Iweb archive not working online

I've had church website up and running for a year. Every week I upload a new sermon between 25-30mgs. There are about 52 by now. This time when I went to the site online I noticed the Archive page was is working even though it's working in the program. When you click on the subject nothing happens. Also the "previous" button and other buttons at the bottom are not working either. When I opened the iweb file now the archive button is green. Any suggestions?

Thank you for replying. I had a box with a rule around most of the content on the page. I tried selecting it and sending it into the background. This seemed to be the problem and the archive page is working online for the moment. But in iweb the "archive" icon is still green. What does this mean. If you want to look at the site the URL is www.ccc-hc.org.

Similar Messages

Iweb tabs not working online

For me, using my mac i have no problems navigating my webite thru www.com. When others try and navigate, they can open one (or two?) pages, but after that no hyperlinks will allow them to go any further... any help??
Thanks

If you want to keep the reflection and have it compatible with IE then try the method described in this tutorial, #7 - Converting Photos w/Frames, Drop Shadows and/or Reflections into a Single JPG Image, which is base on information provided by Koeklin in a previous topic. Works like a charm.

IWeb is not working for sending podcasts to iTunes, so I need a new web building tool. What is the closest thing to iWeb that I can use, which also supports podcasts?

iWeb is not working for sending podcasts to iTunes, so I need a new web building tool. What is the closest thing to iWeb that I can use, which also supports podcasts?

There's no reason you can't go on using iWeb for this - with iWeb '08 you have to publish to a local folder (i.e. on your Mac) and then upload the contents of the folder (not the folder itself) to your hosting service: and you have to make sure you enter the new URL in the Publish information or the feed won't work properly; this done, an iWeb podcast should work fine.
Of course there is still the problem that iWeb is not supported and sooner or later a system upgrade may break it. You could look at RapidWeaver: you can make podcasts with that, though the last time I looked into that - which was admittedly some time back - I didn't feel it was ideal for this. There are lots of other podcast creation programs or services around. WordPress is OK but it may be a bit of a steep learning curve: Libsyn is an online service that seems to work reliably. Blogger writes messy feeds but does usually work. Podcast Maker used to work well - I used it myself a few years back - but it rather looks as if it's gone moribund and it may not be reliable with Lion/Mountain Lion, so you would want to check into that.

IWeb is not working!!!!!

My iWeb is not working right!!! All the widgets (exept for iPhoto and iMovie) do not work, every time a place the widget it just shows a selection square were the widget should be. The same thing happends when I chose to show the navigation on the top of the page, just a blank box. I have already called the apple support and tried many different things, like uninstalling iWeb and nothing changed then he took me thought endless steps for hours and nothing. I also went to an apple store and no one there new how to fix it ether. I need this fixed NOW!!!
Please help!!!

I would go to an apple store and talk to someone face to face but the closest one is over 800 miles away. I tried to talk to someone in an apple store wile I was on vacation but that did not have room for me. But I did get a chance to talk to a sales man and he didn't know jack.
I have already uninstalled and reinstalled with the application disk and it did not do anything. I have also tried accessing the widgets on another account and I have the same problem. I could try the download though, that might just work.
I have also had the problem of, when I make a 'blog' the box that should have the blog excerpts Is also blank and I can't even double click it, and when I do it just does what everything else does and shows a blue outline around the box and nothing else.
I wish someone knew something about this problem!

Which parts of iWeb will not work on third-party servers?

Hello,
I'm migrating my site so some new parts
I would like to know exactly which parts of iWeb will not work on third-party servers.

Features Unavailable When Publishing to a Non-Mac Server:
◼ Password protection
◼ Blog and photo comments
◼ Blog search
◼ Hit counter
From iWeb 3's Help
In addition, unless iWeb is modified by Apple or yourself the forward, back, pause and play buttons of the iWeb slideshows will not display once the MMe servers are taken off line:
However, if you follow the directions in this tutorial you can work around that: #26 - How to Modify iWeb So Popup Slideshows Will Work After MobileMe is Discontinued.
OT

Office 2013 Auto Archiving not working

Dear Sir / Madam,
We are using MS OFFICE 2013 with Windows 8.
Problem we face is Auto Archiving not working at all. We have defined all the parameters, still it is not working. We are using Exchange Server and all the emails are Archived to local PST files after a defined time period.
We have defined all the steps required to do Auto Archiving.
Your help is required in this since we have tried all the options.
Paloli Manoj

Hi,
What's the size or your archive.pst file? Please first make sure it's not getting close to 50 GB limit.
If the size far below 50 GB, please try to use the Inbox Repair tool to scan and repair the archive.pst file. If the file is corrupt, the autoarchive will not happen.
http://office.microsoft.com/en-in/outlook-help/repair-outlook-data-files-pst-and-ost-HA102749454.aspx?CTT=1
For more troubleshooting steps, please refer to this:
http://www.howto-outlook.com/faq/archivenotworking.htm
Regards,
Steve Fan
TechNet Community Support

Exchange 2010 - Archiving not working in desired situation

Hi guys!
Recently we had enabled online archiving on Exchange, the problem is that one thing is not working as we have wanted.
We wanted that user picks up manually thru Outlook 2013 client which folder he does not wishes to be moved to archive, but this is not working with our current settings.
These are the settings on server side
bostjanc

ah sorry, its retentionaction not retentiontag so here is the correct parameter
Get-RetentionPolicyTag "Don't Move this*" | Set-RetentionPolicyTag -RetentionAction
"MoveToArchive"
Blog |
Get Your Exchange Powershell Tip of the Day from here

Hyperlink to iWeb Page not working

I have created an iWeb page. I have a hyperlink to the page on a document. The hyperlink takes me to a mobile me error page ie "We can't find the page you requested. Please make sure the URL is spelled and capitalized correctly, and try again."
Yet if I copy and paste the exact same url I have entered in the hyperlink filed into the address bar on Safari it goes to the right page no problems.
Any ideas please?

Is that the page you're trying to link to in the PDF document?
I was able to place a hyperlink in an rtfd text file and and Word 2008 document to your web page that works. The link in the Word document takes about 5 to 7 seconds to get to Safari and open the Page. The rtfd document, created with Bean
Bean, a great, free word processor, opens the page in Safari almost immediately.
In Work I used the Insert ➙ Hyperlink menu option and entered the URL of you page and the text to use as the link. For the Bean document I clicked and dragged the link title at the top of your web page onto the Bean page and saved as a rtfd formatted file. If the page is saved as a plain text document the hyperlink is lost.
Click to view full size
If I do a Print ➙ PDF ➙ Save as PDF from Bean I get a working link in the resulting PDF file. But with Word the link does not work.

Links in blog archive not working

Can anybody help me get more reliable performance from my iWeb archives page?
http://web.mac.com/truthmaker/Site/Blog/Archive.html
I am getting very frustrated with the Archives page for the blog I've created with iWeb. Often -- very, very often, the links on the Archives page for past posts are corrupted -- not by me, but somehow by the software. When these links are clicked, instead of showing the proper link and taking viewers there, the link looks like: http://web.mac.com/truthmaker/Site/Blog/$link$. This of course results in one of two different types of "Page not Found" pages.
One looks like this:
Not Found
http://web.mac.com/truthmaker/Site/Blog/$link$
The requested URL was not found on this server.
お探しのURLはこのサーバーでは見つかりませんでした。
L'URL que vous avez sollicitée n'a pas été trouvée sur ce serveur.
Die URL, die Sie angefordert haben, wurde nicht auf diesem Server gefunden.
The other is a more professional-looking page that says "We're sorry, but we can't find the iWeb page you requested. . . "
This is maddening to the point of being infuriating. These links are not always corrupted, but it seems to happen randomly and frequently. This has nothing to do with my links, which are all fine when published. It appears that this is an issue with MobileMe.
Anybody have any ideas on what I can do? My blog is extensive (more than 100 posts over eight months) and I have lots of people accessing it. The blog serves both personal and professional purposes and I cannot afford or tolerate such spotty performance. Though I love Apple products, this alone is enough to make me cancel my MobileMe subscription and look into web-hosting from a different vendor.
Can anybody help me get more reliable performance from my iWeb archives page?

TruthMaker wrote:
it seems to happen randomly
Did you wait long enough for the 'archive' page to fully load before you clicked on a link ?
If not, then you may have clicked on an incompletely loaded url, resulting in the "not found" MobileMe page. (yes, indeed it's about fractions of a second, that is why it seems to happen randomly)
If this happened in Safari, clear the cache and wait for the page to fully load. Does that help ?
Ps : I can navigate from your archive to the corresponding entry ( tried 4 random links)
For other browsers, if you wait long enough for the page to fully load and then do a "reload page" and again wait long enough ... does that help ?
When you hoover over the links and do get a $links$ move over to the next one, go back... now do you see the correct link ? Not always, but most of the time it's a blog entry with a very long filename.

IWeb 09 not working with Internet Explorer

Spent quite a bit of time creating a site in iWeb 08, which worked fine with Firefox and IE. Decided to upgrade to the '09 version because of few new features (widgets, etc.) Update install went well. No problems using Firefox and Safari but IE now will not work.
Site (home page) can be accessed using IE but links to other pages are not live. A real pain. I did nothing new to site (e.g., did not add widgets, photos, files, etc.) except to add a comment to my blog. A friend told me about the problem. Unsure what version of IE he is using but I tried it using Parallels running XP with IE v.6 and had the same problem.
Do I need to reinstall the '08 version? If so, will it just overwrite '09 or is there some other procedure required to install an earlier version? Any help would be greatly appreciated. Thanks.

Didn't intend this to be as much a venting as a warning to others.
The iLife 09 suite is very flawed. And it's not just iWeb.
iPhoto does not deliver. Face recognition failed to correctly identify even one person in over 250 photos. Not a minor thing since it was trumpeted so loudly at it's announcement.
iMovie corrupted the preview of a project I was working on in a prior version.
Turned it gray and 'staticky'. Starting over now.
I don't see quick fixes coming down the pipe because Apple has been absent from any news or comments for over a month.
So if someone is contemplating an upgrade to iLife09 and happens upon my rant, maybe I've save someone from wasting their money.
As far as knowing what I'm doing?
I've been in IT for 20 years. Unix, Linux, Windows, backup/recovery, etc... I've led a very rich IT life. I bought a Mac because of the 'Just works' promise, not to add another OS to my debugging repertoire.
I can get around the FTP problem manually (another problem with iWeb), but the ftp on 09 was a big reason I purchased it. And the problem with IE and Firefox not being able to even view any iWeb 09 sites now? That's going to be a bit more difficult to fix and is a show stopper.
Apple has not responded to anyone's support questions (including mine), and it's been about a month.
Not even a "Hey customers, we know about the problems and are getting right on it!".
So, when something like this happens, I like to put the word out there on every medium possible. kind of warns people and hopefully get's back to Apple.
And if Apple doesn't monitor these Support Discussions, they really should.
At the very least, my comments may bring up issues others have yet to discover.
And it makes me feel better...

Iweb page not working in Safari

I have just created a website - yellowcobblestones.com using iweb it works perfectly in both firefox and IE but not safari.
The main problem is the tabs located at the top of the page do not work
Thanks

The work OK for me in Safari V 5.1.1. Try emptying the cache and visit the site again.

Search of Personal Onlive Archive Not Working in Outlook or OWA

Whenever I try to search messages content contained in the archive mailbox from Outlook 2010 or OWA 2010, there are zero matches found even when I search for a keyword that I can see in the subject of a message in the archive.
Searching for messages works fine when searching the primary mailbox, but not the Personal Archive Mailbox.
We just enabled Archive mailboxes last week, so this the first time I tried searching and it may have never worked.
What would prevent searching of archive mailboxes from returning any results even when you are sure your are searching for text that is contained in messages in the archive mailbox?

Its not that its not available in Sp2, its that there are some improvements that I saw once Sp3 was installed.
You could always open a case with Microsoft support, though I suspect they would suggest upgrading to Sp3 first.
Note that SP2 is no longer supported after 4/8/2014
I assume that you have rebuilt the search indexes and gone through the usual troubleshooting already.
Twitter!:
Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.
I have not done anything yet. How can archive search indexes be rebuilt?
It would the index of the database itself. If you haven't done this already, you can stop the indexing service, delete the index files themselves on disk ( same dir as the database itself) then restart the index service to rebuild the index and
recrawl.
Twitter!:
Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.
I found a blog with more detailed instructions on how to delete the catalog. So, I deleted it and, an hour or so later, the search of the archive mailbox works in OWA. It is a small database with only a few test pilot users. I assume rebuilding
the index will take longer when we deploy it to everyone.

Sound file not working online

Hi,
Am creating a file for public access through Dropbox. Am on a MacBook running Mountain Lion and using Acrobat Pro X. This is the first time I have tried doing anything more complicated than just creating simple documents.
I created a 2-page document in Pages and saved as a pdf. Then I added a short mp3 through the Multimedia > Sound option. It works well on my computer, but when added to Dropbox, it does not activate (unless downloaded back to computer).
Should it work online? I'm sure it must, so I'm missing something.
Any advice gratefully received,
TIA
Graham

Heidenreich12...see if the info in this link sorts out the problem
http://docs.info.apple.com/article.html?artnum=300832

Subscribing to podcast in iWeb does not work???

I created and exported to iWeb a music podcast using Garage Band. The podcast correctly imported to my iWeb website, so you can visit the site and play the podcast their. This process also creates a "subscribe to podcast" button on the iWeb website, which is supposed to allow visitors to click it and the podcast will automatically be added to their iTunes podcasts library. Well, this partially works, that is, an entry IS made in the iTunes podcasts library, but the entry does not work. It appears to reference the full text page of the podcasts webpage instead of the actual music podcast, so when you try to play the podcast within iTunes you get an error message.
Any ideas? There does not appear to be a way to correctly point the iTunes podcast entry to the actual music podcast on the website instea of the text main page.
Thanks.

Thanks for the offer to help. Here is the website:
http://web.mac.com/mgimbel/iWeb/Site%204/Podcast/Podcast.html
I'm not sure how to find the RSS file to send. ??
In case you're not familiar with the how the process is SUPPOSED to work between Garage Band, iWeb and iTunes, it should be a simple, 3-step AUTOMATED process:
1. in Garage Band, you choose "send podcast to iWeb". This exports the current project to an iWeb page as a podcast. (This works)
2. in iWeb, you publish the newly created page containing the podcast. I use .Mac, so my pages are automatically published to my .Mac account. (This also works)
3. On the webpage at the website containing the podcast, there is a button to "subscribe" to the podcast. When you click this, it is supposed to create a podcast entry in your iTunes library, under My Podcasts. (This is where the process stops working: the entry is created in iTunes, but it does not work - i.e., it does not appear to point correctly to the podcast itself, but instead to the webpage in general that contains the podcast, and iTunes can not identify the podcast from this.)
Hopefully, that helps. Sorry if you were already familiar with the process.
Looking forward to hearing your thoughts on this.

Post read option-archive not working in SFTP proxy service in osb

Hi,
i created SFTP protocol based proxy in osb also make the following option in sftp transport page of proxy,
Post read option :Archive
Archive directory: sftp://vms.oracle.com:22/D2O/osbarchive
Tested throuh WINSCP,files are picking up from input directory and it was succesfully going to output directory that i configured in business service,
bUT ARCHIVE IS NOT HAPPENING,I checked the archive directory after testing but nothing aws therei tried options like checking remotestreaming in sftp transport,that one also not working for me
,Pls help me to solve this issue.
Regards
ABHI

I never thought archiving to be on the remote side... I think archiving is designed to be local...
Have a look at this...
https://forums.oracle.com/forums/ann.jspa?annID=893

Iweb archive not working online

Similar Messages

Maybe you are looking for