Iw22 is giving dump

hi,
Standard PM Transaction IW22 is giving dump the use entered the correct data. There is a select statment from table VIQMEL(notification header),to fetch data from this table it's taking lot of time and going to dump.This select statment is in FM BREAKDOWN_NOTIFS_READ_F04 and program name is SAPLMCI1. I Searched Service market palce and i not found any suitable notes for this dump. Earlier it worked fine from fast few days it's giving dump. If any body faced these kind of problem please kindly give the solution. There are no customization errors.
Thanks and Regards,
Surendar Reddy.

The problem is that there's too much data. If it was working before, and has only recently stopped, this would imply it's taking too long, because the data volumes have grown.
I'd log a call with SAP.
As a short-term measure, ask your basis people to increase the timeout parameter. Or use the transaction with less data selected, if possible.
matt

Similar Messages

FM ARCHIVE_SCHEDULE_JOB giving dump as background job?

Hello Everyone,
I am scheduling a report in SM37 which consists of FM ARCHIVE_SCHEDULE_JOB.
And based on the output of FM, some Ztables are updated and some jobs are created in sm37.
Now, when i debugged the background job, i found out that Fm is giving Dump 'NO_RUNTIME_INFO' since sy-batch is not initial.
Due to which Ztables are not updated but the jobs are created....
Can anyone please help me what should i do on this case?
Edited by: Suruchi Razdan on Jun 2, 2011 9:45 AM

Hi Akshay,
II have copied the Std workflow WS20000075 into a custom one and in the latest end tab, i have selected "Workitem creaton" for Refer Date/Time field and given 5 mins. I have deactivated the workflow in which i have created the containers for date and time and used "Expresion" for latest end and also commented the zmethod in delegated object. Even now also the job is getting cancelled with the same error.
Any idea why is it happening ?
regards,
Trimurty

While Creating Implicit enhancement system is giving dump

Hello All,
I am enhanceing standard code with the help of implicit enhancement.. I have done successfully in one system but when i try to do it in other system it is giving me short dump.. And the dump also didn't give any information..
I am working on ECC 6.0 and i assume we can use implicit enhancement points...
Kindly let me know why i am getting dump..
This is what dump says..
The exception 'CX_SY_MESSAGE_ILLEGAL_TEXT' was raised, but it was not caught
anywhere along
the call hierarchy.
What happened?
Since exceptions represent error situations and this error was not
adequately responded to, the running ABAP program
'CL_MESSAGE_HELPER=============CP' has to be
terminated.
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_MESSAGE_ILLEGAL_TEXT', was not
caught in
procedure "ACTION" "(FORM)", nor was it propagated by a RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
The text parameter in MESSAGE cannot be an initial reference
METHOD set_msg_vars_for_if_t100_msg.
IF text IS INITIAL.
RAISE EXCEPTION TYPE cx_sy_message_illegal_text
EXPORTING textid = cx_sy_message_illegal_text=>initial_ref.
ENDIF.
Thanks all for your help.
Regards,
Raj

Hi,
This is for SE16N transaction code.. Even i tried in SE38 for a custom program but still giving dump..
So this is not an issue with particular transaction but somehow getting dump ..I doono if there is any OSS notes to be implemented...
Regards,
Raj

Transaction CU72 is giving dump

Hi,
Transaction CU72 is giving dump in Ecc5.0 where its working in 4.6b.we r upgrading from 4.6b to Ecc5.0.
The call to the function module "CTCV_TRANSLATE_TO_USER_MASK" is incorrect:
The function module interface allows you to specify only fields of a particular type under "IV_DEC_SEP".The field "DECIMALPOINT" specified here is a different field type
Thanks and Regards

whats the type of DECIMALPOINT, it has to be char1. if its still giving problem declare like below.
data: DECIMALPOINT type SYCHAR01 .
Regards
Raja

Dynamic data select from table is giving dump

Hello Experts,
 Below statement is giving Dump after it move all the data in my dynamic table.
When i see in debug. All my recored are avilable in <T_TAB> Table.
SELECT * FROM (pa_tab) INTO CORRESPONDING FIELDS OF TABLE <T_TAB>.
> IF SY-SUBRC = 0.
Information on where terminated
The termination occurred in the ABAP program "ZFIR_ZTABLE_UPLOAD" in
"F_DOWNLOAD".
The main program was "ZFIR_ZTABLE_UPLOAD ".
The termination occurred in line 403 of the source code of the (Include)
program "ZFIR_ZTABLE_UPLOAD"
of the source code of program "ZFIR_ZTABLE_UPLOAD" (when calling the editor
4030).
Processing was terminated because the exception "CX_SY_OPEN_SQL_DB" occurred in
the
procedure "F_DOWNLOAD" "(FORM)" but was not handled locally, not declared in
the
RAISING clause of the procedure.
The procedure is in the program "ZFIR_ZTABLE_UPLOAD ". Its source code starts
in line 399
of the (Include) program "ZFIR_ZTABLE_UPLOAD ".
please help me.
Regards,
Amit
Message was edited by:
 Amit Gupta

Hi Amit,
Check if you are doing the following in your program
FIELD-SYMBOLS <T_TAB> TYPE STANDARD TABLE.
DATA: g_tabref type ref to data. "Reference to your table structure
CREATE DATA g_tabref type standard table of (pa_tab).
ASSIGN g_tabref->* to <T_TAB>.
SELECT * FROM (PA_TAB) INTO TABLE <T_TAB>.
Hope this solves your problem.
Let me know if you require any further info.
Enjoy SAP. Reward points of useful
Rajasekhar

Report (uses LDB's) giving dump due to memory problem

Hi,
I have a report which is giving dump in production due to memory problem.
Memory is increased from basis part,but still getting same error.
the report uses Logical DataBases.
Can anyone suggest solution to solve this problem.
regards
Mallik

Hi Amit,
thanks for ur quick reply and ur idea "make changes in development and write the logic to read records in chunks".
I have n't worked on LDB's till now.So i Don't know how I can read the data in chunks from LDB's.
Can u Plz give some idea how to read data in chunks.
Iam also sending the code,if possible ,plz go thru it and give me some idea.
Hope u will help me.
CODE.
REPORT ZAROP028
ABLES: PROJ, " Project definition
 PRPS_R, " WBS element
 PRPS, " WBS elements
 TJ02T, " System Status Values
 TCJ1, " Project Types
 JEST, " Active System Status
 COSP1, " cost totals - external postings
 COSS1, " cost totals - internal postings
 COVP11, " Line Items by Prd & Doc Header
 COVP12, " Line Items by Prd & Doc Header
 BHDGD, " Page heading table.
 AUFK, " Order Master Data for WBS (LDB)
 ANEP, " Asset line item
 COBRB, "Distribution Rules Settlement Ru
 SETHIER, "Hierarchy Structure
 TKA02, "Controlling Area Assignment
 CEPC, "Profit Center Master Data
 PSDYPD, "Dummy struct for GET proj late
 PSDYPR, "Dummy struct for GET PRPS_R late
 PSDYNP. "Dummy struct for GET AUFK late
CONSTANTS:
 C_E TYPE C VALUE 'E',
 C_I TYPE C VALUE 'I',
 C_N TYPE C VALUE 'N',
 C_X TYPE C VALUE 'X',
 C_Y TYPE C VALUE 'Y',
 C_NE(2) TYPE C VALUE 'NE',
 C_EQ(2) TYPE C VALUE 'EQ',
 C_USD(3) TYPE C VALUE 'USD',
 C_04(2) TYPE C VALUE '04',
 C_I0046(5) TYPE C VALUE 'I0046'
various working storage
DATA:
 W_TXT04(4) TYPE C. " make status uppercase
DATA: ACTIVE(1) TYPE C VALUE 'A', " type for status_flag
 INACTIVE(1) TYPE C VALUE 'I', " type for status_flag
 STATUS_FLAG(1) TYPE C VALUE 'I', " wbs active or inactive?
 INACTIVEDT LIKE SY-DATUM, " inactive date for wbs
 REC_FLAG TYPE C VALUE 'N', " records retrieved?
 DAYS_INACTIVE TYPE I, " days wbs has been inac
 W_LOWINACT TYPE I, " smallest inactive days
 WBS_CNT TYPE I, " cnt for wbs in status
 W_AUC_COST TYPE P DECIMALS 2, " unsettled auc cost
 W_VNAME LIKE PRPS_R-VNAME. " venture number storage
DATA: BEGIN OF ITAB OCCURS 0, "MELI-5F2KMH
 COMPCODE LIKE PROJ-VBUKR, " company code
 PLANT LIKE PROJ-WERKS, " plant
 PROJECT LIKE PROJ-PSPID, " project
 NAME LIKE PROJ-POST1, " project description
 DINACT TYPE I, " days proj inactive
 PRCTR LIKE PROJ-PRCTR, " profit center
 SETID LIKE SETHIER-SETID, " level 2 pc hier
 DESCRIPT LIKE SETHEADERT-DESCRIPT,
 VERNA LIKE PROJ-VERNA, " person responsible
 AUC TYPE P DECIMALS 2, " AUC unsettled amount
 END OF ITAB.
DATA: BEGIN OF I_INACT OCCURS 0,
 STAT LIKE JEST-STAT,
 INACT LIKE JEST-INACT,
 END OF I_INACT.
DATA: EQ_FLAG TYPE C, " system status flag
 NE_FLAG TYPE C. " system status flag
TYPES: BEGIN OF T_COSTS,
 PSPID LIKE PROJ-PSPID,
 BUDAT LIKE COVP11-BUDAT,
 END OF T_COSTS.
DATA: I_PROJ LIKE PROJ OCCURS 0 WITH HEADER LINE,
 I_PRPS_R LIKE PRPS_R OCCURS 0 WITH HEADER LINE,
 I_COSTS TYPE T_COSTS OCCURS 0 WITH HEADER LINE.
DATA: W_RECORDS TYPE I.
DATA: FOUND_FLAG TYPE C. " CHAD-4PRPDE
DATA: BEGIN OF I_HIER OCCURS 0. "FEAT-5BNRRP
 INCLUDE STRUCTURE SETHIER. "FEAT-5BNRRP
DATA: END OF I_HIER. "FEAT-5BNRRP
RANGES: R_TJ02T FOR TJ02T-ISTAT.
DATA: W_LVL2 LIKE SETHIER-SETID. "MELI-5F2KMH
SELECTION-SCREEN BEGIN OF BLOCK PROJECT WITH FRAME TITLE TEXT-B01.
PARAMETERS: P_BUDAT LIKE COVP11-BUDAT,
 DAYINACT(3) TYPE N DEFAULT '090'.
SELECTION-SCREEN SKIP. "FEAT-5BNRRP
PARAMETERS: P_PC-SET LIKE CEPC-KHINR OBLIGATORY "FEAT-5BNRRP
 DEFAULT 'SCH_STREAM'. "FEAT-5BNRRP
SELECTION-SCREEN END OF BLOCK PROJECT.
SELECTION-SCREEN BEGIN OF BLOCK SORT WITH FRAME TITLE TEXT-B02.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(13) TEXT-C01.
SELECTION-SCREEN POSITION 15.
PARAMETERS: P_PLANT RADIOBUTTON GROUP SORT DEFAULT 'X'.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(13) TEXT-C03. "FEAT-5BNRRP
SELECTION-SCREEN POSITION 15.
PARAMETERS: P_PRCTR RADIOBUTTON GROUP SORT. "FEAT-5BNRRP
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(13) TEXT-C04.
SELECTION-SCREEN POSITION 15.
PARAMETERS: P_DAYS RADIOBUTTON GROUP SORT.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK SORT.
AT SELECTION-SCREEN OUTPUT.
PERFORM USER_PARM_INIT.
AT SELECTION-SCREEN.
PERFORM CHECK_PROJ_CRITERIA.
START-OF-SELECTION.
PERFORM BUILD_PC_HIER USING P_PC-SET.
Project Definition *
GET PROJ.
MOVE-CORRESPONDING PROJ TO I_PROJ. "MELI-5F2KMH
APPEND I_PROJ. "MELI-5F2KMH
CLEAR I_PROJ.
WBS element table
GET PRPS_R.
MOVE-CORRESPONDING PRPS_R TO I_PRPS_R.
APPEND I_PRPS_R.
CLEAR I_PRPS_R.
GET all order and cost objects associated with order and elements
GET AUFK.
GET COSP1.
CHECK COSP1-WRTTP EQ C_04. " check if value type '04'
Get last date that the wbselement was updated and determine status
GET COVP11.
MOVE PROJ-PSPID TO I_COSTS-PSPID.
MOVE COVP11-BUDAT TO I_COSTS-BUDAT.
APPEND I_COSTS.
CLEAR I_COSTS.
Loop through Internal cost statements
GET COSS1.
CHECK COSS1-WRTTP EQ C_04. " if value type is 04
Get last date that the wbselement was updated and determine status
GET COVP12.
MOVE PROJ-PSPID TO I_COSTS-PSPID.
MOVE COVP12-BUDAT TO I_COSTS-BUDAT.
APPEND I_COSTS.
CLEAR I_COSTS.
END-OF-SELECTION.
PERFORM BUILD_TABLE.
DELETE ITAB WHERE DINACT < DAYINACT.
DESCRIBE TABLE ITAB LINES W_RECORDS.
IF W_RECORDS = 0.
 MESSAGE I024.
ENDIF.
PERFORM WRITE_REPORT.
 FORM CHECK_PROJ_CRITERIA *
This form verifies correct selection criteria has been entered from *
the selection screen inputs. If incorrect data has been entered the*
valid information messages are displayed. *
FORM CHECK_PROJ_CRITERIA.
check for either posting date or inactivity criteria but not both
IF NOT P_BUDAT IS INITIAL AND NOT DAYINACT IS INITIAL.
 MESSAGE E119.
ENDIF.
IF NOT DAYINACT IS INITIAL. "check s/o day inactive
 IF NOT DAYINACT <= 998.
 MESSAGE E018.
 ELSE.
 INACTIVEDT = SY-DATUM - DAYINACT.
 ENDIF.
if days inactive is initial set INACTIVEDT using the posting date
ELSE.
 INACTIVEDT = P_BUDAT.
ENDIF.
ENDFORM. " CHECK_PROJ_CRITERIA
 FORM GET_AUC_COSTS *
This form retrieves AUC costs for records based on AUFK2 where they *
meet project criteria. This pulls the unsettled amount on a AUC as *
a settlement receiver. *
FORM GET_AUC_COSTS USING F_OBJNR F_BUKRS.
CONSTANTS:
 C_SETLEMENT_ANNUAL LIKE COBRB-PERBZ VALUE 'JHR', "Annual Settlement
 C_DEP_AREA_STD LIKE ANEP-AFABE VALUE '01'. "Std depreciation
DATA: L_ANLC LIKE ANLC OCCURS 0 WITH HEADER LINE,
 L_ANLCV LIKE ANLCV OCCURS 0 WITH HEADER LINE,
 BEGIN OF L_COBRB OCCURS 0, "SRIN-6ZNEAR
 ANLN1 LIKE COBRB-ANLN1,
 ANLN2 LIKE COBRB-ANLN2,
 END OF L_COBRB,
 F_H_COST TYPE P DECIMALS 2.
SELECT ANLN1 ANLN2 FROM COBRB
 INTO TABLE L_COBRB " SRIN-6ZNEAR
 WHERE OBJNR = F_OBJNR
 AND PERBZ = C_SETLEMENT_ANNUAL.
IF SY-SUBRC NE 0. " gary-463qbd
 EXIT. " gary-463qbd
ENDIF. " gary-463qbd
LOOP AT L_COBRB. " gary-463qbd
CLEAR: F_H_COST.
SELECT SINGLE * FROM ANLC
 INTO L_ANLC
 WHERE BUKRS = F_BUKRS AND
 ANLN1 = L_COBRB-ANLN1 AND
 ANLN2 = L_COBRB-ANLN2 AND
 GJAHR = SY-DATUM(4) AND
 AFABE = C_DEP_AREA_STD AND
 ZUJHR = '0000' AND
 ZUCOD = '0000'.
 IF SY-SUBRC = 0.
 CALL FUNCTION 'FI_AA_VALUES_CALCULATE'
 EXPORTING
 I_ANLC = L_ANLC
 IMPORTING
 E_ANLCV = L_ANLCV.
 F_H_COST = L_ANLCV-BCHWRT_LFD.
 ENDIF.
ADD: F_H_COST TO W_AUC_COST.
ENDLOOP. " gary-463qbd
ENDFORM. " GET_AUC_COSTS
 FORM CHECK_INACTIVE_DATE *
This form checks the computed inactive date based on the formal *
parameter DAYS_INACTIVE. If DAYS_INACTIVE is more current than the *
current lowest inactive date W_LOWINACT then W_LOWINACT is replaced *
with this value. *
FORM CHECK_INACTIVE_DATE USING DAYS_INACTIVE.
IF DAYS_INACTIVE < W_LOWINACT.
 MOVE DAYS_INACTIVE TO W_LOWINACT.
ELSEIF W_LOWINACT EQ 0.
 MOVE: DAYS_INACTIVE TO W_LOWINACT,
 W_LOWINACT TO ITAB-DINACT.
ENDIF.
ENDFORM. " CHECK_INACTIVE_DATE
 FORM build_table *
collect fields to the internal table ITAB *
FORM BUILD_TABLE.
SORT I_COSTS BY PSPID ASCENDING BUDAT DESCENDING.
LOOP AT I_PROJ.
 CLEAR W_AUC_COST.
 READ TABLE I_COSTS WITH KEY PSPID = I_PROJ-PSPID
 BINARY SEARCH.
 IF SY-SUBRC = 0.
 ITAB-DINACT = SY-DATUM - I_COSTS-BUDAT.
 ELSE.
 ITAB-DINACT = SY-DATUM - I_PROJ-ERDAT.
 ENDIF.
 LOOP AT I_PRPS_R WHERE PSPHI = I_PROJ-PSPNR AND
 BELKZ = 'X'.
 IF NOT I_PRPS_R-IMPRF IS INITIAL.
 PERFORM GET_AUC_COSTS USING I_PRPS_R-OBJNR
 I_PRPS_R-PBUKR.
 ELSE.
 CONTINUE.
 ENDIF.
 ENDLOOP.
 ITAB-COMPCODE = I_PROJ-VBUKR.
 ITAB-PLANT = I_PROJ-WERKS.
 ITAB-PROJECT = I_PROJ-PSPID.
 ITAB-NAME = I_PROJ-POST1.
 ITAB-PRCTR = I_PROJ-PRCTR.
 ITAB-VERNA = I_PROJ-VERNA.
 ITAB-AUC = W_AUC_COST.
 IF ITAB-DINACT > DAYINACT.
 PERFORM GET_HIER_INFO.
 ENDIF.
 APPEND ITAB.
 CLEAR ITAB.
ENDLOOP.
ENDFORM. " BUILD_TABLE
 FORM STATUS_CHECK *
Checks the active status of the project definition for the *
parameter values assigned. *
FORM STATUS_CHECK USING F_OBJNR.
begin of GARY-463QBD
CLEAR: I_INACT.
REFRESH: I_INACT.
MOVE: C_N TO EQ_FLAG,
 C_Y TO NE_FLAG.
retrieve status for a given record
SELECT STAT INACT
 INTO TABLE I_INACT
 FROM JEST
 WHERE OBJNR EQ F_OBJNR AND
 INACT NE C_X.
sort internal status entered by user
SORT R_TJ02T BY OPTION DESCENDING.
check all current object statuses meet user entered criteria
LOOP AT R_TJ02T WHERE OPTION EQ C_NE.
check for user selected options
 READ TABLE I_INACT WITH KEY STAT = R_TJ02T-LOW.
 IF SY-SUBRC EQ 0.
 MOVE C_N TO NE_FLAG.
 EXIT.
 ENDIF.
ENDLOOP.
LOOP AT R_TJ02T WHERE OPTION EQ C_EQ.
check for user selected options
 READ TABLE I_INACT WITH KEY STAT = R_TJ02T-LOW.
 IF SY-SUBRC EQ 0.
 MOVE C_Y TO EQ_FLAG.
 EXIT.
 ENDIF.
ENDLOOP.
check for no statuses entered as EQ option
LOOP AT R_TJ02T WHERE OPTION EQ C_EQ.
 EXIT.
ENDLOOP.
if so move c_y to eq_flag
IF SY-SUBRC NE 0.
 MOVE C_Y TO EQ_FLAG.
ENDIF.
if both eq_flag or ne_flag are true(c_y) move true to valid_flag
IF ( EQ_FLAG EQ C_N OR
 NE_FLAG EQ C_N ).
 REJECT 'PRPS_R'.
ENDIF.
end of GARY-463QBD
ENDFORM. " STATUS_CHECK
 Form WRITE_REPORT
FORM WRITE_REPORT.
IF P_PLANT EQ 'X'.
SORT ASCENDING BY ITAB-BUSAREA "FEAT-5BNRRP
 SORT ITAB ASCENDING BY PLANT
 PROJECT.
ELSEIF P_PRCTR EQ 'X'.
 SORT ITAB ASCENDING BY PRCTR "FEAT-5BNRRP
 PROJECT.
ELSE.
 SORT ITAB ASCENDING BY DINACT
 PROJECT.
ENDIF.
FORMAT COLOR COL_BACKGROUND INTENSIFIED ON.
 "MELI-5F2KMH
LOOP AT ITAB. "MELI-5F2KMH
 WRITE: / ITAB-COMPCODE,
 9(4) ITAB-PLANT,
 17(12) ITAB-SETID,
 33(40) ITAB-DESCRIPT,
 77(10) ITAB-PRCTR,
 91(24) ITAB-PROJECT,
 119(40) ITAB-NAME,
 163(25) ITAB-VERNA,
 192(15) ITAB-AUC CURRENCY C_USD,
 211(8) ITAB-DINACT.
ENDLOOP.
ENDFORM. " WRITE_REPORT
 Form USER_PARM_INIT
Initializes user parameter settings
FORM USER_PARM_INIT.
ENDFORM. " USER_PARM_INIT
At top of every page, generate Amoco-standard header.
TOP-OF-PAGE.
MOVE: '0' TO BHDGD-INIFL,
 SY-LINSZ TO BHDGD-LINES,
 SY-UNAME TO BHDGD-UNAME,
 SY-REPID TO BHDGD-REPID,
 SY-TITLE TO BHDGD-LINE1,
 SPACE TO BHDGD-DOMAI,
 SPACE TO BHDGD-SEPAR,
 SPACE TO BHDGD-MIFFL.
IF P_PLANT EQ 'X'.
 MOVE TEXT-H01 TO BHDGD-LINE2.
ELSE.
 MOVE TEXT-H03 TO BHDGD-LINE2. "FEAT-5BNRRP
ENDIF.
temporarily clear sy-mandt to remove "europe" from header "FEAT-5BNRRP
DATA: W_MANDT LIKE SY-MANDT.
BHDGD-BUKRS = SPACE.
W_MANDT = SY-MANDT.
CLEAR SY-MANDT.
FORMAT COLOR COL_BACKGROUND INTENSIFIED OFF.
PERFORM BATCH-HEADING(RSBTCHH0).
FORMAT RESET.
reset sy-mandt "FEAT-5BNRRP
SY-MANDT = W_MANDT.
PERFORM PGH_WRITE_HEADING USING TEXT-003 INACTIVEDT. "MELI-5F2KMH
SKIP 1.
ULINE.
write heading info
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE: /1(5)'CCode',
 9(5)'Plant',
 17(12)'Level 2 Node',
 33(40)'Level 2 Node Description',
 77(10)'Profit Ctr',
 91(18)'Project Definition',
 119(19)'Project Description',
 163(18)'Person Responsible',
 192(15)' AUC Unsettled',
 211(13)'Days Inactive'.
end FEAT-5BNRRP
BEGIN FEAT-5BNRRP NEW FORMS
FORM BUILD_PC_HIER
FORM BUILD_PC_HIER USING SETID.
DATA: W_SETID LIKE SETHIER-SETID,
 W_NEWSETID LIKE SETHIER-SETID.
CONCATENATE '0H' SETID INTO W_SETID.
CALL FUNCTION 'G_SET_GET_ID_FROM_NAME'
 EXPORTING
 SHORTNAME = W_SETID
 TABNAME = 'GLPCT'
 SETCLASS = '0106'
 SUPRESS_POPUP = 'X'
 OLD_SETID = W_NEWSETID
 IMPORTING
 NEW_SETID = W_NEWSETID.
CALL FUNCTION 'G_SET_TREE_IMPORT'
 EXPORTING
 CLIENT = SY-MANDT
 LANGU = SY-LANGU
 SETID = W_NEWSETID
 TABNAME = 'GLPCT'
 TABLES
 SET_HIERARCHY = I_HIER
 EXCEPTIONS
 SET_NOT_FOUND = 1
 ILLEGAL_FIELD_REPLACEMENT = 2
 ILLEGAL_TABLE_REPLACEMENT = 3
 OTHERS = 4.
CLEAR I_HIER.
ENDFORM.
FORM GET_HIER_INFO
FORM GET_HIER_INFO.
DATA: W_SETID LIKE SETHIER-SETID,
 W_KHINR LIKE CEPC-KHINR,
 W_INDEX TYPE I.
CLEAR: W_SETID,
 W_KHINR,
 W_INDEX.
DETERMINE PROFIT CENTER NODE
SELECT SINGLE KHINR
 FROM CEPC
 INTO W_KHINR
 WHERE PRCTR EQ ITAB-PRCTR.
CONCATENATE '0106' I_PROJ-VKOKR W_KHINR
 INTO W_SETID.
READ TABLE I_HIER WITH KEY
 SETID = W_SETID.
IF SY-SUBRC EQ 0.
 W_INDEX = SY-TABIX.
 DO.
 READ TABLE I_HIER INDEX W_INDEX.
 IF W_INDEX = 0.
 ITAB-SETID = 'Not Found'.
 EXIT.
 ENDIF.
 IF I_HIER-LEVEL = 1.
 ITAB-SETID = I_HIER-SETID+8(12).
 ITAB-DESCRIPT = I_HIER-DESCRIPT.
 EXIT.
 ENDIF.
 IF I_HIER-LEVEL = 2.
 ITAB-SETID = I_HIER-SETID+8(12).
 ITAB-DESCRIPT = I_HIER-DESCRIPT.
 EXIT.
 ENDIF.
 W_INDEX = W_INDEX - 1.
 ENDDO.
ELSE.
 ITAB-SETID = 'Not Found'.
ENDIF.
ENDFORM.
END FEAT-5BNRRP NEW FORMS
*& Form PGH_WRITE_HEADING WR MELI-5F2KMH
FORM PGH_WRITE_HEADING USING L_V1 L_V2.
DATA: L_LINSZ LIKE SY-LINSZ.
DATA: L_TITLEL LIKE SY-TABIX.
DATA: L_START LIKE SY-TABIX.
DATA: L_DATE LIKE SY-DATUM.
DATA: L_FORMATTED_DATE(10) TYPE C.
DATA: L_TITLE(27) TYPE C.
MOVE L_V2 TO L_DATE.
WRITE L_DATE TO L_FORMATTED_DATE.
CONCATENATE L_V1 L_FORMATTED_DATE INTO L_TITLE
 SEPARATED BY SPACE.
L_LINSZ = SY-LINSZ.
L_TITLEL = STRLEN( L_TITLE ).
L_START = ( L_LINSZ / 2 ) - ( L_TITLEL / 2 ) - 2.
NEW-LINE.
POSITION L_START.
WRITE: L_TITLE.
regards
Mallik

Office 2007 Attachments giving dump"Buffer table not up to date" in SOCO

Hi SRM Experts,
We have came across a strange issue. DOCX & XLSX doc type attachments are giving a dump " Buffer Table not up to the date" when the Buyer in SOCO press the button "Add to the work area".
This is coming only when there is some SPECIAL CHARACTER used in the description of the attachment e.g. _, -, . / etc etc.
The other attachment types are working fine. i.e. PDF or Doc with NO special characters used in the description are giving NO errors t
IS there any special OSS note for this?
I have already configured all the config settings in DC10, DC20 & DC 30.
Please help us out in this.
Regards,
Varun.

Hi Muthu,
Thanks for the help.. But here the problem is not with extension only.
The problem is if there is a special character in the attachment description in Office 2007 doc types like XLSX, DOCX then and then only it is giving dump.
I tested without special characters in description with DOCX file it is working fine.
Please help out as this is becoming serious issue now.
Regards,
Varun

Using NAST WITH DATE RANGE THE ZPROGRAM GIVING DUMP

Hi Frineds,
i am writing select query from NAST table for PO created time based on date range more than 10 days the program is giving DUMP in Quality System.. but in Developement system the dump is not coming for same date range.
please see the below code......that i ahve written. help me.
IF SY-SUBRC EQ 0.
    SELECT KAPPL
       OBJKY
       KSCHL
       SPRAS
       ERDAT
       ERUHR
       FROM NAST
       INTO TABLE IT_NAST
        WHERE KAPPL = 'EF' AND
              OBJKY IN R_OBJKY AND
               KSCHL IN S_KSCHL
              AND ERDAT IN S_DATE
              AND ERUHR IN S_ERUHR.
    SORT IT_NAST BY OBJKY.
    DELETE ADJACENT DUPLICATES FROM IT_NAST COMPARING OBJKY.
ENDIF.
ENDIF.
regards,
Vijay
Edited by: Rob Burbank on Jan 21, 2010 12:42 PM

Hi,
thanks for your mail..
the dump message
There is no help text for this dump
Either the text was inadvertently deleted or the release of
the kernel differs from the release of the database
Refer to the Note system for further information on            this dump.
Regards,
Vijay

Assign base too short giving dump

Hi,
 I am facing problem ,when i try to assign im_value(type any) to field symbol
<value> TYPE domvalue_l. its giving short dump.i tried casting also,but still
giving dump.i cant define fieldsymbol also of type any because i need to pass it to
a function module to i_domvalue ,which i have shown below..Anybody plz help.
define local field symbol
FIELD-SYMBOLS <value> TYPE domvalue_l.
check precondition
CHECK: im_domain IS NOT INITIAL,
 im_value IS NOT INITIAL.
assign value which shall be check to field symbol (because of ANY)
TRY.
 ASSIGN im_value TO <value> casting.
 CATCH cx_root. "#EC CATCH_ALL
 RAISE EXCEPTION TYPE cx_mmpur_root.
ENDTRY.
call check function module
CALL FUNCTION 'DOMAIN_VALUE_GET'
 EXPORTING
 i_domname = im_domain
 i_domvalue = <value>
 EXCEPTIONS
 not_exist = 1
 error_message = 2
 OTHERS = 3.
CHECK sy-subrc <> 0.
message is available from domain value check
RAISE EXCEPTION TYPE cx_mmpur_message.
Regards,
Tess

Hi,
try the following code..
define local field symbol
FIELD-SYMBOLS <value> TYPE domvalue_l.
check precondition
data : tem type domvalue_l.
CHECK: im_domain IS NOT INITIAL,
im_value IS NOT INITIAL.
assign value which shall be check to field symbol (because of ANY)
TRY.
temp = im_value.
ASSIGN temp TO <value> casting.
CATCH cx_root. "#EC CATCH_ALL
RAISE EXCEPTION TYPE cx_mmpur_root.
ENDTRY.
call check function module
CALL FUNCTION 'DOMAIN_VALUE_GET'
EXPORTING
i_domname = im_domain
i_domvalue = <value>
EXCEPTIONS
not_exist = 1
error_message = 2
OTHERS = 3.
CHECK sy-subrc <> 0.
message is available from domain value check
RAISE EXCEPTION TYPE cx_mmpur_message.
Regards,
Aparna

CN71 is giving dump

Hi,
I am creating version in cn72. when I am displaying it in cn71,it is giving dump.
In cn71 , I am giving project,then choosing DB profile and clicking version data and sales data and then enter.Then in the project version I am giving the version that I have created in CN72.And when I execute it, it is giving dump.
The error analysis(in the dump) :
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_DYNAMIC_OSQL_SEMANTICS', was
not caught in
procedure "SELECT_VBAK_FOR_ITAB_VBELN" "(FORM)", nor was it propagated by a
RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
An Open SQL clause was specified dynamically. The contained field name
"CRM_GUID" does not exist in any of the database tables from the FROM clause.
Please help.
Thanks in advance.

Sounds like a problem in SAP standard code, did you check for SAP notes?
Thomas

Email program giving Dump

I'm using the function module SO_DOCUMENT_SEND_API1
and after that I'm using this command.
SUBMIT rsconn01 WITH mode = 'INT'
WITH output = 'X'
AND RETURN.
But it is giving Dump. Says Error when calling a remote function call. RFC_GET4 I'm getting this error.
I'm recieving the mail to SAP inbox.
But when I give any other External ID mail is not coming.
Is it that do i need to do any settings?

Hi Phani ,
External Mails means ? ur outlook id ? thats y we given ref of SCOT, where u can check the status of Messages.
check ur address nodes configurations.
Regards
prabhu

Dadatasouce 0TCT_DS22 giving dump in delta load.(

H Experts,
I have Initialised technical datasource 0TCT_DS22 and immidiately wants to fetch delta but it's giving dump.
TSV_TNEW_PAGE_ALLOC_FAILED. This seems to be internal memory problem ,but after initalisation it shouldn't throw this dump.What may be another reason?
When should one go for technical content data loading?is it during normal loads?or later?
Thanks
Girish

Hi,
As Neetika mentioned, it is due to large data volume.
Please check with the basis team to get reduced the jobs scheduled for this activity or try to extract the relevant data by providing any filters if possible.
Regards,
Geeta

Method CL_FAGL_OI_READ giving dump

Hi,
     method giving dump when i m trying to use it.
st 22 stmt.
In program "CL_FAGL_OI_READ===============CP ", the following syntax error
occurred
in the Include "CL_FAGL_OI_READ===============CU " in line 25:
"Field "ABAP_FALSE" is unknown. It is neither in one of the specified t"
"ables nor defined by a "DATA" statement. "DATA" statement."
please suggest me the solution
Regards
Sumit

dear,
        there may be a chance of missing some line in your sap code.
1. open program LFAGL_SPL_SERVICESU01.
2. double click on CALL METHOD cl_fagl_split_services.
3. double click on get_customizing.
you will get read stmt where your abap_false entry may be missing.
hope your problem will be solved.
Regards
vijay

FAGL_FC_VAL is giving DUMP ERROR

Hello Friends,
When i execute FCV for G/L Balances, system is giving dump error which i mentioned below.
Runtime Errors         RAISE_EXCEPTION
Date and Time          16.01.2010 18:31:11
Short text
     Exception condition "CURRENCY_EMPTY" raised.
What happened?
     The current ABAP/4 program encountered an unexpected
     situation.
What can you do?
     Note down which actions and inputs caused the error.
     To process the problem further, contact you SAP system
     administrator.
     Using Transaction ST22 for ABAP Dump Analysis, you can look
     at and manage termination messages, and you can also
     keep them for a long time.
Error analysis
     A RAISE statement in the program "SAPLGICV" raised the exception
     condition "CURRENCY_EMPTY".
     Since the exception was not intercepted by a superior
     program, processing was terminated.
     Short description of exception condition:
For detailed documentation of the exception condition, use
Transaction SE37 (Function Library). You can take the called
function module from the display of active calls.
to correct the error
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"RAISE_EXCEPTION" " "
"SAPLGICV" or "LGICVU02"
"G_CURRENCY_FROM_CT_GET"
or
"SAPLGICV" "CURRENCY_EMPTY"
or
"FAGL_FC_VALUATION " "CURRENCY_EMPTY"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
    To save the description, choose "System->List->Save->Local File
(Unconverted)".
As per this dump i've searched SAP Notes in OSS. Unfortunately i couldn't find anything.
But i'm not getting this error when execute FCV for Open Items.
What could be the solution?
Please guide me.
Rgds
Swapna

Hi Anuj,
Thanks for your response.
Actually no need to maintain currency in the main screen.
This is the problem with non-maintenance of currency for a company code. It will be fixed once we maintain the currency for that Company code.
Bye
Swapna

Table Maintenance screen giving dump

Hi All
I have inserted a new key field in a existing Z table. After that i have adjusted the database and tried to recreate the table maintenance generator, it is giving the warning message as follows
Table ZUPI_WIP is extendable without limits
Field ZUPI_WIP-REVAL_FLAG shortened (new visible length: 000015)
Field ZUPI_WIP-MATNR shortened (new visible length: 000009)
Field ZUPI_WIP-REVAL_FLAG shortened (new visible length: 000007)
Field ZUPI_WIP-AUFNR shortened (new visible length: 000006)
Field ZUPI_WIP-MATNR shortened (new visible length: 000004)
Field ZUPI_WIP-CHARG shortened (new visible length: 000003)
Field ZUPI_WIP-REVAL_FLAG shortened (new visible length: 000003)
When i tried to maintain this table through SM30 it is giving dump.
Kindly help me in resolving this issue.
Thanks & Regards
Madhu

Hi!
You are making changes in the ztable after u have created the table maintenence generator so you need to again modify the table maintenece generator code also.
so,
in the table maintenence screen you must do these steps....like
go this way...
Utilities->table maintenence generator
there
in generated objects->change .
check all screens and modify the table maintenece generator.
the error will be removed.
also the errors are warnings actually the source code is taking that much lenght in its source code try to shorten the field lenghts for which u are getting errors.
If you still have issues plz revert yout query.
Regards.

Iw22 is giving dump

Similar Messages

Maybe you are looking for