IWEB 2.0.4 has broken the photo's page w/ gradient background

After updating today to the latest iWeb, I created a new photo's page. All my pages have a gradient gray background.
When I click on a picture, instead of the gradient filling the whole page it only fills the area where the photo's are.
This is in both safari and firefox 3.0.1

YIKES!!! It's worse than I thought! How do I go back to the previous version of i-Web!!!!???!!!
Seriously, how do I downgrade to the previous version?
Ok, here is what I mean,
1. Go to:
http://web.me.com/pgirolam/paulgirolamomusic.com/Photos.html
Click on any photo, you'll see that the gradient feature goes all the way to the top.
This is the way it's supposed to look, and did in the previous version.
2. Now go to the new page I created with the updated software.
http://web.me.com/pgirolam/paulgirolamomusic.com/Photos_3.html
Click on one of the photo's and you'll see that the gradient fill is blocked off at the top of the photo's... This is wrong... this where I believe the newer version is broken.
3. The newer version also broke another page, a page that looked fine in the previous version:
http://web.me.com/pgirolam/paulgirolamomusic.com/BCM_Pix.html
You'll see that the gradient starts 1/2 way down the page!!!
I not only updated the web.me.com domain space, but also my webspace on go daddy and they both looked the same. I tested on two computers, iMac and a PC. Both yielded the same results. I also tested on three browsers on both iMac and PC, ie7, firefox 3.0.1 and Safari
The good news is I had a backup of the web content from the previous version of iWeb. To see the way it's supposed to look, before I upgraded iWeb, goto this link:
http://www.paulgirolamomusic.com/Photos.html
http://www.paulgirolamomusic.com/Photos_Cont.html
http://www.paulgirolamomusic.com/BCM_Photos.html
Click on any photo, you'll see gradient all the way to the top.

Similar Messages

Firefox has broken the link that creates menu / task bars

firefox tells me it has broken the link that creates task / menu bars. I've uninstalled & reinstalled. Everytime I built new task bars through internet, Firefox crashes on me. Help please.
== 2 days ago

Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

Weblogic patch has broken the LDAP authentication

Hi,
We have installed XIR2 SP4 on Linux and also installed a patch for the weblogic ,after installing weblogic patch we are unable to login to the infoview using LDAP authentication getting error ""An Error has Occurred: java.lang.InstantiationException:Could not instantiate bean CE_Session, neither class nor beanName were specified."
Curently we have uninstalled the weblogic patch , now everyting is working fine.
We want to know the reason for this , why the instalation of patch has broken the LDAP authentication?
Environment -
BOXIR2 SP4,
LINUX,
Web logic 9.2,
Oracle 10g.
Thank you in Advance.
Thanks & Regards,
Bill.

You'll have to open an incident with support, that error doesn't seem like an actual LDAP error so go with deployment if you do. See if you can get an engineer to reproduce or trace your environment. This is the 1st time I've heard of a weblogic patch breaking LDAP.
Regards,
Tim

Installing HP Printer software update 3.0 has broken the scanner on my HP PSC 1355 printer.

Installing HP Printer software update 3.0 has broken the scanner on my HP PSC 1355 printer.
After the update, the printer prints correctly, but scanning from the Print and Scan, Preview or Image Capture fails with "Waiting for scanner" followed be "Failed to open a session on the device." Followed by the device disappears form ImageCapture.
I've tried restarting to the computer and printer and plugging it into another USB port - the results are the same. Printer utility hangs too.
Solutions?

did you try this:
Place the item that you want to scan on the scanner glass, or load it into the Automatic Document Feeder (ADF) if your printer has one.
In the Applications folder or from the Dock, click Preview.
From the Preview File menu, select Import from Scanner.
Select your printer from the list. The details of the scan display.
If a 'Software for this device is not installed' message displays after you select your printer, click Install, and then follow the instructions to complete the installation.
Click Show Details to view scan settings and options.
NOTE: Make sure that you select either the Flatbed mode or theDocument Feeder mode, depending on your printer and how you plan to scan.
Change any settings as necessary, and then click Scan.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03967522&cc=us&dlc=en&lc=en &os=4159&product=306898&sw_lang=#N1056

Hello all, I'm dubbing my italian website in english. The "reproduce presentation" item in the photo album pages appears only in italian, because I have an italian 2008 version of the application. Is there any way to make it appear in english?

Hello all, I'm dubbing my italian iweb site in english. The "reproduce presentation" item in the photo album pages appears only in italian, because I have an italian 2008 version of the application. Is there any way to make it appear in english?
Thanks for your attention and appreciated answers

iWeb has no Italian version.
The language setting on your computer determines the language that is used.
Change the language settings on your computer or use this :
http://www.tj-hd.co.uk/en-gb/languageswitcher/

My grandson has a iPod touch 4th and has broken the screen, does any body know how much apple charge for replacement and can you wait for it to be done or does it get sent away.

My grandson has broken his screen on his iPod 4th touch. Does anybody know how much apple charge to replace and do they do it while you wait

Apple will exchange your iPod for a refurbished one for $199 for 64 GB 4G and $99 for the other 4Gs unless you have AppleCare+ extended warranty. Then it would be $29. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following maybe less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the screen yourself if you are up to it
iPod Touch Repair – iFixit

Changing Navigation Layout on the Photo Detail Page

Is it possible to change the position of the navigation ,eg. the previous and next links, on the detailed photo page without having to write a javascript widget? I just want the links to appear just below the photo with little space between and directly centered under the photo. Is this possible?

flashronin wrote:
Is it possible to change the position of the navigation ,eg. the previous and next links, on the detailed photo page without having to write a javascript widget? I just want the links to appear just below the photo with little space between and directly centered under the photo. Is this possible?
There is no way around it, it's all about knowing iweb javascript widgets and javascript.
time to learn javascript?

Why will Firefox will not display content when it has loaded the Face Book page?

Firefox (FF) loads the Facebook page but only displays the menu of Facebook. Clicking on menu items does produce results but not the main Facebook page.

*"Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
*"Remove the Cookies" from sites causing problems: Tools > Options > Privacy > Cookies: "Show Cookies"

My iPone 5 has broken the lock button has stopped working and there are many other software problems, I was wondering would I go about in getting this repaired by apple?

I have my phone since november and it has slowly start to bug out, the brightness will just adjust itself, it won't repond to my touch. The lock button has completely stopped working. What do I do? I've never had to deal with apple ever before so I'm not aware of their producer and how long do I have to wait to recieve my product? Hoping you could answer my question. Many

I should have seen that coming
Start here
https://expresslane.apple.com/Issues.action
assuming you are in US
Following on from excellent advice above you pick the "Genius Bar" from top menu of particular store

Firefox 36 has broken the "Add Exception" button for self signed certs

clicking on the add exception button does nothing now in version 36, I had to roll back to 35.0.1

HI ringnjc,
It will depend on the type of self signed certificate. An example url will help better investigate.
However recently, CA 1028 bit RSA certs were phased out in version 36. In order to make sure that the certificates are compatible:
*[https://www.mozilla.org/en-US/about/governance/policies/security-group/certs/policy/ Mozilla CA Certificate Policy
Version 2.2]
[https://blog.mozilla.org/security/2015/01/28/phase-2-phasing-out-certificates-with-1024-bit-rsa-keys/]

HT204022 Is there a way to delete unwanted photos from an iPad? The Photos app on the iPad 3 has no option to delete photos that are synched into it via iCloud or iTunes.

Is there a way to delete unwanted pictures from the Photos app on an iPad?

Welcome to the Apple Community.
Navigate to the photo sheet page (the one with the thumbnails) tap the edit button in the top right corner, tap the photos you want to delete to select them, tap the delete button in the bottom right corner.

10.6.8 update has broken quicktime 7 codecs

Hi there
It seems that the 10.6.8 update has broken the codecs that quicktime 7 uses.
We have users here that need to use quicktime 7 pro to export movs etc, and since the update, they cannot play (so far that we have found) movs that are using the photo-jpeg decompressor.
We're using the version from the optional installs package form the dvd.
We've been able to work around this by copying (from a 10.6.7 install) the following folders, over the top of the 10.6.8 image.
/System/Library/QuickTime
/System/Library/QuickTimaJava
/System/Library/Frameworks/QuickTime.framework
/Library/QuickTime
While ive tried to single out which files are affected, it seems copying one of these folders at a time hasnt fixed the problem. Only when (at least) all the /System folders are copied over, then we can start playing the movs that have the broken codecs.
Is this something Apple is aware of? Is there an word of a fix for this? I also hear that optical audio is broken as part of the update - which the solution has been to recopy the kext file back from an older system.
10.6.7 was a show stopper for us - because of the NFS permission problems.. (but QT7 worked)
and now 10.6.8 is a show stopper for us, because QT7 is now broken, but the NFS problems are resolved.
I dont want to have to rebuild our workstations back to 10.6.6 as we had other issues that was fixed with 10.6.7..
Any ideas anyone? Apple dev's?
Cheers

i think ive narrowed it down to a single file...
On my 10.6.8 laptop - with the stock QT files... the affected movs wouldnt play...
I copy this file from a 10.6.7 machine...
/System/Library/QuickTime/QuickTimeComponents.component/Contents/MacOS/QuickTime Components
And i can play the files again...

Can 'SUBSCRIBE' be removed from photo template pages in iWeb??

I am using photo template pages on my website (designed in iWeb 08). My site is an artist portfolio site so the photo template pages work well for dealing with all the art images I am posting.
One problem: there is a subscribe button on my pages which lets people subscribe to my iPhoto library. I cannot figure out how to remove it.
Any ideas on this?
Thanks!
Christine

Christine
Click on the Inspector at the bottom of your photo page, then click on the Photos Inspector (just to the left of RSS).
Next click on the Photos button, then uncheck "Allow visitors to subscribe".
The Subscribe button will disappear from your page.
Bill

IOS 4.1 on iPhone 3G has broken corporate exchange sync (works on iPhone 4)

At work we use iPhone Configuration Utility to setup corporate exchange activesync account for VIP and IT users. Our configuration uses certificate.
The last iOS update (4.1) has broken the sync for iPhones 3G.
It still work with iPhone 4 (sorry we don't have 3GS for testing !) and it worked on iOS 4.02 on the 3G.
On the 3G iOS 4.1 Mail sync the folders of the mailbox but not the messages nor calendar and contacts.
We've tried recreating the certificate but nothing changes.
Google exchange sync still works fine.
Nothing has changed on the Exchange side (HTC phones are syncing well)
Does anybody has the same problem ? and howto fix it ?
The following log was captured on the iPhone Configuration Utility on a 3G iPhone :
Fri Sep 17 11:01:37 iPhone MobileMail\[74] <Warning>: EAS|ASFolderItemsSyncTask failed with status: 1
Fri Sep 17 11:01:37 iPhone MobileMail[74] <Warning>: error syncing folder: Error Domain=MFMessageErrorDomain Code=1042 "The operation couldn’t be completed. (MFMessageErrorDomain error 1042.)"
Fri Sep 17 11:01:37 iPhone MobileMail\[74] <Warning>: EAS|server returned null sync key for sync of folderID 1. Will erase local messages, perform full sync.
Fri Sep 17 11:01:37 iPhone MobileMail\[74] <Warning>: EAS|mail db had no sync anchor for folderID 1. Will erase local messages, perform full sync.
Fri Sep 17 11:01:37 iPhone securityd\[360] <Error>: CFReadStream domain: 12 error: 8
Fri Sep 17 11:01:38 iPhone MobileMail\[74] <Warning>: EAS|No parse rule from object <ASFolderItemsSyncResponse: Collection: (null)> for codePage 0x0 token 0x11 (CPT = 17), parseRules have keys (
14,
28
)

Same problem here. While syncing Exchange e-mail & Contacts whether over wi-fi or 3G or Edge net, phone is basically unusable until the sync completes. I have phone set to sync e-mail every 15 minutes to save battery, but it seems that e-mail and contacts sync if you open them. So, if you open contacts to look up a phone number, scrolling becomes unresponsive, as does "selecting" a name or number, presumably until sync is complete (there are about 2,000 contacts in my directory). Seems to have started with 4.1. Likewise, the phone keypad is unresponsive until sync completes. Hit a number and nothing appears to happen, so I hit it again (only to have the number repeated several times in the display 10 or 15 seconds later once sync completes). Agree it's an apparent background priority issue. A pain in the neck.
My co-workers told me they thought quickest solution was to chuck it and get a Droid. I'm not quite to that point. Anybody know of a fix yet?

Eclipse Mars has broken exisitng JDBC

Hi all,
I've upgraded to Eclipse Mars - but loading the current workspace (I told it to upgrade from Luna for compatibility) has broken the JDBC Oracle connection.
The only settings that may have changed are my machine's Java version. Windows 8.1 has caused me no end of bother recently by having multiple Java installations and being fussy interacting with both 64 and 32 bit versions. I got round this with Luna by forcing a path to v7 in eclipse.ini, but v6 is installed "as default" according to the control panel info. However, both 7 and 8 are supposedly installed.
Using the new Eclipse installer, it was happy to function using the newest version of Java, but I don't think the binary app is reading it.
Error fairly standard from Java - when testing connection
"Cannot load JDBC Driver class: oracle.jdbc.OracleDrvier."
Nothing has changed with the native Oracle instant client.
Posted in both Eclipse and BIRT forums as it's BIRT I'm using.
Any thoughts or more info needed?
Thanks

Fixed already: Mars needed to restore the previously used OJDBC.jar driver which didn't automatically get read for some reason.

IWEB 2.0.4 has broken the photo's page w/ gradient background

Similar Messages

Maybe you are looking for