IW32: Error getting message (Text for order header not maintain in lang.EN

Hello All,
We just starting getting this message in IW32 and IW33 stating (Text for order header not maintained in language EN) then all the pre-existing description test disappeared.
We have not done any configuration change in this particular system.
Can anyone help to resolve this.
Thanks

Hi,
As with most SAP messages it is always a good idea to trust what it is saying.
The system is telling you that KG has not been created in the English language.
Go to transaction CUNI to check the settings.
Select the Unit of measure for "MASS" (from the drop down list) and check the entries for UOMs.
KG should be there and should have an English description (the message said it was not there for EN)
If it is there and set up correctly then there might have been something else in the UOM field? You didn't enter " KG" did you (a blank character then  KG?)
Steve B

Similar Messages

  • Error msg in GR for excise details not maintained

    Dear All,
    I need to know whether it is possible to have an error message generated in MIGO if the material does not have j1id maintained for it. if yes, please suggest possible solutions.
    regards

    No not possible in Std SAP
    When J1ID details are not maintained excise tab does not comes,
    if excise tab does not comes then its clear excise details not maintained in J1ID
    and there is no std message for this and logical it is not required also , If u set a error message in some user exit than system will expect details in J1ID for all the material, and even for those materials who dont have excise.
    If than also u have to have error message if J1ID details not maintained u will have to use user exit
    where u can write and logic not only on material but also tax code in Po or condition record for excise
    ie if that PO has excise tax code or condition record for excise than check if details are there in J1id if not error
    hope its clear

  • How to activate Long Text of Order Header in IW31/32

    Hi Expert,
    I have one reqm. like want to upload Long Text in Order Header.
    I have used FM 'Create_Text', its working f9 i.e. creating Long Text for Order Header but not displaying it
    in IW32/33 transaction. Entry for Long Text is available in Table STXL and STXH.
    Please advice me how to activate that Header Long Text which I uploaded earlier.
    Thanks,
    Jay.

    Hi Madhukar,
    Yes I am passing everything correctly, as I am getting Long Text record created in Table STXL & STXH, but not able to see in IW32/33 at the header long text.
    So this is my doubt like how 2 update or activate long text of Order Header?
    Thanks,
    Jay.

  • Message FZ626 -Payment orders are not defined for extended withholding tax

    Hi Gurus,
    Would you please help me with the message below:
    Message FZ626 -Payment orders are not defined for extended withholding tax
    In my company  payment orders are created in F110  for accounts payable, as we use another ERP system (Baan) to perform the local accounts payments, and now I've just activated Extended withholding tax functionality With accumulation (necessary in Brazil) but I get this error.
    Is it not possible to user payment order with extended withholding tax + accumulation? I find it hard to believe...
    I've tried to unflag the payment order only for the payment method I'm using in FBZP t.code, but then no payment order were created but instead a payment document were posted with the withholding tax accumulation, but this is not the way we are working, and nothing is sent to Baan
    any help is welcome !
    TREAD LOCKED SINCE IT IS DUPLICATED FROM THREAD payment order are not defined for extended withholding  tax

    Hi,
    On the analysis,  the system expects an entry in the T059Q table with
    code as XX.
    The reason being in the extended withholding tax we use multiple
    witholding tax codes and these entries are stored in the table
    with_item. And in BSEG we populate the field withholding tax code i.e.
    BSEG-QSSKZ  with the value 'XX'. In classical withholding tax we used to
    store the code directly which is not possible with Extended withholding
    tax.
    As the field BSEG-QSSKZ refers to the values in the table T059Q-QSSKZ
    the entry 'XX" needed in this table for the corresponding country of the
    company code to maintain the correct relationship and consistent
    database information.
    Hence for the statistical purpose and for the internal calculations we
    need an entry in the table T059Q. Could you please maintain this code
    i.e. 'XX' also in the table T059Q in a test system? Then retest your issue.
    This should resolve your issue.
    Kind Regards,
    Vanessa.

  • Oracle error  "No message file for" after Upgrade to 10.2.0.5

    After upgrade from 9.2.0.8 to 10.2.0.5 i get the following error "No message file for"
    (with both Users sidadm and orasid)
    Platform AIX 64 bit
    The installation und Upgrade with dbua works fine.
    DB and SAP runs after the Upgrade.
    then I tried
    SQL> select xx from v$log;
    select xx from v$log
    ERROR at line 1:
    ORA-00904: Message 904 not found; No message file for produstyle='font-
    family:courier' ct=RDBMS,
    facility=ORA; arguments: ["XX"]
    The Environment is correct,
    ORACLE_HOME,ORACLE_SID,PATH,LIBPATH have right Values.
    I cant find any failure in Configuration or Install Logs.
    So i tried the following:
    Copy the complete Directorie /oracle/SID/102_64/rdbms/msg from a
    10.2.0.4 Oracle Installation to the 10.2.0.5 home.
    the result ist that the Messagefile could be read by Oracle an i get
    the ORA-00904
    Here the same Query:
    SQL> select xx from v$log;
    select xx from v$log
    ERROR at line 1:
    ORA-00904: "XX": invalid identifier
    So I do the same procedure with an other System.
    I detect:
    the Patch 9952230 (SAP_102051_201011/9952230) delivers
    both Message Files oraus.msg and oraus.msb which caused the problem.
    Has anyone the same Problem?
    Are there any other Impacts with wrong Message Files .
    I raised a OSS Call, but no answer till today.
    best regards
    Uwe

    I could not find anything is sap notes, but oracle recommends to update binary file oraus.msb in $ORACLE_HOME/rdbms/mesg
    Download link:
    https://updates.oracle.com/ARULink/PatchDetails/process_form?patch_num=10235783
    You can find more details also in:
    https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&id=10235783.8
    https://support.oracle.com/CSP/main/article?cmd=show&type=BUG&id=10235783
    The problem with this solution. It is not officially released by SAP.

  • Internal order - Error - Different logical system for order

    Hello all,
    I try to send IDoc (INTERNAL_ORDER) from system A to system B.
    I have done:
    - BD64 / WE20 / WE21
    But after having customizing I have got following error:
    Different logical system for order xxxxxx
    Message no. 2075ALE001
    Diagnosis
    Internal order xxxxxxx already exists in system B. Its master system B is different from the master system A of the new internal order to be distributed with the same order number xxxxxxx.
    System Response
    Internal order xxxxxxx with master system A cannot be distributed in system B.
    Procedure
    Check customizing for ALE for internal orders.
    How to solve this?
    My aim is to maintain internal order master data in test system.
    Thanks for your help.
    David

    I have found something.
    If I change in table AUFK, logical from empty to A (master) and I run IDOC then IDOC has been correctly integrated.
    Then: how to define "master"?

  • How to get Sales Text & Purchase Order Text in MM based on (MSEG-MATNR)

    Hi
      Am working on a Report based on Purchase order & Sales, Could any body tell How to get Sales Text & Purchase Order Text in MM based on (MSEG-MATNR).
    the Field i need to get are : SALES TEXT, PO TEXT.
    Sunil.

    Hi Sunil,
    For getting Material PO text and sales text, you have to rely on Purchase Order and Sales Order. And use READ_TEXT function module to fetch the text.
    Below are examples of PO text and Sales Text:
    1. PO text:
        CALL FUNCTION 'READ_TEXT'
         EXPORT
           ID = 'F03'
           LANGUAGE = SY-LANGU
           NAME = '450000011200010' conacte PO number and line item number
           OBJECT = 'EKPO'
         TABLES
           LINES = INT_TLINES "you will get text in this table
    2. Sales order text:
            CALL FUNCTION 'READ_TEXT'
         EXPORT
           ID = '0001'
           LANGUAGE = SY-LANGU
           NAME = '0000000036000010' conacte SO number and line item number
           OBJECT = 'VBBP'
         TABLES
           LINES = INT_TLINES "you will get text in this table
    ref: STXH and STXL tables.
    Hope it will solve the problem.
    Regards
    Krishnendu

  • Why do I get message "back up disc is not available" for Time Machine?  It

    why do I get message "back up disc is not available" for Time Machine?  It's plugged in.

    If you have more than one user account, these instructions must be carried out as an administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Enter the word "Starting" (without the quotes) in the String Matching text field. You should now see log messages with the words "Starting * backup," where * represents any of the words "automatic," "manual," or "standard." Note the timestamp of the last such message that corresponds to a failed backup. Now
    CLEAR THE WORD "Starting" FROM THE TEXT FIELD
    so that all messages are showning, and scroll back in the log to the time you noted. Select the messages timestamped from then until the end of the backup, or the end of the log if that's not clear. Copy them (command-C) to the Clipboard. Paste (command-V) into a reply to this message.
    If all you see are messages that contain the word "Starting," you didn't clear the text field.
    If there are runs of repeated messages, post only one example of each. Don't post many repetitions of the same message.
    When posting a log extract, be selective. Don't post more than is requested.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Some personal information, such as the names of your files, may be included — anonymize before posting.

  • Error during availability check for order

    Hi PM experts,
    How can I make below warning message (W) to an error message (E)?
    Message no: CO820 (Error during availability check for order)
    Regards,
    Nizam
    PM Consultant

    Hi,
    you can cantrol not to release maint orders in case if parts are missing by OIOI transaction, here under Material Availability  against Release material you maintain option 3 No release if parts are missing. This way you can achieve this. If there are other components which has stock on Maint order then delete the un-available material from maint order then it will allow you to release the order.
    Hope availability check rule is maintained on material master.
    Hope it helps.
    Regards,
    N.Nagaraju

  • I can't open my itunes application, keep getting message - the itunes application could not be opened, an unexpected error occurred (13010) Please help

    I can't open my itunes application, keep getting message - the itunes application could not be opened, an unexpected error occurred (13010) Please help

    Try removing the Genius database.  In the "Finder" go to the /username/Music/iTunes/ folder and delete the "iTunes Library Genius.itdb" file. This may allow the program to launch again. This file will be recreated upon first use of the "Genius" feature.

  • How to get the text for the new query

    Hi all...
    we have created a new query by copy of existing query. iwe have changed only the sales area in the filter.
    when we run the original query in japan language, getting japan text for the material where as for the new query it is not getting japan text.
    we have extracted text masterdata for sales area but when we run the query it is not displaying material description in japan language.
    how to get text for the material in the new query?
    thanks

    hi,
    What is the output for text filed you are getting as of now?
    Check the properties of the material in old query?
    Generate the query in tcode RSRT and execute and check.
    Check if the Display as properties is selected as "Key and Text".
    try to replace it back(sales area) in filters and check in new query - if u are getting the desired output or not.
    Regards
    KP

  • Get message "application virtualization client svcs not running". error 4625852-0fa10612-00006003

    When trying to print an attachment to an email, I get message "application virtualization client svcs not running". Error Code: 4625852-0FA10612-00006003.

    I mendoza How you do, sorry to learn that you are having this issue.
    specify 
    What printer do you have?
    What Operating system?
    What browser are you using?
    I will do my best to help share this infomation
    Regars:
    RobertoR
    and remember . . .
    You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

  • Error: getting dev info for Tape - unrecoverable error

    Hi,
    I have configured a Oracle Secure Backup version 10.4.0.1.0_LINUX64.
    It was working corretly until yesteday that i can't mount the tape because this error appears:
    Error: getting dev info for Tape - unrecoverable error
    I run this command with obtool:
    ob> lsdev -lvg
    ***0 wst__set_mode: bus 0, target 0, lun 0: IBM,ULTRIUM-HH4,B6W1
    ***0 wst__get_sn: code=0x0
    ***0 wst__info: infolen=0xd8, info=0x7fff007bf050
    ***0 wst__dev_state...
    ***0 wst__exec: op=0 (nop), buf=0x0, count=1 (0x1), parm=0x0
    ioctl_op=0x3, to=300, datalen=0x0, buf=0x0
    cdb: 00 00 00 00 00 00 tur
    ***0 wst__exec: op=2 (sense), buf=0xd1e2ec0, count=96 (0x60), parm=0x0
    ioctl_op=0x5, to=30, datalen=0x60, buf=0xd1e2ec0
    cdb: 03 00 00 00 60 00 sense, cnt=96
    ***0 wst__exec: rval=0, status.code/resid/checks=0x0/0x0/0x0
    ***0 wst__get_sense(int) cmd = 0, sense data:
    70 00 03 00 00 00 00 58 00 00 00 00 53 00 36 00
    00 00 00 00 00 02 20 20 20 20 20 20 00 20 00 00
    00 00 1E 00 00 1C 62 1E 81 00 00 00 00 00 00 00
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    00 00 00 00 00 00 00 07 08 18 00 00 00 00 00 00
    00 00 00 00 00 00 20 20 20 20 20 20 20 20 20 20
    ec=0, sk=media err, asc=53, ascq=0
    error is: unrecoverable error
    flags: (none)
    ***0 wst__exec: rval=-1, status.code/resid/checks=0x20008111/0x0/0x0
    ***0 wst__exec: op=7 (readpos), buf=0x7fff007bee60, count=20 (0x14), parm=0x0
    ioctl_op=0x5, to=180, datalen=0x14, buf=0xd1e2fc8
    cdb: 34 00 00 00 00 00 00 00 00 00 read_pos
    ***0 wst__exec: op=2 (sense), buf=0xd1e2ec0, count=96 (0x60), parm=0x0
    ioctl_op=0x5, to=30, datalen=0x60, buf=0xd1e2ec0
    cdb: 03 00 00 00 60 00 sense, cnt=96
    ***0 wst__exec: rval=0, status.code/resid/checks=0x0/0x0/0x0
    ***0 wst__get_sense(int) cmd = 34, sense data:
    70 00 03 00 00 00 00 58 00 00 00 00 53 00 36 00
    00 00 00 00 00 02 20 20 20 20 20 20 00 20 00 00
    00 00 1E 00 00 1C 62 1E 81 00 00 00 00 00 00 00
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    00 00 00 00 00 00 00 07 08 18 00 00 00 00 00 00
    00 00 00 00 00 00 20 20 20 20 20 20 20 20 20 20
    ec=0, sk=media err, asc=53, ascq=0
    error is: unrecoverable error
    flags: (none)
    ***0 wst__exec: rval=-1, status.code/resid/checks=0x20008111/0x0/0x0
    ***0 wst__dev_state: code=0x20008111
    ***0 wst__info: code=0x20008111
    Error: getting dev info for Tape1 - unrecoverable error
    ***0 wst__conn_type returning 1 (code 0x0)
    ***0 wst__close: wh=0x0
    Tape1:
    Device type: tape
    Model: [none]
    Serial number: 1068037161
    In service: yes
    Automount: yes
    Error rate: 8
    Query frequency: [undetermined]
    Debug mode: yes
    Blocking factor: (default)
    Max blocking factor: (default)
    UUID: c60554ca-0562-1030-8cdb-d4ae528eb115
    Attachment 1:
    Host: bosmgmt.bos.local
    Raw device: /dev/sg3
    Connection type: SCSI
    Inquiry data:
    Vendor: IBM
    Product: ULTRIUM-HH4
    Firmware: B6W1
    Serial number: 1068037161
    Hardware compression: not available
    Hardware encryption: not available
    Thanks in advance

    It's reporting a hardware media error on the drive. Basically you've got a hardware fault.
    Thanks
    Rich

  • Changing message text for univariate discrepancies

    Is it possible to edit the message text for univariate discrepancies? As per my knowledge, they are generated at the system level and programmers cannot change them. I was wondering if there is a workaround.
    Thanks

    Hi,
    You could try going to Installation Codelists>> "Discrepancy Messages" and change the respective message for each of the univariate discrepancies(Data Type, DVG, Length ...etc).
    Note: Installation codelists control Oracle Clinical behavior installation-wide; that is, across an installation of multiple Oracle Clinical databases, so tread wisely after due consultation with your department.
    Regards,
    Naveen

  • Why do my kids get messages intended for me on their ipods?

    Why do my kids get messages intended for me on their ipods?

    If you share the same apple ID then they can use your phone numbers to receive and send messages.
    Check Settings > Messages >Send & Receive.

Maybe you are looking for