IWeb and Domain Names

Hi, I've purchased several domain names and want to publish websites to my iDisk which I want to be found on search engines. Is CName the only way to do this, thus limiting me to only use one CName and one domain name? Be patient, I'm new and slow. Thanks

Thanks Wyodor,
OK Cname has nothing to do with being found by a search engine, but what does? I have published a site anstock.org on which I want to develop family tree information but an anstock search doesn't show up on a google search.
Yes I can do URL forwarding and I have learned how to publish different sites using iWebsites, but no search engine is picking up my site. I'm practicing to get ready for a business. I'm a therapist and own sandplay.net.au but typing in sandplay in google does not pick up my URL forwarded (practice) page.
Further advice would be greatly appreciated.

Similar Messages

  • IWeb and domain name

    I have created a website on iWeb and would like to post it to a domain name. I don't know much about this part and would like advice. Where can I get a domain name and what can I expect to pay. Then, once I have it, how do I post the website I created on iWeb onto that domain name?

    http://iwebfaq.org/site/iWeb_Domains.html

  • IWeb and domain names 101

    I know this material has been covered here before, but I'm having trouble putting the story together fully - sorry if this is repetitive, but:
    I have a website up which I created in iWeb, and currently publish in iWeb using my Mobile Me account to host it. I assume that's how it's working anyway? I think the folders holding the site pictures etc are kept on my iDisk?
    I have two questions
    1) I want to purchase a simpler name for the site, and just work it so that everything is the same, but my site will now have a simple name, rather than the complex one it is assigned by iWeb (which uses my email address, etc etc)
    How do I do that?
    2) Is that the best way to do this, or are there benefits to having the site hosted by another service other than .Mac (or MobileMe - whatever it is porperly called these days.)
    Thanks!

    Please can you help.
    I have two Mobile Me accounts, and I want to load a different personal domain on the second one to the first one. The first one is personal, and the second one is for a group practice. When I uploaded the pages to Mobile Me, it "assumed" that the pages intended for the second site were to be loaded to the first site under domain name 1. In fact, I want to get those pages under domain name 2. I have been to the domain provider's site and changed the CNAME so that it uploads under the second domain name. I assumed that I could have two separate domain names because I have paid two subs for Mobile Me. What I can't work out is how I can move the pages from the first account personal domain to the second account personal domain. Can anyone help please?

  • I have and existing web site and domain name. I'd like to know how to import into iweb. I currently use Yahoo's sitebuilder to build my site but Sitebuilder is not compatible with the iMac

    I have and existing web site and domain name. I'd like to know how to import into iweb. I currently use Yahoo's sitebuilder to build my site but Sitebuilder is not compatible with the iMac

    Chapter 2.3 on the iWeb FAQ.org site has tips on using some of the existing files, image, audio, video, etc., from the published site in the creation of the new site with iWeb.
    OT

  • How to change host name and domain name in installed Cisco Meeting Place Express 2.0?

    Hi
    I have  Cisco Meeting Place Express 2.0 installed on server. Meting Place uses Linux (Red Hat) as base operation system. Please tell me how I can change host name and domain name for Meeting Place Express application to integrate it into corporate domain infrastructure.
    Thanks in advance!!!
    Sincerely yours
    Sergey Bondarenko

    Hi
    Thanks for your attention for my humble problem.
    I have performed Meeting Place Express configuration through the “net” command.
    But now unfortunately I can't connect to meeting place through web browser. I just get blank page.
    Though I can reach the server with help of ssh. I think my DNS works properly because I can resolve the ip address of  cumpxvoice .uclab.com and cumpxweb. uclab.com with help of dig command.
    Have you any idea?
    A lot of thanks in advance!!
    Sincerely yours Sergey Bondarenko
    Here I have printed the net configuration output of Cisco meeting Place Express:
    [root@cumpxvoice root]# net
    This is the MeetingPlace Express network configuration utility.
    Up to the point where you save changes, it is safe to hit ^C to get
    out at any time, in which case nothing will have changed.
    1) List current configuration
    2) Configure Ethernet port 1
    3) Configure Ethernet port 2
    4) Configure service bindings
    5) Set host names
    6) Set domain name
    7) Configure DNS service
    8) Configure NTP service
    9) Configure routing
    10) Done
    Select: 1
    Primary/audio host name: cumpxvoice
    HTTP host name:          cumpxvoice
    RTMP host name:          cumpxweb
    Domain name:             uclab.com
    Service bindings:
    Audio:                   port 1 (eth0)
    Web browsing (HTTP):     port 1 (eth0)
    Web conferencing (RTMP): port 2 (eth1)
    Port 1 (device eth0):
    IP Address:      10.62.60.116
    Network mask:    255.255.255.0
    Default gateway: 10.62.60.1
    Link setting:    autoneg on
    Port 2 (device eth1):
    IP Address:      10.62.60.117
    Network mask:    255.255.255.0
    Default gateway: 10.62.60.1
    Link setting:    autoneg on
    Static routes:
    Destination      Gateway          Network mask     Port
    0.0.0.0          10.62.60.1       0.0.0.0          1
    DNS Servers:
    10.62.60.115
    10.0.1.4

  • How to change Host and domain name on APS 10g R2

    Hi,
    I have installed oracle application server 10g rel.2 I want to change the host and domain of the system, what should I do, Plz help.
    Thanks and Regards.
    Khawar

    Hi,
    Thanks to all of you for reply, I started without reading any manual to modify host and domain name and after expending several hours finally decided to reinstall APS, with new installation forms runing ok but report server having problem if you see the status of report server in enterprise manager it shows green mark(if you want to stop it via EM it will not), if you check with Report Queue manager it says no report server with the given name,
    if you check the report with GETSERVERINFO via browser it says
    "REP-51002 Bind to report server AAAAA failed. some one have idea."
    some one plz explain me how can I fix it.
    Thanks and Regards.
    Khawar

  • How to change the full host and domain name on OS X Leopard...

    I recently bought an iMac, and I'm trying to configure it for my network. The question I have is, how can I change the host name and domain name from Skuld.local to skuld.tolharadys.net?
    After mucking around with a few searches on Google, I've gotten the domain name to stick since running domainname returns tolharadys.net. Also I can change the hostname as reported by 'hostname' temporarily by running 'hostname skuld.tolharadys.net' in Terminal.app. However, this isn't persistent after reboots. Ideas are welcome.

    You would need a DNS server on your network configured to answer authoritatively for that particular subdomain.

  • How to change the name / IP address and domain name for BOE Server

    Hello,
    We want to change the name / IP address and domain name for BOE Server, please could you indicate the steps or procedure to follow?
    I need your help
    thank you

    If it's 3.1 just change them, shouldn't cause any issues if by domain name you are referring to changing the domain the computer belongs to. If you are changing your domain for AD authentication then you will may have to take quite a few steps if the old domain is going away. Let us know.
    Regards,
    Tim

  • How to change IP, Hostname and domain name for Oracle Application R12

    Hi,
    I'm new to Oracle, we used to have one production and one test server for Oracle Application R12, but the test server was corrupted, so we decided to clone production server and create a new test server, after cloning and creation of test server, how should we do to change IP address, hostname and domain name for test server?
    Our production and test server environment is:
    Linux Enterprise AS 2.6.9
    Application module: E-Business Suite Treasury only
    Your advice will be much appreciated.
    Regards,
    Kenneth
    Edited by: 850209 on Apr 7, 2011 5:37 PM

    850209 wrote:
    Hi,
    There are few tnsnames.ora and listener.ora files in the system, how to know which one are effective? If I change tnsnames.ora hostname entry, do I need to change listerner.ora file also?
    Thanks.
    Regard,
    Kenneth.tnsnames.ora is used only by client processes. listner.ora is used only to configure the listener, and that is a server side issue only. In addition, the listener can start without any listener.ora at all, using all default values. See my discussion of tns issues at edstevensdba.wordpress.com
    If you are using dbcontrol, you will most likely need to reconfigure it, using the emca utility.

  • Change Groupwise system name, po name and domain name?

    Hello Board,
    we want to migrate a Groupwise 7 System (Netware) to a Groupwise 8 System (Linux).
    Doesnt sound that difficult, but we dont want to use the names for the system name, the post office and the domain (groupwise domain, _not_ internet domain) which were used on the old system.
    Currently iam trying the way mentioned in TID 10077372, which mentions merging the two systems and then delete the old System.
    Am i on the right way? Do you have any hints?
    Any help appreciated.
    best regards
    sven

    Grewes,
    Ok you have a GW system(s) that you do not like the names and you want to change them. Not a problem. As you stated, and as Tommy said -merging works.
    The process you need is to build a new GW system -same as the version you have running preferred. Set it up as you like it -name-wise. Then, merge the older systems (branches) into the new system you built. Then you will have to build new domains/post offices and move mailboxes from the old GW branches into the new domains/post offices. When its all done -delete the old, and you are done.
    I have done many different variations of this type of migration/merge/consolidation. It works, its just a lot of work. Just make sure to plan it all out on paper first, document it, then go forward.
    Good Luck!
    Take Care.
    Gregg A. Hinchman
    Consultant
    [email protected]
    www.HinchmanConsulting.com
    A Novell Consulting Partner
    317.329.0288 Office
    413.254.2819 eFax
    "Courage is doing what is right."
    "Do not be bound to any doctrine, theory or ideology, even Buddhist ones. All systems of thought are guiding means, not absolute truth." Thich Nhat Hanh, Vietnamese monk.
    Book Travel @: www.booknewtravelnow.com
    >>>
    From: grewes<[email protected]>
    To:novell.support.groupwise.migrations
    Date: 8/20/2009 6:56 AM
    Subject: Re: Change Groupwise system name, po name and domain name?
    Thank you for your reply.
    I do not want to keep the names.
    If i want to link this domain to another branches domain and the domain
    is called the same this doesnt work AFAIK.
    grewes
    grewes's Profile: http://forums.novell.com/member.php?userid=3563
    View this thread: http://forums.novell.com/showthread.php?t=383606

  • OS X Server clients can't login after IP renumber and domain Name change

    I can not seem to get the logins working again on my OS X server (10.9.4 w/ server 3.1.2 on a 1 yr old. MacMini) after I needed to renumber the IP and change the domain name. I destroyed the Open Directory server, recreated it and created one test account. If I log in to the client with a local account I can connect to the server (Go>Connect To Server)  from the client using my newly created account, but when I try to login to the server  using the same network account login I get the "shaking head" response immediately. I have rebound the server to this client and it says that network accounts are available, but seem to be at a loss to understand why it won't let me login...
    The only error message I see in any of the logs is the following:
    (AFP Error Log:) Sep 15 20:21:47 isis.mydomain.com AppleFileServer[3032] <Info>: major error <1>: No credentials were supplied, or the credentials were unavailable or inaccessible.
    I'm not sure what credentials it is referring to. I created a self signed certificate that I am using with OD, could that be the one?

    Many Open Directory problems can be resolved by taking the following steps. Test after each one, and back up all data before making any changes.
    1. The OD master must have a static IP address on the local network, not a dynamic address.
    2. You must have a working DNS service, and the server's hostname must match its fully-qualified domain name. To confirm, select the server by name in the sidebar of the Server application window, then select the Overview tab. Click the Edit button on the Host Name line. On the Accessing your Server sheet, Domain Name should be selected. Change the Host Name, if necessary. The server must have at least a three-level name (e.g. "server.yourdomain.com"), and the name must not be in the ".local" top-level domain, which is reserved for Bonjour.
    3. The primary DNS server used by the server must be 127.0.0.1 (that is, itself) unless you're using another server for internal DNS. The only DNS server set on the clients should be the internal one, which they should get from DHCP if applicable.
    4. Follow these instructions to rebuild the Kerberos configuration on the master.
    5. If you use authenticated binding, check the validity of the master's certificate. The common name must match the hostname and domain name. Deselecting and then reselecting the certificate in Server.app has been reported to have an effect in some cases. Otherwise delete all certificates and create new ones.
    6. Unbind and then rebind the clients in the Users & Groups preference pane. Use the fully-qualified domain name of the master.
    7. Reboot the master and the clients.
    8. Don't log in to the server with a network user's account.
    9. Disable any internal firewalls in use, including third-party "security" software.
    10. If you've created any replica servers, delete them.
    11. As a last resort, export all OD users. In the Open Directory pane of Server, delete the OD server. Then recreate it and import the users. Ensure that the UID's are in the 1001+ range.

  • How to retrieve username and domain name on Macintosh.

    Hi,
    Can anyone tell me how to retrieve username and domain name on Macintosh
    Thanks
    Priyanka.

    There is no system property for the domain name.
    Can you please tell me some other way for solving
    this problem.No. If it's not an environment variable (System.getEnv IIRC) and no property, you can't get it without native calls using JNI or Runtime.exec/Process.

  • CUCM & CUP DNS and Domain name

    Hello
    CUCM 9.1, CUP 9.1 and CUC 9.1
    I have not mentioned DNS or domain name on my CUCM and on my CUP, if i enable the DNS and domain name on the CUCM does it will change the license mac of CUCM AND CUP ???? which will cause me to rehost the license from the cisco licensing team.
    thanks

    Hi Jack,
    You can do that. Nothing would happen.
    please follow the links
    https://supportforums.cisco.com/message/4109569#4109569
    https://supportforums.cisco.com/thread/2227236
    regds,
    aman

  • User Logon Name (pre-Windows 2000) and Domain Name Don't have the same Value

    Hi
    is it possible to have User Logon Name (pre-Windows 2000) and Domain Name with different value?
    Exemple:
    domain name domain1.com
    and User Logon Name (pre-Windows 2000) Domain2\user

    If you have trust in place, then also you can use trusted domain name to login from trustee domain. Also, UPN suffix can be added.
    http://technet.microsoft.com/en-us/library/cc773178%28v=ws.10%29.aspx
    Awinish Vishwakarma - MVP
    My Blog: awinish.wordpress.com
    Disclaimer This posting is provided AS-IS with no warranties/guarantees and confers no rights.

  • I have two location one is Delhi(IP-192.168.100.*) and another is Mumbai(IP-192.168.1.*) and both are connected by MPLS line and ping with each other. We have one DC in Delhi location and domain name is CAPLDC and Delhi location all PC is member of this

    I have two location one is Delhi(IP-192.168.100.*) and another is Mumbai(IP-192.168.1.*) and both are connected by MPLS line and ping with each other.
    We have one DC in Delhi location and domain name is CAPLDC and Delhi location all PC is member of this domain and working properly.
    now i am trying join the Mumbai location PC with my Domain(CAPLDC) but they are not join with my DC and generate the error.
    I have chek the DNS and nslookup all are correct but this is generate error. 
     Is this possible Mumbai location join with this Domain(CAPLDC)???
    One more thing when i have created another DC with this name (papldc.com) then Mumbai location is joined properly.
    Pls find the error message below and also find the attachment.
    Note: This information is intended for a network administrator.  If you are not your network's administrator, notify the administrator that you received this information, which has been recorded in the file C:\Windows\debug\dcdiag.txt.
    The domain name "capldc" might be a NetBIOS domain name.  If this is the case, verify that the domain name is properly registered with WINS.
    If you are certain that the name is not a NetBIOS domain name, then the following information can help you troubleshoot your DNS configuration.
    DNS was successfully queried for the service location (SRV) resource record used to locate a domain controller for domain "capldc":
    The query was for the SRV record for _ldap._tcp.dc._msdcs.capldc
    The following domain controllers were identified by the query:
    capldcserver.capldc
    win-dyfq2poc88q.capldc
    However no domain controllers could be contacted.
    Common causes of this error include:
    - Host (A) or (AAAA) records that map the names of the domain controllers to their IP addresses are missing or contain incorrect addresses.
    - Domain controllers registered in DNS are not connected to the network or are not running.
    Pankaj Kumar

    Why are you using a single labeled domain? I would recommend renaming the domain name to be something like domain.com.
    Please refer to the articles below to fix your current issue:
    http://www.wincert.net/tips/networking/1614-cant-join-pc-to-a-domain-with-single-label.html
    http://www.itgeared.com/articles/1128-using-single-label-dns-names-for-active/
    This posting is provided AS IS with no warranties or guarantees , and confers no rights.
    Ahmed MALEK
    My Website Link
    My Linkedin Profile
    My MVP Profile

Maybe you are looking for

  • Is there a way of changing photos' dates all at once?

    Hi, I imported a number of photos taken within one week into iPhoto - some of them were assigned a wrong date by my camera which made the last photos the first ones in the folder. I know I can change the photos' dates manually one by one, but is ther

  • JPopupMenu doesn't show up

    Hi all I'm using a popup to work like a combobox in an applet. it works fine on my machine, but i think it's because i have java 1.4 installed. the standart jre in our company is 1.3, and in this version the popup doesn't show up. any ideas? my code:

  • No internet wireless

    I have an wrt300n router. I can connect to the internet via my wired computer but my laptop that is connecting wirelessly connects to the network but can't connect to the internet.  Firmware Version:  v1.51.2 Feb. 27, 2007           Current Time:  Sa

  • While in Illustrator cc, when I place a tiff there is no preview in Illustrator, what am I missing,

    While in Illustrator cc, when I place a tiff there is no preview in Illustrator, what am I missing,

  • MSI GT60 Reset CMOS / Get rid of Bios PW

    Hello there, got my lovely GT60 here and it shipped out with a Bios PW. Not a EFI so it should be doable to reset the PW, am i right ? Can i just flash the newest bios over it or is there somewhere the CMOS battery ? thx !!! ------ found it Red/Black