IView not found error when excuting ABAP Web Dynpro iView

Hi Experts,
I have created one ABAP Web Dynpro iView for an existing Application.
Parameters I have passed for iView creation.
Namespace : sap
Application Name: SampleApp
System Name: R3_SYS.
Can any one please pass on me the details what are the mandatory parameters need to be passed.
Thanks in Advance,
Chinna.

Hi Chinna,
You need to check the following parameters like
Namespace - should be 'sap' as this is root node in SICF
Application Name: - check name of WD application in se80
Please refer to below thread for creating WD ABAP iview.
Re: Webdynpro ABAP iView Blank Page
Web Dynpro for ABAP iVIew's Namespace parameter
how to create iview from webdynpro application  abap
Hope it helps
Regards
Arun

Similar Messages

  • Get file not found error when I try to sync

    I get file not found error when I try to sync Iphone.

    SteveDVD,
    The use of the .WMV was because that was part of the Library .EM template. I would not anticipate problems with other formats, so long as they are supported and the same for all of your Menus in the Project.
    If you have done several Motion Menu Renderings, you might want to clear Encore's Media Cache, just in case it is still referencing previous Render files.
    And yes, the re-Importation should yield the same result as Linking/re-Linking.
    Unfortunately, I do not have CS4, so I can't test this for you. There do seem to be a few real Bugs in the various CS4 programs, and maybe this is one?
    That "File Not Found" rings a bell in my feeble brain. Seems that there was a post on that, but I do not remember it being related to Motion Menus. Maybe search will yield something of use.
    Good luck,
    Hunt

  • Action list not found error when trying to install Flash 11. I have IE8 and windows 32 bit. What can

    action list not found error when trying to install Flash 11. I have IE8 and windows 32 bit. What can I do? Thanks

    Hi, Please try to download the installer from the links provided in the following page: http://helpx.adobe.com/content/help/en/flash-player/kb/installation-problems-flash-player- windows.html#main-pars_header
    Thanks,
    Sunil

  • Captivate 8:  Why am I getting a HTTP 404 Not Found error when I try to preview a responsive project?

    Captivate 8:  Why am I getting a HTTP 404 Not Found error when I try to preview a responsive project?

    Out of curiosity, some here have recommended renaming an EXE file behind the scenes to eliminate that firewall message when starting up. Are you one of those folks that tried this? My thought is that if so, perhaps this is a result?
    Cheers... Rick

  • Page not found error when  navigating in Iview  application

    Hi,
    I have developed an application,and I am able to view a sucessfull preview of the Page as well.There are htmlb links on the page.When clicked,they navigate to the next jsp page.This iview was assigned to a user,and the portal was logged in though a local ip address.The application works fine.
    In trying to access the portal though an external Url,the initial page comes up perfectly fine.However the next page,does not come up,when a link on the first page is clicked.I get initially a popup with the message:
    "This page contains both Secure and Non secure Items
    .Do you want to display the non secure Items."
    The options on the Popup were yes,no,More Info.
    When I clicked yes then I get the display page not found error.The error is:
    " <b>The page cannot be found
    The page you are looking for might have been removed, had its name changed, or is temporarily unavailable.</b> "
    The Information I get when I click on More Info is-
    <b>Downloading non-secure content from a secure Web site
    The Web site you are viewing is a secure site. It uses a security protocol such as SSL (Secure Sockets Layer) or PCT (Private Communications Technology) to secure the information you send and receive.
    When sites use a security protocol, information that you provide, such as your name or credit-card number, is encrypted so that other people can’t read it. However, this Web page also contains items that do not use this secure protocol.
    Given what you know about this Web site and your computer, you must decide whether to continue working with this site.
    If you do not feel confident about working with this site, click No.</b> "
    This problem occurs only to a particular user.If I add the role to another user,and view the iview I am able to navigate without problem(there is no popup as well).Even for this User,it is happening only when,I access through extrenal url,not when I access the portal through the local IP Address.
    Regards,
    Harish

    Hi,
    This is a further Update.The problem described above has  something to do with the roles.When some roles(cusom) are assigned the navigation occurs.Can you please let me know if there is any role related configuration with SSL.
    Regards,
    Harish

  • Help! 'Page not found error' when use the word 'account' on my web page!

    I have encountered the weirdest problem when making some changes to my website.
    When adding text within the <p></p> tags  everything is fine until I type the word 'account' or 'accounts' then I get a 'page not found' error.
    Any other text can go between those tags, only the word 'account' causes the problem.
    Any ideas?
    (I am using Dreamweaver MX 2004 and its a PHP page)
    I am so confused on this one, so any help would be much appreciated!
    Thanks.

    http://www.reformationassociates.com/ - This is the website, the weirdest part is, it is only happening on pages after they have been opened through Dreamweaver, so it's only once I access them that the problem occurs, I dont have to make any changes, just open them and they suddenly show up as 'page not found'.  
    http://www.reformationassociates.com/archive/Pinnacle.php is one of the pages that was accessed yesterday via Dreamweaver and we have had to change the word to 'acct' to stop the 'page not found' error.
    Afriad I dont know what SSI files are? sorry....
    Thanks.

  • File not found error when tried to open Document ID settings page

    Hi
    when i open sitesettings>site collection administratin >Document
    ID settings
    it shows
    file not found error
    adil

    Hi,
    first we need to figure out the error. change the web.config so that you can see the error on browser
    1) Obtain the complete call stack instead of the default error page:
    <SafeMode MaxControls="200" CallStack="false"/>
    to
    <SChangeafeMode MaxControls="200" CallStack="true"/>
    2) CustomeErrors mode value (in the system.web section) is set to Off:
    <customErrors mode="On">
    to
    <customErrors mode="Off">
    Change these value in "c:\inetpub\wssroot"  CA dirctory web.config and
    C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\TEMPLATE\LAYOUTS\web.config .
    now again try to do the action. you will get the error on screen.
    Whenever you see a reply and if you think is helpful,Vote As Helpful! And whenever you see a reply being an answer to the question of the thread, click Mark As Answer

  • Getting 104 resource not found error, when deploying my first servlet

    Hi,
    I am new to servlets, and after doing little home work i have created a small servlet but i am i getting http 104 resource not found error.
    steps i followed:
    1) installed pre-configured version of tomcat from http://www.coreservlets.com/Apache-Tomcat-Tutorial/.
    2)created new directory called ch1 under webapps, created WEB-INF under ch1
    3)included web.xml, classes in WEB-INF directly
    <?xml version="1.0" encoding="ISO-8859-1"?>
    <web-app xmlns="http://java.sun.com/xml/ns/j2ee"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
    xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee http://java.sun.com/xml/ns/j2ee/web-app_2_5.xsd"
    version="2.5">
    <servlet>
    <servlet-name>Ch1servlet</servlet-name>
    <servlet-class>Ch1servlet</servlet-class>
    </servlet>
    <servlet-mapping>
    <servlet-name>Ch1servlet</servlet-name>
    <url-pattern>/servlet</url-pattern>
    </servlet-mapping>
    </web-app>
    4) included .class file under classes folder from following Ch1servlet.java file, I have set class path to point to servlet-api.jar file and jsp-api.jar and compliled following java file to get .class file which is included in classes folder
    import javax.servlet.*;
    import javax.servlet.http.*;
    import java.io.*;
    public class Ch1servlet extends HttpServlet
    public void doGet(HttpServletRequest request,HttpServletResponse response)throws IOException
    response.setContentType("text/html");
    PrintWriter out=response.getWriter();
    java.util.Date today=new java.util.Date();
    out.println("<html>"+
    "<body>"+
    "<h1 align=center>HF\'s Chapter1 Servlet</h1>"
    +"<br>" + today + "</body>" + "</html>");
    5) I am started tomcat server and when typed http://localhost( changed port from 8080 to 80), its giving tomcat page and not showing any error
    6) When i typed http://localhost/ch1/servlet/Ch1servlet, its giving http 404 error
    type Status report
    message: /servlet/Ch1servlet
    description: The requested resource (/servlet/Ch1servlet) is not available.
    7) i have uncommented(it comes preconfigured) the invoker part in web.xml.
    I have tried including servlet in an package and without package
    I am not sure if its problem with server configuration orelse problem with my file placing.
    Please let me know if you have any idea what went wrong.

    I found this, unable to copy it, so i am typing it:
    Feb11,2008 11:55:57 AM org.apache.catalina.core.AprLifecycleLIstener init
    INFO: The Apache Tomcat Native Library which allows optimal performance in production environemnt was not found on the java.library.path:c:\program Files\Java\jdk1.6.0\bin;....
    last line says
    org.apache.cataline.startup.catalina start
    INfo: Server startup in 657ms

  • File not Found error when synching Ipod

    I have a fairly new Ipod and synced successfully for months, but now iTunes says it cant synch because of a "File not Found error" (no error number or other clues). I'm running the latest iTines and Ipod software, and I've reset USB drivers but still no luck. I cant reset the iPod itself becase I then got a "1418 error", which is why I then reset USB. I'm stuck, has anyone seen this before?
    The Ipod itself plays fine and Itunes recgnises it OK, albeit very slowly, even thought I'm using USB 2.
    One other piece of info; when this first happened, the sync must have first deleted the songs I no longer wanted, prior to unsuccesfully adding new ones. Those old songs show up on the iPod but are skipped when I try to play them.

    Its on the same thread as this one ("connecting iPod nano (second Generation ) to Windows"). Scroll through the authors, you will find it.

  • File not found error when opening securedoc.html

    We are having a sudden issue where recipients of our secure envelope emails will open a message from us with attachments and they will get a "File Not Found" error message.
    We are still using a Post X appliance, but no config changes were made whatsoever and this started happening since last weekend. (Oct. 9-11)
    I did reboot the Post X box and thought the problem was fixed w/ the reboot. I sent a secure message to myself and then opened it along with the attachment and all was good. I sent the second test and the problem was back; "File not found".
    I have noticed that when I get file not found the address bar in my browser is pointing to: https://res.cisco.com/websafe/eo/error?error=notfound
    The time after rebooting when it did work it pointed to file on my local computer hard drive:
    file:///C:/Documents%20and%20Settings/mymachine/Local%20Settings/Temporary%20Internet%20Files/PXTemp/-6pAQ4_Y5hJEmKdQhtG8lhNx0zo!/PX_L_1255377132267.html
    Any ideas what could have caused this sudden issue? How do we resolve? I have a call into support, but they have been researching it all day and our secure mail is down!

    used bridge, didn't work.
    tried right-click, double click..open in program.
    same error.
    files work in other adobe products.....
    only way to get a jpg in there is to "paste" it in.

  • HP Device Not Found Error when trying to print or scan wireless- HP Officejet Pro L7590

    Have had HP Officejet Pro L7590 All-In-One Printer for years.  Always worked fine and I had no issues printing via wireless connection.  Several months ago..  Possibly after a Windows 8 update.  From Windows 8 to Windows 8.1 I have not been able to use the printers wireless feature.  When I try to print or scan it shows the printer as offline.  Also get an error message that tells me "HP Imaging device is not found".  I can still print when connected to USB.  Cannot scan or use features of the HP software suite.  I have tried several times to correct.  Reloading the software and drivers several times, but no success.  I just tried again and was able to print the test page wireless, so got all excited and thought I fixed it.  Then tried to print something and got the same error message I have seen in the past.  I have talked to certain supports saying that it may be a firewall setting within Windows.  Any other suggestions?  Thanks

    Hi @rfjones002,
    Welcome to the HP Support Forums! I see you are not able to print or scan wirelessly to your HP Officejet L7590 and your computer running the Windows 8.1 Operating system. You get a 'Printer offline' or 'HP Imaging device not found' errors.
    I would like you to start with the steps listed below:
    Hold down the Windows Logo key () on the keyboard and the 'R' to open the run box, type %temp%
    Delete all files and folders from the temp folder. Choose skip if any pop ups appear saying any of the files could not be deleted
    Uninstall the software again - Uninstall the Printer Software Instructions
    When the uninstall has completed restart the computer
    Follow these steps to reset the registry settings and options for Windows Installer.
    Hold down the Windows Logo key on the keyboard and the 'R' to open the run box
    In the Open box, type
    msiexec /unregister
    and then click OK.
    Hold down the Windows Logo key on the keyboard and the 'R' to open the run box
    In the Open box, type
    msiexec /regserver
    and then click OK
    *Note: there is a space between the c and the /
    If you have any difficulty with this step, please use this link to perform it another way. Restarting Windows Installer
    Run Disk cleanup from Accessories\ System Tool < How to Delete files using Disk Cleanup
    Download and install the latest version of Adobe flash player http://www.adobe.com/support/flashplayerflashplaye​r/downloads.html
    Perform a clean boot > How to perform a clean boot in Windows
    Download the following SP40669 File Download - if this does not download and or install please proceed to the next step.
    Turn off the Real-Time Scanning and Firewalls; The image below is a McAfee example, if you have a different antivirus program and need help disabling Real-Time Scanning and Firewalls let me know.
    - Image source
    Now you can go ahead and download and install the software here >
    HP Officejet Pro Full Feature Software and Driver
    If you are unable to print a test page, please run the HP Print and Scan Doctor- It was designed by HP to provide users with the troubleshooting and problem solving features needed to resolve many common problems experienced with HP print and scan products connected to Windows-based computers.
    Please let me know if this was successful! I will watch for your reply.
    Thank you,
    HevnLgh
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • Codec Not Found error when trying to render/export layered sequence

    I have a sequence that I never had problems with in the past but as of yesterday when I open the project and try to render or export. I get the infamous dialogue box saying, "Codec not found. You may be using a compression type without the corresponding hardware card."
    I've narrowed it down to only being a problem wherever I have two particular types of media clips layered one on top of the other. In this case it is occurring wherever I have an Apple ProRes 422 (HQ) clip layered with an Animation codec clip containing a graphical bug that was created in After Effects and exported as a Quicktime Movie with RGB+Alpha. Because of the Alpha channel in the bug clip, it is automatically given the Animation codec upon export from After Effects to retain and preserve the transparency needed. I've also narrowed it down to only occurring when all this is combined on a sequence with its compressor set to standard ProRes 422 or ProRes HQ. If I set it to any other codec, such as any DV/DVC Pro or MPEG IMX codec then I can render and export again.
    Also interesting is that I can nest the sequence into another sequence and render and export just fine as well, even with it set to either ProRes codec (which will probably prove to be a suitable workaround for the time being), however, any additional insight into this issue that anyone can provide, pertaining to what may have changed or caused my original sequence to suddenly not want to render anymore would be greatly appreciated.
    And if anyone else reading this comes across this this same type of problem themselves, then I suggest what I just got to work: Duplicate your sequence, then delete the clips from the new sequence and nest the original sequence into it.
    Here is some additional background info if desired:
    I'm using FCP 6.0.6. The sequence I have going here is set to Apple ProRes 422 and consists entirely of Quicktime Movie files. Video Track 1 has the main video clips using the ProRes HQ codec (Again, even with the sequence set to ProRes HQ, it doesn't make any difference here). Track 2 has a graphic bug that was created in After Effects and layered over the Track 1 clips at various places. I was able to work with these clips and render as well as export the sequence with no problems last week. However, I was requested to revise the bug in After Effects, and then replace the old bug with new bug and export the sequence again. So yesterday, I simply opened up the After Effects project file for the bug, made the revisions and exported it with a new name using the same settings as the previous bug. The render problem I'm now facing surfaced right when I opened the FCP project file yesterday, before even importing and replacing the old bug with the new bug. I went ahead and imported the new bug and placed it in place of where the old bug occurred. But the render and problem remained. On this particular problem sequence, I can render the new bug if I actually disable or remove the ProRes clip beneath it, but I cannot in turn render the ProRes clip after disabling/removing the Animation clip above it.
    Now, I can copy either type of clip into their own sequence allowing the clips' respective native settings (ProRes HQ & Animation) to take effect and then they will playback and export just fine. I can even copy the bug clip (Animation codec) and paste it into the other clip's ProRes HQ sequence and it will render and export just fine from there as long as it is placed next to the other clip and not layered over it. On these newer sequences, it is only when the bug (Animation) clip is layered over the ProRes HQ clip with the sequence set to ProRes or ProRes HQ do I tend to still get the "Codec not found" error.
    I've also tried the following steps to try and troubleshoot to no avail:
    1. Copied entire sequence into a new sequence. Problem still occurs.
    2. Closed FCP, trashed preferences, and restarted FCP. Problem still not resolved.
    3. Opened project on another computer, had same problem.

    Thanks for sharing these ideas about dealing with this error message.
    For what it's worth, I finally managed to solve a similar issue by going into sequence settings, choosing the Video Processing tab, and changing Render 10-bit YUV to Render 8-bit YUV.
    Maybe this helps someone?

  • File Not Found error when submitting PDF

    I've created a fillable PDF and set it to send completed submissions to http://www.domain.com/forms/ but I get this error message (even when I changed the folder permissions to 0777 from 0755 for a few seconds):
    Not Found
    The requested URL /forms/ was not found on this server.
    Additionally, a 404 Not Found error was encountered while trying to use an ErrorDocument to handle the request.
    Apache Server at www.domain.com Port 80
    Do I need to make the destination a document (e.g., ending in .html if sending data in HTML format)? What if I'm sending PDFs? I read on Adobe's site:
    If the data returns in FDF or XFDF format, the server URL must end with the #FDF suffix—for example, http://myserver/cgi-bin/myscript#FDF.
    This suggests perhaps that I need to be in cgi-bin and need some kind of script, even though other destination examples end in a slash. Anything you know about this would be appreciated, including permissions.
    Also, I might want the final destination to be on a domain whose site is hosted by WordPress. I don't think that should be an issue, but feel free to share any experience you've had with that.
    The form can be seen at http://profleet.com/FormerEmployeeAuthorizationElectronicMT.pdf if anyone is curious about it. Thank you.

    That makes sense; I just find it counterintuitive that such a big software program wouldn't better spell out what's needed. I'm not the most expert webmaster, but I'm sure Acrobat's audience includes far more casual users.
    I can write HTML and upload pages, but I don't see how that translates to what I need to do in this case. I even tried creating a blank .html page and having Submit send to IT; I have a feeling sending to the folder containing it wouldn't work any better and that I need a script--but despite some experience with scripts, since I'm not privy to Adobe's code, I don't see how I'm supposed to be able to figure out on my own what it is I'm supposed to do and why Adobe doesn't provide some examples. I'll try a search and hope I come up with the right terms.
    Again, I appreciate your input and that of others on this forum--but I mut be missing something when it comes to understanding Adobe and PDFs because I don't normally have to struggle at every turn like this when it comes to other aspects of webmastery.

  • " Path not found() "error when implementing single sign on

    Hi,
    We are implementing single sign on so that when users click on the "Reports Login" he is navigated to the obiee presentation services screen. For the reports login we have a .asp page which directs to the presentation services.
    I have done the necessary changes in the instanceconfig and credentialstore xml files.
    I have been receiving a strange error when I click on the reports login. I get the error
    Path not found ()
    Error Details
    Error Codes: U9KP7Q94
    I have checked the presentation server log file and I see the below error
    Type: Error
    Severity: 45
    Time: Tue Mar 09 09:18:44 2010
    File: project/websubsystems/ssportal.cpp Line: 1907
    Properties: ThreadID-2672;HttpCommand-Dashboard;Proxy-;RemoteIP-127.0.0.1;User-;Impersonator-
    Location:
         saw.subsystem.portal
         saw.httpserver.request
         saw.rpc.server.responder
         saw.rpc.server
         saw.rpc.server.handleConnection
         saw.rpc.server.dispatch
         saw.threadPool
         saw.threads
    Path not found ()
    Can anyone provide me an input how to resolve this issue?
    This is bit urgent for me.
    Thanks

    Hi,
    Please ensure that the navigational attribute is checked at the attribute level and also at the Infocube level and also check that correct mapping of this navigational attribute is done at the Multiprovider level.
    Thanks,
    Venkat

  • HTTP 404 Not Found Error when using htp.anchor

    Hi All,
    We have customized hire flow and Oracle aplication 11i and added some HTML pages from PL/SQL. We are receiving "HTTP 404 Not Found Error" intermittently when clicking on submit button to go to the next page. If we close the browser and perform the same transaction it is working fine.
    Can you please help us in troubleshooting this issue.
    Thanks & Regards,
    Veerababu.

    If you are using Apache, check the error log for more details about the 404. If you are using EPG, there are similar logs somewhere but I can't tell you where off-hand.
    Scott

Maybe you are looking for

  • PHOTO IS NOT GETTING REFLECTED IN ADOBE FORM

    Hi experts We have tried the below code to dispaly photo in webdynpro integrated with adobe forms CALL FUNCTION 'HR_IMAGE_EXISTS'     EXPORTING       p_pernr                     = v_obj_id *     P_TCLAS                     = 'A' *     P_BEGDA        

  • Palm Pre2 email connection

    Hi, I have a Palm Pre2.  It accesses the internet every 10 minutes.  I think this is to check for new email and/or updates.  It is costing me £1.50 a day.  How do I turn it off?  I have a wi-fi connection at home.  I have set the phone up to connect

  • Correspondence by mail

    Hi, Could anybody tell me the process for sending mail for account statement. Actually the scenario is Whenever any entry get hit in employee account (created as vendor in the system) they should be informed by mail. At the time of making any entry t

  • HT1751 Where to look for backup files on computer?

    need my back up information but cannot seem to find it on my computer. Where am i suppose to look for it?

  • Java -jar works, javaw does not

    I have a client who is unable to launch a jar from the desktop with javaw but if I type in the command line java - jar thejar.jar it works fine. They originally had jars associated with PKzip. I changed the program association (its an XP machine by t