERGROUP=sapsys
115_USERNAME=@LOWER_SAPSYSTEMNAME@adm
116_CHANGE_ON_NFS=NO
116_PATH=@SAPDIR@/@SAPSYSTEMNAME@/@INSTANCENAME@
116_PERMISSION=0755
116_TRAVERSE=SUBDIRECTORIES
116_USERGROUP=sapsys
116_USERNAME=@LOWER_SAPSYSTEMNAME@adm
117_CHANGE_ON_NFS=NO
117_PATH=@SAPDIR@/@SAPSYSTEMNAME@/@INSTANCENAME@
117_PERMISSION=0755
117_TRAVERSE=FILES
117_USERGROUP=sapsys
117_USERNAME=@LOWER_SAPSYSTEMNAME@adm
118_CHANGE_ON_NFS=NO
118_PATH=@SAPDIR@/@SAPSYSTEMNAME@/@INSTANCENAME@/work
118_PERMISSION=0775
118_USERGROUP=sapsys
118_USERNAME=@LOWER_SAPSYSTEMNAME@adm
120_CHANGE_ON_NFS=NO
120_PATH=@HOME@
120_PERMISSION=0700
120_USERGROUP=sapsys
120_USERNAME=@LOWER_SAPSYSTEMNAME@adm
121_CHANGE_ON_NFS=NO
121_PATH=@HOME@
121_PERMISSION=0700
121_TRAVERSE=FILES
121_USERGROUP=sapsys
121_USERNAME=@LOWER_SAPSYSTEMNAME@adm
[Z_R3LINKS_IND_IND]
101_LINKCONTENT=@SAPMOUNTEXE@
101_LINKNAME=@SAPDIR@/@SAPSYSTEMNAME@/SYS/exe/dbg
102_LINKCONTENT=dbg
102_LINKNAME=@SAPDIR@/@SAPSYSTEMNAME@/SYS/exe/run
103_LINKCONTENT=@SAPMOUNTGLOBAL@
103_LINKNAME=@SAPDIR@/@SAPSYSTEMNAME@/SYS/global
104_LINKCONTENT=@SAPMOUNTPROFILE@
104_LINKNAME=@SAPDIR@/@SAPSYSTEMNAME@/SYS/profile
[Z_SAPDATAPATH]
S1=/db2/@SAPSYSTEMNAME@/sapdata1
S2=/db2/@SAPSYSTEMNAME@/sapdata2
S3=/db2/@SAPSYSTEMNAME@/sapdata3
S4=/db2/@SAPSYSTEMNAME@/sapdata4
S5=/db2/@SAPSYSTEMNAME@/sapdata5
S6=/db2/@SAPSYSTEMNAME@/sapdata6
SAPDATAT=/db2/@SAPSYSTEMNAME@/sapdatat
As you can see there is not an error message, the installation simply stops when the try to check the space available for tablespaces.
Regards

Portal error in SRM 7.0 -"There is no iView available for system "SAP_SRM"

Hi All,
We have portal ( SAP EP 7.0) as the front end for SRM 7.0 ,We have integrated SRM with portal through the system alias SAP_SRM.
With the PDP scenario the users are facing the below issue while they try to open any documents ( let it be RFx/contract).
"There is no iView available for system "SAP_SRM": object "cont". For more information, contact your administrator."
We installed the latest JRE (1.6.0.17) in the machine , but it didn't fix the problem. It appears to be a a lorcal issue with the settings in browser as some people ( very few) are able to open the documents.
Any pointers?
Thanks
Arun

Hi Arun,
Pls check the portal content and portal roles with iviews maintained properly or not.
Pls chek this page for ivew and portal role matrix. and cross check with your portal roles.
This might help you.
http://help.sap.com/saphelp_srm70/helpdata/en/27/d1185fd9764001953386c6e10058ab/frameset.htm
Regards
Kiran

Entry for host name is missing or empty (Secure Store key: admin/host/).

Hi All,
I am in the process of installing EP7 on SLES9 and MaxDB 7.6 on a clustered HA environment where the SCS, DB and JC components are installed under and referenced by their virtual hostname (eg. sapinst SAPINST_USE_HOSTNAME <virt name>).
The SCS instance is installed, the Database Instance is installed and I'm currently in the process of Installing the JC and Deploying the EP packages.
During the installation, SDM is put into standalone mode and sapinst tries to deploy the package EPBC06_0.SCA where it fails and the sdm_server.err shows :
"com.sap.sdm.serverext.servertype.inqmy.TargetEngineConfigurationException: Cannot retrieve Engine logon data from Secure Store: Entry for host name is missing or empty (Secure Store key: admin/host/). at com.sap.sdm.serverext.servertype.inqmy.InQMyTargetSystemConfigurator.getLoginDataFromSecStoreInQMyTargetSystemConfigurator.java:286) at com.sap.sdm.serverext.servertype.inqmy.InQMyTargetSystemConfigurator.getEngineLoginDataInQMyTargetSystemConfigurator.java:197) at com.sap.sdm.serverext.servertype.inqmy.EngineStateServiceImpl.determineCurrentEngineStateEngineStateServiceImpl.java:53) at com.sap.sdm.app.proc.deployment.states.State.determineJ2EEEngineState(State.java:97) at com.sap.sdm.app.proc.deployment.states.StateBeforeFirstDeployment.getJ2EEEngineStateChangeDescriptionStateBeforeFirstDeployment.java:75) at com.sap.sdm.app.view.proc.deployment.mapper.StateMapper.map(StateMapper.java:56) at com.sap.sdm.app.view.proc.deployment.mapper.FlowMapper.map(FlowMapper.java:28) at com.sap.sdm.app.view.session.AppViewUpdater.updateAppView(AppViewUpdater.java:22) at com.sap.sdm.app.view.session.AppViewUpdater.sessionStateChanged(AppViewUpdater.java:18) at com.sap.sdm.app.proc.deployment.impl.SessionStateObserversImpl.notifySessionStateChangedSessionStateObserversImpl.java:46) at com.sap.sdm.app.proc.deployment.states.InstContext.processEventServerSide(InstContext.java:85) at com.sap.sdm.app.proc.deployment.states.InstContext.processEvent(InstContext.java:59) at com.sap.sdm.app.view.controllers.DeployEventProcessor.processEvent(DeployEventProcessor.java:11) at com.sap.sdm.client_server.deployserver.DeployCmdProcessor.processEvent(DeployCmdProcessor.java:264) at com.sap.sdm.client_server.deployserver.DeployCmdProcessor.process(DeployCmdProcessor.java:108) at com.sap.sdm.gui.server.GuiAdminRoleCmdProcessor.processGuiAdminRoleCmdProcessor.java:72) at com.sap.sdm.is.cs.session.server.SessionCmdProcessor.process(SessionCmdProcessor.java:67) at com.sap.sdm.is.cs.cmd.server.CmdServer.execCommandCmdServer.java:76) at com.sap.sdm.client_server.launch.ServerLauncher$ConnectionHandlerImpl.handle(ServerLauncher.java:286) at com.sap.sdm.is.cs.ncserver.NetCommServer.serveNetCommServer.java:43) at com.sap.sdm.is.cs.ncwrapper.impl.ServiceWrapper.serveServiceWrapper.java:39) at com.sap.bc.cts.tp.net.Worker.run(Worker.java:50) at java.lang.Thread.run(Thread.java:816)"
The same problem occurs if I try to deploy this package or any other package using SDM in standalone or integrated mode.
configtool -> Secure Store -> admin/host/<SID> is the virtual hostname of the JC instance.
I've tried the following to no avail:
- Changed configtool -> Secure Store -> admin/host/<SID> to be the physical hostname of the box.
- Changed configtool -> Server -> Dispatcher -> Service -> P4 -> bindhost (from 0.0.0.0 to JC virt IP).
- Changed the <Host> entry in sdmrepository.sdc from <phys hostname> to <jc virt hostname>.
The SAPLOCALHOST, SAPGLOBALHOST all seem to be set correctly in the SAP profiles.
Has anyone had this issue? If so, what do I need to check/change? Any ideas?
Notice the message does not reference the <SID> in "admin/host", could this be related to the issue? If so, what can cause this?
TIA
Anthony

Hi All,
Just an update, I was able to get around my problems by patching the 2004s media from sp6 to sp8, uninstalling my scs, and database and re-installing from the patched media.

RZ20 server host entries disappear under Operating System Node

Hi,
I am trying to setup auto reaction methods in RZ21 and want to assign them to properties in RZ20 on SolMan (as my CEN) under
Operating System -> <server host> -> filesystems -> <file path of choice> -> Percentage_Used
for the percentage_used i assign an auto reaction method and save it. Now it seems for some bizarre reason, some of the server hosts entries under Operating Systems disappear at the next auto refresh and reappear and i lose my assigned auto reaction methods, which means i have to redo it again.
does anyone else have or had this problem and have a solution for this?
your help would be much appreciated.
Mani

I would not encourage using root user.
Your oracle user may not have the correct permissions. You need to ensure that oracle is in the required OS group and have the required privileges and file persmissions. Ensure that root.sh was run during your install.
If you check the corresponding trace files under
$ORACLE_HOME/sysman/log/ you may find more detailed message.
e.g emagent.trc

A135-S4527 Host Process for Windows Services stopped...

I have started getting a Windows error: Host Process for Windows Services stopped working and was closed. Laptop runs fine except my network connection says Connection Status: Unknown The service to detect this status is turned off and McAfee stopped working. Can't run any of the MS tools either. I am suspicous of conficker e but don't know how to detect or remove it. Have seen the b variant on an XP machine at work, but the tools we used on it don't work on Vista.
I am running Vista Home Edition (came on Laptop) upgraded to SP1 with auto-updates on. McAfee was also set for auto-updates and nightly full scans, active e-mail and internet scanning. No recent software downloads except for updates.
Have been having the issue since about April 28. Tried to restore but no dates exist past May 5. Tried the F8 Startup recovery no problems found. Have tried restarting services but they quickly stop again. Uninstalled McAfee and tried AVG. It allowed defintion updates and I scanned all files. No viruses, trojans or malware detected.
Any suggestions? I have a tasklstserv file I can copy and paste if it will help.

That's a bad-sector event. At a command prompt (cmd.exe), run chkdsk /r.
Event ID 7 Source Disk
But it doesn't seem likely that's the cause of the message. When you get another one, note the time and check the Application and System logs for entries at that exact time.
Thanks for the detailed information.
What virus protection do you use?
-Jerry

HELP! GENERIC Host Process For Win32 SERVI

I updated my drivers the other day now I can't keep my sound working. A few minuts after I reboot I get this message "GENERIC Host Process For Win32 SERVICES". So I tried to uninstall all previous installed drivers and reinstall the newest ones. This didn't help. Once I get the message from windows I then try to open my Volume Control on my tool bar and then I get this message "There are no acti've mixer devices available" Anybody have any ideas on what happend?Message Edited by SYT on 09-09-2005 05:24 PM

SYT wrote:
I updated my drivers the other day now I can't keep my sound working. A few minuts after I reboot I get this message "GENERIC Host Process For Win32 SERVICES". So I tried to uninstall all previous installed drivers and reinstall the newest ones. This didn't help. Once I get the message from windows I then try to open my Volume Control on my tool bar and then I get this message "There are no acti've mixer devices available" Anybody have any ideas on what happend?Message Edited by SYT on 09-09-2005 05:24 PM
Which OS? Which sound card?
Something went wrong when you updated your drivers.
Were there any error messages when you updated your sound drivers?
Can you adjust volume on Windows 'mixer' (Control Panel-->Sounds and Multimedia --> Audio tab:Sound Playback:Volume)? If not then somehow you have maybe 'lost (control over)' windows kmixer.
If you got XP then try if reinstalling SP2 helps anything. Check also first, if "Audio Service" is running (on services manager).
.jtp

IView N/A Component N/A check host entries for System SAP_ITS_XSS

Similar Messages

Maybe you are looking for